Upload
carlos-a-galeano-a
View
116
Download
6
Tags:
Embed Size (px)
Citation preview
Dialog Television
User’s Manual CDVB5110D
2
1. Important Safety Instructions…………………………………………………………
2. Connecting to TV……………………………………………………………………….
3. Controls & Functions
a. Front panel……………………………………………………………………..
b. Rear Panel……………………………………………………………………..
c. Remote Control Unit…………………………………………………………..
4. Settings & Operations
a. Restore factory Re-set…………………………………………………………
b. Parental Control………………………………………………………………...
c. Favorite Channel Selection……………………………………………………
d. Timer Reservations…………………………………………………………….
e. Program Guide –EPG………………………………………………………….
f. Manual Scan…………………………………………………………………….
g. Performance…………………………………………………………………….
5. Trouble Shooting………………………………………………………………………...
Table of Contents
3
Power Supply
95~240V AC 50/60Hz ( general)
Location
Locate the receiver in an indoor location with good ventilation, suitable temperature, no direct sunrays,
low humidity, and low vibration. Unplug the STB during lightening, storms or when unused for long
periods of time.
Place the receiver at least 30cm from the wall & do not put heavy objects or any electrical appliance on
top of the receiver.
Avoid Overloading
Do not overload wall outlets, extension cords or adapters as this can result in fire or electric shock.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
NOTE : if not used for long, please remember to pull out the power cable or turn off the power.
Important Safety Instructions
The symbol, is intended to alert the user to the presence of un-insulated “dangerous
voltage“ within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons
The symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product
4
Cleaning
Disconnect the STB from the wall socket before cleaning. Use a dry cloth to dust the STB.
Avoid objects & Liquid Entry
Do not insert any kinds of small objects such as coins into the receiver & keep liquids away, as it may
result in short circuit.
Ventilation Openings
The Receiver’s ventilation openings prevent itself from heating. Do not block then as it may cause
malfunctioning. Ensure that free airflow is maintained around the receiver.
5
1. Connect your aerial into the set top boxes RF - IN socket.
2. Connect the supplied RCA cables to the Set Top Box RCA outputs and your TVs RCA inputs.
Connecting STB (SET TOP BOX) to TV
RCA video /audio Connector
6
CDVB5110D (Coship)
Front Panel
1 POWER - Press to switch between operation and standby modes
2 OK – Press to display program list or confirm an item in the menu
3 , 5 VOL – Adjust the volume when watching a channel, or move to the left or right item
in the menu
4 , 7 CH – Change the previous or next channel when watching TV, or move to the next
higher or lower item in the menu.
6 MENU – Press to display main menu
Controls and Functions
7
Rear Panel
1 LOOP OUT - if loop through output from digital tuner
2 RS232 – Connect to a PC for software upgrade
3 S/P DIF – Output for connection to a digital amplifier
4 S-VIDEO – Connect to the S-VHS jack on the TV
5 VIDEO – Video signal from the receiver to the TV
6 MONO – Mono signal from your receiver to TV
7 LBN IN – Connect to Satellite antenna (If input from LNB to digital tuner)
8 RF IN – Signal input from local CATV network or outdoor TV antenna
9 RF OUT – UHF RF output to TV set’s antenna in
10 ,11 LEFT / RIGHT – Audio signal from your receiver to TV
12 100-240V~ - Power Supply
13 ON / OFF – Main power switch
8
Remote Control Unit (RCU)
Press to switch between TV &
radio mode
Press to temporarily mute
Numeric Keys
Select the program that was
previously viewed
Main Menu or return to
screen from sub menu
Press to switch between
operation & Standby mode
Press to capture video image
Key unavailable
Switch between TV & AV mode
Press to show channel bar while
watching TV
20 & 23 – Move up/down the
highlighted bar for selecting options on
the menu
Press to return to previous menu
22 & 7 – To change program. press to
toggle among options or for input box
active or volume control
Press display TV program select
window. Also used to select an
item from the menu
Press for EEPG info window
Press for audio setting window
Key unavailable
11 & 13Move up/down a page in TV program select window
Key unavailable
Key unavailable
Press to display favorite TV list window
25 & 26 Key unavailable
27 & 29 - Volume control when
watching TV
28 & 30 - Key unavailable
9
CDVB5110D (Coship)
Restore Factory Re-Set (Factory Default)
The operation deletes all the data currently saved and settings and returns the system to the
initial status.
1. Press ‘Menu’ button
2. Select ‘Installation’
3. Enter password
4. Press ‘OK’ to continue, ‘EXIT’ to cancel
Parental Control
In order to prevent certain channels being viewed.
To enable the parental Control
1. Press ‘Menu’ button
2. Select ‘Parental Control’
3. Enter password
4. Select ‘LOCK’ or ‘NO LOCK’
To set Channels for blocking
1. Press ‘Menu’ button
2. Select ‘Installation’
3. Enter password
4. Select ‘Channel Edit’
5. Select the channel & press ‘LOCK/NO LOCK’ (using yellow button on RCU)
Settings and Operations
10
Favorite Channel Selection
To designate the channels of the current TV list as the favorite channel.
Add to favorite list
1. Press ‘Menu’ button
2. Select ‘Installation’
3. Select ‘Set favorite list’
4. Add channels as instructions given
Edit channels from favorite list
1. Press ‘Menu’ button
2. Select ‘Installation’
3. Select ‘ favorite list edit’
4. Select the respective channel from the favorite list from keys.
5. Use the four color keys on the RCU for the necessary function
Skip (Red Key) Move (Green Key)
Lock (yellow Key) Delete (Blue Key)
Timer reservations
This function allows to set the time to make the receiver perform the designated actions
including timer based wakeup/sleep the STB.
The function is not available with the Coship STB.
Program Guide – EPG
EPG shows the event information on the current TP channel by time zone. The event is
displayed only at the channel’s that has EPG information. EPG is divided into daily, weekly &
extended mode. When EPG button is pressed daily mode is displayed as a default.
Press EPG button on the RCU.
11
Manual Scan
The function allows searching for channels on a manual mode.
1. Press ‘Menu’ button
2. Select ‘Installation’
3. Enter password
4. Select ‘Channel search’
5. Select ‘Manual Search’ ( Blue button on RCU)
Performance
The function allows verifying the link quality and the power.
Press the ‘Red’ button on the remote control unit(RCU).
Seq No
Fault Identification Possible Cause for Error Possible action (by customer)
1 Error Messages - E-04 / E-05 / E-06 / E-07
Smart Card Problem Remove; Clean contacts; Re-insert
2 Error Messages - E-17 Smart Card / STB Mismatch Place the original SIM card in the original STB
3 Error Messages - E-30 Waiting for authorization Wait for 2 minutes and if message does not disappear automatically, call DTV hotline
4 Error Messages - E-48 / E-52 No Reception check Weather / Dish alignment
5 Error Messages - E-50 No Services Tuned Rescan + Check all TPs level & quality
7 STB - No Power (No LEDs ON) Power unit failure Check power supply
8 STB - No Power (Only red LED is ON) Power unit failure Call DTV hotline
9 STB - STB hanging / 8888 / 0000 / LOCK STB issue Try a factory reset
10 STB - STB Non-responsive STB issue Power reset
11 STB - STB Restarting STB issue Power reset/factory reset
12 Video - Blank (No audio and video) STB not responding/cable error power reset/check AV cables
13 Video - Blank but can see Information Bar MPEG decoding problem Channel swap/power reset/factory reset
14 Video - Black and white only Video standard mismatch Check settings on TV/check STB video output setting(PAL)
15 Video - Abnormal colors video output problem Check settings on TV/check STB video output setting(PAL)/power reset/factory reset
16 Video - No video but can hear audio video decoding problem check video cable/Channel swap/power reset/factory reset
17 Video - Video freeze STB not responding/signal interference
power reset/channel re-scan/factory reset
18 Video - Some channels / Channel blocks missing
Signal interference Rescan + Check all TPs level & quality
19 Audio - No audio Audio decoding problem power reset/check AV cables
20 Audio - Audio corrupted Audio decoding problem power reset/factory reset/check for loose connections
21 Remote - No response RCU issue Check battery and polarity
Trouble Shoots