Click here to load reader
Upload
claudioandrevalverde
View
215
Download
1
Embed Size (px)
DESCRIPTION
gaxeta dupla ação parker
Citation preview
Click to Go to SECTION
Table of Contents
Click to Go to CATALOG
Table of Contents
Parker Hannifin CorporationEngineered Polymer Systems Division
Phone: 801 972 3000
7-30
www.parker.com/eps
7
06/01/2014
Catalog EPS 5370/USA
Piston Seal R5 Profile
R5 Profile, Rectangular PTFE Cap Seal
The Parker R5 profile is a bi-directional piston seal for use in medium to heavy duty hydraulic actuators and is suitable for sealing against hardened surfaces in pneumatic applications. The R5 profile is a two piece design comprised of a standard size rubber square ring energizing a rectangular shaped PTFE cap. The R5 profile offers excellent stability, long wear, low friction and extrusion protection. The seal is commonly used in applications such as agriculture hydraulics, mobile hydraulics, machine tools and hydraulic presses. Parkers R5 profile will retrofit non-Parker seals of similar design and is an updated version of the Parker R5100 piston seal.
The R5 profile may be ordered without the energizer by omitting the energizer code. See part number nomenclature.
R5 Cross-Section
Technical Data
Standard Temperature Pressure Surface Materials Range Range Speed
Cap0203 15% Fiberglass -200F to +575F 3500 psi < 13 ft/s filled PTFE (-129C to +302C) (241 bar) (4 m/s)
Energizer A 70A Nitrile -30F to +250F (-34C to +121C)Alternate Materials: For applications that may require an alternate material, please see Section 3 for alternate PTFE (Table 3-4) and energizer (Table 3-5) materials.
Pressure Range without wear rings. If used with wear rings, see Table 2-4, page 2-5.
OptionsSplit Rings: To aid in installation, the PTFE ring can be supplied in one of the following split configurations. To indicate that the R5 profile is to be split, add the appropriate split type indicator to the end of the part number.
S = Step CutT = Butt CutV = Bevel cut
R5 installed in Piston Gland Step Butt Bevel S T V
Click to Go to SECTION
Table of Contents
Click to Go to CATALOG
Table of Contents
Parker Hannifin CorporationEngineered Polymer Systems Division
Phone: 801 972 3000
7-31
www.parker.com/eps
7
06/01/2014
Catalog EPS 5370/USA
R5 Profile
Part Number Nomenclature R5 ProfileTable 7-28. R5 Profile
0 2 0 3 R5
Seal Compound 4-Digit Material CodeExample:0203 = 15% Fiberglass-filled PTFE
Profile
2 8 0 0 5 0 00 0 -
Groove Width (x1000) Example: .284 X 1000 = 284
Bore Diameter (x1000)Example: 5.000 X 1000 = 05000
2 8 4 A
Gland Depth (x1000) Example: .280 X 1000 = 280
Energizer Material CodeA = 70A NitrileOmit = No Energizer
Option: Split Ring OptionsS = Step CutT = Butt CutV = Bevel Cut
Gland Dimensions R5 ProfileC
B AD
Gland Depth
Table 7-29. R5 Profile Piston Gland Calculation
ABore
DiameterGland Depth
BGroove
Diameter
CGroove Width
D Piston
Diameter*Square
Ring Series
Range Tol Calc. Tol Width Tol Calc. Tol.
1.000 - 2.750 +.002/-.000 0.155 Dia. A - .310 +.001/-.001 0.129 +.002/-.002 Dia. A - .001 +.000/-.001 7-1xx
3.000 - 5.000 +.003/-.000 0.280 Dia. A - .560 +.002/-.002 0.284 +.003/-.003 Dia. A - .002 +.000/-.002 7-3xx
5.250 - 8.500 +.004/-.000 0.381 Dia. A - .762 +.003/-.003 0.379 +.004/-.004 Dia. A - .003 +.000/-.003 7-4xx
9.000 - 14.000 +.004/-.000 0.439 Dia. A - .878 +.004/-.004 0.379 +.004/-.004 Dia. A - .004 +.000/-.004 7-4xx
* If used with wear rings, refer to wear ring piston diameter, see Section 9. For custom groove calculations, see Appendix C.
Above table reflects recommended cross-sections for Bore diameters shown. Alternate cross-sections and additional sizes may be considered. Consult www.parker.com/eps/FluidPower for hardware specifications, additional cross-sections and sizes, corresponding square ring number and part number availability. Contact your Parker representative for assistance.