Embed Size (px)
Citation preview
Michael Thouless
Background Education 1984 Ph. D. (University of California, Berkeley) 1982 M. S. (University of California, Berkeley) 1981 B. A. 1st Class Honours (Cambridge University)
M. A. taken in June 1985 Professional Qualifications 2012 Chartered Engineer (UK) #596378
Positions University of Michigan 2015- Janine Johnson Weins Professor of Engineering 2014- Arthur F. Thurnau Professor 2000- Professor of Mechanical Engineering 2000- Professor of Materials Science & Engineering 1995-2000 Associate Professor of Mechanical Engineering & Applied Mechanics 1999-2000 Associate Professor of Materials Science & Engineering Administrative duties at UM 2019- Associate Chair, Department of Mechanical Engineering 2009-2010 SACUA Chair / Chair of Faculty Senate 2008-2009 SACUA vice-Chair / vice-Chair of Faculty Senate 1997-1999 Undergraduate Program Director (Mechanical Engineering)
Other permanent positions 1988-1994 Research Staff Member,
IBM Research Division, Yorktown Heights, NY 1985-1988 Assistant Research Engineer
Department of Materials Science, University of California, Santa Barbara, CA 1984-1985 Assistant Research Engineer
Department of Materials Science & Mineral Engineering, University of California, Berkeley, CA
Visiting Positions 9/17-7/18 Engineering Department, Cambridge University, Cambridge, UK
(Overseas Fellow, Churchill College) 6/13-7/13 Wind Energy Department, Danish Technical University, Risø, Denmark 6/14-7/14 Wind Energy Department, Danish Technical University, Risø, Denmark 1/11-8/11 Engineering Department, Cambridge University, Cambridge, UK
(Overseas Fellow, Churchill College) 7/10 Risø National Laboratory for Sustainable Energy, Risø, Denmark 7/02-12/02 Engineering Department, Cambridge University, Cambridge, UK
(Visiting scholar, Pembroke College) 6/95-7/95 Ford Research Laboratory, Ford Motor Company, Dearborn, MI 9/94-11/94 Dept. of Engineering Mechanics, Tsinghua University, Beijing, China
1 6/ix/19
7/85-8/85 Engineering Department, Cambridge University, Cambridge, UK Honors and Awards External 2017-18 Overseas Fellow, Churchill College, Cambridge University 2015 Archie Higdon Distinguished Educator Award (ASEE) 2013-2014 Otto Mønsted Guest Professorship, Danish Technical University (Denmark) 2012 Fellow, Institute of Materials, Minerals and Mining (UK) 2011 Overseas Fellow, Churchill College, Cambridge University 2009 Sc.D. (University of Cambridge) 2007 Fellow, ASME 2003 Listed as a “Highly-cited researcher” in materials science category by ISI 1997 NAE Frontiers of Engineering attendee 1996 CAREER Award, National Science Foundation 1990 R. F. Bunshah Award, American Vacuum Society (Metallurgical Division) Internal 2017 CoE "Ted Kennedy Family Faculty Team Excellence Award" 2015 Janine Johnson Weins Professor of Engineering 2014 Arthur F. Thurnau Professor 2013 CoE "Vulcans' Teaching Excellence Award" 2012 UM Distinguished Faculty Governance Award 2011 CoE "Trudy Huebner Service Excellence Award" 2010 ME Department Achievement Award 2009 ME ΠΤΣ Professor of the Term (Fall) 2005 ME Teaching Incentive Fund Award (ME382) 2005 ME ΠΤΣ Professor of the Term (Winter) 2004 CoE "David E. Liddle Research Excellence Award" 2002 ME Teaching Incentive Fund Award (ME382) 2001 ME Teaching Incentive Fund Award (ME395) 1997 MEAM ΠΤΣ Professor of the Term (Fall) 1997 MEAM Teaching Excellence Award 1979-81 Scholar, Churchill College, Cambridge University 1979-81 Scholar, Central Electricity Generating Board, UK 1978 Entrance Exhibition, Churchill College, Cambridge University
Research Publications (ISI: h = 43, citations = 6100, average = 39 cites/paper) 1. M. D. Thouless, C. H. Hsueh and A. G. Evans, “A Damage Model of Creep Crack Growth
in Poly-Crystals,” Acta Metall., 31, 1675-1687 (1983). 2. M. D. Thouless and A. G. Evans, “Nucleation of Cavities During Creep of Liquid-Phase
Sintered Materials,” J. Am. Ceram. Soc., 67, 721-727 (1984). 3. M. D. Thouless and A. G. Evans, “Some Considerations Regarding the Creep Crack
Growth Threshold,” Scripta Metall., 18, 1175-1180 (1984). 4. M. D. Thouless, “Spalling of Flat Plates by Thermal Shock,” J. Am. Ceram. Soc., 68,
C111-C112 (1985).
2 6/ix/19
5. A. G. Evans, M. D. Thouless, D. P. Johnson-Walls, E. Y. Luh and D. B. Marshall, “Some Structural Properties of Ceramic Matrix Fiber Composites,” Conf. Proc. Fifth Int. Conf. on Composite Materials ICCM-V, Eds. W. C. Harrigan, J. Strife and A. K. Dhingra, 543-553 (1985).
6. M. D. Thouless and A. G. Evans, “On Creep Rupture in Materials Containing an Amorphous Phase,” Acta Metall., 34, 23-31 (1986).
7. M. F. Ashby, A. C. Palmer, M. D. Thouless, D. J. Goodman, M. Howard, S. D. Hallam, S. A. F. Murrell, N. Jones, T. J. O. Sanderson and A. R. S. Ponter, “Nonsimultaneous Failure and Ice Loads on Arctic Structures,” Offshore Technology Conference, 399-402 (1986).
8. M. D. Thouless, “High Temperature Creep Crack Growth:-Models in Ceramics,” Vol. 9 of Reports in Materials Science, Parthenon Press, Kirby Lonsdale, U.K., (1986). (ISBN# 1-85070-118-0).
9. M. D. Thouless, A. G. Evans, M. F. Ashby and J. W. Hutchinson, “The Edge Cracking and Spalling of Brittle Plates,” Acta Metall., 35, 1333-1341 (1987).
10. M. D. Thouless, “A Review of Creep Rupture in Materials Containing an Amorphous Phase,” Res Mechanica, 22, 213-242 (1987).
11. A. G. Evans, M. Rühle, B. J. Dalgleish and M. D. Thouless, “On Prevalent Whisker Toughening Mechanisms in Ceramics,” MRS Symp. Proc., 78, 259-271 (1987).
12. M. D. Thouless and A. G. Evans, “Effects of Pull-Out on the Mechanical Properties of Ceramic-Matrix Composites," Acta Metall., 36, 517-522 (1988).
13. M. D. Thouless, “Bridging and Damage Zones in Crack Growth,” J. Am. Ceram. Soc., 71, 408-413 (1988).
14. M. S. Hu, M. D. Thouless and A. G. Evans, “The Decohesion of Thin Films from Brittle Substrates,” Acta Metall., 36, 1301-1307 (1988).
15. M. D. Thouless, B. J. Dalgleish and A. G. Evans, “Determining the Shape of Cylindrical Second Phases by Two-Dimensional Sectioning,” Mater. Sci. and Eng. A, 102, 57-68 (1988).
16. M. D. Drory, M. D. Thouless and A. G. Evans, “On the Decohesion of Residually-Stressed Thin Films,” Acta Metall., 36, 2019-2028 (1988).
17. H. C. Cao, M. D. Thouless and A. G. Evans, “Residual Stresses and Cracking in Brittle Solids Bonded with a Thin Ductile Layer,” Acta Metall., 36, 2037-2046 (1988).
18. M. D. Thouless, “Decohesion of Films with Axisymmetric Geometries,” Acta Metall., 36, 3131-3135 (1988).
19. M. D. Thouless, O. Sbaizero, E. Bischoff and E. Y. Luh, “The Influence of Heat Treatment upon Fiber Pull-Out in a Ceramic Composite,” MRS Symp. Proc., 120, 333-339 (1988).
20. M. D. Thouless, “The Role of Fracture Mechanics in Adhesion,” MRS Symp. Proc., 119, 51-62 (1988).
21. R. F. Cook, M. D. Thouless, D. R. Clarke and M. C. Kroll, “Stick-Slip during Fibre Pull-Out,” Scripta Metall., 23, 1725-1730 (1989).
22. M. D. Thouless, H. C. Cao and P. A. Mataga, “Delamination from Surface Cracks in Composite Materials,” J. Mater. Sci., 24, 1406-1412 (1989).
23. M. D. Thouless, O. Sbaizero, L. S. Sigl and A. G. Evans, “Effect of Interface Mechanical Properties on Pullout in a SiC-Fiber-Reinforced Lithium Aluminum Silicate Glass Ceramic,” J. Am. Ceram. Soc., 72, 525-532 (1989).
24. B. N. Cox, D. B. Marshall and M. D. Thouless, “Influence of Statistical Fiber Strength Distribution on Matrix Cracking in Fiber Composites,” Acta Metall., 37, 1933-1943 (1989).
3 6/ix/19
25. M. D. Thouless, “A Re-Examination of the Analysis of Toughening in Brittle-Matrix Composites,” Acta Metall., 37, 2297-2304 (1989).
26. M. D. Thouless, “Some Mechanics for the Adhesion of Thin Films,” Thin Solid Films, 181, 397-406 (1989).
27. M. D. Thouless, “Modelling Creep-Crack Processes in Ceramic Materials,” pp. 50-62 In The Mechanics of Creep Brittle Materials - 1, edited by A. R. S. Ponter and A. C. F. Cocks, Elsevier Applied Science, London, UK, (1989).
28. M. D. Thouless and A. G. Evans, “Comment on the Spalling and Edge-Cracking of Plates,” Scripta Metall. Mater., 24, 1507-1510 (1990).
29. M. D. Thouless and R. F. Cook, “Stress-Corrosion Cracking in Silicon,” Appl. Phys. Lett., 56, 1962-1964 (1990).
30. H. C. Cao and M. D. Thouless, “Tensile Tests of Ceramic-Matrix Composites: Theory and Experiment,” J. Am. Ceram. Soc., 73, 2091-2094 (1990).
31. M. D. Thouless, “Crack Spacing in Brittle Films on Elastic Substrates,” J. Am. Ceram. Soc., 73, 2144-2146 (1990).
32. M. D. Thouless, “Fracture of a Model Interface under Mixed-Mode Loading,” Acta Metall. Mater., 38, 1135-1140 (1990).
33. E. Olsson, A. Gupta, M. D. Thouless, A. Segmüller and D. R. Clarke, “Crack Formation in Epitaxial [110]-Films of YBa2Cu3O7-d and PrBa2Cu3O7-x on [110]-SrTiO3 Substrates,” Appl. Phys. Lett., 58, 1682-1684 (1991).
34. M. D. Thouless, “Cracking and Delamination of Coatings,” J. Vac. Sci. Technol., A9, 2510-2515 (1991).
35. J. W. Hutchinson, M. D. Thouless and E. G. Liniger, “Growth and Configurational Stability of Circular, Buckling-Driven Film Delaminations,” Acta Metall. Mater., 40, 295-308 (1992).
36. M. D. Thouless, “Fracture Resistance of an Adhesive Interface,” Scripta Metall. Mater., 26, 949-951 (1992).
37. M. D. Thouless, “Frictional Sliding and Pull-Out of a Fibre,” Scripta Metall. Mater., 27, 1211-1214 (1992). (Erratum: 27, 543 1993.)
38. M. D. Thouless, “Mixed-Mode Fracture of a Lubricated Interface,” Acta Metall. Mater., 40, 1281-1286 (1992).
39. M. D. Thouless, E. Olsson and A. Gupta, “Cracking of Brittle Films on an Elastic Substrate,” Acta Metall. Mater., 40, 1287-1292 (1992).
40. M. D. Thouless and H. M. Jensen, “Elastic Fracture Mechanics of the Peel-Test Geometry,” J. Adhesion, 38, 185-197 (1992).
41. M. D. Thouless, J. W. Hutchinson and E. G. Liniger, “Plane-Strain, Buckling-Driven Delamination of Thin Films: Model Experiments and Mode-II Fracture,” Acta Metall. Mater., 40, 2639-2649 (1992).
42. M. D. Thouless, “Combined Cracking and Buckling of Films,” J. Am. Ceram. Soc., 76, 2936-2938 (1993).
43. H. M. Jensen and M. D. Thouless, “Effects of Residual Stresses in the Blister Test,” Int. J. Solids Struct., 30, 779-795 (1993).
44. M. D. Thouless, “Effect of Surface Diffusion on the Creep of Thin Films and Sintered Arrays of Particles,” Acta Metall. Mater., 41, 1057-1064 (1993).
45. M. D. Thouless, J. Gupta and J. M. E. Harper, “Stress Development and Relaxation in Copper Films During Thermal Cycling,” J. Mater. Res., 8, 1845-1852 (1993).
46. M. D. Thouless and H. M. Jensen, “The Effect of Residual Stresses on Adhesion Measurements,” J. Adhes. Sci. Technol., 8, 579-586 (1994).
4 6/ix/19
47. M. D. Thouless, “Fracture Mechanics for Thin-Film Adhesion,” IBM J. Res. Dev., 38, 367-377 (1994).
48. M. D. Thouless, H. M. Jensen and E. G. Liniger, “Delamination from Edge Flaws,” Proc. Roy. Soc., A447, 271-279 (1994).
49. M. D. Thouless, “Residual Stresses in Thin Films,” Proc. 4th. International Conference on Residual Stresses, 1088-1096 (1994).
50. D. Chidambarrao, K. P. Rodbell, M. D. Thouless and P. W. Dehaven, “Line Width Dependence of Stress in Passivated Al Lines during Thermal Cycling,” MRS Symp. Proc., 338, 261-268 (1994).
51. M. D. Thouless and W. Liniger, “Effects of Surface and Boundary Diffusion on Void Growth,” Acta Metall. Mater., 43, 2493-2500 (1995).
52. M. D. Thouless, “Modeling the Development and Relaxation of Stresses in Films,” Annual Review of Materials Science, 25, 69-96 (1995).
53. H. M. Jensen and M. D. Thouless, “Buckling Instability of Straight Edge Cracks,” J. Appl. Mechs.,62, 620-625 (1995).
54. D. Kovar, G. A. Brady, M. D. Thouless and J. W. Halloran, “Interfacial Fracture between Boron Nitride and Silicon Nitride and its Applications to the Failure Behavior of Fibrous Monolithic Ceramics,” MRS Symp. Proc., 409, 243-248 (1996).
55. M. D. Thouless, H. Yu, Z. Zhao and W. Yang, “Damage Nucleation During Electromigration along an Isolated Boundary in an Elastic Medium,” J. Mechs. Phys. Solids, 44, 371-387 (1996).
56. M. D. Thouless, “Stress Evolution During Electromigration in a Bamboo Structure,” Scripta. Mater., 34, 1825-1831 (1996).
57. M. D. Thouless, K. P. Rodbell and C. Cabral, “Effect of a Surface Layer on the Stress Relaxation of Thin Films,” J. Vac. Sci. & Technol. A. 14, 2454-2461 (1996).
58. D. Kovar and M. D. Thouless, “A Simple Method for Determining Frictional Sliding Resistance and Frictional Energy Dissipation in Layered Ceramics,” J. Amer. Ceram. Soc., 80, 673-679 (1997).
59. D. Wong and M. D. Thouless, “Effects of Elastic Relaxation on Aspect Ratios During Island Growth of Isotropic Films,” J. Mater. Sci., 32, 1835-1840 (1997).
60. M. D. Thouless, M. S. Kafkalidis, S. M. Ward and Y. Bankowski, “Toughness of Plastically-Deforming Asymmetric Joints,” Scripta Mater., 37, 1081-1087 (1997).
61. M. D. Thouless, “Modeling Stress Evolution in Electromigration,” MRS Symp. Proc., 474, 305-315 (1997).
62. M. D. Thouless, M. S. Kafkalidis, J. L. Adams, S. M. Ward, R. A. Dickie and G. L. Westerbeek, “Determining the Toughness of Adhesives in Plastically-Deforming Joints,” J. Mater. Sci. 33, 189-197 (1998).
63. D. Kovar, M. D. Thouless and J. W. Halloran, “Crack Deflection and Propagation in Layered Silicon Nitride / Boron Nitride Ceramics,” J. Amer. Ceram. Soc. 81, 1004-1012 (1998).
64. M. E. Nichols, C. A. Darr, C. A. Smith, M. D. Thouless and E. R. Fischer, “Fracture Energy of Automotive Clearcoats: I - Experimental Methods and Mechanics,” Polymer Stability and Degradation, 60, 291-299 (1998).
65. M. D. Thouless, “An Analysis of Spalling in the Microscratch Test,” Eng. Fract. Mechs., 61, 75-81 (1998).
66. H. Ji, G. S. Was and M. D. Thouless, “Measurement of the Niobium/Sapphire Interface Toughness via Delamination,” Eng. Fract. Mechs., 61, 163-171 (1998).
5 6/ix/19
67. W. C. Chiu, M. D. Thouless and W. J. Endres, “An Analysis of Chipping in Brittle Materials,” Int. J. Fract., 90, 287-298 (1998).
68. J. Du, P. C. Niven, M. D. Thouless and A. F. Yee, "Rate Dependence of the Fracture Behavior in a Rubber-Modified Epoxy", Polymeric Materials Science and Engineering, 79, 198-199 (1998).
69. H. Ji, G. S. Was and M. D. Thouless, “Determination of the Fracture Toughness of the Niobium/Sapphire Interface,” MRS Symp Proc., 522, 325-338 (1998).
70. J. Du, M. D. Thouless and A. F. Yee, “Development of a Process Zone in Rubber-Modified Epoxy Polymers,” Int. J. Fract., 92, 271-286 (1998).
71. Q. D. Yang, M. D. Thouless and S. M. Ward, “Numerical Simulations of Adhesively-Bonded Beams Failing with Extensive Plastic Deformation,” J. Mech. Phys. Solids, 47, 1337-1353 (1999).
72. Q. D Yang and M. D. Thouless, “Reply to ‘Comments on “Determining the Toughness of Plastically Deforming Joints,’” J. Mat. Sci. Lett., 18, 2051-2053 (1999).
73. M. D. Thouless, J. Du and A. F. Yee, “Mechanics of Toughening Brittle Polymers,” pp. 71-85 in Toughening of Plastics, ACS symposium series 759B, edited by R. A. Pearson, H.-J. Sue and A. F. Yee (2000).
74. A. F. Yee, J. Du and M. D. Thouless, “Toughening of Epoxies,” Chapter 26 (pages 225-267) in Polymer Blends - Volume 2: Performance, edited by D. Paul and C. B. Bucknall, published by John Wiley & Sons (2000).
75. Q. D. Yang, M. D. Thouless, and S. M. Ward, “Analysis of the Symmetrical 900-Peel Test with Extensive Plastic Deformation,” J. Adhesion, 72, 115-132 (2000).
76. M. S. Kafkalidis, M. D. Thouless, Q. D. Yang and S. M. Ward, “Deformation and Fracture of an Adhesive Layer Constrained by Plastically-deforming Adherends,” J. Adhes. Sci. Technol., 14, 1593-1607 (2000).
77. J. Du, M. D. Thouless and A. F. Yee, “Effects of Rate on Crack Growth in a Rubber-Modified Epoxy,” Acta Mater., 48, 3581-3592 (2000).
78. W. C. Chiu, W. J. Endres and M. D. Thouless, “An Experimental Study of Chip Formation and Surface Formation during Orthogonal Machining of Homogeneous Brittle Materials,” Mach. Sci. and Tech., 4, 253-275 (2000).
79. Q. D. Yang, M. D. Thouless and S. M. Ward “Elastic-Plastic Mode-II Fracture of Adhesive Joints,” Int. J. Solids Struct., 38, 3251-3262 (2001).
80. M. N. Cavalli and M. D. Thouless, “The Effect of Damage Nucleation on the Toughness of an Adhesive Joint,” J. Adhesion, 76, 75-92 (2001).
81. Q. D. Yang and M. D. Thouless, “Mixed-mode fracture analyses of plastically-deforming adhesive joints,” Int. J. Fract., 110, 175-187 (2001).
82. G. Tryggvason, M. Thouless, D. Dutta, S. L. Ceccio, and D. M. Tilbury. “The New Mechanical Engineering Curriculum at the University of Michigan,” J. Eng. Education, 90, 437-444 (2001).
83. W. C. Chiu, W. J. Endres and M. D. Thouless, “An Analysis of Surface Cracking during Orthogonal Machining of Glass,” Machining Science and Technology, 5, 195-215 (2001).
84. M. D. Thouless and Q. D. Yang, “Measurement and Analysis of the Fracture Properties of Adhesive Joints,” Chapter 7 (pp. 235-271) of The Mechanics of Adhesion, Vol. I of Adhesion Science and Engineering, edited by A. Pocius and D. Dillard. Published by Elsevier (2002).
85. M. S. Kafkalidis and M. D. Thouless, “The Effects of Geometry and Material Properties on the Fracture of Single Lap-Shear Joints,” Int. J. Solids and Structs., 39, 4367-4383 (2002).
6 6/ix/19
86. S. Li, J. Wang and M. D. Thouless, “The Effects of Shear on Delamination of Beam-Like Geometries,” J. Mech. Phys. Solids, 52, 193-214 (2004).
87. K. T. Turner, M. D. Thouless and S. M. Spearing, "Mechanics of Wafer Bonding: Effect of Clamping," Journal of Applied Physics, 95, 349-355 (2004).
88. M. N. Cavalli, M. D. Thouless and Q. D. Yang, “Cohesive-Zone Modeling of the Deformation and Fracture of Weld-bonded Joints,” Welding Journal, 83, 133S-139S (2004).
89. S. Li, M. D. Thouless, A. M. Waas, J. A. Schroeder, and P. D. Zavattieri, "Use of Mode-I Cohesive-Zone Models to Describe the Fracture of an Adhesively-bonded Polymer-Matrix Composite," Journal of Composites Science & Technology, 65, 281-293 (2005).
90. S. Li, M. D. Thouless, A. M. Waas, J. A. Schroeder, and P. D. Zavattieri, "Use of a Cohesive-Zone Model to Analyze the Fracture of a Fiber-Reinforced Polymer-Matrix Composite," Journal of Composites Science & Technology, 65, 537-549 (2005).
91. Xiaoyue Zhu, Kristen L. Mills, Portia R. Peters, Joong Hwan Bahng, Elizabeth Ho Liu, Jeongsup Shim, Keiji Naruse, Marie E. Csete, M. D. Thouless, and Shuichi Takayama, "Fabrication of Reconfigurable Protein Matrices by Cracking," Nature Materials, 4, 403-405 (2005). (Cover image)
92. M. N. Cavalli, M. D. Thouless and Q. D. Yang, "Cohesive-Zone Modeling of the Deformation and Fracture of Spot-Welded Joints," Fatigue and Fracture of Engineering Materials and Structures, 28, 861-874 (2005).
93. B. Zhou, M. D. Thouless, and S. M. Ward, “Determining Mode-I Cohesive Parameters for Nugget Fracture in Ultrasonic Spot Welds,” International Journal of Fracture, 136, 309-326 (2005).
94. S. Li, M. D. Thouless, A. M. Waas, J. A. Schroeder, and P. D. Zavattieri, “Mixed-mode Cohesive-zone Models for Fracture of an Adhesively-bonded Polymer-matrix Composite,” Engineering Fracture Mechanics, 73, 64-78 (2006).
95. J. P. Parmigiani and M. D. Thouless, “The Roles of Toughness and Cohesive Strength on Crack Deflection,” Journal of the Mechanics and Physics of Solids, 54, 266-287 (2006).
96. S. Li, M. D. Thouless, A. M. Waas, J. A. Schroeder, and P. D. Zavattieri, “Competing Failure Mechanisms in Mixed-mode Fracture of an Adhesively-bonded Polymer-matrix Composite,” Int. J. Adhesion & Adhesives, 26, 609-616 (2006).
97. B. Zhou, M. D. Thouless, and S. M. Ward, “Predicting the Failure of Ultrasonic Spot Welds by Pull-out from Sheet Metal,” International Journal of Solids and Structures, 43, 7482-7500 (2006).
98. K. L. Mills, X. Zhu, D. Lee, S. Takayama, and M.D. Thouless, “Properties of the Surface-modified Layer of Plasma-oxidized Poly(dimethylsiloxane),” in Mechanics of Nanoscale Materials and Devices, edited by A. Misra, J.P. Sullivan, H. Huang, K. Lu, S. Asif, Mater. Res. Soc. Symp. Proc. 924E, Warrendale, PA, Z07-08 (2006).
99. J. P. Parmigiani and M. D. Thouless, "The Effects of Cohesive Strength and Toughness on Mixed-mode Delamination of Beam-Like Geometries," Engineering Fracture Mechanics, 74, 2675-2699 (2007).
100. D. Huh, K. L. Mills, M. D. Thouless and S. Takayama, "Tunable Elastomeric Nanochannels for Nanofluidic Manipulation," Nature Materials, 6, 424-428 (2007).
101. M. D. Thouless and J. P. Parmigiani, "Mixed-mode Cohesive-zone Models for Delamination and Deflection in Composites," p.93-111 in Proceedings of the 28th Risø International Symposium on Material Science: Interface Design of Polymer matrix Composites; edited by B. F. Sørensen, L. P. Mikkelsen, H. Lilhot, S. Goutianos, and F. S. Abdul-Mahdi, (Roskilde, Denmark, September 2007).
7 6/ix/19
102. K. L. Mills, X. Zhu, S. Takayama and M. D. Thouless, "The Mechanical Properties of a Surface-Modified Layer on Poly(dimethylsiloxane)," Journal of Materials Research, 23, 37-48 (2008).
103. M. D. Thouless and Q. D. Yang, "A Parametric Study of the Peel Test," invited paper in International Journal of Adhesion and Adhesives, 28, 176-184 (2008).
104. Donghee Lee, N. Triantafyllidis, J. R. Barber and M. D. Thouless, "Surface Instability of an Elastic Half Space with Material Properties Varying with Depth," Journal of Mechanics and Physics of Solids, 56, 858-868 (2008).
105. C. Sun, M. D. Thouless, A. M. Waas, J. A. Schroeder and P. D. Zavattieri, "Ductile-Brittle Transitions in the Fracture of Plastically-Deforming, Adhesively-Bonded Structures: I Experimental Studies," International Journal of Solids and Structures, 45, 3059-3073 (2008).
106. C. Sun, M. D. Thouless, A. M. Waas, J. A. Schroeder and P. D. Zavattieri, " Ductile-Brittle Transitions in the Fracture of Plastically-Deforming, Adhesively-Bonded Structures: II Numerical Studies," International Journal of Solids and Structures, 45, 4725-4738 (2008).
107. C. Sun, M. D. Thouless, A. M. Waas, J. A. Schroeder and P. D. Zavattieri, "Rate Effects for Mixed-Mode Fracture of Plastically Deforming, Adhesively-Bonded Structures," International Journal of Adhesion and Adhesives, 29, 434-443 (2009).
108. Tomoyuki Uchida, K.L. Mills, Chuan-Hsien Kuo, Whijae Roh, Yi-Chung Tung, Amanda L. Garner, Kazunori Koide, M.D. Thouless, and Shuichi Takayama, "External compression-induced fracture patterning on the surface of poly(dimethylsiloxane) cubes and microspheres," Langmuir, 25, 3102-3107 (2009).
109. M. D. Thouless, "The Effect of Transverse Shear on the Delamination of Edge-Notch Flexure and 3-Point Geometries," Journal of Composites B, 40, 305-312 (2009).
110. C. Sun, M. D. Thouless, A. M. Waas, J. Schroeder and P. D. Zavattieri, "Rate Effects in Mode-II Fracture of Plastically Deforming, Adhesively-Bonded Structures," International Journal of Fracture, 156, 111-128
111. Donghee Lee, J. R. Barber and M. D. Thouless, Indentation of an Elastic "Half Space with Material Properties Varying with Depth," International Journal of Engineering Science, 47, 1274-1283 (2009).
112. R. R. Collino, B. B. Dick, F. Naab, Y. Q. Wang, M. D. Thouless and R. S. Goldman,
"Blister Formation in Ion-Implanted GaAs: Role of Diffusivity," Applied Physics Letters, 95, 111912 (2009).
113. K. J. Loh, M. D. Thouless and J. P. Lynch, “Enhancing the Mechanical and Fracture Properties of Nanocomposites Using Carbon Nanotubes,” Proceedings of the 12th International Conference on Fracture, Ottawa, Canada (July 2009).
114. K. L. Mills, Dongeun Huh, Shuichi Takayama and M. D. Thouless, "Instantaneous fabrication of arrays of normally closed, adjustable, and reversible nanochannels by tunnel cracking," Lab on a Chip, 10, 1627-1630 (2010).
115. Joel P. McDonald, M. D. Thouless, and Steven M. Yalisove, "Mechanics analysis of femtosecond laser induced blisters produced in thermally-grown oxide on Si(100)," Journal of Materials Research, 25, 1087-1095 (2010). (Cover image)
116. J. E. Olberding, M. D. Thouless, E. M. Arruda and K. Garikipati, "The non-equilibrium thermodynamics and kinetics of focal adhesion dynamics," PLoS ONE 5(8): e12043 (2010)
117. J. E. Olberding, M. D. Thouless, E. M. Arruda and K. Garikipati, "A Theoretical Study of the Thermodynamics and Kinetics of Focal Adhesion Dynamics," K. Garikipati and E.M. Arruda (eds.), IUTAM Symposium on Cellular, Molecular and Tissue Mechanics, IUTAM Book Series 16, 181-192, Springer Science & Business Media B .V. (2010).
8 6/ix/19
118. N. J. Douville, Z. Li, S. Takayama and M.D. Thouless, "Fracture of Metal Coated Elastomers," Soft Matter, 7, 6493-6500 (2011).
119. M. D. Thouless, Z. Li, N. J. Douville and S. Takayama, "Periodic Cracking of Films Supported on Compliant Substrates," Journal of the Mechanics and Physics of Solids, 59, 1927-1937 (2011).
120. R. R. Collino, A. W. Wood, N. M. Estrada, B. B. Dick, H. W. Ro, C. L. Soles, Y. Q. Wang, M. D. Thouless, R. S. Goldman, "Formation and Transfer of GaAsN Nanostructure Layers," Journal of Vacuum Science and Technology, A29, 060601.1-6 (2011).
121. Ming Yang, Keqin Cao, Lang Sui, Ying Qi, Jian Zhu, Anthony Waas, Ellen M. Arruda, John Kieffer, M. D. Thouless, and Nicholas A. Kotov, "Dispersions of Aramid Nanofibers: A New Nanoscale Building Block," ACS Nano, 5, 6945–6954 (2011).
122. R.B. Sills and M.D. Thouless "Fracture length scales in delamination of composite materials," p. 457-464, in Proceedings of the 32nd Risø International Symposium on Materials Science: Composite materials for structural performance: towards higher limits; edited by S. Fæster, D. Juul Jensen, B. Ralph and B. F. Sørensen, (Roskilde, Denmark, September 2011).
123. Toshiki Matsuoka, Byoung Choul Kim, Jiexi Huang, Nicholas Joseph Douville, M.D. Thouless, and Shuichi Takayama, "Nanoscale Squeezing in Elastomeric Nanochannels for Single Chromatin Linearization," Nanoletters, 12, 6480-6484 (2012).
124. H. Wang, Z. Hu, W. Lu and M. D. Thouless, “A Mechanism-Based Framework for the Numerical Analysis of Creep in Zircaloy-4,” Journal of Nuclear Materials, 433, 188-198 (2013).
125. Keqin Cao, Carlos Pons Siepermann, Ming Yang, Anthony M. Waas, Nicholas A. Kotov, M. D. Thouless, and Ellen M. Arruda, “Reactive Aramid Nanostructures as High-Performance Polymeric Building Blocks for Advanced Composites,” Advanced Functional Materials, 23, 2072-2080 (2013).
126. J. M. Mazzara, M. A. Balagna, M. D. Thouless and S. P. Schwendeman, “Healing Kinetics of Microneedle-formed Pores in PLGA Films,” Journal of Controlled Release, 171, 172-177 (2013).
127. R. B. Sills and M. D. Thouless, “The Effect of Cohesive-Law Parameters on Mixed-Mode Fracture,” Engineering Fracture Mechanics, 109, 353-368 (2013).
128. Byoung Choul Kim, Toshiki Matsuoka, Christopher Moraes, Jiexi Huang, M. D. Thouless and Shuichi Takayama, “Guided Fracture of Films on Soft Substrates to Create Micro/nano-feature Arrays with Controlled Periodicity,” Scientific Reports, 3, 3027 (2013).
129. M. D. Thouless, "Cohesive-Zone Modeling of Adhesive Joints," pages 249-255 in Mechanics Down Under, Proceedings of the 22nd Congress of Applied and Theoretical Mechanics, edited by J. P. Denier and M. D. Finn, Springer (2013).
130. Jiexi Huang, Byoung Choul Kim, Shuichi Takayama and M. D. Thouless "The Control of Crack Arrays in Thin Films," Journal of Materials Science, 49, 255-268 (2014). (Best paper finalist)
131. G. Liu, M. D. Thouless, V. S. Deshpande and N. A. Fleck, "Collapse of a Composite Beam made from Ultra High Molecular-weight Polyethylene Fibres," Journal of the Mechanics and Physics of Solids, 63, 320-335 (2014).
132. Byoung Choul Kim, Christopher Moraes, Jiexi Huang, M. D. Thouless and Shuichi Takayama, "Fracture-based Micro- and Nanofabrication for Biological Applications," Biomaterials Science, 2, 288-296 (2014)
133. Angela R. Dixon, Christopher Moraes, Marie E. Csete, M. D. Thouless, Martin A. Philbert, Shuichi Takayama, " One-dimensional Patterning of Cells in Silicone Wells via
9 6/ix/19
Compression-induced Fracture," Journal of Biomedical Research A, 102, 1361-1369 (2014).
134. Christopher Moraes, Byoung Choul Kim, Xiaoyue Zhu, Kristen L. Mills, Angela R. Dixon, M. D. Thouless, and Shuichi Takayama, "Defined Topologically-Complex Protein Matrices to manipulate Cell Shape via Three-Dimensional Fiber-Like Patterns," Lab on a Chip, 14, 2191-2201 (2014).
135. Byoung Choul Kim, Christopher Moraes, Jiexi Huang, Toshiki Matsuoka, M. D. Thouless, and Shuichi Takayama, "Fracture-Based Fabrication of Normally-Closed, Adjustable and Fully Reversible Micro-scale Fluidic Channels," Small, 10, 4020-4029 (2014).
136. R. B. Sills and M. D. Thouless, "Cohesive-Length Scales for Damage and Toughening Mechanisms," International Journal of Solids and Structures 55, 32-43 (2015).
137. Byoung Choul Kim, Priyan Weerappuli, M. D. Thouless, and Shuichi Takayama, "Fracture Fabrication of a Multi-scale, Channel Device that Efficiently Captures and Linearizes DNA from Dilute Solutions," Lab on a Chip, 15, 1329-1334 (2015).
138. Z. Hu, W. Lu, M. D. Thouless and J. R. Barber, "Simulation of Wear Evolution Using Fictitious Eigenstrains," Tribology International, 82, 191-194 (2015).
139. J. Huang, J. M. Mazzara, S. P. Schwendeman and M. D. Thouless, "Self-healing of Pores in PLGAs", Journal of Controlled Release, 206, 20-29 (2015).
140. Ming Yang, Keqin Cao, Bongjun Yeom, M. D. Thouless, Anthony Waas, Ellen M. Arruda and Nicholas A. Kotov, Aramid-Nanofiber-Reinforced Transparent Nanocomposites," Journal of Composites, 49(15), 1873-1879 (2015).
141. Z. Hu, W. Lu and M. D. Thouless, "Slip and Wear at a Corner with Coulomb Friction and an Interfacial Strength," Wear, 338-339, 242–251 (2015).
142. Fanbo Meng, Jiexi Huang and M. D. Thouless, "The Collapse and Expansion of Liquid-filled Elastic Channels and Cracks," Journal of Applied Mechanics, 82, 101009/1-11 (2015).
143. Tanaz Rahimzadeh, Ellen M. Arruda, M.D. Thouless, "Design of Armor for Protection against Blast and Impact," Journal of the Mechanics and Physics of Solids, 85, 98–111 (2015).
144. C. M. Seubert, M. E. Nichols, J. Frey, M. Shtein and M.D. Thouless, "The Characterization and Effects of Microstructure on the Appearance of Platelet-Polymer Composite Coatings," Journal of Materials Science, 51, 2259-2273 (2016).
145. Z. Hu, W. Lu and M. D. Thouless and J. R. Barber, "Effect of Plastic Deformation on the Evolution of Wear and Local Stress Fields in Fretting," International Journal of Solids & Structures, 82, 1–8 (2016).
146. H. Wang, W. Lu, J. R. Barber and M. D. Thouless, "The Roles of Cohesive Strength and Toughness for Crack Growth in Visco-elastic and Creeping Materials," Engineering Fracture Mechanics, 160, 226-237 (2016).
147. Z. Hu, W. Lu, M. D. Thouless, "Effects of Gap Size and Excitation Frequency on the Vibrational Behavior and Wear Rate of Fuel Rods," Nuclear Engineering and Design, 308, 261–268 (2016).
148. W. Lu, M.D. Thouless, Z. Hu, H. Wang, R. Ghelichi, C. H. Wu, K. Kamrin, D. Parks, "CASL Structural Mechanics Modeling of Grid-to-Rod Fretting (GTRF)," Journal of Materials, 68, 2922-2929 (2016).
149. J. B. Jørgensen, M. D. Thouless, B. F. Sørensen and C Kildegaard, "Determination of Mode-I Cohesive Strength for Interfaces," 37th Risø International Symposium on Materials Science, IOP Conference Series: Materials Science and Engineering, 139, 01205 (2016).
10 6/ix/19
150. M Han, B. C. Kim, T. Matsuoka, M. D. Thouless and S. Takayama, "Dynamic Simulations show Repeated Narrowing Maximizes DNA Linearization in Elastomeric Nanochannels," Biomicrofluidics, 10, 064108 (2016). (Best paper finalist)
151. H. Wang, Z. Hu, W. Lu and M. D. Thouless, "The Effect of Coupled Wear and Creep During Grid-to-Rod Fretting" Nuclear Engineering and Design, 318, 163-173 (2017).
152. Sasha Cai Lesher-Perez, Ge-Ah Kim, Chuan-hsien Kuo, Brendan M. Leung, Sanda Mong, Taisuke Kojima, Christopher Moraes, M. D. Thouless, Gary D. Luker, Shuichi Takayama, "Dispersible Oxygen Microsensors map Oxygen Gradients in Three-Dimensional Cell Cultures," Biomaterials Science, 5, 2106-2113 (2017).
153. M. D. Thouless, "Slow and Steady: The Effects of Teaching a One-Semester Introductory Mechanics Class over a Year," International Journal of Engineering Education, 33, 1842-1855 (2017).
154. Fanbo Meng, J. L. David, S. Bollin, M. E. Nicholsand M. D. Thouless, "Kinetics of
Channeling Cracks in Polymeric Coatings," International Journal of Solids and Structures, 132-133, 105-113 (2018).
155. C. M. Seubert, M. E. Nichols, C. Kappauf, K. Ellwood, M. Shtein and M. D. Thouless, "A Hybrid Ray-Wave Optics Model to Study the Scattering Behavior of Silver Metallic Paint Systems," Journal of Coatings Technology and Research, 15, 471-480, (2018).
156. M. D. Thouless, "Shear Forces, Root Rotations, Phase Angles and Delamination of Layered Materials," Engineering Fracture Mechanics, 191, 153-167 (2018).
157. Zupan Hu, Hai Wang, M. D. Thouless and Wei Lu, "An Approach of Adaptive Effective Cycles to Couple Fretting Wear and Creep in Finite-Element Modeling," International Journal of Solids and Structures, 139-140, 302-311 (2018).
158. Junki Joe, M. D. Thouless and J. R. Barber, "Effect of Roughness on the Adhesive Tractions between Contacting Bodies," Journal of the Mechanics and Physics of Solids, 118, 365-373 (2018).
159. K, Hong, J. R. Barber M. D. Thouless and W. Lu, "Cracking and Spalling of the Oxide Layer developed in High-Burnup Zircaloy-4 Cladding under Normal Operating Conditions in a PWR," Journal of Nuclear Materials, 512, 46-55 (2018).
160. J. M. Gorman and M. D. Thouless, "The Use of Digital-Image Correlation to Investigate the Cohesive Zone in a Double-Cantilever Beam, with Comparisons to Numerical and Analytical Models," Journal of the Mechanics and Physics of Solids, 123, 315-331 (2019).
161. K, Hong, M. D. Thouless, W. Lu and J. R. Barber, "Asymptotic Stress Fields for Complete Contact between Dissimilar Materials," Journal of Applied Mechanics, 86, 011009/1-6 (2019).
162. William S. LePage, Yuxin Chen, Eric Kazyak, Kuan-Hung Chen, Adrian J. Sanchez, Andrea Poli, Ellen M. Arruda, M. D. Thouless, and Neil P. Dasgupta, "Lithium Mechanics: Critical Roles of Strain Rate and Temperature and Implications for Lithium Metal Batteries," Journal of The Electrochemical Society, 162, A89-A97 (2019).
163. Dandan Wang, J. R. Barber, W. Lu and M. D. Thouless, "Use of Wavelet Analysis for an Objective Evaluation of the Formation of Pills in Nonwoven Fabrics," Journal of Industrial Textiles (in press).
164. Kevin Golovin, Abhishek Dhyani, M. D. Thouless and Anish Tujeta, "Low-Interfacial Toughness Materials for Effective Large-Scale Deicing," Science, 364, 371-375 (2019).
165. Kisik Hong, Wei Lu, M. D. Thouless and J. R. Barber, "Corner Stress fields in Sliding at High Friction Coefficients," European Journal of Mechanics A, 76, 308-311(2019).
11 6/ix/19
166. I. Gupta, J. R. Barber, M. D. Thouless and W. Lu, "Mechanistic Model for Stresses in the Oxide Layer formed on Zirconium Alloys," Journal of Thermal Stresses, 42, 1071-1082 (2019).
167. Dandan Wang, M. D. Thouless, Wei Lu and J. R. Barber, "In-situ Observations of Abrasion Mechanisms of Nonwoven Fabric," Wear, 432-433, 202945 (2019).
168. F. Van Loock, M. D. Thouless and N. A. Fleck, "Tensile Fracture of an Adhesive Joint: The Role of Crack Length and of Material Mismatch," Journal of the Mechanics and Physics of Solids, 130, 330-348 (2019).
169. Kisik Hong, J. R. Barber, M. D. Thouless and Wei Lu, "Cracking of Cr-Coated Accident-Tolerant Fuel during Normal Operation and under Power-Ramping Conditions," Nuclear Engineering and Design (in press).
170. Fanbo Meng and M.D. Thouless, "Cohesive-zone analyses with stochastic effects, illustrated by an example of kinetic crack growth," Journal of the Mechanics and Physics of Solids (in press).
Patents 1. Shuichi Takayama, Michael David Thouless, Dongeun Huh, Kristen L. Mills and Nicholas
Joseph Douville, "Tunable Elastomeric Nanochannels for Nanofluidic Manipulation," US 8,945,909 B2 (Issued: February 3, 2015)
2. Michael Thouless, Ellen M Arruda, Tanaz Rahimzadeh, Anthony M Waas, "Blast/Impact Frequency Tuning and Mitigation," US 9,958,238 (Issued: May 1, 2018).
3. Michael Thouless, Ellen M Arruda, Tanaz Rahimzadeh, Levon Cimonian, Marie Rice, "Blast/Impact Frequency Tuning and Mitigation," US 10,041,767 (Issued: August 7, 2018).
4. Michael Thouless, Ellen M Arruda, Tanaz Rahimzadeh, Levon Cimonian, Marie Rice, "Blast/Impact Frequency Tuning and Mitigation," US 10,094,641 (Issued: October 9, 2018).
5. Michael Thouless, Ellen M Arruda, Tanaz Rahimzadeh, Anthony M Waas, "Blast/Impact Frequency Tuning and Mitigation," US 10,101,129 (Issued: October 16, 2018).
6. Michael Thouless, Ellen M Arruda, Tanaz Rahimzadeh, Anthony M Waas, "Blast/Impact Frequency Tuning and Mitigation," JP 6426180 (Issued: November 2, 2018).
7. Nicholas A. Kotov, Kevin Cao, Michael D. Thouless, Ellen M.Arruda, Anthony M. Waas, Carlos A. PonsSiepermann, Ryan M. Anderson, "Synthesis and Use of Aramid Nanofibers," US 10,160,833 B2 (Issued: December 25, 2018).
8. Michael Thouless, Ellen M Arruda, Tanaz Rahimzadeh, Anthony M Waas, "Blast/Impact Frequency Tuning and Mitigation," EP3069098 B1 (Issued: January 19, 2019).
Invited talks 1. M. D. Thouless, "Strength, toughness and length scales for interfacial fracture," Plenary
Lecture, The 16th Pan American Congress of Applied Mechanics (PACAM-XVI), Ann Arbor, MI, May 19-23, 2019.
2. M. D. Thouless, "Cohesive-Length Scales and Mixed-Mode Fracture," invited talk, symposium to honor Norman Fleck, European Solid Mechanics Conference (ESMC), Bologna, Italy, July 2-6, 2018.*
3. M. D. Thouless, "Cohesive-length scales and fracture," Keynote Lecture, 41st Annual Meeting of the Adhesion Society, San Diego, CA (Feb 25-March 1, 2018).
4. "Fracture of coatings in polymer systems" Coatings Science International (COSI-2017), Noordwijk, The Netherlands, (26th – 30th June 2017)
5. "Digital-image correlation and cohesive zones in mixed-mode fracture" Keynote lecture in Mixed-Mode Fracture Symposium at ICF14, Rhodes, Greece, (June 18-23, 2017).
12 6/ix/19
6. "Mechanics of interfaces and the role of length scales on fracture," A workshop for High-Fidelity Simulation-Based Virtual Testing of Composite Materials and Structures, Coral Gables, FL (April 19-20, 2016).
7. "Modelling the properties of adhesive joints to achieve reliable safety and strength simulations," Lightweight Materials - Modeling, Simulations & Crash Safety Congress, Troy, MI (January 26, 2016).
8. "Fracture of layered materials for fabrication of nano-scale devices," Proctor and Gamble Symposium, Cincinnati, OH (October 8, 2015)
9. "The mechanics of interfaces: the roles of interfacial toughness and strength" Midwest Mechanics of Materials Workshop, UIUC, IL (August 26, 2015).
10. "Fracture-length scales and mixed-mode delamination," Computational and experimental mechanics of advanced materials, KAUST, Saudi Arabia (July 1-3, 2013).
11. "Applications and mechanics for the cracking of films on compliant substrates," ICF-13, Beijing, China (June 17-21, 2013).
12. "Roles of cohesive length scales for intrinsic and extrinsic toughening, " ICF-13, Beijing, China (June 17-21, 2013).
13. "The influence of cohesive-zone parameters and traction-separation laws on mixed-mode fracture," ICM11, Lake Como, Italy, (June 6-9, 2011).
14. "The effects of shear and cohesive zones on mixed-mode fracture," Plenary lecture at Adhesion Society, Daytona Beach, FL (February 2010).
15. "Cracking of surface layers on compliant materials" ASME annual meeting, Orlando, FL (Nov 2009).
16. "Cohesive-zone modeling of adhesive joints," Introductory lecture International Congress on Theoretical and Applied Mechanics, Adelaide, Australia (August 2008).
17. "Mechanical properties and instabilities of PDMS surfaces" American Chemical Society annual meeting, New Orleans, LA (April 2008).
18. "Ductile-brittle transitions during the fracture of plastically-deforming adhesively-bonded joints," American Chemical Society annual meeting, New Orleans, LA (April 2008).
19. "Brittle-tough transitions during crack growth in toughened adhesives," American Physical Society annual meeting, New Orleans, LA (March 2008).
20. "Effects of Strength and Toughness on Delamination and Crack Deflection at Interfaces," MTS'07, Detroit, MI (September 2007).
21. "Interfacial fracture, adhesion & adhesives - identification and modelling of cohesive laws," International Symposium at Risø on design of the fibre/matrix interface in composite materials (September 2007).
22. “Delamination and fracture of thin films’ Overview talk at Mechanical Behaviour of Systems at Small Length Scales, Bangalore, India (January 2004).
23. “Fracture and Deformation of Adhesive Joints”, Gordon Research Conference - Adhesion, Tilden, NH (August 2000).
24. “Prediction of the Strength of Plastically-Deforming Adhesive Joints,” 2nd International Symposium on Adhesive Joints: Formation, Characteristics and Testing, Newark, NJ (May 2000).
25. “Effects of Plasticity in Measuring Adhesion,” Engineering Foundation Conference on Mechanical Properties of Films, Coatings and Interfacial Composites: Il Ciocco, Italy (June 1999).
26. “Mechanics of Toughening Brittle Polymers”, National Meeting of the American Chemical Society, Boston, MA (August 1998).
13 6/ix/19
27. “Fracture of Adhesives and Paints,” Gordon Research Conference - Mechanics of Thin Films (the inaugural GRC on this topic), Plymouth, NH (June 1998).
28. “Modeling Stress Evolution in Electromigration,” Materials Research Society - Spring Meeting: San Francisco, CA (April 1997).
29. “Interfacial Fracture of Laminated Materials,” China-U.S. Young Investigators Workshop On Emerging Trends in Mechanics and Processing of Advanced Materials: Beijing, China (August 1996).
30. “Interfacial Fracture and Adhesion” Institute for Mechanics and Materials - Critical Issues in Materials and Mechanics: Seattle, WA (October 1996).
31. “Mechanisms of Deformation in Thin Films on Substrates,” Engineering Foundation Conference on Mechanics and Physics of Layered and Graded Materials: Davos, Switzerland (August 1995).
32. The Fourth International Conference on Residual Stresses: “Residual Stresses in Thin Films,” (plenary lecture) Baltimore, MD (June 1994).
33. “Fracture Mechanics for Thin-Film Adhesion,” American Vacuum Society - Arizona Chapter Annual Symposium: Phoenix, AZ (May 1994).
34. “Fracture Mechanics of Thin-Film Ceramics for Solid-Oxide Fuel Cells” Institute for Mechanics and Materials - Symposium on Material-Science Issues relating to High-Temperature Fuel Cells: San Diego, CA (March 1994).
35. “Effect of Surface Diffusion on the Creep of Thin Films and Sintered Arrays of Particles,” American Ceramic Society - Annual Meeting: Cincinnati, OH (April 1993).
36. “Stress Modeling of Thin Films,” Materials Research Society - Spring Meeting: San Francisco, CA (April 1993).
37. “Fracture of Thin Films,” American Physical Society - Annual Meeting: Indianapolis, IN (March 1992).
38. “Model Experiments on Interfacial Fracture and Delamination of Thin Films,” Gordon Research Conference - Adhesion: New Hampton, NH (August 1992).
39. “The Effect of Residual Stresses on Adhesion Measurements,” International Symposium on Adhesion Measurement of Films and Coatings: Boston, MA (December 1992).
40. “Cracking and Delamination of Coatings,” American Vacuum Society- New Mexico Chapter Annual Symposium: Albuquerque, NM (April 1991).
41. “Fracture in Interfaces,” U.S. National Congress on Applied Mechanics: Tucson, AZ (May 1990).
42. Model Studies of Interfacial Failure,” Gordon Research Conference - Solid-State Studies in Ceramics: “Meriden, NH (August 1990).
43. “Cracking and Delamination of Coatings,” American Vacuum Society - Annual meeting: Toronto, Canada (October 1990).
44. “Some Mechanics for the Adhesion of Thin Films,” International Conference on Metallurgical Coatings: San Diego, CA (April 1989).
45. “The Role of Fracture Mechanics in Adhesion,” Materials Research Society - Spring Meeting: Reno, NV (April 1988).
46. Discussion Leader: Gordon Research Conference - Mechanics of Thin Films (Waterville, ME, (July 2002).
47. NSF Workshop on Adhesion, Lake Tahoe, CA (October 1987). Contributed talks Approximately 80
14 6/ix/19
Seminars 2019 Dow Chemical Company, (Midland, MI) 2017 CUED, University of Cambridge - Micromechanics seminar (Cambridge, UK)
CUED, University of Cambridge - Dynamics seminar (Cambridge, UK) 2016 University of Michigan (Ann Arbor, MI) 2014 EPFL Lausanne (Switzerland) 2011 University of Sheffield (UK); University of Cambridge (UK) 2010 Oregon State University (Corvallis, OR); Danish Technical University (Risø, Denamrk) 2009 University of Texas (Austin, TX) 2008 Saab Automotive (Tröllhaten, Sweden); Skövde University (Sweden); Dow Automotive
(Auburn Hills, MI) 2006 University of Cambridge (UK); University of Oxford (UK) 2002 University of Cambridge (UK); Danish Technical University (Lyngby, Denmark);
Imperial College (UK) 2000 General Motors (Warren, MI) 1999 University of Michigan (Ann Arbor, MI) 1997 University of Michigan (Ann Arbor, MI); General Motors (Warren, MI) 1996 DuPont (Wilmington, DE) 1995 University of Iowa (Iowa City, IA) 1994 Qinghua University (Beijing, China) 1993 Michigan Technological University (Houghton, MI); Ohio State University (Columbus,
OH); California Institute of Technology (Pasadena, CA); Stanford University (Palo Alto, CA); Brown University (Providence, RI); Columbia University (New York, NY): National Institute of Standards & Technology (Gaithersburg, MD); Loughborough University of Technology (UK)
1992 John Hopkins University (Baltimore, MD); 1991 Max Planck Institut (Stuttgart, Germany) 1990 University of Massachusetts (Amherst, MA); Case Western Reserve University
(Cleveland, OH); McMaster University (Hamilton, ON); IBM (Yorktown Heights, NY) 1988 ICI (Runcorn, England) 1987 IBM (Yorktown Heights, NY); Massachusetts Institute of Technology (Cambridge,
MA); University of Washington (Seattle, WA) 1986 Cornell University (Ithaca, NY); Northwestern University (Evanston, IL); National
Bureau of Standards (Gaithersburg, MD); 1985 Harvard University (Cambridge, MA); Cambridge University (UK)
Teaching PhD Students (chaired or co-chaired) ● W-C. Chiu (1999) - Teaching in Taiwan ● J, Du (1999) - Patent attorney in MN ● Q. Yang (2000) - Assoc. Prof. University of Miami ● M. S. Kafkalidis (2002) - Engineering at Boeing Corp ● M. N. Cavalli (2003) - Professor at U N Dakota (former Chair of ME, and Assoc. Dean) ● S. Li (2004) - Manager at Intel in China ● J. P. Parmigiani (2006) - Assoc. Research Prof, Oregon State University ● C. Sun (2007) - Engineer with General Electric ● D. Lee (2008) - Software Developer, ANSYS
15 6/ix/19
● K. L. Mills (2008) - Assistant Professor, MANE, Rensselaer Polytechnic Institute ● R. R. Collino (2010) - Post doc, UCSB ● K. Cao (2013) - Engineer at Intel, OR ● J. Huang (2014) - Engineer at Bosch, CA ● T. Rahimzadeh (2016), Engineer, General Motors, MI ● Z. Hu (2016) - Engineer ● C. M. Seubert (2016) - Researcher, Ford, MI ● H. Wang (2017) - Engineer - Apple ● J. M. Gorman (2019) - Researcher - US Army Tank Automotive Command
Classes taught ME382 Mechanical Behavior of Materials Required undergraduate class developed by me, replacing ME281 F2018 (76); F2015 (98); W2015 (81); W2014 (65); W2013 (32); W2012 (37); F2008 (74); F2007
(74); W2007 (44); W2006 (49); W2005 (37); F2001 (68); W2001 (88); W2000 (77); W2000 (55) ME 281 Mechanical Properties of Materials Previous required class F1998 (27); F1996 (71); W1996 (42); W1995 (46) ME211 Introduction to Solid Mechanics Required undergraduate class W 2016 (50); F2014 (98); F2013 (105); F2011 (77); W2008 (64); W2002 (98); W1999 (36); ME499 Introduction to Solid Mechanics An experimental version of ME211 taught over two semesters W2017 (15); F2016 (18); W2016 (24); F2015 (25) ME395 Junior Laboratory Required undergraduate laboratory co-developed by me, replacing ME396 W2019 (172); F2012 (109); W2009 (139); F2006 (90); F2004 (78); F2003 (77); W2003 (121);
F2000 (101) ME396 Mechanical Sciences Laboratory Previous version of the required undergraduate laboratory F1997 (103); F1996 (66); W1996 (44) ME516/MSE516 Mechanical Properties of Thin Films and Layered Materials A graduate class on fracture developed by me on my research interests F2016 (15); F2012 (21); F2009 (22); W2008 (12); F2005 (19); F2003 (24); F2000 (14) ME586: F1997 (17) ME599: F1995 (17) ME577 Materials in Manufacturing and Design A graduate class on materials selection developed by me F2018 (15); F2014 (17); W2012 (21); W2009 (21); F2006 (18); W2004 (13); F2001 (37); ME557: F1999 (33); F1998 (48) Short Courses and Workshops ● ME211 “Introduction to Solid Mechanics,” Shanghai Jiaotong University, Shanghai, China,
May-June 2001 (62). ● Short course on “Fracture Mechanics and Adhesion,” Eastman Kodak Company, Rochester,
NY, October 1997 (≈40)
16 6/ix/19
● Lecture on “Thin Film Mechanics, ” 5th Summer School of the Institute for Mechanics and Materials, Washington, DC, August 1997, (25)
● Lecture on “Application of Fracture Mechanics for Coating and Adhesive Fracture” Short Course on “Coating and Adhesive Adhesion: Theory, Application & Durability,” Organized by Inst. of Matls. Science at SUNY New Paltz, Orlando, FL, May 1997, (25)
● Informal graduate course on “Mechanical Properties of Films” Tsinghua University, Beijing, China, September 1994 - November 1994, (≈20 graduate students and professors)
Service
Service at University of Michigan University ● CRLT Faculty Advisory Board (2013-2015) ● Advisory Board on Intercollegiate Athletics (ex officio) (2009-2010) ● Athletics Performance Committee (ex officio) (2009-2010) ● Provost's Faculty Budget Advisory Committee (2008-2010) ● General Counsel's Advisory Committee (2008-2009) ● Development Advisory Committee (2007-2008) ● Research Policies Committee (2007-2008) ● Senate Advisory Committee on University Affairs (2007-2010) ● Committee for President's Interdisciplinary Faculty Initiative (2008) ● Vice-Provost's task force on web evaluations (2006-2007) ● Senate Assembly (2004-2010) ● Academic Affairs Advisory Committee (2004-2007) ● Administrator Evaluation Committee (2004-2007) ● Faculty advisor to University of Michigan Fencing Club (1995-2014) ● Faculty Mentor in Peer Mentorship program (1995-1998) College of Engineering ● Ad-hoc committee for CoE-Cambridge collaboration (20017-2019) ● Nominating Committee (Chair) (2016-2017) ● Executive Committee (2013-2016) ● Materials Science Chair Search Advisory Committee (2012-2013) ● Library Advisory Committee (2012-2015) ● Promotion Committee for Prof. W. Lu (2012-2013) ● Promotion Committee for Prof. D. Brei (2011-2012) ● Materials Science Internal Review Committee (2009-2010) ● Promotion Committee for Prof. A. Kuo (chair) (2007-2008) ● Promotion Committee for Prof. R. S. Goldman. (2007) ● Mechanical Engineering Internal Review Committee (2006-2007) ● Promotion Committee for Prof. A. Kuo (chair) (2005-2006) ● Promotion Committee for Prof. E.M Arruda (2004-2005) ● Promotion Committee for Prof. X. Pan (2003-4) ● Re-appointment Committee for Prof. K. Garikapati (2002-2003) ● Minority Engineering Program Office Review Committee (1998) ● Curriculum 2000 advisory committee (1999) ● Re-appointment Committee for Prof. L. Lin (1998-1999)
17 6/ix/19
Rackham Graduate School ● Faculty Recognition Awards Committee (2019-2020) ● Executive Board for Rackham School of Graduate Studies (2000-2003) ● Ph.D. in Music Education sub-committee of Rackham (2003) ● Distributed learning sub-committee of Rackham (2001) ● Rackham Pre-doctoral Faculty Selection Committee (1997) Department of Mechanical Engineering ● Faculty Search Committee (Chair) (2018-2019) ● Faculty Search Committee (2016-2017) ● Graduate Program Committee (2011-2013) ● Advisory Committee (1999-2005; 2006-2009) ● ME395 course leader (2008-2010) ● Area Coordinator (Materials and Solid Mechanics) (2001-2008) ● ME382 course leader (2001-2008) ● Planning Committee (1997-1999) ● Undergraduate Committee (chair) (1997-1999) ● Graduate Committee (1996-1998) ● Curriculum Committee (1996-1997) ● Honors and Awards Committee (1995-1997; 2006) ● Faculty Search Committee (for design area) (1997) ● Faculty Search Committee (for fluids area) (1996-1997) Department of Materials Science & Engineering ● Undergraduate Committee (2000-2006) ● Departmental Seminar Series (W-2001) Service to government or professional organizations Editorial Editorial Board: Journal of Materials: Design and Applications (2011-2016) Associate Editor: Journal of the American Ceramic Society (1990-2006) Reviewer: Numerous journals in materials & mechanics
Governmental Reviewer of proposals for various US governmental agencies College of Reviewers for Canada Chairs Reviewer for NSERC proposals (Canada) Reviewer of ESPRC proposals (UK) Conferences International Advisory / Scientific Committees ● 2nd International Conference on Materials Design and Applications 2018 (MDA2018) Porto,
Portugal (5 July - 6 July 2018). ● 1st International Conference on Materials Design and Applications 2016 (MDA2016) Porto,
Portugal (30 June - 1 July 2016). ● International Conference of Fracture (13), Beijing, China (June 2013). ● International Conference on Wind Energy: Materials, Engineering and Policies, BITS
Hyderabad, India (Nov 2012).
18 6/ix/19
● International Workshop on Future Wind Blade Technologies, IIT Delhi, New Delhi, India (8th - 9th Oct 2012).
● 32nd Risø International Symposium on Materials Science, Risø, Denmark (Sept 2011).
Organizing Committees: ● Engineering Foundation Conference on Mechanical Properties of Films, Coatings and
Interfacial Composites: Il Ciocco, Italy (June 1999).
Symposium Organizer: ● "Tony Evans Memorial Symposium," ICF-13, Beijing, China (June 2013). ● "Cohesive-Zone Modeling," World Congress on Computational Mechanics (July 2006, Los
Angeles, CA). ● “Fracture, Fatigue and Mechanical Reliability,” American Ceramic Society, Annual Meeting
(April 1994, Indianapolis, IN). ● “Frictional Effects at Interfaces,” First Meeting of Pac-Rim Ceramic Societies (November
1993, Honolulu, HI).
Program Committees: ● Annual Meeting, American Vacuum Society - Thin Films Division (October 1992, Chicago,
IL). Committees for Professional Societies ● Selection Committee: 3M Award - Adhesion Society (2006). ● Executive Committee: AAUP University of Michigan chapter (2005-2009) ● Executive Board: Academic Freedom Fund Lecture (2006-2009)
Other Universities Opponent: doctor technices (a higher doctorate) defence at Technical University of
Denmark, Lyngby (November 2010) Fakultetsopponent: PhD defence at Chalmers University, Sweden (June 2008) External Examiner: PhD defence at Cambridge University, UK (March 2019)
PhD defence at Cambridge University, UK (March 2011) PhD defence at Eindhoven University of Technology, Netherlands (May 2011) PhD defence at Technical University of Denmark, Risø (October 2015)
External Review: Graduate Program, Department of Mechanical Engineering, University of Miami, FL (April 2017)
Reviewer for tenure / promotion cases at universities in the US, Canada, Singapore, Ireland, Saudi Arabia Other activities ● Invited presentation "The role of the faculty in the governance of UM" at the UM meeting
of Chinese University Presidents, (May 2012). ● Invited presentation "The role of the faculty in the governance of UM" at the UM meeting
of Chinese University Presidents, (May 2010). ● Invited participant at workshop on "An Investigation of the Locus of Peer Review for
Publication," Center for Studies in Higher Education (CSHE) at UC Berkeley (April 2010).
19 6/ix/19
● Invited participant at conference on “The changing mission of doctoral education in preparing the citizen scholar,” organized by UM Rackham Graduate School and Woodrow Wilson National Fellowship Foundation, (June 2002)
20 6/ix/19
