VEETRON Pharmacy Equipment :
50L Rotary Evaporator
Product range:R5003KE2 rotary evaporator
Model R1002B R2002B R2003KE R5003KE2
flask(L) 10 20 20 50
Receving flask(L) 5 10 10 20
Condenser double double triple triple
Heating bath 3kw 100℃ 5kw 100℃ 5kw 150℃ 9kw 150℃
Speed(rpm) 3-110 3-110 3-110 3-110
Dimensions(mm) 950×500×1800 1100×600×2100 1100×600×2100
evaporation(H2O) >3L/h >5L/h >5L/h >9L/h
Power supply 220V 220V 220V 380V
prolonged use · · · · Frequency-
converting · · · · Continuous
receving / / · ·
of pressure / / · ·
Throttle valve of
vacuum · · · · Mouth for testing
temperature / / · ·
temperature · · · ·
piston · · · · Glass screw
connector · · · · No spark electric
control system · · · · Flame-proof
electric motor / /
Lifted by electric
motor / /
o · · ·
cold trap / / · · PTFE sleeve · · · ·
Instruction: ●- Basic collocation ; ○- may be chosen
/- must not be chosen
Product range:R2003KE rotary evaporator
The parameter informations and quote of code: DSA50-GL2 are as
Dimension : 175x165x250mm, Tank size: 150x137x150mm
Cubage:2.0L, Power: 30-50w, Frequency: 20-40khz
Adjustable temperature: 0-80°C, Adjustable time:0-60min
Ampule Filling and Sealing Device( Manual) ( )
Hand Operated without gas cylinder for sealing, but supplied
with gas burner (Filling capacity from 10ml to 50ml)
Ampule Filling & Sealing Machine (Electric Operated)
Same as above but completely motorised with capacity
A bicycle frame is supported by a wooden stand, from the front
of which two uprights ascend and carry a desk and cross piece,
which provide for the attachment, directly in front of the subject,
of the tension balances and other pieces in front of the subject,
of the tension balances and other pieces of apparatus. A cast iron
wheel of 5 1/2 feet in circumference, weighing 22 Kilos and mounted
on ball bearing, is substituted for the back wheel. This wheel has
slightly beveled edges and is turned true. To the circumference of
this, a stout calico is applied, and the two ends of the band ate
attached to spring balances of 6 lbs. range (Graduated in one oz.)
calico-band to the balance pass round adjustable pulleys in order
to give them the right direction. An adjustable record counter
records the revolution of the wheel.
Ball Mill Motor Driven
For mixing & grinding, electrically operated having capacity
of few gms to 1 KG & 2 KG. Fitted with geared motor with max
speed of 80 rpm. The jar is made of SS and having steel balls of
different sizes to be put in jar for mixing & grinding
pesticides power. Jar is interchangeable and easily removable,
light in weight and compact unit working on 220 V AC with 1 KG
-- do -- SS Drum 2 KG capacity
-- do -- Aluminium Drum 1 Kg Capacity
-- do -- Aluminium drum 2 KG capacity
Bottle Filling Machine
Semi Automatic electric operated having filling cap. 50 to
300ml. Complete stainless steel body.
• With single syringe • With double syringe
Rotary Vacuum Film Evaporator (Buchi Type)
This model of evaporator is supplied complete with A.C.
non-sparking geared drive unit, support stand fitted with jack
arrangement of stainless steel rod for positioning glass assembly,
variable speed regulator, thermostatically controlled stainless
steel water bath fitted on a jack, double coiled glass condenser
with three opening for vacuum and cooling, pear shape evaporating
flask capacity 800ml. receiver flask capacity one litre with ball
joint, feeding tube and vapor path tube, a complete working unit.
All parts are power coated with apoxy / polyster hybrid, textured,
Siemens grey finish.
Electrically operated with 6 tubes.
Tablet Coating Pan
12" Dia, Stainless Steel : The machine is worked by oil immersed
gearbox with 1/4 H.P. motor driven, or by heavy duty DC geared
motor. Air blower is operated independently and air is
thermostatically controlled to give temperature 30Â° to 110Â°C.
Switches for motor & blower are fixed on a panel with neon
indicators. Also mains lead with 15 Amp plug provided.
Ointment Cream Filling Machine
Electrically operated. Suitable to fill tubes, bottles etc in
the range of 5gms to 90gms. per stroke, motorised operated (motor
1/2 HP or DC geared motor) The unit is supplied complete with 3 set
of standard nozzles and all electrical accessories in the motorized
Digital Display, these are designed to provide light effects for
multipurpose viewing in bacteriology, virology & Mycology labs.
An ideal instrument for counting bacterial and mould colonies in
culture work. It provides uniform flare free illumination to
minimise the strain on eyes and clearly defines even small
colonies. A 100mm dia lens covers the entire illuminations field
and its magnification assures highly accurate results. Counting
plate with standard wolfhugel ruling ensures clearly
and sharply defined colonies. Supplied complete with counting
plate, lens, cord and plug.
Friability Test Apparatus
Used to determine the durability and abrasivness of tablets. A
transparent perpex drum (made of imported perspex sheet 6.4mm thick
) 300mm dia x 35mm deep and white cover disc and nut, also a shaped
radial fixed blade which carries the tablets along with it up to
the central height and lets them off while the drum is rotating.
Thus the tablets rub against each other without any hard impact.
The drum rotates at a fixed speed of 30 RPM by a geared motor and
the rotation period is controlled by a timer (imported time switch
duration of 1 to 15 minutes) per determined end preset. The motor
unit is housed in a shaped steel cabinet with shaft extended on one
side upon which the drum rotates. Switches with neon indicators and
time switch are fitted on a panel and provided work on 220 Volts 50
C/s AC. Digital models also available.
Digital Bulk Density Apparatus
Preferably Torsion with a removable glass pan or S.S pan
suitable for weighing 50gms to 200gms and sensitivity 30gms for one
division indicator shifting on the index plates (Known as
dispensing balance) Available in following ranges
• 50gms • 100gms • 200gms
Dissolution Rate Test Equipment
The apparatus consists of 4 parts. A water bath with 500 watt
heater covered 1000ml. Vessel made from Borosil Glass and digital
temperature control. Variable speed motor, with 30 cms longs
stainless steel shaft. A cylindrical stainless steel basket and a
membrane fixing attachment, water bath is made of imported thick
acrylic sheet with transparent cover at top. Temperature of the
bath is maintained at 37Â°C with an accuracy of Â±1Â°C. A
cylindrical glass vessel of 1000ml capacity with slightly concave
bottom has a flenged edge at the top to accept a fitted cover
having four holes. One hole placed in the centre. The shaft of the
motor is fitted on an up right and has an electronic speed
regulating device that allows the speed to be varied from 25 to 250
RPM. The shaft is 6mm dia 30cms on with basket fitted at end
rotates smoothly and without any significant wobble. The basket
consists of two parts one of which is attached to the shaft. It is
of solid metal except for 2mm vent and is screwed on the main
shaft. Lower part of the basket is held with this part by means of
threading and this allows proper removal of lower part for
introduction of the test samples. The detachable part of the basket
is fabricated of stainless steel mesh formed into cylinder of size
36mm x 25mm dia. The equipment is workable on 220 volts 50 C/s
Dissolution Rate Test Equipment
-- do -- same as above but three stages.
Double Unit Organ Bath
A perspex organ bath with fine thermostatic temperature control,
electric stirrer and complete set of accessories, making it a
versatile unit for all research work. Bath 12"x9"x8", with leak
proof dovetailed joints, resting in sturdy metal frame; top of the
bath carries a 1"x3/8" thick band, for fixing accessories, inside
the bath is a metal sheathed heating element (easily replaceable)
controlled by means of a fine adjustable thermostat with
sensitivity Â±1Â°C. The stirrer unit is completely independent and
dips in the bath in one corner, fixing on its special stainless
steel upright. A M.S. junction box is fitted to the bath frame and
carries all the electrical leads and connections, two pilot lamps
indicate functioning of the thermostat and stirrer.
Standard components are
• Double set of glass inner vessels • Oxygen tubes • Warming
coils • Two stainless steel capillary levers • Four stainless steel
uprights with boss heads • X blocks
Analgesiometer (Eddy's Hot Plate)
Consisting of 30x30cms heating surface with perpex enclosure and
solid state temperature controller with micro-controller based
digital temperature indicator controller to set surface temp
between 30Â°C to 80Â°C.
Available in five models
1. Student Stimulators Transistorised : Out put 0-25 DC in two
steps, duration .5 ro 1.5ms frequency 5 to 100 c/s in 11 steps,
modes, single, repetitive or an external trigger, for 220V
2. Student Electronic Stimulator Latest Design : â€¢ Frequency
continuously variable from 0.1Hz to 100Hz in 3 decades of 0.1 to 1,
1 to 10 and 10 to 100 selectable through push-button controls and
one continuously variable control. â€¢ Output voltage continuously
variable from 0 to 30V in two steps of 1 to 3 and 1 to 30,
selectable through a switch. â€¢ Fixed pulse duration 1m sec â€¢
Single & external trig. single pulse facility â€¢ Sensitive
speaker to give audible indication or each output â€¢ High
stability new circuitry minimises external interference.
3. Stimulator General Purpose : Provides rectangular pulse of
controlled amptitude 0.1 - 100V. Frequency 0.1 - 1000 PPS &
width 0.01 to 100mm.
4. Research Stimulator With R.F. Isolation unit : Provides
rectangular pulse of controlled polarity, Amptitude 1.5mV to 150V,
frequency 0.1 to 10 KCS delay 10 micro sec to 1 sec & width 10
micro sec to 1 sec.
Friability Test Apparatus
Used to determine the durability and abrasivness of tablets. A
transparent perpex drum (made of imported perspex sheet 6.4 mm
thick) 300mm dia x 35mm deep and white cover disc and nut, also a
shaped radial fixed blade which carries the tablets along with it
up to the central height and lets them off while the drum is
rotating. Thus the tablets rub against each other without any hard
impact. The drum rotates at a fixed speed of 30 RPM by a geared
motor and the rotation period is controlled by a timer (imported
time switch duration 1 to 15 minutes) per determined end preset.
The motor unit is housed in a shaped steel cabinet with shaft
extended on one side upon which the drum rotates. Switches with
neon indicators and time switch are fitted on a panel and provided
work on 220 volts 50C/s AC . Digital models also available.
Friability Test Apparatus
-- do -- same as above but with double drum
Wooden with sunmica. basic unit with table, with F.R.P. wall
lining, flourscent light, complete with exhaust system, fume duct
Working Area : 2' x 2' x 2' , 3' x 2' x 2'
LALALALAMINAR AIRFLOW CABINETSMINAR AIRFLOW CABINETSMINAR
AIRFLOW CABINETSMINAR AIRFLOW CABINETS
VEETRON Laminar air flow cabinets are designed to
create a particle-free working environment. Air is taken
through a filtration system and then exhausted across a
work surface in a laminar or unidirectional air stream.
The filtration system compromises of a pre-filter and one
or more HEPA filters. The air within the laminar flow hood
is thus filtered of many particles creating a working zone
for many applications in the medical, electronic and
industrial sectors. In industry these are often called
Clean Benches as the air is effectively 'cleaned' by
VEETRON Laminar Air Flow Hood Products deliver a
higher level of product protection for work in progress.
VEETRON Laminar air flow cabinets offer More space and
a larger work area. Ergonomic Features provide more
flexibility, more comfort options and accessories to fit
VEETRON offers broad range of Laminar air flow cabinets
HORIZONTAL FLOW MODEL
VERTICAL FLOW MODEL
REVERSE LAMINAR FLOW BOOTH
VERTICAL CEILING MODEL
Vertical Laminar Flow Workstations
Horizontal Laminar Flow Workstations
Vertical Laminar Flow Workstations, Horizontal Laminar Flow
Workstations, HORIZONTAL LAMINAR FLOW, VERTICAL FLOW
MODEL, REVERSE LAMINAR FLOW BOOTH, VERTICAL CEILING MODEL
Tablet Hardness Tester Monsanto Type
A fairly handy instrument for taking quick readings for the
hardness of tablets. It is made of brass turned parts. Heavily
chrome plated the scale is 0 to 20KG. The index mark and division
is in reading . Scale is adjustable for zero setting as per size of
Tablet Hardness Tester Pfizer Type
Capacity 0 to 20Kg dial type, packed in niced polished wooden
Made of glass yarn with On/Off switch. available in following
• 50ml 60Watt • 100ml 60Watt • 250ml 150Watt • 500ml 200Watt • 1
Lit. 300Watt • 2 Lit. 450Watt • 3 Lit.450Watt • 5 Lit. 600Watt • 10
A compact histamine aerosol apparatus consisting of a clear
perspex exposition chamber divided in two sections and all glass
neubilizer and dial type sphygmomanometer for assay of
anti-histamines drug on guinea-pigs etc.
Hot Air Sterlizer (Oven)
Double walled suitably insulated temp. control 50Â°C to 250Â°C
Â±1Â°C by E.G.O. thermostat inner chamber aluminium / stainless
steel. Fitted with L shape thermometer. Available in Aluminium
& S,S, in various sizes.
Inner chamber size :
• 12" x 12" x 12"
• 14" x 14" x 14" • 16" x 16" x 16" • 18" x 18" x 18" • 24" x
18" x 18" • 24" x 24" x 24" • 36" x 24" x 18"
Round 20cm (8") dia single operated
• Complete with three step rotary switch, plug & cord • Same
as above with double plates of 8" dia • Hot plates rectangular
electrically operated complete with
3 step switch with cord and plug. • 300 x 250mm (12" x 10") •
400 x 250mm (16" x 10") • 450 x 300mm (18" x 12") • 600 x 180mm
(24" x 18")
Thermostatically controlled by thermostat ambient to 80Â°C with
a sensitivity Â±1Â°C. Beaded heating elements are placed in ribs at
bottom and sides. Double walled inside aluminium or stainless steel
and outside mild steel sheet painted with attractive enamel. Door
has double glass viewing, built in horizontal L-shape thermometer
with perforated adjustable shelves, two pilot lamps, ON/OFF switch.
To work on 220/230 volts
A.C. Inner Chamber size Aluminium & S.S.
• 300 x 300 x 300mm (12"x12"x12") • 350 x 350 x 350mm
(14"x14"x14") • 300 x 400 x 400mm (16" x 16" x 16")
I.R. Moisture Balance
A basic method for determination of moisture content, measure
percent by weighing and drying simultaneously. Infra red radiation
are reflected by a bulb and its temperature is controlled by a
The balance scale is divided in terms of moisture content on wet
Range 0 - 100 % Accuracy Â±0.2%
Dimension 28 x 35cm
Sample Weight 5gm, 10gm, 20gm, 25gm as required
A.C. Mains 220V 50Hz
Karl Fischer Apparatus for Moisture Content Determination
1. Microprocessor K.F. moisture titrator with built in magnetic
stirrer, auto computation of moisture in ppm, %age and mg H2O
storage of date, time, batch no. & final results of 20
titrations. K.F. reagent dispensing by motorised process. Final
results are flashed on 8 digit display. External printer attachment
2. Auto Karl Fischer Titrimeter (Deluxe Model) having seperate
control and stirring units with array of 10 LED, buzzer auto zero
burette, adjustable timer, dual platinum electrode and other
3. Auto Karl Fischer Titrimeter with seperate control and
stirrer unit auto zero burette, dual platinum electrode &
Mechanical Stirrer (laboratory Stirrer)
Fitted with speed regulator, height and space adjustable. 1/20
H.P. AC/DC motor.
Motor Driven Disintegrator
Laboratory Size, hammer type with H.P. heavy duty motor (single
phase) 220 volts, 50C/s A.C. consisting of four steel hammers fixed
to a disc of 3" in dia 1" thick through which passes a shaft being
revolved at 3000 RPM. The hammers are enclosed in a C.I. drum, the
sides and upper surface of which are roughened in a C.I. drum, the
sides and upper surface of which are roughned. The inner surface is
undulating. The lower part of drum is made of chrome plated brass
and is detachable so that SS sieves of different mesh size (a set
of three sieves of coarse, medium & fine) supplied with the
instrument can be easily placed. Hopper is made of die casted
aluminium, built on angle iron frame of size 24" x 14" x 20"
Operation Table Large Size
made entirely from stainless steel, in two halves slopping
towards the centre a small wedge over the whole length separates
the two halves, under the wedge provided a brass drain pipe.
Removable and replaceable by sliding IN or OUT blood and other
fluids flow towards the centre of the table, from where these drip
into the drain pipe and carried
through an end drain tube to the recepatable after operation the
whole top can be washed clean the drain pipe removed, cleared and
replaced the S.S. top is heated, a set of electric lamps placed to
effect balanced heat distribution dog holder with its SS upright
slide along slot in the top useful for fixing accessories. A S.S.
swing tray is fitted on a upright in one corner of the top useful
for placing dissecting instruments accessories etc. Steep pipe
frame handle and wheels for conscience in moving. Table top size
51" x 18" x 40" high.
Rat Operating Table (Tilting)
Pole Climbing Apparatus
New improved model built in solid state buzzer and stimulator to
provide electrical shocks of 400V in pulsating rates 0.2mA a
frequency of 5 per sec for a duration controlled manually or by
built in 30 second timer. Output available for recording on
Kymograph or polygraph complete to work on 220V AC.
Detachable polishing pan for use with tablet coating pan. Made
of mild steel painted and provided with inner lining of superior
canvas cloth, inner dia 12" x 8" high with opening of 7" dia neck
used for polishing tablets.
Box from fine plywood acrylic sheet front, top lid opening air
window, push system and neck holding clamp provided.
Sherrington Rotating Drum
Electrical E-8 Student Kymograph with special heavy duty motor,
oil lapped gear systems, speeds from 0.12 mm/sec to 640 mm/sec, in
8 steps, jerk free running, instantaneous start & stop clutch.
Stainless steel spindle with screw lift 15 x 15cm cylinder with
levelling screws, pilot lamp, plug & cord.
(Latest with digital counter) For determining neuro-pixicity,
muscle tone, balance and motor co-ordination in rats and mice.
Consisting of two or three or four compartments of 75mm width each
with a rotating rod of 25mm diameter having speeds of 5, 10, 15, 20
and 25 rpm with time interval counter in each compartments.
-- do -- Same as above but in Four Compartments.
-- do -- Same as above but in Five Compartments.
Sieve Shaker (Hand Operated)
Can accommodate up to 7 sieves of 8" dia during a train or gears
operated by a hand wheel. A heavy fly wheel ensured smooth
operation. Supplied without test sieves and lid receiver.
Student Organ Bath
A prespex organ bath with fine thermostatic temperature control.
Complete with accessories, bath size 8" x 4" x 5" with leak proof
dovetailed joints, fitted on sturdy metal frame.
1. Heater Mantle Type : Unit of three or six. Available in
2. Hot Plate Type : Tis heater is used to heat soxhlet flasks
and it consists of a mild steel housing. Unit of three or six.
Three or six hot plates of dia 4 1/2" are mounted on top of the
housing and can be operated by individual a) ON/OFF switch b)
Rotary switch c) Energy regulator as per requirements. Mild steel
housing has two rods with two adjustable cross rods on which the
glass apparatus can be fixed. Electrically operated on 220 / 230
volts AC mains with max. power rating of 900 watts. The
apparatus is supplied without glass parts.
Glass Parts : Complete with one flask and bulb condenser with
interchangeable joints. Different capacities.
6 litre capacity for vital capacity, or use as a gasometer with
chain compensated counter balance to the float balanced through cut
its movement. Pulley calibrated to denote volume inlet and outlet
tubes, side cock for gases, cock for draining off water strong
construction. Complete with corrugated tube mouth piece &
Tablet Triturate Moulds
With pegs and holes. Phenolic die cast with acrylic sheet with
set of holes and guide holes. 30 moulds set.
Use for Pyrogen testing 0 to 6 channel (Digital displpay
Temperature) with 6 probes.
-- do -- with single probe.
Sieves For Powder Shifting
Stainless Steel wire mesh size 10, 16, 22, 30, 44, 60, 80, 8"
dia mounted in a brass rim 2" high machine made and fit one above
-- do -- 100 and 120 No
Extra heavy duty for making tinctures, decotious infusion etc.
cap. 1 Lit. stainless steel disc, with screw drive, stainless steel
mesh as inner perforated vessel with stop cock.
Different sizes Tray Dryer are available as follows but without
trays. Chamber size in mm (WxDxH) approx tray capacity :-
• 430 x 840 x 650mm 8 Trays 16"x32"x1 1/4" size • 430 x 840 x
910mm 12 Trays -- do -- • 910 x 840 x 910mm 24 Trays -- do -- • 960
x 1270 x 1450mm 48 Trays -- do -- • 960 x 1700 x 1700mm 96 Trays --
VEETRON Bench top freeze dryers has been designed to suit a wide
drying applications in the laboratory environment. The freeze
dryers have been
especially designed for a multitude of applications and for
investigation & research in the fields of biotechnology and
clinical, pharmaceutical fields & scientific institutes.
The bench top freeze dryer is supplied fully assembled,
including the vacuum
and refrigerating system and all necessary elements, ready for
connecting to the utility services
Veetron lyophilyzer use the most up-to date technology in
refrigeration and control, giving unrivalled reliability and
reproducibility in the
freeze drying process. The Freeze-Dryer technology enables
novices alike to develop new cycles quickly, while also ensuring
that those cycles are elegant and efficient.
1.5 Litres, 3, 5 Litres
** Varying capacity options on Demand.
-40 °C;-60 °C;-80°C;-90°C
** Varying temperature options on Demand.
Safe and ergonomic design & versatility in use.
Maximum Cooling Performance & fastest possible drying
Evenly & Fully distributed ice condensation.
Compact equipment, with options of stoppering system
An extended choice of process and control options
A variety of manifolds for variety of needs
Manifolds & ports
Mobile Trolley to acommodate freeze dryer with all
Voltage Safety System
U.V. Inspection Cabinet Long Wave
1. U.V. Chromatography : Inspection cabinet for viewing and
detecting separated substances on T.L.C. layers fitted with long
wave (365nm) U.V. lamp for use on 220V A.C.
2. U.V. Chromatography : Inspection cabinet for viewing and
detecting separating substances on T.L.C. layers fitted with two
different wave length U.V. tubes for use on 220V A.C.
3. U.V. Inspection Cabinet (Short and Long Wave) Dual Wave :
Having imported filters fitted with separate low pressure mercury
vapour tubes for short U.V. (254nm) and long U.V. (365nm) plus
separate lamp for visible light, the low pressure mercury vapour
tubes in this model facilitate immediate use for inspection as you
4. Separate U.V. tube.
Vibration type, variable speed, neoprene cup impart vigorous
agitation to tubes, with touch ON/OFF switch.
Water Deionization Apparatus
The plant consists of one caution exchanger column containing
caution exchanger resin. One anion exchanger column containing
anion exchanger resin. Plant is mounted on M.S. stand with assembly
of valves and tubing. One conductivity meter with cell to monitor
the ionised solids of purified water and thus control the functions
of demineralization. The meter is direct reading having reading
heavy range 0.40 microns / cm.
• Cap. of flow rate 30 to 50 Lit/hr • Cap of flow rare 75 to 100
Lit / hr.
• Semi Automatic Y Shaped Maze for study of shock motivated
brightness discrimination responses in rats. With wire grill, cue
light, grill charge and rat presence indicators, adjustable shock
stimulus 0.1 to 1.0 mA. remote control unit permits easy handling
and operation of pre-programmed experimental procedure from
distance without touching or disturbing the animal.
• Automatic Y made : Same as above but with timer from 0 to
999.9 second to measure the latency time and also monitors the
movement of rat automatically.
Pure Water Distillation
Product range:1810D Pure water distillation instrument
1810D Automatic double pure water distillation instrument
Entirely-new box-type structure, and no need to move the glass
to open the cover. Made of pyre of high quality. Heating by fully
immersed quartz tube. Double distillations, and the water level is
automatically controlled. Sprayed with a coating of plastics, both
inside and outside surfaces of the box are corrosion-resisting.
Voltage power Output Dimensions
220V 2×1.5KW ＞1600ml/h 620×360×630(H)
CO 2 incubater
——Microprocessor control Co2 incubator is a key equipment for
immunology, oncology genetics and bio engineering. It is widely
applicable for research and production of microorganisms,
agricultural science and pharmacology.
1. Polished stainless-steel chamber, semicircular arcs at
corners for easy cleaning, and the space between the shelves in the
2. Microprocessor controller for temperature and humidity
ensures of precise and reliable control.
3. Independent temperature-limiting alarm system ensures
experiments run safely. (option)
4. Door temperature controller prevents dewfall on glass door of
5. Microorganism filter at inlet provides 100% filtrating
6. CO2 pressure releasing valve 7. UV light for periodic
sterilization of chamber
1. Humidity Display 2. Incubator sterilizer 3. Independent
Model HH.CP-T(8OL) HH.CP-01(16OL)
IR CO2 Sensor Imported
Electrical Requirements 220V 50HZ
Power Consumption 450W 720W 680W 950W
Heating Method Air-jacketed Water-jacketed
Temperature Range RT+~50℃ Display Resolution 0.1℃
Temperature Stability ±0.3℃
CO2 Range 0~20%(air-adjusting type) 0~20%IR sensor
CO2 Recovery ≤Calibration×1.2min Humidifying Method Natural
Ambient temperature +5~35℃
Chamber Volume 80L 160L 80L 160L
(mm)W×D×H 500×400×400 500×500×650 400×400×500 500×500×650
Exterior Dimension (W×D×H,
mm 760×530×560 770×630×810
Shelves 2(pcs) 3(pcs) 2(pcs) 3(pcs)
※ Specification test under no load