5.Hazards Control

8/12/2019 5.Hazards Control

1/4

16

HAZARDS CONTROL

In this part, we will eliminate or correct the hazards. Based on this, we choose the Hierarchy of

control to control those hazards under the list evaluation of risk for the compaction activity been

carry on by all the people under building group. Under the Hierarchy of Control where we

would used to Eliminate the Risks ( ER ), Substitute the Risks ( SR ), Isolated the Risks ( IR ),

Personal protective Equipment ( PPE ), Administrative Control (AC) or Away from Hazards

Area ( AFHA ) based on controlling those risks happen to any else.

No.

Procedure /

Step /

Progress

Risks Hazard control

1. -The risk of wet floor is

dangerous for the employees if

they fall down and caused

accident.

-The risk of long and messy hair

is to be stuck where the place has

the potential to present hazards

to employees.

-The risk of wearing sandals,

absence of socks with open end

shoes would be exposed to

greater risk, slipped, exposed to

sharp objects and more.

- The risk of not buttoning long

sleeve shirt or left is hanging

might controlled employees

-Making a notification for warning not to

wear slipper or not to wear any sticky

clothing where can easily stick to the door

latch for entering the lab. ( AC )

- Keep work area clean and clear of debris

and liquids.

- Be aware of everything going on around

you.

- Keep an eye on fellow workers and alert

them of any potential risk/harm.

- Keep the floor and bench tops clean but

do NOT sweep them. Do use the HEPA

vacuum cleaner for DRY dust pickup only.

For cleaning other concrete dust from

surfaces not safely or easily cleaned using

the HEPA vacuum, use a wet rag or mop.


2/4

16

movement and disturb his

concentration.

-The risk of wearing short pants

might exposed to sharp objects

which is harmful to employees.

- Notification for wearing safety boots or

wearing cover shoes before enter the lab.

( PPE )

-No open-toe shoes are allowed in the lab.

-Long pants must be worn whenever there

is risk that heavy or sharp or abrasive

materials could pose a risk of injury.

-Do NOT wear loose clothing or jewelry

that could be caught or entangled in

machinery.

-Tie back long hair wear headwear to

prevent long hair that be caught orentangled in machinery.

2. - Safety training -All persons actively engaged in laboratory

activities must have safety training. The

training shall include the following parts:

-General Laboratory Rules

-Laboratory Experiment Procedures

-Personal protective equipment (PPE)

3. -The risk of broken apparatus

can cause a cut or accident while

it is not handle properly.

-The risk of irregular shape

specimens might hurt employees

because of the sharp edges.

-The risk of insufficient table

space can cause the apparatus or

specimen not placed correctly

-While tools or equipment are being used

properly fitted personal protective

equipment must be worn by the operator

and others in the area.


3/4

16

and drop down, causing accident.

4. -The risk of using spoiled

machine can cause misuse of the

machine.

-The risk of using jaws of load

frame that is not tough can cause

specimens not handled properly

and broken not appropriately,

causing pieces to fly from all

angle, creating dangerous

working environment for

employees.

-The risk of misplacing the

specimen when testing can cause

accident happen.

-All persons in the area where sanding,

grinding, cutting operations are occurring

must wear safety glasses.

-Before use of any powered equipment or

tool, a thorough inspection must be

completed to insure proper working

condition. Make any proper necessary

corrections before use of the equipment.

-Do not use equipment or tool that is

damaged beyond repair or has any safety

features missing (guards). Report damaged

tool/equipment to team captain or safety

advisor for DO NOT OPERATE tag.

-All power cords shall be inspected before

the cord or tool is used, periodically while

being used and when work with the cord or

equipment is done for the day. Any

damaged cord must be taken out of serviceimmediately.

-Only authorized, trained persons may

operate the universal Testing Machine

(UTM)test machine.

5. - . - .

6. -The risk of fracture specimens

flew out can cause miss accident,

minor accident and major

accident if no body equipment is

used.

-All persons in the area where sanding,

grinding, cutting operations are occurring

must wear safety glasses.

7. - . - .


4/4

16

8. -The risk of handing sharp edges

of specimen with bare hands will

cause injury.

-While tools or equipment are being used

properly fitted personal protective

equipment must be worn by the operator

and others in the area.

9. -The risk of careless behaviour

such as losing concentration,

playing or talking might cause

injury which can lead to

accident.

- Create a do and dont list while handling

experiment.

-Employees shall understand safety and

health law and regulations.

10. -Chaos situation caused

employee to step on the

apparatus and fall down, hit or

bump on the apparatus when

next time walk in the lab.

-Making a notification for warning

employees to keep the lab in neat and clean

situation after conducting the lab. (AR)

11. -May cause the machine to

overload or overheat. Thus,

causing the fire.

-Portable power equipment shall be

unplugged when not in use.

12. -The risk is the shirt stuck on thedoor and banging on the door

-Self reminder for beware during exits thelab. (AR)

Documents

5.Hazards Control