Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
58802 Balve, telephone +49 (0) 2375 915-0, fax +49 (0) 2375 915114, Internet www.balverzinn.com, e-mail [email protected]
Chemical laboratory • Conditioning • Metallurgical processes • Metal wholesale • Pure tin anodes, fine lead anodes, lead alloy anodes, cast alloys, solders, solder wires,
targets, fine zinc anodes, zinc wire, zinc alloys (Zn 99.995% with Al, Si, Cu, Ce, La, Ti), anodes made of Cu(el), CuP, Ni, Ag.
Since its foundation, Balver Zinn has worked according to one maxim: quality is
no accident. This applies to the quality of our products and to the quality of co-
operation with our customers. Ultimately, especially for a family enterprise, we
claim to be just that bit closer and friendlier to the environment and always a
little more flexible towards our customers’ needs. This is why many new customers
soon become regular customers.
You can trust in our products. Because we take really good care.
We can give you that in writing: Balver Zinn meets the strict quality guidelines
of ISO 9000*. For you, this means that you can be sure that all areas of the
company, from order receipt through production to dispatch, are subject to a
consistent quality assurance system. Customers of many years’ standing,
though, will perhaps not even have noticed any difference because, basically, we
have already been working in accordance with comparably strict quality
principles since the seventies.
“Balver Zinn meets the strict quality management guidelines of ISO 9000.”
“Quality is no accident.”
*Go to [email protected] for a current QM/UM certificate.
Title photo bottom left: Metoba, Lüdenscheid2
Balver Zinn delivers you the quality you ordered. Be it standard or
customised. We don’t leave anything to chance. In our laboratory,
we conduct research, development and testing. Samples
are continuously taken at all process stages of manu-
facturing for analysis and compliance. Our highly qualified
chemists have a diverse range of analytical methods at
their disposal to assure you a quality product.
An investment that pays off: through your trust in our quality.
Balver Zinn and the environment. Action, not just words.
Protection of the environment is a firm component of our philosophy. This is
why our emissions remain below strict guideline values and why cooling water
in production is a closed circuit. We use renewable raw materials such as
jute and wood, but even then as little as possible. Production waste and
dross are also returned to the production process. It goes without saying that
Balver Zinn is licensed to recycle metals.
BALVER ZINN SURFACE TREATMENT
“Protection of the
environment is a firm
component of our
philosophy.”
High-end electronic pcb manufacturers and industrial electronic companies
throughout the world rely on Balver Zinn’s quality connections. Are you
interested? We will be pleased to send you details of our electronics range.
3
PURE TIN AND TIN ALLOYSPLATE EXTRUDED, CAST AND ROLLED
SOLID WIRES FOR THERMAL SPRAYING
LEAD ALLOY ANODESSTRIP, PROFILED OR SMOOTH
Length Width Height
Extruded, type 1* 100–6000 mm 250 mm 25 mmExtruded, type 2* 100–6000 mm 200 mm 20 mmExtruded, type 3* 100–6000 mm 200 mm 10 mmCast 100–1200 mm 100–290 mm 5–25 mmRolled 100–1200 mm 100–290 mm 5–25 mm
*Optional widths of 100 and 150 mm.Special forms available from 5 to upwards.
Material Dimensions Packaging
Tin-copper ø 1.0–6.0 mm 0.5 to 1.0 kg reelsBabbit ø 1.0–6.0 mm 12.5 rings or 10 kg coiler reelsTin-zinc ø 1.0–6.0 mm Approx. 25 kg ringsPure tin* ø 1.0–6.0 mm 50 kg barrels*Tin-lead ø 1.0–6.0 mm 200 to 250 kg barrels
*Cannot be packed in 200 to 250 kg barrels.Please enquire about smaller diameters.
Type Profile Length
Smooth 10 x 4 to 85 x 15 mmOne-sided
100–6000 mmCorrugated/ribbed 50 x 5 to 75 x 15 mm50 kg ringTwo-sided
Corrugated/ribbed 50 x 20 to 80 x 20mm
Ask for our profile list.4 Photo bottom left: Galvano Röhrig, Solingen
TIN AND TIN ALLOYSBILLETS, EXTRUDED OR CAST
BULKSPHERES, HEMISPHERES, PELLETS, NUGGETS
CAST BLOCK TARGET FOR PVD UND CVD COATINGSPLANAR
LEAD ALLOY ANODESTUBULAR AND SOLID ROD
LEAD ALLOY ANODESWITH READY-MADE CONTACT TOCUSTOMERS’ REQUIREMENTS
BALVER ZINN SURFACE TREATMENT
Type Profile Length
Cast 85 x 65 mm 100–1250 mmCast 85 x 45 mm 100–1000 mmExtruded 80 x 50 mm 100–2000 mm
toExtruded 60 x 20 mm 100–2000 mm
Please enquire about special forms.Ask for our current profile list.
Type Dimensions Packing unit
Spheres ø 50 mm 25 kg boxSpheres ø 40 mm 25 kg boxNugget* ø 20 mm 25 kg boxHemisphere 25 x 50 mm 25 kg boxPellet 12 x 25 mm 25 kg box
Please enquire about other types of packaging.Packed on 100, 250, 500 and 1000 kg pallets.*Available in pure tin only.
Available in pure tin and tin based alloys.
Please let us have your specific requirement.
Type Dimensions Length
Solid rod ø 5–50 mmTube from D/d = 13/10 mm 100–6000 mm
to D/d = 60/40 mm 50 kg ring
Type Dimensions Length
Strip As described above 100–6000 mmSolid rod As described above 100–6000 mmTube As described above 100–6000 mm
h1 = 30 mm 4–5 kg L1 = 495 mm L4 = 190 mmh2 = 65 mm 15–20 kg L2 = 170 mmh3 = 86 mm 25–50 kg L3 = 170 mm
(weight differences depending on the alloy)
5
PC BOARDS/TIN ELECTROPLATINGPC BOARD PRODUCTION
ELECTROPLATING OF WIRE
Balver Zinn pure tin anodes offerexeptional performance due to ourunique multiple pressing extrusionprocess. This manufacturing systemgreatly improves the distribution ofthe dissolution.
For coating component and connec-tor terminal wires, pure tin and tin-lead coatings improve solder-ability. Due to the high current density values involved, the purityand even resolution of Balver Zinnanodes are particularly advantageousin term of process quality. Especiallyfor lead-free coating of lead framesand component terminals, BalverZinn’s range also includes the newtin-copper alloy SN100CP.
Our billets and plates have particu-larly proven themselves as anodeforms for tinning small parts in adrum process. When titaniumbaskets are used, Balver Zinn bulkgoods offer excellent performance.
STANDARD ALLOYS FORMS
Sn 99.9 Plate extruded*Sn 90 Pb Plate rolledSn 70 Pb Billet castSn 63 Pb Billet extruded,
sphere, pellet, hemisphere, nugget*
*Available as pure tin only.
STANDARD ALLOYS FORMS
Sn 99.9 Plate extruded*Sn 95 Pb5 Plate rolledSn 90 Pb10 Billet castSn 70 Pb30 Billet extruded, Sn 63 Pb37 sphere, pellet, hemisphere,SN100CP nugget*
*Available as pure tin only.
STANDARD ALLOYS FORMS
Sn 99.9 Plate extruded*Sn 95 Pb5 Plate rolledSn 90 Pb10 Billet castSn 70 Pb30 Billet extruded, Sn 63 Pb37 sphere, pellet, hemisphere,Sn 50 Zn50 nugget*SN100CP
*Available as pure tin only.
ELECTROPLATING OF BULK GOODS
6
BALVER ZINN SURFACE TREATMENT
SPRAYING/PVD/CASTINGTHERMAL SPRAYING
THIN FILM TECHNOLOGY
CASTING
CHROME PLATING/LEAD ALLOY ANODES
In flame spraying arc spraying pro-cesses Balver Zinn metal sprayingwires are suitable for solder layeringor for the repair of plain bearings etc.
Balver Zinn lead alloy anodes forchrome plating are distinguished bytheir dense and homogeneous material. In the case of anodes withcopper contacts and load-bearingcores, our many years of experiencein the production of the joint to thelead element have paid off—thanksto an optimum current transition and improved durability of the anodes.
STANDARD ALLOYS FORMS
Sn 99.9 Diameter 1.0–6.0 mmSn 97 Cu3 in a ring or barrel or on a reelSn 89 Sb7.5 Cu3.5Sn 60 Pb40Sn 80 Zn20Sn 70 Zn30
STANDARD ALLOYS FORMS
Sn 99.9 Planar targets (produced to customers’ spec.)Sn Zn SbSn Zn
STANDARD ALLOYS FORMS
Main component Blocks weighing 1 kg, 3–25 kgPb 99.985 BarsSn 99.9 Triangular and rectangular rodsAlloy componentsSb, Cu, Ag, Bi, Zn
STANDARD ALLOYS FORMS
PbSn Strip 100–6000 mmPbSb Tube 50 kg ringPbSbAg Solid rodPbSnAg ProfilesPbSnSb
With or without copper contact. With or without insulation.Please ask for our profile list.
Here, Balver Zinn produces materialsto customer specifications in theform of planar targets. Special, high-quality production processes ensurethe purity and homogeneity of thematerials.
Decorative tin, hot-dip tinning,miniature casting etc.—for thevarious casting applications in whichtin alloys are needed, Balver Zinnoffers you an extensive range of possible alloys and forms.
7
LARGE HIGH-PURITY ZINC FORMS
TARGET FOR PVD UND CVDCOATINGSPLANAR
ZINCSPRAYING WIRE
Type Weight
Jumbo forms 500–2000 kgSpecial anode forms 50–500 kg
Material Dimensions Packaging
Zinc ø 0.5–5.0 mm 50, 100, 200, 250, 400 kgZinc-Alu ø 0.5–5.0 mm barrels,Zinc-Mn ø 0.5–5.0 mm 0.5 to 20 kg reelsZinc-Cu-Ti ø 0.5–5.0 mm rings
From 0.5–2.0 mm Ø only up to 200 kg barrel.
Possible in high-purity zinc and variousalloys.
Please enquire about dimensions.
BULK GOODSSPHERE, HEMISPHERE, PELLET,CIRCLE
Type Dimensions Packing unit
Sphere ø 50 mmSphere ø 40 mmHemisphere ø 25 x 50 mmPellet ø 12 x 25 mm Circle ø 100/80 x 20 mm
Packed on 100, 250, 500 and 1000 kg pallets.Please enquire about other types of packaging.
25 kgbox or bagsBox pallets from 1 t
8
Top photo: Thyssen Krupp Steel, Duisburg
ZINCBILLET, CAST WITH/WITHOUTFE OR TI HOOK
CAST FORMSBLOCK/PIG
BALVER ZINN SURFACE TREATMENT
ZINCPLATE, ROLLED OR CAST
SHIPBUILDINGSACRIFICIAL ANODES
Type Profile Length
Full 85 x 65 mm 100–1200 mmHalf 85 x 45 mm 100–1000 mm
Type Length Width Height
Cast 100–1500 mm 100–250 mm 10–25 mmRolled 100–1500 mm 100–300 mm 5–25 mm
Type Weight
Block 5–25 kgPig 7 kg
Please enquire about special forms.
Type Weight Dimensions
Oval shape 0.5 kg Approx. 100 x 60 x 30 mmOval shape 1.0 kg Approx. 120 x 80 x 30 mmOval shape 3.0 kg Approx. 160 x 100 x 45 mmOval shape 9.5 kg Approx. 295 x 160 x 45 mmRectangular shape 0.25 kg Approx. 90 x 30 x 20 mmRectangular shape 4.5 kg Approx. 300 x 90 x 35 mm
9
CORROSION PROTECTION
High-purity zinc anodes with a purity of atleast 99.99% have been in use in corrosion protection in the electroplatingindustry for over twenty years. Due tothe increasing importance of processesand secondary processes (sewage technologies, etc.) that are gentle on theenvironment, the demands on the purityof the metals used has now clearly increased. Balver Zinn, therefore, only
special high-grade zinc Zn 99.995%. Tooptimise process parameters, zinc alloyedwith aluminium can be used here to stabilise the anodes. A further specialfeature of the Balver Zinn range is thediversity of forms available: pellets,hemispheres, balls, billets, cast or rolledplates and special forms are tailored tothe specific requirements of our customers.
For corrosion protection and surface coatings in the area of thermal spraying,Balver Zinn produces high-purity zinc,zinc-aluminium and zinc alloyed wires. Diverse dimensions of the zincwires are available between 0.5 and5.0 mm. Standard packing units consist of barrels, reels or rings. Please enquire
about further types of packing. Specialplanar and round targets are offered forvaporisation (metallisation) of films andglasses which are distinguished by theirpurity and uniformity.
STANDARD ALLOYS FORMS
High-purity zinc 99.995 Jumbo sizes, sphereZnAl 0.2–0.5 Hemispheres, pellets, rounds,
billets, plates
METAL SPRAYING / PVD / CVD
STANDARD ALLOYS FORMS
Zn 99.99 Diameter 0.5–5.0 mmZn Al 1/8"–3/16" in a ring or barrel or on Zn Cu Ti a reelZn Mn
Zn 99.995 Planar and round targets(manufactured to customer specifications)
10 Photo: GTV, Betzdorf
BALVER ZINN SURFACE TREATMENT
CASTING/HOT-DIP GALVANISING/SHIPBUILDING
The Balver Zinn range for diecasting and hot-dip galvanising encompasses a wide spectrum of alloys that are produced in accordance with standardsor to customer specifications and areexclusively made out of pure metals. Youalso have a choice between standardshapes or your own specifications. BalverZinn alloys for diecasting and hot-dip
galvanising are individually manu-factured on request and in accordancewith the state of the art.Sacrificial anodes with cast-in iron stripsfor direct securing to the hull are offeredfor shipbuilding. Special forms can alsobe manufactured to customer specifica-tions.
STANDARD ALLOYS FORMS
Zn 99.995 Bars 1–25 kgZL 0400, ZL 0410, ZL 0430, BilletsZn Al 5, Zn Al 10, Zn Al 15 PlatesZn Al Si BulkZn Ni Large formsZn Cu TiZn with Cu, Ti, Ni, Fe, Snas alloy components
Zn 99.995 Sacrificial anodes (oval or rectangular)
If you want to set standards, you have to have principles
Balver Zinn’s quality philosophy is basedon enviromental awareness, which appliesto all employees from the managingdirector to the trainee. From the produc-tion processes through development tomanagement: product quality, environ-mental orientation, service and reliabilityare the lasting goals by which we assessourselves, and have ourselves assessed,
on a day-to-day basis. This fundamentalfocus, combined with distinct cost consciousness, creates the special addedvalue which our customers acquire alongwith Balver Zinn products.
Call us. We will be pleased to respondto your questions and enquiries.
11