Upload
phungkhuong
View
218
Download
1
Embed Size (px)
Citation preview
Pieces Qty Pieces Qty
Left Vertical Panel(3814573)
1Hinge Plates(1608770)
Hinges(NP5M2200)
4
Right Vertical Panel(3814606)
1 4
Backer Board(2901925)
1Plastic Screw Covers(1812256)
8
Top Shelf(3814581)
1 Handle with Screws,#8 x 1-1/4", Phillips(NP5M2100)
2
Bottom Panel(3814614)
1 4
Cleat(3814599)
1Euro Screws, 6mm x 10mm(1602392)
12
Adjustable Shelf(3814565)
1Confirmat Screws, 5mm x 40mm(1602376)
16
Fixed Shelf(3814622)
1Shelf Pins(FG3F80H1CHROM)
4
Left Door(3814648)
1Nails(1608217)
24
Right Door(3814656)
1Hinge Plate Screws,#6 x 5/8"(1602160)
8
Wall Cabinet Divider(3814664)
1Pan Head Screws, #8 x 1/2", Phillips(1604281)
4
Metal Plates(NP5M2400)
4Wood Dowels(1470004)
4
Metal Plate Fasteners with Screws(NP5M2500)
12Wall Mount Screws, #10 x 2", Phillips, Flat Head(1603168)
2
Upright Bracket (L/R) (NP5M2000)
2Door Pads(1811399)
4
Hole Plugs(1812313)
2
Horizontal
HORIZONTAL ADJUSTMENT
Adjusts gap sizebetween doors.
VERTICAL ADJUSTMENT
For doors not flushat top or bottom.
Vertical
Vertical
Horizontal
HORIZONTAL ADJUSTMENT
Adjusts gap sizebetween doors.
VERTICAL ADJUSTMENT
For doors not flushat top or bottom.
Vertical
Vertical
Load Capacity STEP 14
Ensure cabinet is square prior to adjusting hinges.
5M16 – Top Cabinet with Cubbies Assembly Steps
L8-5M16-PO
1/8"
Finished edge
Shelf and Door Assembly Instructions STEP 8
Parts Required• ShelfSupportPins(4)
STEP 9
Parts Required• AdjustableShelf(1)
Bottom
STEP 10 STEP 11
STEP 12 STEP 13
Parts Required• Handles(2)• HandleScrews(4)
Parts Required• HingePlateScrews(8)• DoorPads(4)
Top
Top
Bottom
Bottom
15
15
15
15
30
30
30
30
Upright Mounting120 lbs. total
Wall Mounting60 lbs. total
Rubbermaid Incorporated, Huntersville, NC USA 28078-1801U.S.A. 1-888-895-2110Canada 1-866-595-0525www.rubbermaid.com© 2008 Rubbermaid Incorporated, Huntersville, NC U.S.A. 28078-1801 www.rubbermaid.com
Parts Required• Doors(2)• MetalPlates(4)• MetalPlate Fasteners withScrews(12)
Parts Required• Hinges(4)
Installhingestohingeplates.Repeatforotherside.
Centerhingeplatescrewinhingeslot.
Assembledoorstothecabinet.
Adheredoorpadstotopandbottomcornersofdoors.
STEP 1
STEP 3B
Parts Required• TopPanel(1)• BottomPanel(1)• ConfirmatScrews(8)
Top
Bottom
Top
TopTop
Top
Parts Required• LeftVerticalPanel(1)• RightVerticalPanel(1)• HingePlates(4)• EuroScrews(8)
Bottom
STEP 3A
Parts Required• Cleat(1)• ConfirmatScrews(4)• ScrewCovers(2)
Bottom Bottom
Bottom
STEP 4
Parts Required• ConfirmatScrews(4)• ScrewCovers(4)
STEP 2
Parts Required• UprightBrackets(2)• EuroScrews(4)• PanHeadScrews(4)• HolePlugs(2)
Holes face top of cabinet
Holes face bottom of cabinet
STEP 5
Direct Wall Mount Instructions
Choose Mounting Method
WARNING: SERIOUS INJURY OR DEATH CAN RESULT BY NOT FOLLOWING BELOW INSTRUCTIONS.
STEP 7B Locate studs
STEP 7C
Withtwoormorepeopleholdthecabinetagainstthewalloverthemarkedstudlocations.Predrill(1)holeforawallmountscrewusing1/8"drillbitthroughcleatintostud. Insertonescrewintostudthroughwoodcleat.
Secure cabinet to wall.
Upright Mount Instructions
STEP 7A Hang cabinet on rail.
HAZARD: Use two or more people to install cabinet. Failure to do so can result in back or other injury.
HAZARD: Use two or more people to install cabinet. Failure to do so can result in back or other injury.
STEP 7D
Levelcabinet.Predrillholeforsecondwallmountscrewthroughcleatintostud.Insertthesecondscrewintostudthroughcleat.Ensurecabinetishangingontwostuds.
Secure cabinet to wall.
Finished edgedown all sides
Finished edgedown all sides
Finished edgedown all sides
Finished edgedown all sides
Fixed shelf
Top
Bottom
Finished edgedown all sides
Parts Required• WallCabinetDivider(1)• FixedShelf(1)• WoodDowels(4)
Mounting Instructions
Floor
85"90.75"
30-3/16"
Recommendeduprightmountingheightis90.75".Attachrailtowallperinstructionsprovidedwithrail.(dimensionstotopofrail).
Choose Your Installation Method, Wall Mount or Upright Mount
Upright Mount Instructions Wall Mount Instructions
STEP 6
Parts Required• BackerBoard(1)• Nails(24)
Removeperforationwhen uprightmountedonly.
Bottom
Top
Finished edgedown all sides
Recommendedwallmounting heightis85"foratopcabinet.(dimensionstotopofcabinet).
Tophookshouldbeinsertedinthe2ndopennotchfromthegripperontheinsiderowofnotches.
HAZARD: If upright is not attached to stud, the load claim is null and void.
Important:One upright must be attached to stud.
If two cabinets share an upright it must be attached to stud.
Floor