Upload
madarwi-sarwa
View
348
Download
1
Tags:
Embed Size (px)
Citation preview
14-2 115919 SCHELE 56 Series Cat1 114-2 115919 SCHELE 56 Series Cat1 1 25/10/2006 11:41:38 AM25/10/2006 11:41:38 AM
2Isolator & Control Switches - 56SW
1 Pole 6 Pole 10A 63A
Time Delay Switches - 56TD 1 Gang8 16Socket Outlets - 56SO 3 Pin 7 Pin 10A 50A
Changeover SwitchesForward/Reverse Switches 1 Pole 3 Pole 20A 32A 13 18
One Piece CombinationSwitched Socket Outlets - 56CV
3 Pin 7 Pin 10A 50A
Programmable Time Switches - 56TC Quartz Digital 14 21
RCD Protected Outlets- 56C/RCD 3 Pin 10A 20A
Push Buttons - 56PB 1 Gang 14 25Sunset Switches - 56SS10 1 Gang
Appliance Inlets - 56AI 3 Pin 5 Pin 10A 50A15 27
Contents
14-2 115919 SCHELE 56 Series Cat2 214-2 115919 SCHELE 56 Series Cat2 2 25/10/2006 11:41:50 AM25/10/2006 11:41:50 AM
3Lids - 56L 1 6 Gang Module Mounting 36
Straight Plugs - 56PAngled Plugs - 56PA
3 Pin 7 Pin 10A 50A 30
Pendant Enclosures - 56PE
2 Gang 37
DOL Motor Starters - 56MS
230V 400V 39
Cord Connectors - 56CRAppliance Connectors - 56CSC
3 Pin 5 Pin 10A 50A 31
Flush Surrounds - 56FA
1 Gang 4 Gang 37DIN Mounting Covers - 56CB 4 Pole 13 Pole 32
Accessories
Mounting Feet Covers Gaskets 38
Contents
Technical Section
Rating Information Product Master 44
Enclosures - 56E 1 Gang 16 Gang 34
14-2 115919 SCHELE 56 Series Cat3 314-2 115919 SCHELE 56 Series Cat3 3 25/10/2006 11:42:10 AM25/10/2006 11:42:10 AM
4Get the Facts
Superior Impact StrengthThe high-impact strength polycarbonate material used in the manufacture of the 56 Series has a proven superior impact strength. 56 Series is proven and tested to operate in extreme temperatures from -40 to 55+.
High Level of Switch PerformanceIt is important to be aware that there are major differences in standard specifi cations used to specify switch motor ratings. Most of PDLs 56 Series switches carry AC23A and AC3 motor ratings to IEC60947-3 and are capable of making up to 8 times and breaking up to 10 times their rated current, which makes them suitable for DOL switching of motors. A motor kilowatt rating is also given for each switch size. Switches carrying an M rating only have to pass a few operations at the M current stated, which is to prove an equivalent to locked rotor, not motor switching.
Specially Formulated Chemical ResistanceFor those environments where harsh chemicals are used such as abattoirs, dairy and food processing industries, plastic with special chemical resistant properties is required. PDLs chemically resistant orange and white 56 Series has been developed with leading plastic material suppliers and has been tried and proven, offering overall greater resistance to chemical attack than common plastic materials. These products are easily distinguished from standard 56 Series electric grey units by their industrial orange and white colours. In these harsh environments, you cannot do better than a specialist chemically resistant product anything else is not worth the risk. For fi ner detail of specifi c aggressive chemical environments, contact your local PDL representative.
For over 25 years 56 Series has earned a reputation for top performance in resistance to the harsh treatment of industrial environments.
MADE IN NZ
14-2 115919 SCHELE 56 Series Cat4 414-2 115919 SCHELE 56 Series Cat4 4 25/10/2006 11:42:26 AM25/10/2006 11:42:26 AM
5Greater UV ResistanceAfter years of service exposed to very high UV conditions, it has become accepted that PDLs 56 Series offers excellent protection against UV discolouration and degradation a higher degree of protection than comparable products.
Full Range of Matching GearPDLs 56 Series accessories can be matched throughout a project with switches, socket outlets and switched socket combinations, RCD outlets, a range of enclosures and blank lids, plus the associated plugs. The Series covers single and three phase accessories, 3-pin to 7-pin 10A to 20A sockets, 3-pin to 5-pin 32A to 50A sockets and 10A to 63A switches.
Modules Make Assembly SimpleBased upon a standard 100 x 100mm module for all plate-type accessories, PDLs 56 Series lets you build up any combination from a simple switch or socket outlet to a full 16-gang switching station, power outlet centre or custom electrical/electronic assembly using modules and one of a wide range of matching enclosures. Matching blank lids can enclose delicate switchgear or be modifi ed to carry custom panel equipment.
Quick, Easy and Safe WiringProducts in the Series feature large capacity terminals, big, backed-off terminal screws and, wherever appropriate, factory pre-wiring.
Solvent Bonding CapabilityPDLs PVC enclosures are able to be solvent bonded to standard PVC conduit fi ttings. Caution should always be applied when silicon sealants are being used. Only use recommended silicon sealants: Dow Corning 732; Dow Corning 1080; Dow Corning 739 Plastic Adhesive; Selleys Window and Glass Sealant. Any silicon sealant which states Not for use with some plastics defi nitely should not be used. If in doubt contact your PDL representative.
Proven IP66 ProtectionPDLs 56 Series has been both laboratory tested and fi eld proven to offer a degree of weather protection to IP66 (see below). 56 Series socket outlets in particular have a patented self-locking latch feature to ensure that this degree of protection is maintained when the product is not in use a feature not found with comparable product. This means that even when a 56 Series socket outlet is hosed down with a high pressure hose in industry for example, the socket fl ap will remain latched, ensuring its IP66 protection is maintained.
IPx6
IP6x
LIQUIDS
6Protected againstheavy seas or astrong jet of waterfrom all practicaldirections.
SOLIDS
6Completelyprotectedagainstdust.
14-2 115919 SCHELE 56 Series Cat5 514-2 115919 SCHELE 56 Series Cat5 5 25/10/2006 11:42:31 AM25/10/2006 11:42:31 AM
6PDLs 56 Series ... Rated No 1!
Non-perishable synthetic gaskets
Neon indicator optionin switches (56SW)
in switches (56SW)
Rotary ON/OFF switch
Modular system for 1 to 16 gang arrangements
Clear indication of switch position
Keylock switch option available
Captive plate screws
Electrical rating andspecification are clearly displayed
Transparent flap clearlyshows pin configuration
Plug locking ring maintainsIP66 protection while in use
High impact resistant UVstabilised polycarbonate
18 ratings and pinconfigurations to AS/NZS3123
Socket cover snaps shut automaticallyand locks to provide IP66 protection
Total IP66 sealing fromconduit entry to plug cable
Screw caps eliminate dirt
Available in high impact electric grey orchemically resistant
orange and white finishes
Padlock ON/OFF facility
Chemically Resistant White 56 Series
With features designed to outperform all other protected accessories
DEFINING MOMENTS IN HISTORY:
198156 SeriesTM released to the NZ market with a range of 22 items.
1982Won the prestigious Prince Phillip Award for Industrial Design.
1983Major range expansion with dozens of new items introduced including the one piece combination outlets 56CVs by mid-1984 over 300 items in the range.
1984Internationally demanded, PDL Industries in Malaysia producing for British standard markets as well as large export business produced from Christchurch, NZ.
1989Re-rated from IP56 to IP66.
1992Chemically resistant orange valox introduced.
1993Continually adding new product solutions: time switches, RCDs.
1999Chemically resistant white products introduced.
2003Single phase plugs and connectors fully redesigned to meet todays requirements along with more new items including DIN mount covers and boards.
2005Christchurch factory relocates to new premises the production of over 700 items for the NZ market and over 400 items for international export has new headquarters.
2006Celebrates 25 years.
14-2 115919 SCHELE 56 Series Cat6 614-2 115919 SCHELE 56 Series Cat6 6 25/10/2006 11:42:41 AM25/10/2006 11:42:41 AM
7This Edition
The 2006 edition of the PDL 56 Series product catalogue includes a number of new products, innovations, and improvements.
NEW CONTENTS SECTION: PAGE 2 & 3> Pictorial guide for fast fi nding.
NEW PORTABLE PROTECTED OUTLETS: PAGE 26> Weve gone mobile for the building and trade industry.
NEW SWITCHED PENDANT OUTLETS: PAGE 30> IP66 rated switching connector, a product with innovation,
safety, and robustness.
NEW TECHNICAL SECTION: PAGE 44> Explanations, tables and data on chemical resistance,
switch ratings, international protection ratings and more.
NEW 56 SERIES PRODUCT MASTER: PAGE 51> The ultimate guide to what products match each other.
As well as these highlights this catalogue presents: The new high pressure gaskets 56HPG Series The new 15A rated products: plugs, connectors, appliance inlets The new auto-switching socket outlets The new 3 and 4 gang fl ush surrounds 56FA Series A new accessories section detailing spare parts availability All the existing product and ratings information that makes the PDL 56 Series number 1
Available
Early2007
14-2 115919 SCHELE 56 Series Cat7 714-2 115919 SCHELE 56 Series Cat7 7 25/10/2006 11:42:44 AM25/10/2006 11:42:44 AM
8DimensionalDrawings
Switches to IP66
Cat No 56SW110 56SW110/2 56SW110/2I 56SW210
Rated Operational Voltage Ue (~50Hz) Volts 240 240 240 240
Rated Thermal Current Enclosed Amps 10 10 10 10
Wiring Diagram A B C D
Description 1 way Single Pole
2 way Single Pole
Intermediate Changeover
1 way Double Pole
Cable Cross Sections
Solid or Stranded
Min (mm2)
Max (mm2)
0.75
6
0.75
6
0.75
6
0.75
6
Switch Ratings @ AS/NZS3133
0.4pf Inductive
250V M Rating
10AX
M50
10AX
M50
10AX
M40
10AX
M40
Switch Ratings @ BS3676 250V Fluorescent 8AX 8AX 8AX 8AX
OPTIONS AVAILABLE:NEON specify N after catalogue number
eg: 56SW110NKEYLOCK specify K or 2K after 56SW
eg: 56SWK220 Keylock versions of all PDL switches except the Forward/Reverse, Changeover switches and KG series switches are available.
Key removable in the OFF position only Specify K after the series number eg: 56SWK110. Key removable in the OFF and ON positions Specify 2K after the series number eg: 56SW2K110. Common keyed barrels and keys are available to order for all 56 Series Keylock versions Specify C after the series number eg: 56SWKC110.
YELLOW COVER/RED KNOB for isolating switches Specify YELLOW
after catalogue number eg: 56SW363/2 YELLOW
Combinations of the above are available.Note: All products are sold less enclosure (LE) as standard.
94mm
94m
28mm
20mm
56SW110N
56SW110RW 56SW216NGY
FEATURES: 1 and 2 pole up to 50A Cover mounted switch mechanisms Comprehensive switch ratings IP66 weather protection rating Dual padlocking points Long-life synthetic gasket
DimensionalDrawings
240V SwitchesPDLs comprehensive range of 240V Switches ensures that there is always a suitable switch available for every single phase application. They are available in high impact grey and chemically resistant orange and white. Specify GY, RO or RW.
56SWK110RO
14-2 115919 SCHELE 56 Series Cat8 814-2 115919 SCHELE 56 Series Cat8 8 25/10/2006 11:42:55 AM25/10/2006 11:42:55 AM
9Cat No 56SW116 56SW216 56SW120 56SW220 56SW132 56SW232 56SW150 56SW250
Rated Operational Voltage Ue (~50Hz) Volts 240 240 240 240 240 240 240 240
Rated Thermal Current Enclosed Amps 16 16 20 20 32 32 50 50
Wiring Diagrams A D A D A D A D
Description 1 way Single Pole
1 way Double Pole
1 way Single Pole
1 way Double Pole
1 way Single Pole
1 way Double Pole
1 way Single Pole
1 way Double Pole
Switch Disconnector
Cable Cross Sections
Solid or Stranded
Min (mm2)
Max (mm2)
0.75
6
1
16
1
16
1
16
1
16
1
16
6
35
6
35
Switch Ratings @ AS/NZS31330.4pf Induction250V M Rating
16AX
M120
16AX
M120
20AX
M150
20AX
M150
32AX
M180
32AX
M180
50AX
M250
50AX
M250
Switch Ratings @ BS3676
250V Fluorescent 16AX 16AX 20AX 20AX 32AX 32AX --- ---
Switch Ratings @ IEC 60947-3
AC23A 240V
AC3 240V
kW
Amps
kW
Amps
2.2
15
1.5
11
2.2
15
1.5
11
3.0
21
2.2
15
3.0
21
2.2
15
4.0
28
3.0
21
4.0
28
3.0
21
5.5
35
4.0
28
5.5
35
4.0
28
no neon option
no neon option
no neon option
Wiring Diagrams
2 waySingle Pole
1 waySingle Pole
A B
IntermediateChangeover
1 wayDouble Pole
C D
56SW232RO 56SW250RO
NOTES:
AC23A Switch of motor loads or
other highly inductive loads.
AC3 Squirrel-cage motors: switch
off motors during running
most typical industrial
applications.
More info: Pages 4 and 45
Switches to IP66
1
C
1 2
C
1
2
3
4
1
2
3
4
56SW2KC110NGY
14-2 115919 SCHELE 56 Series Cat9 914-2 115919 SCHELE 56 Series Cat9 9 25/10/2006 11:43:01 AM25/10/2006 11:43:01 AM
10
DimensionalDrawings
415V SwitchesAll of PDLs extensive range of 415V Switches are fully motor rated to AC23A and AC3, making them suitable for switching the harshest loads likely to be found in industry. They are available in high impact grey and chemically resistant orange and white. Specify GY, RO or RW.OPTIONS AVAILABLE:NEON specify N after catalogue number
eg: 56SW310NKEYLOCK specify K or 2K or KC after
56SW eg: 56SWK332Refer to page 8 for detail.
Note: All products are sold less enclosure (LE) as standard.
Cat No 56SW310 56SW316 56SW320 56SW332
Rated Operational VoltageUe (~50Hz) Volts 415 415 415 415
Rated Insulation VoltageUi (~50Hz) Volts 660 660 660 660
Rate Impulse Withstand VoltageUimp (~50Hz) kV 2.5 2.5 2.5 2.5
Rated Thermal Current Enclosed Amps 10 16 20 32
Rated Duty Uninterrupted Uninterrupted Uninterrupted Uninterrupted
Description 3 Pole 3 Pole 3 Pole 3 Pole
Switch Disconnector
Cable Cross SectionSolid or Stranded mm2
MinMax
116
116
116
116
Switch Ratings @ AS/NZS3133500V M Rating M100 M120 M150 M180
Switch Rating @ IEC60947-3
AC21A 415V
AC23A 415V
AC3 415V
DC21A 32V
Amps
kWAmps
kWAmps
Amps
10
5.511
4.08.5
10
16
7.515
5.511
16
20
1121
7.515
20
32
1528
1121
32
Rated Short Time Withstand Current1 second kA 1.5 1.5 1.5 1.5
Rated Short Circuit Making Capacity kAp 1.0 1.0 1.0 1.0
56SW332
94mm
94mm
28mm
20mm
94mm
94mm
28mm
20mm
20mm
56SWK320
56SW320GY 56SW332RW 56SW363/2RW
FEATURES: 3 pole up to 63A Cover mounted switch mechanisms Comprehensive switch ratings Larger rated items (50A+63A) available
in 2 gang cover IP66 weather protection rating Dual padlocking points Long-life synthetic gasket
Switches to IP66
14-2 115919 SCHELE 56 Series Cat10 1014-2 115919 SCHELE 56 Series Cat10 10 25/10/2006 11:43:10 AM25/10/2006 11:43:10 AM
11
Cat No 56SW340 56SW350 56SW350/2 56SW363/2
Rated Operational VoltageUe (~50Hz) Volts 415 415 415 415
Rated Insulation VoltageUi (~50Hz) Volts 660 660 660 660
Rate Impulse Withstand VoltageUimp (~50Hz) kV 2.5 2.5 2.5 2.5
Rated Thermal Current Enclosed Amps 40 50 50 63
Rated Duty Uninterrupted Uninterrupted Uninterrupted Uninterrupted
Description 3 Pole 3 Pole 3 Pole 3 Pole
Switch Disconnector
Cable Cross SectionSolid or Stranded mm2
MinMax
635
635
635
635
Switch Ratings @ AS/NZS3133500V M Rating M200 M250 M250 M300
Switch Rating @ IEC60947-3
AC21A 415V
AC23A 415V
AC3 415V
DC21A 32V
Amps
kWAmps
kWAmps
Amps
40
18.535
1528
40
50
18.535
1528
50
50
18.535
1528
50
63
2245
18.535
63
Rated Short Time Withstand Current1 second kA 1.5 1.5 1.5 1.5
Rated Short Circuit Making Capacity kAp 2.1 2.1 2.1 2.1
Auxiliary Contacts for 56SW350/2 and 56SW363/2
Cat No 56SW01 56SW15
Rated Operational VoltageUe (~50Hz) Volts 125 or 250 250
Rated Thermal CurrentEnclosed Amps 0.1 at 125V
0.05 at 250V15
Terminal Type Screw Screw
Description Single Pole Single Pole
Contacts 1 N/O & 1 N/C 1 N/O & 1 N/C
Contact Type Gold Nickel/Silver
PDL offer two clip-on auxiliary contacts suitable for use with the 56SW350/2 and 56SW363/2. Both auxiliaries are easily clipped to the top of the switches and are suitable for control applications such as PLCs.
94mm
190mm
28mm
20mm
18mm
56SW363/2
Wiring Diagrams
1 wayTriple Pole
FEATURES: Clip-on auxiliaries cover both LV and
ELV applications
NOTES:
AC21A Switch of AC Resistive loads,
including moderate overloads.
AC23A Switch of motor loads or other
highly inductive loads.
AC3 Squirrel-cage motors: switch
off motors during running
most typical industrial
applications.
DC21A Switch of DC Resistive loads,
including moderate overloads.
More info: Pages 4 and 45
Switches to IP66
DimensionalDrawings
14-2 115919 SCHELE 56 Series Cat11 1114-2 115919 SCHELE 56 Series Cat11 11 25/10/2006 11:43:16 AM25/10/2006 11:43:16 AM
12
DimensionalDrawings
500V KG Switches PDL has utilised the proven Kraus and Naimer KG Series of switches in this range of 56 Series switches. 56SW320/KG and 56SW332/KG suit 56E1 enclosures, 56SW340/KG and 56SW363/KG require a 56E2 enclosure to provide adequate wiring room. Specialist genuine 4 and 6 pole switches available. They are available in high impact grey and chemically resistant orange and white. Specify GY, RO or RW.
Cat No 56SW320KG 56SW332KG 56SW340KG 56SW363KG 56SW420KG 56SW432KG 56SW620KG
Rated Operational VoltageUe (~50Hz) Volts 500 500 500 500 500 500 500
Rated Insulation VoltageUi (~50Hz) Volts 690 690 690 690 690 690 690
Rated Thermal Current Enclosed Amps 20 32 40 63 20 32 20
Wiring Diagram A A A A B B C
Cable Cross Section
Solid or Stranded mm2Min
Max
1
6
1
6
1.5
16
1.5
16
1
6
1
6
1
2 x 2.5
Switch Rating @ IEC60947-3
AC21A 415V
AC23A 415V
AC3 415V
DC22A 115V
Amps
kWAmps
kWAmps
Amps
20
7.515
5.511
16
32
1121
7.515
25
40
1528
1121
32
63
2245
18.535
-
20
1121
5.511
16
32
1121
7.515
25
20
7.514
5.511
16
Max. Fuse Size Amps 35 35 50 80 35 35 25
Rated Short Time Withstand Current 1 Second Amps 350 430 500 950 350 430 140
Rated Short Circuit Making Capacity kAp 2.2 2.2 5 5 2.2 2.2 2.2
NOTE: KG switches are not available in NEON
or KEYLOCK versions Both 56SW420KG and 56SW432KG are
available to suit 56E1 and 56E2 enclosures To order specify 56SW4##/2KG for a
56E2 enclosure All products are sold less enclosure (LE)
as standard
94mm
94mm
28mm
40mm
WiringDiagrams
A
B
56SW420KGRO 56SW432/2KGRW 56SW332KGGY
C
500V KG Switches IP66
3 Pole
4 Pole
6 Pole
56SW332KG
14-2 115919 SCHELE 56 Series Cat12 1214-2 115919 SCHELE 56 Series Cat12 12 25/10/2006 11:43:19 AM25/10/2006 11:43:19 AM
13
A range of IP66 Changeover and Forward/Reverse switches ideal for generators, auto/manual systems, fans, doors and conveyors. Each switch comes with a sheet of adhesive labels for the end user to select the appropriate cover markings for the specifi c application. Cover markings possible include:I, II FWD, REV MAN, AUTO AUX, MAIN UP, DOWNControl Switches are supplied as a standard 100 x 100 one gang module less enclosure.
FEATURES: IP66 rated Comprehensive switch ratings Grey (GY), orange (RO), and white
(RW) available All products are sold less enclosure (LE)
as standard
Changeover and Forward/Reverse Switches IP66
Cat No 56SW120CO 56SW320CO 56SW332CO 56SW320FR
Rated Operational VoltageUe (~50Hz) Volts 500 500 500 500
Rated Insulation VoltageUi (~50Hz) Volts 690 690 690 690
Rated Thermal CurrentEnclosed Amps 20 20 32 20
Description 1 PoleChangeover
3 PoleChangeover
3 PoleChangeover
3 PoleReversing
Wiring Diagram A B B C
Cable Cross SectionSolid or Stranded mm2 2 x 2.5 2 x 2.5 2 x 6 2 x 2.5
Switch Rating @ IEC60947-3
AC21A 500V
AC23A 415V 3 Phase 240V 1 Phase
AC3 415V 3 Phase 240V 1 Phase
AC4 415V 3 Phase 240V 1 Phase
DC21A 24V
DC22A 24V
Amps
kWkW
kWkW
kWkW
Amps
Amps
20
-2.5
-2.2
-0.75
20
12
20
7.5-
5.5-
1.5-
20
12
32
15-
11-
5.5-
32
25
20
7.5-
5.5-
1.5-
20
12
Max. Fuse Size Amps 25 25 35 25
Rated Short Time Withstand Current 1 Second Amps 140 140 480 140
Rated Short CircuitMaking Capacity kAp 5 5 5 5
94mm
94mm
42mm
30mm
56SW320FR & 56SW320CO
WiringDiagrams 56SW320FRRO 56SW120CORW
NOTES:
AC21A Switch of AC Resistive loads,
including moderate overloads.
AC23A Switch of motor loads or other
highly inductive loads.
AC3 Squirrel-cage motors: switch
off motors during running
most typical industrial
applications.
AC4 Squirrel-cage motors:
including reversing, plugging
and inching.
DC21A As for AC21A but for DC loads.
DC22A Switch of inductive DC loads.
More info: Pages 4 and 45
DimensionalDrawings
Control Switches IP66
A
B
Single Pole ChangeoverSwitch, Double
Throw with Centre Off
Triple Pole ChangeoverSwitch, Double Throw
with Centre Off
C
14-2 115919 SCHELE 56 Series Cat13 1314-2 115919 SCHELE 56 Series Cat13 13 25/10/2006 11:43:23 AM25/10/2006 11:43:23 AM
14
DimensionalDrawings
PDL 56 Series Time Switches feature 24 hour and 7 day timers for the automatic time switching of process control equipment, heaters, pumps and lighting in domestic, commercial and industrial situations.
These timers are supplied in a standard 1 gang 56 Series cover for use with 56 Series deep enclosures. Supplied with a padlocking clip to enable the fl ap to be locked closed.
Cat No 56TC24HB 56TC7DB 56TCU
Description 24 Hour Quartz 7 Day Quartz 24 Hour and 7 Day Digital
Rated Operational VoltageUe (~50Hz) Volts 230 240 230 240 230 240
Switching CapacityMaximum Resistive
Maximum Inductive
Maximum Incandescent
Minimum Switching Load
Amps
Amps
Watts
mA
16
8
1350
100
16
8
1350
100
16
2.5
1000
100
Accuracy 2.5 Sec Per Day 2.5 Sec Per Day 2.5 Sec Per Day
Running Reserve 150 Hours 150 Hours 150 Hours
Minimum Switching Time 15 Minutes 2 Hours 1 Minute
Programming Spaces - - 42 (21 on/21 off)
Cable Cross Section
Solid or Stranded mm2Min
Max
0.75
6
0.75
6
0.75
6
Cat No 56PB1/G 56PB1/R 56PB2G/R
Rated Operational VoltageUe (~50Hz) Volts 250 250 250
Rated Thermal CurrentEnclosed Amps 16 16 16
Diagrams
Push Button Colour 1 x Green 1 x Red 1x Green, 1 x Red
Cover Markings Start/Stop
Cable Cross Section
Solid or Stranded mm2Min
Max
0.75
6
0.75
6
0.75
6
Utilisation CategoryFeed Control of ContactorsElectro-Magnets and Valves
AC11 250V
415V
Amps
Amps
4
2
4
2
4
2
PDL 56 Series push button switches can be used for remote switching of control gear or motor starters. These switches are supplied in a standard 56 Series one gang cover for use with 56 Series enclosures.
1 N/O and 1 N/CMomentaryContactPush Button
2 N/O and 2 N/CMomentaryContactPush Button
95m
95mm
20mm
28mm
20mm
95mm
95mm
28mm
20mm56PB1/R
56PB2G/R
94mm
94mm
28mm
30mm56TC24HB
56TCU 56TC24HBRO 56PB2GRGY
Time Switches IP66
Momentary Contact Switches
1 2C 1 2C
14-2 115919 SCHELE 56 Series Cat14 1414-2 115919 SCHELE 56 Series Cat14 14 25/10/2006 11:43:28 AM25/10/2006 11:43:28 AM
15
PDL now offers two products in this area, the traditional PDL 56 Series sunset switch rated to IP66, and the new PDL WP Series IP56 rated sunset switch with installer selectable timer. These photoelectric cell light sensors are designed to switch a load on at dusk and off at dawn. They are ideal for outdoor lighting, pool timers, water features, entry and security applications, building management, and community control applications. They have built-in time delays to reduce nuisance switching from brief exposure to lights or shadows.
Cat No 56SS10 WDL10
Rated OperationalVoltage Ue (~50Hz) Volts 240 240
Switching Capacity
Maximum Resistive
Maximum Incandescent
Maximum Halogen
Maximum Inductive
Maximum Fluorescent
Amps
Watts
Amps
Amps
Amps
10
2000
8
2
10
2400
8
6
6
Switching Light Level (Lux) Factory Preset to 50 Lux
Factory Preset to 50 Lux With calibration dial adjustment 20 to 100 Lux
Timer n/a 6 position: ONDusk to Dawn, 2H, 4H, 6H, 8H
Bicolour LED n/a Green - power Red - daylight switch/timer operating
Cable Cross Sections
Solid or Stranded mm2Min
Max
0.75
6
0.75
6
Operating Temp degC -10 to 45 -10 to 45
IP Rating IP66 IP56
The 56 Series product is either supplied with an enclosure (56SS10WE) or less enclosure (56SS10) for use with any 56 Series enclosure combination; the WP Series product comes as standard with base and accessory pack included.Set up and installation is made easy with both products. The 56 Series comes supplied with a black daylight test cover, and the WP Series has a Bicolour LED for switching identifi cation, and a user selectable timer, with the ability to control the delay off or permanently on functions at the turn of a dial. Available grey (GY) only.
95mm
95mm
SINGLE PHASE50Hz IP 66
28mm
28mm
56SS10
WDL1056SS10WE
Sunset Switches
DimensionalDrawings
14-2 115919 SCHELE 56 Series Cat15 1514-2 115919 SCHELE 56 Series Cat15 15 25/10/2006 11:43:35 AM25/10/2006 11:43:35 AM
16
DimensionalDrawings
Cat No 56TD 648TM*
Description Adjustable electronic time delay for switching load for a preset time
Preset Countdown Timer
Rated Operational Voltage (~50Hz) Volts 230 240 230 240
Switching Capacity
Maximum Resistive
Maximum Incandescent
Maximum Inductive
Amps
Watts
Amps
10
2000
6
3
Time Selection Range 1 second to 31.5 hours 15 seconds to 120 minutes
Push Button Colour Blue Silver
LED Indicator - Blue
Cable Cross Section
Solid or Stranded mm2Min
Max
0.75
6
-
-
The old PDL 56 Series preset countdown timers have been superseded by the new modular time delay device. The 648TM fi ts the 56 Series module mounting covers and can be installer preset to suit the application.56TD available grey (GY) only.
PDL 56 Series Time Delay allows a load to be switched for a preset time interval. Ideal for controlling lighting and heating in commercial and industrial situations. Time Delay is supplied in a standard 1 gang cover for use with any 56 Series enclosure combination.
95mm
95mm
28mm
35mm
56TD
56TD 56MO500/1 with 648TM
94mm
94mm
30mm28mm
56MO500/156MO500/2
* Fits to 56MO500 module mounting covers and can be used with the 600RM relay module to obtain up to 16A resistive load.
Time Delay IP66
14-2 115919 SCHELE 56 Series Cat16 1614-2 115919 SCHELE 56 Series Cat16 16 25/10/2006 11:43:41 AM25/10/2006 11:43:41 AM
17
NOTE: Product information page 32
NOTE: Product information page 30
Distribution Solutionto IP66
Ordering information: Stock codes: 56SPO310 56SPO315
Available: Early 2007 in Resistant Orange (RO) Only
The PDL 56 SeriesTM now includes a switchedpendant outlet that combines:Safety: IP66 protected, with the ability to disconnect supply without unplugging and from a prominent location.Performance:240V 10A & 15A rated options, double pole.& Functionality:Check these features:c Positive activating slide switchc New easy-use connector flapc Built-in hanging facilityc Ample wiring roomc Easy assembly (patent pending) for speed of installationc Optional neon indicationFor further information contact customer services on 0800 652 999www.pdl.co.nz
Switching Connector New IP66 Switched Pendant
Ordering Information:Stock code: 56CB13 Available in grey as standard with orange & white available on request
Weather Protected Distribution Board
IP66 Up to 13 Way (18mm accessories) Additional wiring space both top/bottom Supplied with Base (56E6 size) with
dedicated conduit entries Supplied fitted with DIN rail, Earth, and
Neutral (2) bars Transparent cover flap Lockable cover Based on industry proven technology and
part of the modular PDL 56 Series Complies with AS/NZS3439.3
14-2 115919 SCHELE 56 Series Cat17 1714-2 115919 SCHELE 56 Series Cat17 17 25/10/2006 11:43:50 AM25/10/2006 11:43:50 AM
18
DimensionalDrawings
PDL 56 Series 110 250V Socket Outlets feature a transparent hinged fl ap which snaps shut and locks over the socket when the plug is withdrawn, forming an automatic IP66 seal. The fl ap is transparent so the pin confi guration can be readily identifi ed without opening.
They are available in high impact grey and chemically resistant orange and white. Specify GY, RO or RW.Note: All products are sold less enclosure (LE) as standard.
Cat No 56SO310 56SO310/2 56SO310R 56S0310A 56SO315 56S0315A 56SO320F
Rated Operational Voltage Ue (~50Hz) Volts 250 250 250 250 250 250 250
Rated Thermal Current Enclosed Amps 10 10 10 10 15 15 20
Number of Socket Pins(Including Earth )
3 (Flat) 3 (Flat) 3 (2 Flat &Round Earth)
3 (Flat) 3 (Flat) 3 (Flat) 3 (Flat)
Description NZ/Aust NZ/Aust Twin Socket
NZ/Aust Round Earth
NZ/Aust Auto Switched Double Pole
NZ/Aust NZ/Aust Auto Switched Double Pole
NZ/Aust 3 Large FlatPin
Socket Confi guration refer Pg 51 A A B A D D E
Cable Cross Sections
Solid or Stranded mm2Min
Max
0.75
10
0.75
10
0.75
10
0.75
10
0.75
10
0.75
10
0.75
10
IP Rating IP66 IP66 IP66 IP66 IP66 IP66 IP66
Cat No 56SO313 56SO316/110 56SO316/240 56SO320 56SO332
Rated Operational Voltage Ue (~50Hz) Volts 250 110 Yellow 230 Blue 250 250
Rated Thermal Current Enclosed Amps 13 16 16 20 32
Number of Socket Pins (Including Earth )
3 (Square) 3 (Round) 3 (Round) 3 (Round) 3 (Round)
Description BS Square Pin Outlet
CEE17 - 4h CEE17 - 6h AS/NZS3123 AS/NZS3123
Socket Confi guration refer Pg 51 C V W F G
Cable Cross Sections
Solid or Stranded mm2Min
Max
0.75
10
0.75
6
0.75
6
1.0
10
1.0
16
IP Rating IP66 IP66 No Plug IP44 with Plug
IP66 No Plug IP44 with Plug
IP66 IP66
110 250V Socket Outlets
56SO320RW 56SO310/2RO 56SO316/110GY
56SO310
56SO310/2
NOTES:
For pin confi gurations refer to
inside back cover 56 SeriesTM
Product Master Page 51
Socket Outlets IP66
95mm
95mm
28mm
25mm
95mm
190mm
28mm
25mm
14-2 115919 SCHELE 56 Series Cat18 1814-2 115919 SCHELE 56 Series Cat18 18 25/10/2006 11:44:08 AM25/10/2006 11:44:08 AM
19
DimensionalDrawings
Socket units are supplied as a standard 100 x 100 one gang module for use with 56E1 enclosures or combining with other accessories in a larger enclosure. They are available in high impact grey and chemically
Cat No 56SO416 56SO416K* 56SO420 56SO432 56SO440 56SO450
Rated Operational Voltage Ue (~50Hz) Volts 500 500 500 500 500 500
Rated Thermal Current Enclosed Amps 16 16 20 32 40 50
Number of Socket Pins (Including Earth ) 4 4 4 4 4 4
Socket Confi guration refer Pg 51 H I J K L M
Cable Cross SectionSolid or Stranded mm2
MinMax
110
110
110
116
116
425
IP Rating IP66 IP66 IP66 IP66 IP66 IP66
Cat No 56SO516 56SO520 56SO532 56SO540 56SO550 56SO616 56SO716 56SO720
Rated Operational Voltage Ue (~50Hz) Volts 500 500 500 500 500 500 500 500
Rated Thermal Current Enclosed Amps 16 20 32 40 50 16 16 20
Number of Socket Pins (Including Earth ) 5 5 5 5 5 6 7 7
Socket Confi guration refer Pg 51 N O P Q R S T U
Cable Cross SectionSolid or Stranded mm2
MinMax
110
110
116
116
425
110
110
110
IP Rating IP66 IP66 IP66 IP66 IP66 IP66 IP66 IP66
56SO416
94mm
94mm
28mm
30mm
56SO416KRO 56SO420RW 56SO716RW
resistant orange and white as standard. Specify GY, RO or RW.Note: All products are sold less enclosure (LE) as standard.
* Special keyway for high cycle applications
500V Socket Outlets IP66
NOTES:
For pin confi gurations refer to
inside back cover 56 SeriesTM
Product Master Page 51
14-2 115919 SCHELE 56 Series Cat19 1914-2 115919 SCHELE 56 Series Cat19 19 25/10/2006 11:44:16 AM25/10/2006 11:44:16 AM
20
DimensionalDrawings
94mm
94mm
66mm
30mm
56SO432 CEE
CEE17 Socket OutletsWhere socket outlets to the European CEE17 standard are required, the 56 Series CEE sockets are available and suit standard 56 Series enclosures. Where a 56 Series CEE socket requires a 56 Series switch,
they should be fi tted to a horizontally mounted 56E2 enclosure. They are available in grey (GY) only.Note: All products are sold less enclosure (LE) as standard.
* 56SO432C CEE specifi cally for international container equipment.
56SO432 CEE 56SO432C CEE
Cat No 56SO316 CEE 56SO332 CEE 56SO416 CEE 56SO432 CEE 56SO432C CEE* 56SO516 CEE 56SO532 CEE
Rated OperationalVoltage Ue (~50Hz) Volts 230 230 400 400 400 400 400
Rated Thermal Current Enclosed Amps 16 32 16 32 32 16 32
Number of Socket Pins (Including Earth ) 3 3 4 4 4 5 5
Socket Confi guration refer Pg 51 W X Y Z Aa Bb Cc
Earth Pin Position 6H 6H 6H 6H 3H 6H 6H
Frequency Colour Blue Blue Red Red Red Red Red
Cable Cross Section
Solid or Stranded mm2Min
Max
1.5
4
2.5
10
1.5
4
2.5
10
2.5
10
1.4
4
2.5
10
IP Rating IP57 IP57 IP57 IP57 IP57 IP57 IP57
Matching Plug BALS21238 BALS21240 BALS21349 BALS21351 BALS21485 BALS21239 BALS21241
CEE17 Socket Outlets IP57
14-2 115919 SCHELE 56 Series Cat20 2014-2 115919 SCHELE 56 Series Cat20 20 25/10/2006 11:44:22 AM25/10/2006 11:44:22 AM
21
DimensionalDrawings
250V Combination Switched Sockets
Cat No 56CV310 56CV313 56CV315
Rated Operational Voltage Ue (~50Hz) Volts 250 250 250
Rated Thermal Current Enclosed Amps 10 13 15
Description Switched NZ/Aust. Socket
Switched British Square Pin Socket
Switched NZ/Aust. Socket
SWITCHDescription 1 way
Single Pole1 way Single Pole
1 way Double Pole
Switch Rating @ AS/NZS3133 0.4 pf inductive
250V M Rating
10AX
M50
16AX
M50
16AX
M120
Switch Rating @ IEC60947-3 AC23A 240V kW
Amps
2.2
15
2.2
15
2.2
15
Cable Cross Section
Solid or Stranded mm2
Min
Max
0.75
6
0.75
6
1.0
16
SOCKETNumber of Socket Pins Including (Earth ) 3 (Flat) 3 (Square) 3 (Flat)
Socket Confi guration - Refer Pg 51 A C D
Cable Cross Section
Solid or Stranded mm2Min
Max
1.0
10
1.0
10
1.0
10
IP Rating IP66 IP66 IP66
The 56 SeriesTM includes an extensive range of one piece combination Switched Sockets. For keylocking and neon products, please use 56 Series switches.They are available in high impact grey, and chemically resistant orange and white as standard. Specify GY, RO or RW. Note: All products are sold less enclosure (LE) as standard.
56CV310RW
56CV310
NOTES:
For pin confi gurations refer to
inside back cover 56 SeriesTM
Product Master Page 51
AC23A Switch of motor loads or
other highly inductive loads.
More info: Pages 4 and 45
Combination Switched Sockets IP66
95mm
190mm
28mm
25mm
FEATURES: One piece products, clean lines,
minimises dirt traps Self-locking clear socket fl ap Long-life synthetic gaskets IP66 weather protection rating Dual padlocking points
56CV315GY56CV313RO
14-2 115919 SCHELE 56 Series Cat21 2114-2 115919 SCHELE 56 Series Cat21 21 25/10/2006 11:44:37 AM25/10/2006 11:44:37 AM
22
DimensionalDrawings
Cat No 56CV316/240 56CV320 56CV332
Rated Operational Voltage Ue (~50Hz) Volts 240 250 250
Rated Thermal Current Enclosed Amps 16 20 32
Description Switched CEE17-4h Socket (Blue)
Switched AS3123 Socket
Switched AS3123 Socket
SWITCH Description 1 way
Double Pole1 way Double Pole
1 way Double Pole
Switch Rating @ AS/NZS31330.4 pf inductive
250V M Rating
16AX
M120
20AX
M150
32AX
M150
Switch Rating @ IEC60947-3 AC23A 240V
AC3 240V
kW
Amps
kW
Amps
2.2
15
5.5
11
3.0
21
7.5
15
4.0
28
11
21
Cable Cross Section
Solid or Stranded mm2 MinMax
1.0
16
1.0
16
1.0
16
SOCKET Number of Socket Pins Including (Earth ) 3 (Round) 3 (Round) 3 (Round)
Socket Confi guration - Refer Pg 51 W F G
Cable Cross Section
Solid or stranded mm2Min
Max
1.0
6
1.0
10
1.0
16
IP Rating IP66 without plug; IP44 with plug
IP66 IP66
56CV316/240GY 56CV332RO
FEATURES: One piece products, clean lines,
minimises dirt traps Self-locking clear socket fl ap Long-life synthetic gaskets IP66 weather protection rating Dual padlocking points
NOTES:
For pin confi gurations refer to
inside back cover 56 SeriesTM
Product Master Page 51
Combination Switched Sockets IP66
56CV310
250V Combination Switched Sockets
95mm
190mm
28mm
25mm
14-2 115919 SCHELE 56 Series Cat22 2214-2 115919 SCHELE 56 Series Cat22 22 25/10/2006 11:44:44 AM25/10/2006 11:44:44 AM
23
DimensionalDrawings
NOTES:
AC23A Switch of motor loads or other
highly inductive loads.
AC3 Squirrel-cage motors: switch
off motors during running most
typical industrial applications
More info: Pages 4 and 45
All 500V Switched Sockets rated 32A and above have an internal interlocking feature (plugs cannot be withdrawn or inserted when the switch is in the ON position) with this feature available on 16A and 20A units on request. The 56CV 3,4 and 5 pin units of 16A and 20A rating (except CEE17 style) have a one piece, internally wired base. This results in faster and tidier installation from having more space and less terminals to check. For keylocking and neon products please use 56 Series switches.Available in high impact grey and chemically resistant orange and white. Specify GY, RO or RW.
Note: All products are sold less enclosure (LE) as standard.FEATURES: One piece products, clean lines, minimises
dirt traps Self-locking clear socket fl ap Long-life synthetic gaskets Safety interlock feature (32A + above) 16A and 20A with one piece, internally
wired, switch and socket base IP66 weather protection rating Dual padlocking points
94mm
190mm
30mm
28mm
56CV532
56CV432ROInterlock feature (seen from rear)
500V Combination Switched Sockets
Combination Switched Sockets IP66
Cat No 56CV416 56CV416K 56CV420 56CV432 56CV440 56CV450
Rated Operational Voltage Ue (~50Hz) Volts 500 500 500 500 500 500
Rated Thermal Current Enclosed Amps 16 16 20 32 40 50
SWITCHDescription 3 Pole 3 Pole 3 Pole 3 Pole 3 Pole 3 Pole
Switch Rating @ AS/NZS31330.4 pf inductive
250V M Rating
16AX
M120
16AX
M120
20AX
M150
32AX
M180
50AX
M250
50AX
M250
Switch Rating @ IEC60947-3 AC23A 415V
AC3 415V
kW
Amps
kW
Amps
7.5
15
5.5
11
7.5
15
5.5
11
11.0
21
7.5
15
15.0
28
11
21
18.5
35
15
28
18.5
35
15
28
Cable Cross Sections
Solid or Stranded mm2Min
Max
1
16
1
16
1
16
1
16
6
35
6
35
SOCKET Number of Socket Pins (Including Earth ) 4 4 4 4 4 4
Socket Confi guration - Refer Pg 51 H I J K L M
Cable Cross Section
Solid or stranded mm2Min
Max
1.0
10
1.0
10
1.0
10
1.0
16
1.0
16
6.0
25
IP Rating IP66 IP66 IP66 IP66 IP66 IP66
14-2 115919 SCHELE 56 Series Cat23 2314-2 115919 SCHELE 56 Series Cat23 23 25/10/2006 11:44:53 AM25/10/2006 11:44:53 AM
24
Cat No 56CV516 56CV520 56CV532 56CV540 56CV550 56CV616 56CV716 56CV720
Rated Operational Voltage Ue (~50Hz) Volts 500 500 500 500 500 500 500 500
Rated Thermal Current Enclosed Amps 16 20 32 40 50 16 16 20
SWITCH Description 3 Pole 3 Pole 3 Pole 3 Pole 3 Pole 3 Pole 3 Pole 3 Pole
Switch Rating @ AS/NZS3133 0.4 pf inductive
500V M Rating
16AX
M120
20AX
M150
32AX
M180
50AX
M250
50AX
M250
16AX
M120
16AX
M120
20AX
M150
Switch Rating @ IEC60947-3
AC23A 415V
AC3 415V
kW
Amps
kW
Amps
7.5
15
5.5
11
11.0
21
7.5
15
15.0
28
11
21
18.5
35
15
28
18.5
35
15
28
7.5
15
5.5
11
7.5
15
5.5
11
11.0
21
7.5
15
Cable Cross Sections
Solid or Stranded mm2Min
Max
1
16
1
16
1
16
6
35
6
35
1
16
1
16
1
16
SOCKET Number of Socket Pins (Including Earth ) 5 5 5 5 5 6 7 7
Socket Confi guration refer Pg 51 N O P Q R S T U
Cable Cross Section
Solid or stranded mm2Min
Max
1.0
10
1.0
10
1.0
16
1.0
16
6.0
25
1.0
10
1.0
10
1.0
10
IP Rating IP66 IP66 IP66 IP66 IP66 IP66 IP66 IP66
WiringDiagrams
Combination Switched Sockets IP66
NOTES:
AC23A Switch of motor loads or other
highly inductive loads.
AC3 Squirrel-cage motors: switch
off motors during running most
typical industrial applications
More info: Pages 4 and 45
14-2 115919 SCHELE 56 Series Cat24 2414-2 115919 SCHELE 56 Series Cat24 24 25/10/2006 11:44:58 AM25/10/2006 11:44:58 AM
25
DimensionalDrawings
56 Series RCD protected socket outlets protect the user against an earth fault. They feature double pole switching and respond to earth fault in pulsating DC applications. 56 Series RCDs are available with both latching and non-latching RCD modules. To order a non-latching product specify A in the description (ie. 56ARCD20 or 56C310ARCD). To order a latching product refer to the descriptions below.Available in high impact grey and chemically resistant orange and white. Specify GY, RO or RW.
Note: All products are sold less enclosure (LE) as standard.Not available in 10mA.FEATURES: 30mA rated tripping current for personal
protection IP66 weather protection rating Self-locking cover fl ap Double pole switching Power consumption 16W at 240V
56C310RCD-30
56RCD20-30RO 56C310RCD-30RO 56C320RCD-30RO
Cat No 56RCD20-30 56C310RCD-30 56C316RCD-30 56C320RCD-30
Rated Operational Voltage Ue (~50Hz) Volts 240 240 240 240
Rated Thermal Current Enclosed Amps 20 10 16 20
Description RCD Module only
RCD Protected 10A Socket
RCD Protected CEE17 Socket (Blue)
RCD Protected 20A Socket
RCD MODULE Rated Tripping Current
Rated Tripping Time30mA 30mS
30mA
30mS
30mA
30mS
30mA
30mS
SOCKET Number of Socket Pins (Including Earth ) 3 3 3
Socket Confi guration refer Pg 51 A W F
Cable Cross Section
Solid or Stranded mm2Min
Max
1.0
10
1.0
6
1.0
6
1.0
10
IP Rating IP66 IP66 IP66 IP66
NOTES:
For pin confi gurations refer to
inside back cover 56 SeriesTM
Product Master Page 51
RCD Protected Outlets IP66
REDON
BLACKOFF
56 RCD
RESET
TESTTEST BEFORE USE.
DO NOT USEIF TEST FAILS
95mm
190mm
230/240V a.c.30mA I n
Residual Current Device
10ASINGLE PHASE50Hz IP 66
CAT No. 56 C 310RCD-30
28mm
30mm
14-2 115919 SCHELE 56 Series Cat25 2514-2 115919 SCHELE 56 Series Cat25 25 25/10/2006 11:45:00 AM25/10/2006 11:45:00 AM
26
DimensionalDrawings
RCD Protected Outlets IP66
Cat No 56C310EL2P 56SO4ELP15
Rated Operational Voltage Ue (~50Hz) Volts 240 240
Rated Thermal Current Enclosed Amps 10 15
Description RCD and Overload Protected Socket 10A Plug
RCD Protected 10A Socket 15A Plug
RCD MODULE Rated Tripping Current
Rated Tripping Time
30mA
100mS
30mA
100mS
SOCKET Number of Socket Pins (Including Earth ) 3 3
Socket Confi guration refer Pg 51 A A
Cable Cross Section
Solid or Stranded mm2Min
Max
n/a n/a
IP Rating IP66 IP66
Portable Protected Socket OutletsTwo new products for the building and trade industry. Rugged construction using 56 Series and Merlin Gerin technology. Features an easy to carry handle and hanging facility, 2m heavy duty fl exible card set, RCD and overload protection, IP66 rated, and complies with AS/NZS3012 for construction and demolition sites. They are available in chemically resistant orange as standard for the electrical industry.
56S04ELP15
56C310EL2PRO
NEW
235mm
90mm
296mm
14-2 115919 SCHELE 56 Series Cat26 2614-2 115919 SCHELE 56 Series Cat26 26 25/10/2006 11:45:05 AM25/10/2006 11:45:05 AM
27
DimensionalDrawings
Cat No 56AI310 56AI315 56AI320 56AI332 56AI416 56AI420 56AI432
Rated Operational Voltage Ue (~50Hz) Volts 250 250 250 250 500 500 500
Max. Thermal Current Enclosed Amps 10 15 20 32 16 20 32
Number of Pins (Including Earth ) 3 3 3 3 4 4 4
Pin Confi guration refer Pg 51 A D f g h j k
Terminal Capacity mm2 Min
Max
1
6
1
6
1
6
2.5
16
1
6
1
6
2.5
16
IP Rating IP66 * IP66** IP66 IP66 IP66 IP66 IP66
PDLs Appliance Inlets can be used with any appropriately rated cord connector maintaining the IP66 rating. Appliance Inlets are to be mounted vertically into a standard 2 gang or larger enclosure. Note: 56AI310 and 56A1315 fi t on a standard 56E1 enclosure. A captive clear cover is provided for sealing out water and dust to maintain the IP66 rating
when not in use. These are available as a spare: Cat 56PC.Available grey (GY) only, except 56AI310 and 56AI315 available in chemically resistant orange (RO) and white (RW). Note: All products are sold less enclosure (LE) as standard.
Cat No 56AI440 56AI450 56AI516 56AI520 56AI532 56AI540 56AI550
Rated Operational Voltage Ue (~50Hz) Volts 500 500 500 500 500 500 500
Max. Thermal Current Enclosed Amps 40 50 16 20 32 40 50
Number of Pins (Including Earth ) 4 4 5 5 5 5 5
Pin Confi guration refer Pg 51 l^ m n o p q r
Terminal Capacity mm2 Min
Max
2.5
16
4
16
1
6
1
6
2.5
16
2.5
16
4
16
IP Rating IP66 IP66 IP66 IP66 IP66 IP66 IP66
* when used with 56CSC310 only** when used with 56CSC315 only
56AI320 to 56AI550
56AI310 and 56AI315
192mm
95mm
78mm
28mm
70mm
94mm
94mm
28mm
25mm
56AI310GY 56AI532GY
Appliance Inlets IP66
NOTES:
For pin confi gurations refer to inside back cover 56 SeriesTM Product Master Page 51
14-2 115919 SCHELE 56 Series Cat27 2714-2 115919 SCHELE 56 Series Cat27 27 25/10/2006 11:45:15 AM25/10/2006 11:45:15 AM
28
DimensionalDrawings
250V PlugsThe 56 Series Single Phase plugs are available in 10A, 15A, 20A and 32A pin confi gurations to suit the Australian and New Zealand markets and in the British 13A square pin confi guration. All nine plugs are IP66 rated when in use with 56 Series IP66 sockets, combination switched sockets, and RCDs.The popular small frame sized plugs were fully redesigned and re-launched in 2003 to meet todays market requirements. They are designed with the food industry in mind, removing signifi cant dirt gathering areas, and with a better lock-ring for easier use.
As well as this they are designed for the installer, incorporating an improved cable entry, a hinged single screw cord clamp, and an improved terminal layout.FEATURES: Transparent body IP66 rated M20 rear thread on small frame size plugs,
allowing fl exibility in cable connection All plugs feature the certainty of a cord
clamp and convenience of rear cable entry for terminals
Cat No (Straight)Cat No (Angled)
56P310 56P310R 56P315 56P313 56P320F 56P32056PA320
56P33256PA332
Rated Operational VoltageUe (~50Hz) Volts 250 250 250 250 250 250 250
Max. Thermal Current Enclosed Amps 10 10 15 13 20 20 32
Number of Pins (Including Earth ) 3 (Flat)
2 (Flat) & 1 (Round) 3 (Flat) 3 (Square) 3 (Flat) 3 (Round) 3 (Round)
Pin Confi guration refer Pg 51 A B D C E f g
Cable Entry Diameter mm Min
Max
7
11
7
11
7
11
6
10
7
11
7
16
10
27
Terminal Capacity mm2 Min
Max
0.75
1.5
0.75
1.5
1.0
1.5
0.75
1.5
1.0
1.5
1
6
2.5
16
Plugs are available in orange/clear as standard and chemically resistant orange and can be ordered by adding V to the catalogue number. Eg: 56PAV320. These plugs are fully orange without clear bodies.
56P310
12mm 31mm67mm 42mm
20mm 28.5mm
112.5mm
85mm20mm20mm
78mm 55mm
56P313
56P310 56PA320 56PA332
Plugs IP66
NOTES:
For pin confi gurations refer to
inside back cover 56 SeriesTM
Product Master Page 51
14-2 115919 SCHELE 56 Series Cat28 2814-2 115919 SCHELE 56 Series Cat28 28 25/10/2006 11:45:25 AM25/10/2006 11:45:25 AM
29
DimensionalDrawings
500V PlugsThese plugs are all rated IP66 when fi tted to a 56 Series cord connector or Socket Outlet. The body section is transparent for quick and easy inspection of the terminals and cable entry. Plugs are available with 4 to 7 pins, 16A to 50A to cover most applications.
Cat No (Straight)Cat No (Angled)
56P41656PA416
56P416K**56PA416K
56P42056PA420
56P43256PA432
56P432RF*56PA432RF*
56P44056PA440
56P45056PA450
56P51656PA516
Rated Operational Voltage Ue (~50Hz) Volts 500 500 500 500 500 500 500 500
Rated Thermal Current Enclosed Amps 16 16 20 32 32 40 50 16
Number of Pins (Including Earth ) 4 4 4 4 4 4 4 5
Pin Confi guration refer Pg 51 h i j k k l^ m n
Cable Entry Diameter mm Min
Max
7
16
7
16
7
16
10
27
10
27
10
27
10
27
7
16
Terminal Capacity mm2 Min
Max
1
6
1
6
1
6
2.5
16
2.5
16
2.5
16
4
16
1
6
* RF Reefer Version with narrow locking ring for refrigerated container applications** Special keyway for high cycle applications
56PV432 56P432RF 56PA416
56P320 to 56P720 (16A ~ 20A)
56PA320 to 56PA720 (16A ~ 20A)
56P432 to 56P550 (32A ~ 50A)
56PA432 to 56PA550 (32A ~ 50A)
Plugs are available in orange/clear standard and chemically resistant orange and can be ordered by adding V to the catalogue number. Eg: 56PAV320. These plugs are fully orange without clear bodies.
Plugs IP66
52mm
19mm152mm
78mm 48mm62mm
19mm
52mm78mm
48mm149mm
108mm
20mm
78m
m59
mm
164mm 58mm
123mm
59mm
20mm
78mm
176mm
58mm 68mm
14-2 115919 SCHELE 56 Series Cat29 2914-2 115919 SCHELE 56 Series Cat29 29 25/10/2006 11:45:35 AM25/10/2006 11:45:35 AM
30
DimensionalDrawings
Cat No (Straight)Cat No (Angled)
56P52056PA520
56P53256PA532
56P54056PA540
56P55056PA550
56P61656PA616
56P71656PA716
56P72056PA720
Rated Operational Voltage Ue (~50Hz) Volts 500 500 500 500 500 500 500
Rated Thermal Current Enclosed Amps 20 32 40 50 16 16 20
Number of Pins (Including Earth ) 5 5 5 5 6 7 7
Pin Confi guration refer Pg 51 o p q r s t u
Cable Entry Diameter Min
Max
7
16
10
27
10
27
10
27
7
16
7
16
7
16
Terminal Capacity mm2 Min
Max
1
6
2.5
16
2.5
16
4
16
1
6
1
6
1
6
Auxiliary Pins C1C2 Maximum Current 10A 10A 10A
56P416 to 56P720 (16A~20A)
52mm
19mm152mm
78mm 48mm62mm
19mm
52mm78mm
48mm149mm
108mm
56PA416 to 56PA720 (16A~20A)
59mm78mm
164mm
56P432 to 56P550 (32A~50A)
20mm
78m
m59
mm
164mm 58mm
123mm
56PA432 to 56PA550 (32A~50A)
Switched Pendant OutletA 56 Series Switched Pendant Outlet that combines safety, performance, and functionality. An IP66 rated outlet that allows the ability to disconnect the supply without unplugging and from a prominent location.FEATURES: A positive activating slide switch Double pole switching Built-in hanging facility New easy-use connector fl ap Ample wiring room Optional neon indicationAvailable in chemically resistant orange only. Specify RO.
Cat No 56SP0310 56SP0315
Rated Operational Voltage Ue (~50Hz) Volts 250 250
Max. Current Enclosed Amps 10 15
Number of Pins (Including Earth ) 3 3
Socket Confi guration refer Pg 51 A D
Switch Description 1 way
Double Pole
1 way
Double Pole
Cable Entry Diameter Min
Max
7
11
7
11
Terminal Capacity mm2 Min
Max
0.75
2.5
0.75
2.5
IP Rating IP66 IP66
Plugs and Switched Pendant Outlet IP66
NOTES:
For pin confi gurations refer to
inside back cover 56 SeriesTM
Product Master Page 51
Available early 2007
NEW
56SPO310RO
New switched pendant outlets
Chemically resistant orange
14-2 115919 SCHELE 56 Series Cat30 3014-2 115919 SCHELE 56 Series Cat30 30 25/10/2006 11:45:48 AM25/10/2006 11:45:48 AM
31
DimensionalDrawings
Cord ConnectorsPDLs Cord Connectors can be used with any 56 Series Plug or Appliance Inlet maintaining the IP66 protection. The body section and fl ap are both transparent for quick and easy identifi cation of the socket confi guration and the cable termination.
Available in orange/clear as standard, and also can be ordered by adding a V to the stock code (i.e. 56CRV310), or RO for the CSCs (i.e. 56CSC310RO). These connectors are fully orange.
Cat No 56CSC310 56CR310 56CSC315 56CR315 56CR320 56CR332 56CR416 56CR420
Rated Operational Voltage Ue (~50Hz) Volts 250 250 250 250 250 250 500 500
Maximum Current Enclosed Amps 10 10 15 15 20 32 16 20
Number of Socket Pins (Including Earth ) 3 3 3 3 3 3 4 4
Socket Confi guration refer Pg 51 A A D D F G H J
Cable Entry Diameter mm Min
Max
7
11
6
9
7
11
7
11
7
16
10
27
7
16
7
16
Terminal Capacity mm2 Min
Max
1
1.5
0.75
1.5
0.75
1.5
0.75
1.5
1
6
2.5
16
1
6
1
6
IP Rating IP66* IP66 IP66** IP66 IP66 IP66 IP66 IP66
Cat No 56CR432 56CR440 56CR450 56CR516 56CR520 56CR532 56CR540 56CR550
Rated Operational Voltage Ue (~50Hz) Volts 500 500 500 500 500 500 500 500
Maximum Current Enclosed Amps 32 40 50 16 20 32 40 50
Number of Socket Pins (Including Earth ) 4 4 4 5 5 5 5 5
Socket Confi guration refer Pg 51 K L M N O P Q R
Cable Entry Diameter mm Min
Max
10
27
10
27
10
27
7
16
7
16
10
27
10
27
10
27
Terminal Capacity mm2 Min
Max
2.5
16
2.5
16
4
16
1
6
1
6
2.5
16
2.5
16
4
16
IP Rating IP66 IP66 IP66 IP66 IP66 IP66 IP66 IP66
* when used with 56AI310 ** when used with 56AI315
56CR420 56CR432
56CR310 to 56CR315
85mm
120mm
55.2mm 12.1mm 31mm
55.2mm
105.1mm
65mm12.1mm 31mm
56CSC310 to 56CSC315
96mm
155mm140mm
69mm21mm
77mm
56CR 16A to 20A
96mm
186mm120mm
69mm58mm
77mm
56CR 32A to 50A
Cord Connectors IP66
56CSC310
14-2 115919 SCHELE 56 Series Cat31 3114-2 115919 SCHELE 56 Series Cat31 31 25/10/2006 11:46:04 AM25/10/2006 11:46:04 AM
32
DimensionalDrawings
DIN Rail Mounting Covers for MCBs, RCDs or any full DIN mounting accessory.
56CB4Two gang cover that fi ts up to 4 poles (72mm) in width. Provided with 1x8mm DIN opening and 6x9mm breakouts. Supplied with full DIN rail and mounting bracket for fi tting to a standard 56E2 or larger enclosure.DIN rail and brackets (2) kit is available as a spare. To order, specify: 1CB100.FEATURES: IP66 rated Dual 415V/240V neon Clear pad lockable fl ap coverAvailable: Grey, orange, white.Note: Supplied less enclosure (LE) as standard.
56CB13Thirteen way fully equipped distribution board. Fitted complete with DIN rail, 1 x Earth and 2 x Neutral bars as standard, all fi tted with links (where applicable) to a base enclosure the same size as a 56E6.FEATURES: IP66 rated Complies with AS/NZS3439.3 Clear pad lockable fl ap cover Supplied with accessory packAvailable: Grey only. Orange and white on request.
Cat No 56CB4
Number of Poles 4
Module Width mm 72 (4x18)
Neon Voltage (~50Hz) Volts 415V/240V
DIN RailMounting Height
MinMax
48mm62mm
IP Rating IP66
56CB4GY with MG 23358 RCCB 56CB13
Cat No 56CB13
Number of Poles 13
Module Width mm 234 (13x18)
Rated Operational Voltage (~50Hz)
Volts 415V a.c.
Rated Current of Board 100A with suitable rated cable (25mm)
Rated Insulation Voltage 1000V a.c.
Short Circuit Withstand Strength
10kA
Dimensions (with enclosure)
295Wx123Dx198H
Cable Entries 6x25mm, 2x32mm
IP Rating IP66
DIN Mounting MCB/RCD Covers IP66
56CB4
198mm
95mm
56CB13
198mm
295mm
123mm
28mm
14-2 115919 SCHELE 56 Series Cat32 3214-2 115919 SCHELE 56 Series Cat32 32 25/10/2006 11:46:13 AM25/10/2006 11:46:13 AM
33
DimensionalDrawings
Module Mounting Lids
Suspension hooks that can be fi tted to 56 Series Connectors, enabling a chain or cord to be attached for ceiling mounting.
Cat No 56POK 56POK1
Suits Suits
10A to 20A 32A to 50A
Connectors Connectors
56POK and 56POK1
500 Series IP66 CoversCovers to suit any PDL 500 or 600 Series module providing IP66 protection. Ideally suited for 500 and 600 Series switches, push buttons, dimmers and neon indicators.
22mm DiameterLids for mounting either one or two 22mm diameter control modules. Lids can be supplied in grey, orange, white or clear for matching to any control accessories. Ideally suited for the Telemecanique Harmony range of pushbuttons refer to advertisement below.
Cat No 56L1/22/1 56L1/22/2
Mounting Hole Size 22.5mm with 3.5mm Keyway
Mounting Holes 1 2
Mounting Centres 40mm
Colours Available Grey, Orange, White or Clear
56L1/22/156L1/22/2
56MO500/156MO500/2
95mm
95mm
22.5mm
40mm
94mm
94mm
30mm28mm
Pendant Outlet Kits
Cat No 56MO500/1 56MO500/2
Mounting Hole Size For PDL 500 and 600 Series Module Only
Mounting Holes 1 2
Mounting Centres 30mm
Push ButtonsPilot LightsSelector SwitchesJoysticksBeaconsControl StationsPendants
Control & Signalling from Telemecanique Harmony that meets all your application needs
14-2 115919 SCHELE 56 Series Cat33 3314-2 115919 SCHELE 56 Series Cat33 33 25/10/2006 11:46:23 AM25/10/2006 11:46:23 AM
34
PDL 56 Series enclosures are in two types: shallow, in single and 2 gang sizes, suitable for mounting blank lids, single phase switches, single phase sockets and sunset switches; and standard 63mm deep enclosures, which range in size from single gang to 16 gang. They are moulded in impact resistant PVC.
All multigang enclosures are supplied complete with a selection of bridges to provide a sealing base between individual modules and dividers for separating incompatible circuits. Enclosures are supplied with a range of conduit entries according to the chart.
Cat No 56E1S 56E1 56E1/25/25 56E2S 56E2 56E2 Food Industry
56E2/25/25 56E2/40
Module Size 1 Shallow 1 1 2 Shallow 2 2 2 2
Module Confi guration 1x1 1x1 1x1 2x1 2x1 2x1 2x1 2x1
Dimensions
Length
Width
Depth
102
102
38
102
102
63
102
102
63
198
102
38
198
102
63
198
102
63
198
102
63
198
102
63
Conduit Entries
Metric mm* 25
32
40
2
1
1
2
1
2
1
1
2
2
1
2
Conduit Reducers
Supplied 25/20
32/25
1
1
1
2
1
1
1
2
2
1
Rear Entry
Cut-Outs
1x25-20 1x32-25 1x32-25 2x25-20 1x32
1x25
1x32
1x25
1x25-20
1x32-25
1x25-20
1x32-25
56E1/25/25RW 56E8GY including dividers
* Special enclosure threaded entries are available on request.Specify grey (GY), orange (RO), or white (RW).
102mm
198mm
40mm63mm
23mm
20mm
102mm
102mm
63mm
20mm
23mm
102mm
102mm
35mm
20mm
102mm
198mm
63mm
23mm
20mm
102mm
197mm
20mm
38mm
63mm
20mm
23mm102mm
102mm
40mm
56E2S
56E2/25/25
56E2
56E1S
56E1
DimensionalDrawings
Enclosures
56E1/25/25
14-2 115919 SCHELE 56 Series Cat34 3414-2 115919 SCHELE 56 Series Cat34 34 25/10/2006 11:46:30 AM25/10/2006 11:46:30 AM
35
* Special enclosure threaded entries are available on request.
Cat No 56E3 56E4VH 56E4 56E6 56E8 56E9 56ED2/40 56E16
Module Size 3 4 4 6 8 9 2 Extra Deep 16
Module Confi guration 3x1 4x1 2x2 3x2 4x2 3x3 2x1 4x4
Dimensions mm
Length
Width
Depth
296
102
63
396
102
63
198
198
63
296
198
63
396
198
63
296
296
63
198
101
100
396
396
63
Conduit Entries Metric mm* 25
32
40
1
1
---
1
1
---
2
4
---
2
2
---
2
2
---
3
3
---
---
---
2
4
4
Conduit Reducers Supplied 25/20
32/25
1
1
---
---
1
1
1
1
---
---
1
1
---
---
4
4
Rear Entry Cut-Outs
3x32-25
1x32
1x40
2x25
1x32
1x40
2x32-25
2x32
2x40
2x25
2x32
2x40
4x25
2x32
2x40
4x25
3x32
2x40
1x25
1x32
8x25
4x32
4x40
56E3
56E4VH
56E6
56E8
56E9
396mm
396mm
96.5mm96.5mm96.5mm23mm
20mm
64mm
198mm
198mm
20mm
23mm
64mm96.5mm
96.5mm
295mm
20mm
22mm
64mm 198mm96.5mm
391mm
23mm
198mm96.5mm
20mm
63mm
295mm
295mm
96.5mm96.5mm20mm
23mm
64mm
102mm
295mm
63mm
23mm
20mm
102mm
391mm
63mm
20mm
23mm
56E16
DimensionalDrawings
Enclosures
56E4
14-2 115919 SCHELE 56 Series Cat35 3514-2 115919 SCHELE 56 Series Cat35 35 25/10/2006 11:46:38 AM25/10/2006 11:46:38 AM
36
Cat No 56L1 56L2 56L3 56L4 56XDL1 56DL2 56DL4 56DL6
Module Size 1 2 3 4 1 2 4 6
Module Confi guration 1x1 2x1 3x1 2x2 1x1 2x1 2x2 3x2
Dimensions
Length
Width
Depth
95
95
28
191
95
28
289
95
30
191
191
28
95
95
100
191
95
63
191
191
63
289
191
63
56 Series Lids are available in 1 gang to 6 gang module sizes in both grey and clear, impact resistant polycarbonate or chemically resistant orange and white. Lids can be used in conjunction with enclosures or other product in the series to produce a wide range of power distribution centres or utility boxes.
56L2
56DL2
56L1
56L3
56DL6
56XDL1
56L4
56L2RO fi tted to 56E2RO 56DL4CL fi tted to 56E4GY
95mm
95mm
28mm
28mm
192mm
95mm
96mm
289mm
30mm
95mm
95mm 78mm
100mm
63mm
192mm
95mm
191mm
191mm 28mm
287mm
190mm 77mm
NOTE: All products come supplied less enclosure. Options are available fi tted with enclosure: 56 Series utility boxes in grey and clear, shallow and standard, with some fi tted with gear trays. Refer to the latest PDL pocket book for details.
Available in high impact grey and clear, or chemically resistant orange and white. Except 56XDL1 is only available in grey and clear. Specify GY, CL, RO or RW, i.e. 56L1GY.
DimensionalDrawings
Lids
14-2 115919 SCHELE 56 Series Cat36 3614-2 115919 SCHELE 56 Series Cat36 36 25/10/2006 11:46:45 AM25/10/2006 11:46:45 AM
37
PDL 56FA SeriesMounting Details
Supplied with metal wall mounting plate and foam sealing gasket. Ideal for fl ush mounting of 1 to 4 gang accessories maintaining the IP66 protection. Moulded in impact resistant UV stabilised PVC.Available in grey (GY), orange (RO), and white (RW).
Cat No 56FA1 56FA2 56FA3 56FA4
Module Size 1 2 3 4
Module Confi guration 1x1 2x1 3x1 2x2
Dimensions
Length
Width
157
157
254
157
350
157
254
254
OFF ON10 20A 500VTHREE PHASE
50Hz IP66CAT No 56 SW 320
56 FA256 FA1
Dimensional Drawings
Cat No 56PE2/25 56PE2/32
Conduit Entries 1x25mm 1x32mm
Conduit Reducers Supplied 1x25/20mm -
Module Size 1x2 1x2
PDLs Pendant Enclosure allows you to mount two 56 SeriesTM single gang products in a fully enclosed, portable unit so you can hang up your power supply.A divider separates the two mounted products and produces a seal to ensure the IP66 rating.In the interests of user convenience, the enclosure features fi nger recesses for holding while unplugging the plug from the socket.They have a strong, large loop for attaching a chain, as well as angled cable entry for ease of wiring.
56FA1GY 56FA2GY
56PE2
Available in high-impact grey and chemically resistant orange and white.
11.5mm
84mm
157mm
84mm
84mm157mm
11.5mm
84mm
180.5mm
84mm84mm
84mm
253.5mm
157mm
MountingFlange
Foam Sealing Gasket
MountingPlate
WallCavity
The 56 Series Pendant Enclosure
Flush Surrounds
Pendant Enclosures
DimensionalDrawings
90mm
30
25mm or 32mmthreaded entry
102mm
102mm18mm
180mm
18mm
25mm or 32mm threaded entry
14-2 115919 SCHELE 56 Series Cat37 3714-2 115919 SCHELE 56 Series Cat37 37 25/10/2006 11:47:01 AM25/10/2006 11:47:01 AM
38
Mounting for 56 Series enclosures enabling the boxes to be recessed out from the wall or mounting area. An advantage for high quality hygiene areas.RED/YELLOW/BLUE to fi t all covers available in single colour packs of 20 or a mixed pack of 60.To order, specify NO9 and the colour, for example: NO9 BLUE. Also available in grey, orange and white.
Cat No 56MF
Material 316 Stainless Steel
Stand off height 9.0mm
Mounting Centres 82mm
Package Contents
Mounting Feet
Mounting Screws
2
4
Mounting Feet and Indenticaps
PLUG SLEEVE KITS:
Cat No Description
56P16 16A
56P20/250 20A 3 pin
56P32/250 32A 3 pin
56P20/500 20A 4+ pin
56P32/500 32A 4+ pin
56P40 40A
56P50 50A
Two covers cater for all 56 Series standard socket products to allow safe replacement of damaged covers.
Socket Covers
Cat No 56SOCVR 56SOCVR10
Description Socket Cover
General
Socket Cover 10A,
15A
Gaskets
Cat No Description
56L1GASKET Single Module Gasket
56L2GASKET Double Module Gasket
56HPG1 High Pressure 1 Gang
56HPG2/1 High Pressure 2 Gang, 1 Piece
56HPG2/2 High Pressure 2 Gang, 2 Piece
Replacement gaskets for worn or damaged units, as well as gaskets for improved protection in high pressure wash down situations.
The 56 SeriesTM has a comprehensive range of plug bodies and plug sleeve kits. These allow for the replacement of damaged plug bodies or sleeves through extensive use or misuse.They are available in all plug sizes from 16A up and in both standard impact resistant polycarbonate or chemical resistant orange.Plug bodies also fi t 56 Series cord connectors.
Plug Body and Plug Sleeve Kits
Cat No Description
56P16/20A 16/20A Straight
56PA16/20A 16/20A Angled
56P32/35A 32/35A Straight
56PA32/35A 32/35A Angled
56P40/50A 40/50A Straight
56PA40/50A 40/50A Angled
Accessories
PLUG BODIES:
Enclosures
Cat No Description
56BRIDGE Enclosure Bridge
56DIVIDER Enclosure Divider
3S130 Enclosure Mounting Pillar
Replacement parts to suit 56 SeriesTM enclosures.
Socket Cover
56HPG1
56HPG2/1 56HPG2/2
NEW
Mounting Feet
Plug Sleeve
Plug Body
NO9 Caps
14-2 115919 SCHELE 56 Series Cat38 3814-2 115919 SCHELE 56 Series Cat38 38 25/10/2006 11:47:08 AM25/10/2006 11:47:08 AM
39
For tough motor control situations!A range of rugged, dependable D.O.L. Motor Starters, for single phase motors up to 2.2kW (3.0hp) and three phase motors up to 5.5.kW (7.5hp). For maximum versatility and fl exibility there are four versions in each of the single and three phase options:
1 START/STOP RESET2 STOP/RESET ONLY3 START/STOP RESET
with isolating switch4 STOP/RESET with
isolating switch
56 SeriesTM Compatible
1 Pre-wired
2 Unique cover mounted contactor and overload (allows for fi rst fi tting of enclosure and conduit if required)
3 Both 230V and 400V versions available
4 AC23 11kW motor rated switch
5 Maximum contactor rating 5.5kW (7.5hp)
6 1x25mm conduit entry
7 2x20mm conduit entries
8 Finger proofi ng on all terminals
9 Shrouded push buttons
10 Available with or without enclosure
11 High impact resistant UV stabilised polycarbonate cover
12 Raised stop button
13 Enclosure manufactured from UV stabilised rigid PVC
14 Easy adjustment of overload setting, no tools required
15 Terminal screws combination slot-pozi head
The Watertight Motor Starter Solution with features designed to outperform all others
35
11
9
12
6
13
10
7
1
2
15
8
14
4
Combination Isolating Switch/D.O.L. Motor Starter
NZ Made forNZ Conditions
IP66Protection
PDLs 56 SeriesTM D.O.L. Motor Starters
14-2 115919 SCHELE 56 Series Cat39 3914-2 115919 SCHELE 56 Series Cat39 39 25/10/2006 11:47:11 AM25/10/2006 11:47:11 AM
40
Product Descriptions
56MS230RCoil voltage 230V~50Hz Stop/Reset Control only Less enclosure
56MS230Coil voltage 230V~50Hz Start and Stop/Reset Controls Less enclosure
56MS400RCoil voltage 400V~50Hz Stop/Reset Control only Less enclosure
56MS230ECoil voltage 230V~50Hz Start and Stop/Reset Controls With enclosure
56MS230SWCoil voltage 230V~50Hz Start and Stop/Reset Controls With isolating switch Less enclosure
56MS400Coil voltage 400V~50Hz Start and Stop/Reset Controls Less enclosure
56MS230SWECoil voltage 230V~50Hz Start and Stop/Reset Controls With isolating switch With enclosure
56MS400ECoil voltage 400V~50Hz Start and Stop/Reset Controls With enclosure
56MS400SWCoil voltage 400V~50Hz Start and Stop/Reset Controls With isolating switch Less enclosure
56MS230SWRCoil voltage 230V~50HzStop/Reset Control only With isolating switch Less enclosure
56MS400SWECoil voltage 400V~50Hz Start and Stop/Reset Controls With isolating switch With enclosure
56MS400SWRCoil voltage 400V~50Hz Stop/Reset Control only With isolating switch Less enclosure
56MS230E 56MS230R
56MS400SWE 56MS400SWR
102mm96mm
20mm conduitentry (x2)
25mmconduit entry (x1)
198m
m
192m
m
3mm
40mm
20mm
123mm105mm
63mm17.5mm
116mm
102mm96mm
25mmconduit entry (x1)
40mm
20mm conduitentry (x2)
116mm20mm
105mm63mm
17.5mm
198m
m
192m
m
3mm
* Note: Products supplied less enclosure unless specifi ed in stock code and descriptions above. Available in grey as standard, chemically resistant orange and white on request.
Products in the Motor Starter Range IP66
DimensionalDrawings
14-2 115919 SCHELE 56 Series Cat40 4014-2 115919 SCHELE 56 Series Cat40 40 25/10/2006 11:47:15 AM25/10/2006 11:47:15 AM
41
Typical connection diagrams for motor starter options, full instructions and connection diagrams are supplied with products.
3 Phase 3 Wire Supply 56MS400SW 3 Phase 3 Wire Supply 56MS400
3 Phase 4 Wire Supply 56MS230SW
3 Phase 4 Wire Supply 56MS230
Single Phase & Neutral Supply 56MS230SW
Single Phase & Neutral Supply 56MS230
Remote Controls
L1 L2 L3
1 3 5 132
E
MAINS SUPPLY
1
2 4 6 14C
2 4 6
U V W
98 96
95
ONOFF
START
STOPRESET
MOTOR LOAD
A1
A2
400
L1 L2 L3
1 3 5 132
E
MAINS SUPPLY
1
2 4 6 14C
2 4 6
U V W
98 96
95
ONOFF
START
STOPRESET
MOTOR LOAD
A1
A2
230
Remove link between A1and 1 at terminal 1 oncontactor and connectto neutral.
Connect link wireattached to contactorterminal 3 to switch.
N
MAINS SUPPLYN A
1 3 5 132
E
1
2 4 6 14C
2 4 6
N A
98 96
95
ONOFF
START
STOPRESET
MOTOR LOAD
A1
A2
230
Connect link wire attachedto contactor terminal 3 toterminal 6 on overload.
1 3 5 1321
2 4 6 14C
2 4 6
U V W
98 96
95
START
STOPRESET
MOTOR LOAD
A1
A2400
L1 L2 L3MAINS SUPPLY E
Remove link betweenA1 and 1 at terminal 1on contactor andconnect to neutral.
Remove link wire attachedto contactor terminal 3.
1 3 5 1321
2 4 6 14C
2 4 6
U V W
98 96
95
START
STOPRESET
MOTOR LOAD
A1
A2
230
L1 L2 L3MAINS SUPPLY EN
1 3 5 1321
2 4 6 14C
2 4 6
N A
98 96
95
START
STOPRESET
MOTOR LOAD
A1
A2
230
Connect link wireattached to contactorterminal 3 to terminal6 on overload.
N AEMAINS SUPPLY
REMOTE STOP/START PUSH BUTTONS
REMOTE STOP PUSH BUTTONRemove linkbetween 14and 96 onstarter andconnect asshown.
STOP
14 96
14
96
START STOP
13
Connection Diagrams
Starter and OverloadGENERALDirect on Line Motor StarterMaximum Rated Output AC3 5.5kW 400V Three PhaseAC3 2.2kW 230V Single PhaseMaximum Thermal Current Enclosed: 16AIP66 Dust and Watertight AS 1939:1990
BS 5490:1985IEC 529 :1989
Finger proof terminals on contactor, overload and isolating switch to IP20
CONTACTORType: S12 10 Electromagnetic Contactor 3 pole + N/O AuxiliaryFrequency: 50Hz ACUtilisation Category: AC3 7.5kW 400V Three PhaseAC3 2.2kW 230V Single PhaseRated Insulation Voltage Ui: 690V~Rated Thermal Current Enclosed: 16ACoil Characteristics: Pull in 0.85 - 1.1 Uc (Control Circuit Voltage) Drop Out 0.4 - 0.6 UcTerminal Capacities: Stranded 0.5 - 2.5mm2 Solid 0.75 - 4mm2
ENCLOSURERigid PVC UV stabilised, impact resistant.Screwed Conduit Entries Back Entry Cut-Outs1 x 25mm 1 x 32mm2 x 20mm 1 x 25mm
MOTOR RATED ISOLATING SWITCHUsed with 56MS230SW, 56MS400SW, 56MS230SWR, 56MS400SWR 3 pole isolating. Motor rated toAC23 11kW 415V BS5419M110 20A 500V AS3133
START PUSH BUTTON SWITCHRated Insulation Voltage Ui: 500V ACRated Thermal Current: 16AUtilisation Category: AC11 4A 250V AC11 2A 415V
OVERLOADFull Load Current Rating: 0.40 - 16 Amps in 10 size rangesRated Insulation Voltage Ui: 660V ACSingle Phase ProtectedTemperature Compensated: From 0 - 35CManual or Auto Reset:Manual Test Incorporated:Alarm Control: N/O
Auxiliary ContactsRated Insulating Voltage: 500V ACRated Operational Current le: AC11 2A 500V
Terminal CapacitiesMain: Stranded 0.5 - 2.5mm2 Solid 0.5 - 4mm2 Auxiliary: Stranded 0.5 -2.5mm2 Solid 0.5 - 2.5mm2
TECHNICALINFORMATION
14-2 115919 SCHELE 56 Series Cat41 4114-2 115919 SCHELE 56 Series Cat41 41 25/10/2006 11:47:19 AM25/10/2006 11:47:19 AM
42
Direct on Line Starter, Full Load Current
NOTE: Full Load Currents given in this table are intended as a guide only. For exact full load current, consult the motor manufacturers specifi cations or the motor nameplate.
OverloadsReplacement CoilsCat No Description
56MSC230 230V~50Hz Coil
56MSC400 400V~50Hz Coil
56MSC24 24V~50Hz Coil
Cat No Description
56T9062 0.4-0.62A
56T9092 0.6-0.92A
56T913 0.85-1.3A
56T919 1.2-1.9A
56T928 1.8-2.8A
56T942 2.7-4.2A
56T962 4.0-6.2A
56T992 6.0-9.2A
56T9120 8.0-12.0A
56T9160 11.0-16.0A
SHORT CIRCUIT CAPABILITY
a c a c 35 4 25 4 35 6 25 4 35 6 25 4 35 10 25 6 35 16 25 10 35 25 25 20 35 25 20 35 25 35 25 35 25
Setting Range (A) Max. Fuse Ratings (A)quick+) slow+)
According to IEC 292-1A coordination types a and c.
Tripping Characteristicswfrom hot condition kfrom cold condition
trip
ping
tim
e/s
10000
1000
100
10
1
0.1
0.01
0.0011 2 4 6 10 20 40 60 100
w
k
0.8
THERMAL OVERLOAD CHARACTERISTICSAverage values at 20c ambient temperature, tripping three phase from cold condition 0.40 0.62
0.60 0.920.85 1.3 1.2 1.9 1.8 2.8 2.7 4.2 4 6.2 6 9.2 8 12 11 16
nominal current
Overload Selection
International Standards and ApprovalsDIRECT ON LINEMOTORSTARTERInternational Protection IP66 to AS 1939:1990 and BS 5490:1977.AS 1202 Pt 1:1981 AC Motorstarters Direct on LineBS 4941 Pt 1:1979 Direct on Line AC Starters IEC 947, switch operation and cover markingPatented Stop/Reset MechanismThe switched versions (56MS400SW and 56MS230SW) comply with New Zealand Electrical Wiring Regulation 108.Manufactured to ISO 9001
CONTACTORIEC 947EN 60947VDE 0660Manufactured to ISO 9001
OVERLOADIEC 292VDE 0660BS 587 and BS 5424Manufactured to ISO 9001
Defi nition of UtilisationCategoriesto IEC60947-3 BS 5419
AC23A:Switching of motor loads or other highly inductive loads.Occasional:Making 10 times le (Rated operational current)Breaking 8 times le
AC3:Starting of squirrel cage motors, and switching off motors during running.Occasional:Making 10 times leBreaking 10 times le
AC11:Feed control of magnetic drives, contactors, valves and electromagnets.
Occasional:Making 11 times leBreaking 11 times le
TECHNICALINFORMATION
MOTOR RATING
THREE PHASE 400V SINGLE PHASE 230V
kW HP ADJUSTMENTRANGE (A)
RECOMMENDEDOVERLOAD
ADJUSTMENTRANGE (A)
RECOMMENDEDOVERLOAD
0.18 0.25 0.6-0.92 56T9092 1.8-2.8 56T928
0.25 0.33 0.6-0.92 56T9092 2.7-4.2 56T942
0.37 0.50 0.85-1.3 56T913 4-6.2 56T962
0.55 0.75 1.2-1.9 56T919 4-6.2 56T962
0.75 1.0 1.8-2.8 56T928 6-9.2 56T992
1.1 1.5 2.7-4.2 56T942 8-12 56T9120
1.5 2.0 2.7-4.2 56T942 11-16 56T9160
2.2 3.0 4-6.2 56T962
3.0 4.0 6-9.2 56T992
4.0 5.5 6-9.2 56T992
5.5 7.5 8-12 56T9120
14-2 115919 SCHELE 56 Series Cat42 4214-2 115919 SCHELE 56 Series Cat42 42 25/10/2006 11:47:21 AM25/10/2006 11:47:21 AM
43
main egg image inside this egg, take off keyline
Protected and Mobile to IP66
Ordering Information:Stock codes: 56C310EL2PRO (pictured) 56SO4ELP15RO
NOTE: Product information page 16
NOTE: Product information page 26
Programmable Time Delay Module 3 operation modes On Delay with Manual
Override, On Delay with no Manual Override, Off Delay with Manual Override.
32 Selectable time delays from 15 seconds up to 2 hours.
Fits into a standard 600 Series module aperture. Interchangeable coloured face plates. Blue LED status indicator. 3A current rating. Also compatible with 800 Series.
NEW PDL 56 Series Portable Protected OutletsWe have gone mobile for the building and trade industry.Check these features:c Industry proven 56 Series and Merlin Gerin
technologyc Rugged construction to IP66c RCD & Overload protectionc Two product options v 10A double combination switched socket outlets v 15A four gang integrally (auto) switched socket outletsc Easy to carry handlec 2 metre heavy duty flexible cord setc Available in Resistant Orange (RO) for the electrical industry
14-2 115919 SCHELE 56 Series Cat43 4314-2 115919 SCHELE 56 Series Cat43 43 25/10/2006 11:47:24 AM25/10/2006 11:47:24 AM
44
Chemical Compatibility 56 Series Grey
56 Series Orange &
White
PDLEnclosures
PBTA ABS
Acids
Hydrochloric Acid (10%) A A A A A
Sulphuric Acid (10%) A A A A B
Acetic Acid (10%) C A A A D
Bases
Potassium Hydroxide C A A B N/T
Sodium Hydroxide C A A B A
Ammonium Hydroxide D C B C B
Organic Solvents
Ethyl Alcohol B A A A C
Methyl Alcohol B B A A C
Isopropyl Alcohol B A A A D
Heptane N/T A N/T N/T N/T
Acetone D D D D D
Methylethylketone D D D D D
Ethyl Acetate N/T D N/T N/T D
Methylene Chloride N/T D N/T N/T N/T
Ethylene Glycol N/T A N/T N/T N/T
Automotive Related Environments
Motor Oil C A N/T A C
Transmission Fluid C A N/T A C
Power Steering Fluid C A N/T A C
A Excellent Compatible, no problems expected from the use of the chemical with this part.
B Good Acceptable, minimal loss of chemical properties after prolonged exposure.
C Fair Marginally compatible, extended use of the chemical may cause deterioration and cracking of the part.
D Poor Incompatible. Do not recommend the use of the chemical with this part.
N/T Not Tested
This table is a guide only. Performance of product in a particular environment will be affected by a wide variety of factors, of which chemical compatibility is only one. End users should test for their particular environment.
RATINGS
Chemical ResistanceChemical Compatibility 56
Series Grey
56 Series Orange &
White
PDLEnclosures
PBTA ABS
Brake Fluid D A N/T A C
Regular Petrol D A A A D