Embed Size (px)
Citation preview
3304 DIT EngineGross Power 101 kW 136 hpFlywheel 89.5 kW 120 hp
Operating Weight 18 364 kg 40,450 lbs
Featured machine may include additional equipment applicableonly for special applications. See your Caterpillar® dealer foravailable options.
517Skidder
®
2
Application FlexibilityThe 517 Skidder provides unsurpassedperformance and application flexibilitydue to superior balance, torqueconverter power train and expandedtrack and grapple/arch options. The versatile PAT blade makes the 517 a multi-purpose machine. pg. 5
517 SkidderThe 517 Skidder is designed to maximize skidding performance, reliability and ease of operation to exceed the customer’s expectations.
Power TrainThe field proven Cat® 3304 DIT dieselengine, heavy-duty torque converterand three-speed transmission arematched to deliver high horsepower formore drawbar pull, improved skiddingperformance and ease of operation.pg. 4
UndercarriageUse of D5H sized heavy-duty trackprolongs the life of the keyundercarriage components, includingrollers, idlers, pins, bushings and shoes.An extended track roller frame placesmore track under grapple/winch loadsand enhances balance. pg. 6
Engineered for demanding work.The 517 Skidder is a state-of-the-artmachine that represents Caterpillar’scommitment to the logging industry.
Reliable, durable operation.The 517 Skidder builds upon a stronghistory of reliability and durability set by the 527 and previous generations of Caterpillar track-type skidders.
3
Operator StationExcellent all-around viewing area,angled seat, and easy-to-reach controlsreduce operator fatigue and increaseproductivity. Available with enclosedcab or open canopy. pg. 8-9
Load-Sensing Hydraulic SystemThe load sensing hydraulic systemreduces horsepower consumption andsystem heat. A single lever controlsgrapple and tong hydraulics, reducingoperator efforts for improvedproductivity. Exclusive Auto-Grabhydraulics maintain constant tonggripping pressures to compensate forshifting loads. pg. 7
The 517 Cable SkidderThe 517 is also offered in a cableconfiguration to meet applicationdemands in severe slope andmountainous terrain. pg. 10
Serviceability/Customer SupportMany convenient service features,including parts availability supported by a worldwide computer network,enhance Caterpillar’s total commitmentto customer support. pg. 11
4
Turbocharged Cat 3304 DIT dieselengine sets the industry standard for reliability and durability. Its fourcylinder, four stroke design delivers 136 hp (101 kW) at 2200 rpm.
■ A direct-injection fuel system usesadjustment-free unit fuel injectors forefficient, accurate fuel metering andreduced emissions.
■ Pre-screener removes large debrisbefore it reaches the air cleaner toprovide significant engine protectionin harsh logging environments.
■ Resilient engine mounting results inquieter operation and less vibration.
Large, heavy-duty torque converter ismatched to the 3304 engine power forexcellent drawbar pull and improvedskidding performance.
■ A fluid coupling allows the engine torun in its optimal rpm range for moreefficient use of available enginepower.
Power TrainFour cylinder, four stroke engine and heavy-duty torque converter significantly improveskidding performance.
■ The torque converter reduces thetendency for track-to-ground slip,further improving the 517’sperformance in soft underfootconditions.
■ Less operator effort is required tomatch gear range to engine rpm astorque multiplication reduces the needfor up and down-shifting.
■ Traction and load induced shocks areabsorbed by the fluid coupling of theconverter, thereby protecting powertrain components and contributing tolonger life.
Six-row radiator core has large surfaceareas for improved heat rejection.
■ High volume fan for increased airflowand improved cooling ability.
■ High fan speed (2200 rpm) allowsmachine to operate in high, ambienttemperatures.
■ Modular steel cores increasedurability and resistance to corrosion.
■ Each core module can be replacedindividually, saving considerable costand repair time.
Three-speed planetary power shifttransmission is designed and built byCaterpillar and delivers three speeds inboth forward and reverse. This field-proven system works best in high-pullapplications and is well suited for largeload and steep terrain skidding.
■ The 517 has increased coolingcapacity to meet the demands oflogging applications and extend thelife of key power train components.
5
Maximum skidding performance is best attained through theavailable swing boom and grapple. This tool is ideal for site-sensitive locations with soft underfoot terrain.
High horsepower and torque further enhance the 517’s dozingabilities. The available PAT blade offers high levels ofversatility in dozing, decking, and pioneering applications.
Expanded track options allow the 517 to maintain skiddingperformance and minimize ground disturbance in a widerange of ground conditions.
Excellent ground clearance of 25" (646 mm) allows the 517to readily avoid obstacles, maneuver in poor underfootconditions, and work effectively and efficiently on snowcovered sites.
Application Flexibility The 517 Skidder can easily handle a variety of tasks and applications for today’s loggers.
6
Heavy-duty track roller frame andundercarriage are key to the 517’ssuperior balance and durability.
■ Available with 7 or 8 rollers, theextended track roller frame placesrear idlers beneath grapple/winchloads, improving skidder balance and performance.
■ D5H sized heavy duty undercarriagecomponents better withstand impactand abrasion, enhancing wear life.
Supported undercarriage optionsreduce stress loads and impact forces onundercarriage assemblies and contributeto longer system life.
■ Tri track shoes [available in widths of26" (660 mm) and 30" (760 mm)]provide an additional outer row oflinks for improved durability.
■ Additional width of supportedundercarriage reduces grounddisturbance/compaction and improvesskidder flotation.
UndercarriageUndercarriage options provide optimized performance and durability, while allowingcustomization for different logging applications.
2910 mm(115")
Center of gravity
Center of gravity
2636 mm(104")
D4H TSK:
517:
7
Load sensing hydraulics utilize a loadsensing, variable displacement pumpand pressure compensating systemwhich continually monitors dozer andgrapple hydraulic power requirements.
■ System reduces engine horsepowerdemand by placing pump in lowpressure stand-by when not neededfor hydraulic output.
■ More power is available to the drivetrain for increased skidding powerand efficiency.
■ Compensator valve has pressurelimiting ability, protecting the pump and hydraulic system fromdamaging overloads.
HydraulicsLoad Sensing Hydraulic system improves skidding performance and efficiency.
������������������
1 3
2
4
GrappleCylinderPressure
PumpPressure
Horsepower saved
The Auto-Grab Advantage
1 Load shifts in grapple
2 Pump pressure increases totighten grapple tongs
3 Grip on logs is maintained
4 Pump pressure returns to low level
The Auto-Grab feature from Caterpillarconstantly monitors and adjusts tong pressure as needed to securelyhold grapple loads while skidding.
■ Provides constant tong pressure without continuoushydraulic pump demand.
■ Activated by switch onright hand console.
8
Operator StationDesigned for operator comfort and ease of operation to ensure maximum productivity.
23
1
7
8
9
4
9
Easy and comfortable operation.Modular ROPS/FOPS cab is resilientlymounted to the frame. Large windowarea allows excellent front and rearviewing area. Cab is sealed andpressurized for sound level reductionand improved operator comfort.
1 Power shift transmission deliversthree speeds forward and threereverse. Gear selection is quickand easy.
2 Clutch and brake steering controlseach track individually providingexceptional maneuverability.
3 Electronic monitoring systemmonitors critical machine functionsand has a three-level warning systemto inform operators of potentialproblems.
4 Single-lever blade control managesall blade functions including height,angle and tilt.
5 Single-lever grapple control allowsfor simplified operation and reducedoperator fatigue.
6 Auto-Grab switch activates thesystem that monitors and adjusts tong pressure to maintain a securegrip on grapple loads.
7 Standard suspension seat is angledten degrees to the right so theoperator can more comfortablyobserve grapple/winch functions tothe rear.
8 Air-conditioning is standard with theenclosed cab. Controls allowoperator to manage cab temperaturefor optimal comfort levels.
9 Polycarbonate windows provideexcellent viewing and eliminate theneed for screens.
10 Open ROPS/FOPS canopy is standardwith side, front, and rear screens,vandalism protection and optionalheater.
6
5
10
10
The 517 Cable SkidderThe 517 winch is specifically designed for the 517 to help maximize productivity.
Exceptional winching performance.The combination of high drawbar pull,torque converter driveline and balanceenable the 517 to overcome the loadscreated during winch application. ■ The winch delivers an impressive
68,782 lb (31 264 kg) of line pull. ■ 517 winch controls operate reel-in,
reel-out brake and freespool functions. ■ Modulation of the winch brake
control can be utilized to manipulatethe load during winch applications inmountainous environments.
Superior balance and pulling powerenable the 517 to skid large loads withthe optional 517 winch. This highlyproductive winch has been specificallydesigned for the 517 skidder in steepand mountainous skidding applications.
11
Built-in servicing ease. Less servicetime means more working time. Majorcomponents are made as modules andmost can be removed without disturbingor removing others.
Ground-level access providesconvenient servicing to most filters and lube points.
ServiceabilityThe most serviceable machines from the most committed dealers.
Complete Customer SupportCat dealer services help you operate longer with lower costs.
Your Cat dealer offers a wide range of services that can be set up under acustomer support agreement when youpurchase your equipment. The dealerwill help you choose a plan that cancover everything from machine andattachment selection to replacement, to help you get the best return on yourinvestment.
Selection. Make detailed comparisonsof the machines you are consideringbefore you buy. How long docomponents last? What is the cost ofpreventive maintenance? What is thetrue cost of lost production? Your Catdealer can give you precise answers tothese questions.
Purchase. Look past initial price.Consider the financing options availableas well as day-to-day operating costs.This is also the time to look at dealerservices that can be included in the costof the machine to yield lower equipmentowning and operating costs over thelong run.
Operation. Improving operatingtechniques can boost your profits. Your Cat dealer has training videotapes,literature and other ideas to help youincrease productivity.
Replacement. Repair, rebuild orreplace? Your Cat dealer can help youevaluate the cost involved so you canmake the right choice.
Product Support. You will find nearlyall parts at our dealer parts counter. Cat dealers utilize a world-widecomputer network to find in-stock parts to minimize machine down time. Save money with remanufactured parts. You receive the same warrantyand reliability as new products at costsavings of 40 to 70 percent.
Maintenance. More and moreequipment buyers are planning foreffective maintenance before buyingequipment. Choose from your dealer’swide range of maintenance services atthe time you purchase your machine.Repair option programs guarantee thecost of repairs up front. Diagnosticprograms such as Scheduled OilSampling and Technical Analysis helpyou avoid unscheduled repairs.
Centrifugal pre-screener removes largedebris before it reaches the internal aircleaner, significantly increasing engineprotection.
Spin-on fuel and engine oil filters save changing time.
Radial seal air filters are easy tochange, reducing air filter maintenancetimes.
24-volt electrical system deliversincreased electrical power for enginecranking, lights, and engine diagnostics.
12
EngineFour-stroke cycle, four cylinder 3304 DIT diesel engine.
*Power rating conditions
■ based on standard air conditions of25°C (77°F) and 99 kPa (29.32" Hg.)dry barometer
■ used 35° API gravity fuel having anLHV of 42 780 kJ/kg (18,390 Btu/lb)when used at 30°C (86°F) [ref. a fueldensity of 838.9 g/L (7.001 lb/U.S.gal)]
■ net power advertised is the poweravailable at the flywheel when theengine is equipped with fan,alternator, air cleaner, and muffler
■ no derating required up to 2286 m(7500 ft) altitude
Features
■ cam-turned and tapered, castaluminum-alloy pistons have threerings and are cooled by oil spray
■ steel backed, copper-bondedcrankshaft bearings
■ hardened crankshaft journals■ dry-type air cleaners with primary
and secondary elements ■ exclusive centrifugal pre-cleaner■ 24-volt electric starting system
with 75-amp alternator and two 700 CCA-batteries
Ratings at 2200 rpm* kW hp
Gross power 101 136
Net power 89.5 120
The following ratings apply at 2200 rpm when tested under thespecified standard conditions for the specified standard:
Net power kW hp
Caterpillar 89.5 120
ISO 9249 89.5 120
SAE J1349 88.7 119
80/1269 EEC 89.5 120
Dimensions
Bore 120.65 mm 4.75 in
Stroke 152.4 mm 6.0 in
Displacement 7.0 L 425 in3
Hydraulic ControlsLoad-sensing, variable displacement piston pump.
Max. Pump capacity of 119 lpm at 20 690 kPa/207 bar /3000 psiat rpm rated engine speed of 2200
Tilt cylinder flow 60 liters/min 15.8 gpm
Angle cylinder flow 119 liters/min 31.4 gpm
Lift cylinder flow 119 liters/min 31.4gpm
Maximum system pressure 20 690 kPa/207 bar 3000 psi
Implement circuit pressures
Bulldozer lift 20 690 kPa/207 bar 3000 psi
Bulldozer tilt 20 690 kPa/207 bar 3000 psi
Bulldozer angle 20 690 kPa/207 bar 3000 psi
Grapple valve, three or five stack and pilot control valve
Grapple system supply pressure 20 690 kPa/207bar 3000 psi
Drive geared from engine flywheel
Load Sensing hydraulic features
■ system reduces pump output whenhydraulic demand is low
■ draws less engine power, providingmore power to the drawbar
■ hydraulic power is used moreeffectively and only when needed
■ simplifies the skidder operation andsaves fuel
TransmissionCat three-speed power shift design withheavy-duty torque converter.
Maximum travel speeds
km/h mphForward 1 3.7 2.3
2 6.6 4.1
3 11.5 7.1
Reverse 1 4.6 2.8
2 8.0 5.0
3 14.2 8.8
Features
■ planetary gear sets withintransmission provide additionaltorque multiplication
■ no clutching required to change gears■ gear selection is quick and accurate■ power shift transmission and torque
converter reduce the need for gearchanging and better match drawbarpull to ground conditions
517 Skidder specifications
13517 Skidder specifications
Winch Rugged 517 winch with freespool.
517 GR 517 CA Mechanical Retrieval Device Winch
(Optional attachment with single function arch)
Weight 312 kg 686 lb 1500 kg 3300 lb
Winch length 720 mm 28.3" 1120 mm 44.1"
Winch case width 627 mm 24.7" 975 mm 38.3"
Flange diameter 315 mm 12.4" 504 mm 19.9"
Drum width 241 mm 9.5" 330 mm 13.0"
Drum diameter 178 mm 7.0" 254 mm 10.0"
Cable size:
Recommended 16 mm 0.62" 19 mm 0.75"
Optional 19 mm 0.75" 22 mm 0.88"
Drum capacity:
Recommended cable 46 m 151' 122 m 400'
Optional cable 32 m 105' 88 m 290'
Oil capacity 13.7 L 3.5 gal 74 L 19.5 gal
Cable/ferrule sizes(OD x length) 41 mm x 51 mm (1.62" x 2") 54 mm x 65 mm (2.12" x 2.56")
Maximum linepull 18 660 kg* 41,050 lb* 31 264 kg** 68,782 lb**
Maximum linespeed 77 mpm* 253 fpm* 40.5 mpm** 133 fpm**
Operating Weights(approximate)
Grapple kg lb
Operating weightincludes enclosed cab, PAT blade, swing boom, 8 ft2 sorting grapple, 8-roller track frame, 8-roller track guards,26" (660 mm) tri-link track and full fuel tank 18 364 40,450
Cable
Operating weightincludes enclosed cab, PAT blade, 517 winch, 8-roller track frame 26" (660 mm) tri-link track and full fuel tank 17 343 38,200
ROPS/FOPSROPS/FOPS canopy is standard.
Features
■ ROPS (Rollover Protective Structure)offered by Caterpillar for the machinemeets ROPS criteria SAE J395, SAE J1040 APR88, ISO 3471-1:1986, ISO 3471: 1994
■ FOPS (Falling Object ProtectiveStructure) meets FOPS criteria SAE J231 JAN81 and ISO 3449 1992LEVEL II
Features
■ hydraulically actuated multiple-disc wet clutch and brake■ equal speed in gearing in forward and reverse■ freespool with drag adjustment■ Caterpillar parts support■ four roller fairlead
* with 0.62" cable ** with 0.88" cable
14 517 Skidder specifications
Final DriveSingle reduction final drives.
Features
■ isolated from ground-impact andblade-induced loads
■ modular design reduces removal andinstallation time
■ segmented sprocket simplifiesreplacement
Pivot Shaft and Equalizer BarPivot shaft and pinned equalizer baroscillation system.
Features
■ pivot shaft transmits ground impactloads directly to main frame
■ protects power train components■ pinned equalizer bar keeps track
roller frame in proper alignment■ system provides smooth machine
underside■ helps prevent collection of mud
and debris
Service RefillU.S.
L Gallons
Fuel tank 260 69
Cooling system 38 10
Crankcase 19 5
Transmission andtorque converter 125 33
Final drives 5.7 1.5
Hydraulic Tank 29.5 7.8
Operator Station
Features
■ enclosed cab and open canopy withscreens meets operator protectivestructure criteria for forestryequipment SAE J1084 APR80
■ single lever dozer control allows foreasy dozer operation
■ the seat is angled to the right by tendegrees providing a more comfortableview to grapple/winch operations
■ power shift transmission allows foreffortless and precise shifting
■ single lever control operates allarch/grapple functions
Electrical System24-volt
Features
■ two, 12-volt maintenance-freebatteries
■ 75-amp alternator■ wiring harnesses wrapped with
braided, vinyl-coated nylon shieldingfor maximum protection
■ connectors are self-sealing, yet stillallow easy service access
Steering and BrakingBrakes meet SAE J1026 APR90.
Lever steering features
■ hand-lever steering/braking controls■ oil-cooled, hydraulically actuated
multiple-disc steering clutches andbrakes
■ single brake pedal brakes both trackswithout disengaging steering clutches
■ mechanically actuated, spring appliedparking brake
15517 Skidder specifications
DimensionsAll dimensions are approximate.
Fixed Grapple:
Swing Boom:
Cable:
4970 mm(16'3")
2910 mm(9'6")
1500 mm(4'9") 57 mm
(2.2")GROUSERHEIGHT
987 mm**(3'2")
1557 mm*(5'1")
* - Top of drum** - Top of guard
3302 mm(10'10")
2000 mm(6'6")
GAUGE
646 mm(2'1")
2560 mm(8'4")
517
4505 mm(14'8")
5414 mm(17'9")
2910 mm(9'6")
1500 mm(4'9") 57 mm
(2.2")GROUSERHEIGHT
797.5 mm(2'7")
2974 mm(9'9")
3302 mm(10'10")
2000 mm(6'6")
GAUGE 2560 mm
(8'4")
517
4594 mm(15'1")
5746 mm(18'10")
2910 mm(9'6")
1500 mm(4'9") 57 mm
(2.2")GROUSERHEIGHT
371 mm(14.6")
1415 mm(4'8")
3302 mm(10'10")
517
16 517 Skidder specifications
Dimension A* A1* B B1 C D
Single 2447 mm 909 mm 2974 mm — 1000 mm —Function (96 in) (36 in) (117 in) — (39.4 in) —
Swing Boom 3269 mm 1241 mm 4092 mm 2800 mm 1366 mm 1166 mmArch (128.6 in) (49 in) (161 in) (110 in) (54 in) (46 in)
Single-Function Arch■ versatile attachment suitable for
selection and clear cut applications■ reach consists of one vertical arc■ typical application include short cycles
and/or larger diameter timber
Swing Boom■ excellent reach to the rear and side for
maximum skidder versatility■ suitable for hard to reach timber on
steep slopes, soft ground, or selectionharvest or thinnings
■ reduces cycle times by reducing theamount of maneuvering of the skidderto reach logs
■ complements the 517 excellent viewingarea for outstanding operational easeand comfort
■ includes single lever swing boomcontrol
Arch ConfigurationsTwo arch configurations allow you to effectively match the 517 Skidder to a wide variety of skidding applications.
* Equipped with 8-roller track frame
A1
A
B
C
70°
C D
B1
B
A1
70°
70°
A
17517 Skidder specifications
Bunching Grapple Grapple Capacity (A) Tong Opening (B)
m2 ft2 mm in
517 Skidder 0.74 8.0 2286 90
Sorting Grapple■ used for 305 mm (12 in) or larger diameter trees■ designed to pick-up individual or several stems for
quick cycles
Bunching Grapple■ used for 305 mm (12 in) or smaller diameter trees■ designed to gather bundle of stems and maximize
grapple loads
GrapplesChoose from a variety of grapple configurations to meet your needs.
Sorting Grapple Grapple Capacity (A) Tong Opening (B)
m2 ft2 mm in
517 Skidder 0.74 8.0 2134 84
B
AB
A
18 517 Skidder specifications
Blade SpecificationsAll dimensions are approximate.
Undercarriage
517 Skidder 7-roller track frame 8-roller track frameOscillation:
front idlers at gauge line 143.2 mm 5.64" 143.2 mm 5.64"
at pivot shaft +2.8° +2.8°
Number of shoes (each side) 42 44
Width of shoes:
560 mm 22" - -
610 mm 24" - -
660 mm 26" 660 mm 26"
760 mm 30" 760 mm 30"
Length of track on ground 2710 mm 106.7" 2910 mm 114.6"
Track gauge 2000 mm 78.7" 2000 mm 78.7"
Ground contact area with:
560 mm (22") shoes 3.03 m2 4695 in2 - -
610 mm (24") shoes 3.30 m2 5122 in2 - -
660 mm (26") tri-link 3.58 m2 5548 in2 3.84 m2 5959 in2
760 mm (30") tri-link 4.13 m2 6402 in2 4.44 m2 6876 in2
Ground pressure 517 GR*:
560 mm (22") shoes 0.55 kg/cm2 7.83 psi - -
610 mm (24") shoes 0.50 kg/cm2 7.22 psi - -
660 mm (26") tri-link 0.50 kg/cm2 7.16 psi 0.48 kg/cm2 6.79 psi
760 mm (30") tri-link 0.44 kg/cm2 6.29 psi 0.42 kg/cm2 5.96 psi
Ground pressure 517 CA**:
560 mm (22") shoes 0.52 kg/cm2 7.35 psi - -
610 mm (24") shoes 0.47 kg/cm2 6.64 psi - -
660 mm (26") tri-link 0.47 kg/cm2 6.75 psi 0.45 kg/cm2 6.41 psi
760 mm (30") tri-link 0.42 kg/cm2 5.94 psi 0.40 kg/cm2 5.64 psi
PAT BladeWidth 2738 mm 108"
Width (angled 25°) 2476 mm 97.5"
Height 1077 mm 42.4"
Capacity 2.19 m3 2.86 yd3
Digging Depth 321 mm 12.6"
Ground Clearance 989 mm 38.9"
Maximum Tilt 505 mm 19.9"
Weight 1547 kg 3410 lbs
Features
■ Lifetime Lubricated rollers and idlers are directlymounted to roller frame
■ oscillating roller frames attach to tractor by pivot shaft and pinned equalizer bar
* Machine configured with enclosed cab, PAT blade, swing boom and 8 sq. ft. sorting grapple ** Machine configured with enclosed cab, PAT blade and winch
■ large pivot bushings operate in an oil reservoir■ equalizer bar saddle connection is low-friction
bushing with remote lube line■ recoil system fully sealed and lubricated■ track roller frames have box section design that
resists torsional loads
19517 Skidder specifications
Additional EquipmentWith approximate changes in operating weights.Note: Additional equipment may vary. Consult your Caterpillar dealer for specifics.
Standard EquipmentNote: Standard equipment may vary. Consult your Caterpillar dealer for specifics.
Air cleaner, with pre-screenerAlarm, back-upAlternator, 75-amp/24-voltBatteries, two 12-voltBrake system; service, parking and
secondaryBlower fanCap locks:
Oil fillerDipstickFuel tank fillFuel tank drainHydraulic tank fillRadiator fill
Coolers, dual transmission oilDirect electric starting, 24-voltElectronic Monitoring System (EMS)
Engine enclosures, perforatedEther starting aidFuel priming pumpGauges:
Engine coolant temperatureFuelTransmission oil temperature
Guards:Fenders, heavy-dutyExtreme service crankcaseFuel tank, heavy-dutyRadiator, heavy-duty punched holeFront brush sweepsPre-screener guard
Heavy duty starting motorHornHydraulics, load sensingLighting system, halogen
three front, two side, two rear
Muffler (shielded)Seat, vinyl covered suspension, angled
by ten degrees to the rightSeat beltSegmented sprocketSteering, clutch and brakeTorque converterTrack:
Adjusters, hydraulicHeavy-duty sealed and lubricatedTwo piece master linkEnd guiding guards
Transmission, power shift with threespeeds forward and reverse
kg lb
Bulldozer
4P, Power angle and tilt 1559 3434
Guards
Track roller guards:7 roller 279 6158 roller 316.4 696
Rear track guards 452 996
Sweep screen 72 159
Vandalism protection (canopy) 1.20 2.64
(cab) 0.80 1.76
Arches
Single function 1632 3594
Single function with mechanical retrieval device 2010 4428
Swing Boom 2345 5164
Grapples
Bunching 0.74 m2 (8 ft2) 714 1573
Sorting 0.74 m2 (8 ft2) 703 1548
kg lb
Operator Environment
Open ROPS/FOPS canopy 1037 2284
Enclosed ROPS/FOPS cab 1178 2594
Heater, ROPS canopy 76 168
Track Roller Frames
7 roller 3074 6770
8 roller 3221 7094
Undercarriage
Track, 560 mm (22") standard shoe 2520 5551
Track, 610 mm (24") standard shoe 2618 5766
Track, 660 mm (26") tri-link7 roller 3860 85018 roller 4105 9041
Track, 760 mm (30") tri-link7 roller 4043 89058 roller 4299 9470
Winch
Caterpillar 517 Winch 1522 3353
517 Skidder
AEHQ5319-01 (11-99)(Replaces AEHQ5319) Materials and specifications are subject to change without notice.
www.CAT.com
© 1998, 1999 CaterpillarPrinted in U.S.A.
®
