5-axis universal – machining center

Manufacture MATEC

Type 30 L 2000

Year of manufacture 2001

Control HEIDENHAIN – TNC 426

Machine number 341

Travels X - 2.000mm / Y - 600mm / Z - 800mm

Swivel head ± 110°

TECHNICAL DATA

MATEC 30 L

travels X – 2.000mm / Y – 600mm / Z – 800mm

spindle SK 40

drive power 20 kW

speed range 20-15.000 rpm

rapid traverse 30.000mm/min.

feed rate from 1-30.000mm/min.

control HEIDENHAIN – TNC 426

preparation for 5. axis rotary table/dividing attachment inclusive transistor actuator

electronic handwheel HEIDENHAIN

swivel head with 1 degree-division

smallest swivel angle 1 degree (serration)

tool magazine with 48 places

machine positionier size 2.500mm x 650mm

completly constructed with

AMF-accuracy-clamping plates

internal coolant supply 20 bar

Equipment of the machine for the use of tools (DIN 69871-SK 40 form B or VDI 40) with internal coolant

supply through the spindle and the tools.

paper band filter system (fineness 30 my)

- 2. coolant circulation (high-pressure pump 20 bar)

- tank capacity paper filtration system 450 l

2 oil mist extraction units for double-sided filtration and extraction of

oil-/emulsions mist

with a flash point not under 120 degree Celsius

electronic air cleaner IFEV 2000 D with motor and

blower

air performance ca. – 1800 m³/h

number of the cell unit 2 pieces

total power 200 watts

operating voltage 220 V 50/60 Hz

partation wall fort wo-place-system

working area-full enclosure with roof

completely enclosed working area The loading doors are designed so that a loading with a crane in the open state is possible at any time.

chip conveyor with integrated coolant system,

discharge height ca. 850 mm

(strap hinge, unpunched) up to X = 2.000 mm

central oil lubrication system

worspace lighting 2-fold

documentation

operating instructions