Upload
lekiet
View
225
Download
4
Embed Size (px)
Citation preview
Control Products Catalog CA08102001E—August 2010 www.eaton.com 1
484848484848484848484848484848484848484848484848484848484848
Operator Interface Products
ELC Graphics Panel
HMi Operator Interface
PanelMate Operator Interface
48.1 ELC Graphics Panels
Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Standards and Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Software and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Technical Data and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
48.2 HMi Operator Interface
Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Standards and Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Software and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Technical Data and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
48.3 PanelMate Operator Interface
Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
ePro PS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Standalone Touchscreen Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Canvas Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
PanelMate Power Pro LT1100, 1700, 3000 and 5000 . . . . . . . . . . . . . . . . . . . 34
PanelMate PC Pro Runtime Hardware Key . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Power Pro Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Legacy Products Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
2 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.1 Operator Interface Products
ELC Graphics Panels
ELC Graphics Panels ContentsDescription Page
ELC Graphics PanelsStandards and Certifications . . . . . . . . . . . . . . . . . . . . . 3
Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Technical Data and Specifications . . . . . . . . . . . . . . . . . 6
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
DrawingsOnline
An EatonGreen Solution
Product DescriptionELC Graphics Panels are simple to program and easily connect to ELC products. ELC graphics panels make modifying an application quick and easy and also connect to Eaton’s MVX drives, IQ Modbus® meters and many other devices. With more than 30 objects that can be placed anywhere on the display, these tough panels also communicate to other major controllers. These graphics panels have two serial ports that can be used simultaneously to communicate. Transfer applications to or from these graphics panels using the handy transfer module. Ten programmable functions keys provide easy-to-change pages, input numeric values, enter alpha-numeric passwords, set, reset and more. Create alarms, password protect, import bitmaps and use many different fonts.
FeaturesProtocols
Supported Protocols
And more...
Protocol
Eaton ELC
Eaton D50/D32LT, D320
Eaton MVX ASCII
Eaton MVX RTU
Modbus ASCII
Modbus RTU
Allen-Bradley DF1
Mitsubishi FX Series
Mitsubishi FX2N Series
Koyo K-Sequence
LG 200S
OMRON C-Series
Siemens S7-200 Series
ASCII Slave Mode
Control Products Catalog CA08102001E—August 2010 www.eaton.com 3
484848484848484848484848484848484848484848484848484848484848
48.1Operator Interface Products
ELC Graphics Panels
ELC Graphics Panel Features
Standards and Certifications ● UL 508● cUL (CSA C22.2 No. 14)● CE (Low Voltage Directive);
Class 1 Div 2 Groups A, B, C, D
● RoHS
Item ELC-GP02 ELC-GP04
Display screenScreen STN-LCD STN-LCD
Color Monochromatic Monochromatic
Backlight The backlight automatic turn off time is 1–99 minutes(0 = do not to turn off)(backlight life is 50 thousand hours at 25°C)
The backlight automatic turn off time is 1–99 minutes(0 = do not to turn off)(backlight life is 50 thousand hours at 25°C)
Resolution 160 x 32 pixels 128 x 64 pixels
Display range 72 mm (W) x 22 mm (H) 67 mm (W) x 32 mm (H)
Contrast adjustment 15-step contrast adjustment 10-step contrast adjustment
Language font ASCII: characters (including European fonts)Taiwan: (BIG 5 code) traditional Chinese character fontChina: (GB2324-80 code) simplified Chinese character font
ASCII: characters (including European fonts)Taiwan: (BIG 5 code) traditional Chinese character fontChina: (GB2324-80 code) simplified Chinese character font
Font size (ASCII) 5 x 8, 8 x 8, 8 x 12, 8 x 16 5 x 8, 8 x 8, 8 x 12, 8 x 16
ALARM indication LED 1. Power-on indication (flash three times)2. Flash for communication error or other alarm3. Special indication by user programming
1. Power-on indication (flash three times)2. Flash for communication error or other alarm3. Special indication by user programming
RS-232 LED (yellow) Flashes when communicating Flashes when communicating
RS-485 LED (green) Flashes when communicating Flashes when communicating
Program memory 256KB flash memory 256KB flash memory
External interfaceSerial communication port RS-232 (COM1) 9 PIN D-SUB male
Data length: 7 or 8 bitsStop bits: 1 or 2 bitsParity: None/Odd/EvenBaud rate: 4800 bps–115,200 bps
Data length: 7 or 8 bitsStop bits: 1 or 2 bitsParity: None/Odd/EvenBaud rate: 4800 bps–115,200 bps
Extension communication portRS-485 (COM2) 5-pin removal terminal(RS-485 or RS-422)
Data length: 7 or 8 bitsStop bits: 1 or 2 bitsParity: None/Odd/EvenBaud rate: 4800 bps–115,200 bps
Data length: 7 or 8 bitsStop bits: 1 or 2 bitsParity: None/Odd/EvenBaud rate: 4800 bps–115,200 bps
Extension slot The slot for program copy card The slot for program copy card
Power 24 Vdc input 24 Vdc input
4 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.1 Operator Interface Products
ELC Graphics Panels
Product Selection
Graphics Panels
Software and Accessories
ELCSoftGP Programming Software
System Requirements ● Operating Systems—Windows 2000, Windows XP
ELCSoftGP Programming Software configures all ELC graphic panels. With ELCSoftGP, applications can be created, edited, downloaded and uploaded. Move programs from one controller to a different one with ease.
ELCSoftGP Editing Environment
ELC-GPXFERMOD Program Transfer Module
The ELC-GPXFERMOD is a multifunction device that provides the ability to back up an application already loaded onto one of the ELC-GP units. It will store all system settings such as baud and ID, as well as passwords and the application itself. Once stored in the module, the application and settings can be transferred to another ELC-GP unit of the same model number.
ELC-GPXFERMOD
Description Catalog Number
Panels
160 x 32 pixels, 10 function keys, monochrome ELC-GP02
128 x 64 pixels, 10 function keys, monochrome ELC-GP04
Spare Parts Kit
Includes several power connectors, battery doors, gaskets, mounting clips, etc. ELC-GPSPKIT
ELC-GP04
Description Catalog Number
Programming software for GP units ELCSOFTGP
Description Catalog Number
Program transfer module ELC-GPXFERMOD
ELCSoftGP
ELC-GPXFERMOD
Control Products Catalog CA08102001E—August 2010 www.eaton.com 5
484848484848484848484848484848484848484848484848484848484848
48.1Operator Interface Products
ELC Graphics Panels
ELC-CBPCGP3 Cable
Use this cable to download or upload applications between a PC and the ELC-GP graphics panels. This cable can also be used to transfer a program from an ELC-GP to another ELC-GP.
Pin definition of 9 PIN D-SUB RS-232:
PC to ELC-GPxx Cable
Power Supplies
All ELC modules operate from 24 Vdc. These power supplies provide a convenient way to provide robust DC voltage.
ELC Power Supplies
Description Catalog Number
Cable, PC to ELC-GP, 9.8 ft (3m) ELC-CBPCGP3
Description Catalog Number
Power supply, 24 watt, 1 amp ELC-PS01
Power supply, 48 watt, 2 amp ELC-PS02
9 PIN D-SUB
ON PC (RS-232)
9 PIN D-SUB
ON ELC-GP02/04
PC COM Port9 PIN D-SUB Female
GP02/04 COM Port9 PIN D-SUB Female
Rx 2 3 TxTx 3 2 Rx
GND 5 5 GND
1
5
6
9
5
1
9
6
L
N
24V
0V
POWER
ELC-PS01
L
N
24V
0V
POWER
ELC-PS02
ELC-PS01
ELC-PS02
6 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.1 Operator Interface Products
ELC Graphics Panels
Technical Data and Specifications
ELC Graphics Panels
ELC Power Supply
Description Specification
Environmental
Transportation and storageTemperature –4° to 140°F (–20° to 60°C)
OperatingTemperature 32° to 122°F (0° to 50°C)
Humidity 20–90% RH (non-condensing)
Communication interface COM1: RS-232; COM2: RS-485/RS-422
Vibration 0.5 mm displacement, 10–55 Hz, X, Y, Z three directions and two hours for each direction
Impact 10G, 11 ms, from X, Y, Z three directions and three times for each direction
Weight 0.53 lbs (0.24 kg)
Cooling method Natural air cooling
Electrical/EMC Approvals
Electrostatic discharge immunity EN61000-4-2/1995
Radiated immunity EN61000-4-3/1995
Electrical fast transient EN61000-4-4/1995
Radiated emission CISPR22, Class A
Other Approvals
Waterproof class of front panel UL Type 4X outdoor rated
Item ELC-PS01 ELC-PS02
Dimensions W x H x Din inches (mm)
1.44 x 3.54 x 2.36(36.5 x 90 x 60)
2.17 x 3.54 x 2.36(55 x 90 x 60)
Input power 100–240 Vac 50/60 Hz 100–240 Vac 50/60 Hz
Output volts 24 Vdc 24 Vdc
Output current (A) 1A 2A
Watts 24 48
Control Products Catalog CA08102001E—August 2010 www.eaton.com 7
484848484848484848484848484848484848484848484848484848484848
48.1Operator Interface Products
ELC Graphics Panels
DimensionsApproximate Dimensions in Inches (mm)
ECL-GP04
3.82(97.0)
3.35(85.0)
1.20(30.5)
.14(3.5)
1.40(35.5)
3.35(85.0)
5.79(147.0)
ALARMRS-232RS-485
Up
Pg Up
Pg Dn
Down
Left
Esc
EnterF0F5
F1F6
F2F7
F3F8
F4F9Shift
Right
5.31(135.0)
5.31 ~ 5.37(135 ~ 136.5)
Cut-Out Dimensions
8 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.1 Operator Interface Products
ELC Graphics Panels
Approximate Dimensions in Inches (mm)
ECL-GP02
ELC-GPXFERMOD
3.82(97.0)
3.35(85.0)
1.20(30.5)
.14(3.5)
1.40(35.5)
3.35(85.0)
5.79(147.0)
ALARMRS-232RS-485
Up
Pg Up
Pg Dn
Down
Left
EscF0
0Right
5.31(135.0)
5.31 ~ 5.37(135 ~ 136.5)
Cut-Out Dimensions
F1
1F2
2F3
3F4
4
EnterF5
5F6
6F7
7F8
8 9F9
.78 (19.8)
2.00 (50.9)
.39 (10.0)
Control Products Catalog CA08102001E—August 2010 www.eaton.com 9
484848484848484848484848484848484848484848484848484848484848
48.2Operator Interface Products
HMi Operator Interface
HMi Operator Interface ContentsDescription Page
HMi Operator Interface Features
Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Standards and Certifications . . . . . . . . . . . . . . . . . . . . . . 10
Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Technical Data and Specifications . . . . . . . . . . . . . . . . . 14
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
DrawingsOnline
An EatonGreen Solution
Product DescriptionPositioned between the ELC graphics panels and the XV series of operator interfaces, HMi is the workhorse of the industry. The units feature touchscreen and function buttons to suit all environments and applications. They range in screen size and color to fit available space and application needs. All units offer RS-232, RS-485 and RS-422 communications. The 6, 8 and 10 inch units also offer Ethernet communication options.
Features● Analog touchscreen ● Auto-scale application from
10 to 4 inch● Screen saver ● Pop-up screens ● Animated graphics ● Conditional visibility● Clock synchronization ● Data archiving ● Multi-language ● Eight levels of security ● Embedded logic for use
with local I/O ● Ethernet Modbus TCP
communication drivers
● Ethernet, COMM port and USB upload/download
● USB ports for data storage ● Three serial ports ● Up to four simultaneous
protocols ● Math and logic functions ● Recipes ● Macro capability ● Alarm/event recording and
viewing ● Real-time and historical
trending ● On and off-line simulation
10 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.2 Operator Interface Products
HMi Operator Interface
Protocols
Supported Protocols
Standards and Certifications● CE● UL● cUL● C-Tick● RoHS
Manufacturer and Protocol
Allen-Bradley
MicroLogix
SLC 5
Cimon
BP Series Loader Protocol
CP Series Loader Protocol
XP Series Loader Protocol
Copley
Stepnet
Danfoss
VLT 2800 (FC Protocol)
Delta
Delta DVP PLC
Delta DVP EH/SA ES/EX/SS (V5.1)
Delta Controller ASCII
Delta Controller RTU
Delta DVP TCP/IP
Eaton
ELC Series Serial
ELC Series TCP/IP
GVX—RTU
GVX—ASCII
MVX—RTU
MVX—ASCII
NFX—RTU
NFX—ASCII
Eaton Controller ASCII
Eaton Controller RTU
EasyPLC 800/MFD (EasyCom)
Emerson
EC20 Series
Facon
FB Series
Manufacturer and Protocol
Festo
Festo PLC
FuFeng
APC
Fuji Electric
Frenic Inverter
GE Fanuc
Series 90 SNP
Hitachi
EH Series Procedure 1
EH Series Procedure 2
Hust
Hust CNC Controller
Hust CNC Controller v2
IDEC
Micro Smart
Jetter
JC Series
Nano Series
Keyence
KV/KZ Series
Koyo
DL/SU Series
K-Sequence
Lenze
LECOM-A/B Protocol
LG
Master-K 120S/200S
Glofa GM6 CNET
Master-K CNET
XGT CNET
LiYan
LYPLC EX
Manufacturer and Protocol
M2i
M2i Master
M2i Slave
Matsushita
FP Series
Mirle
FAMA SC
Mitsubishi
FX Series
FX2N
FX3U
FX Series Computer Link
A Series/J71UC24
A2A/A2AS/A2USH
A1SH/A3N/A2ASH CPU Port
Q Series CPU Port
Q Series Computer Link
J2s Series
MKS
BY125
CT150
MC700/720
Modbus
ASCII (Master)
984 RTU (Master)
RTU 2W (Master)
ASCII Hex Address (Master)
RTU Hex Address (Master)
ASCII nW (Master)
RTU nW (Master)
ASCII (Slave)
RTU (Slave)
TCP/IP
Manufacturer and Protocol
Moeller
PS3 Series
PS4 Series
NIKKI DENSO
NCS-FI/FS Series
Omron
C Series
CJ1 Series
TPM1A
Parker
Compax 3
SIEMENS
S7 200
S7 300 (with PC Adaptor)
S7 300 (without PC Adaptor)
Taian
TP02
Ti
Ti435
Vigor
M Series
VIPA
S7 300 (with PC Adaptor)
YOKOGAWA
ACE
Control Products Catalog CA08102001E—August 2010 www.eaton.com 11
484848484848484848484848484848484848484848484848484848484848
48.2Operator Interface Products
HMi Operator Interface
Product SelectionOrdering InformationFor blank bezel (Eaton logo removed), add suffix -B. Example: HMI04BU-B.
For blank bezel with function buttons, add suffix -BF. Example: HMI06CE-BF.
Contact factory for custom bezel.
HMi Products
Software and Accessories
HMisoft Programming Software
For use with the HMi series of touchscreens, this software supports all of the features of HMi models. This easy to use Windows based software can run on Windows 2000, XP, Vista, and Windows 7 with a minimum CPU of Pentium III 500 MHz, 256 MB RAM, 500 MB free hard disk space.
● Simulate an application on or off line
● Built in picture library● Create your own picture
library● Screen manager● Over 70 on-screen objects● Easy object setup● Monitor all states of
objects
● Macro editing● Scale application from
10 to 4 inches● Upload/download
applications over USB, serial, or Ethernet
● Store archived data, alarms, and events to USB
● Logic configuration for I/O expansion modules
● Ethernet communicationsHMi Editor
HMi Screen Management
Description Catalog Number
4 in blue mode touchscreen HMI04BU
4 in color TFT touchscreen HMI04CU
6 in blue mode with expansion slot HMI06BE
6 in gray scale mode with expansion slot HMI06GE
6 in color STN with expansion slot HMI06CE
6 in Color TFT touchscreen HMI06CU
8 in color TFT with expansion slot HMI08CE
10 in color TFT with expansion slot HMI10CE
HMI_
Description Catalog Number
HMi programming software HMISOFT
HMi Editor
12 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.2 Operator Interface Products
HMi Operator Interface
Ethernet Expansion Module
The HMIECENT expansion module adds 10/100 MB Modbus TCP communications when plugged into the expansion slot of a 6, 8 or 10 inch HMi unit. Upload and download programs and communicate to other Modbus TCP devices. No need to distinguish between patch or crossover cables because this module auto-detects and adjusts for proper operation.
Product Outline
HMIECENT
I/O Expansion Modules
The HMIEC0806 and HMIEC1612 are 14 and 28 discrete I/O expansion modules providing eight DC inputs and six relay outputs or 16 DC inputs and 12 relay outputs. These modules plug into the available expansion slot on the back of the HMi unit (not available on the four inch model). No need for a separate PLC controller with this built in unit. Combine operator interface and logic into a single platform—use HMISOFT to build both the ladder logic and OI program.
Product Outline
I/O Expansion Modules
HMIEC_
Description Catalog Number
Ethernet Modbus TCP expansion module HMIECENT
Nameplate
Connection Port for Extension ModuleConnection Port for Ethernet
Direct Mounting Hole
HMIECENT
Nameplate
Connection Port
Direct Mounting Hole
Input/Output Terminals
Input Unit Output UnitCatalog NumberPower Point Type Point Type
5 Vdc supplied by HMi 8 DC Type sink or source 6 Relay HMIEC0806
16 12 Relay HMIEC1612
Description Catalog Number
I/O expansion module, 8 in/6 out HMIEC0806
I/O expansion module, 16 in/12 out HMIEC1612
Control Products Catalog CA08102001E—August 2010 www.eaton.com 13
484848484848484848484848484848484848484848484848484848484848
48.2Operator Interface Products
HMi Operator Interface
Adapter Plate
Kits
Replacement Gaskets
Cable
Power Supply
Description Catalog Number
6 in HMi adapter plate for PM1000 APPM1HMI6
Description Catalog Number
8 in anti-glare overlay kit (5/kit) 17AGT
10 in anti-glare overlay kit (5/kit) 39AG
HMi spare parts kits (includes several power connectors, battery doors,gaskets, mounting clips, etc.)
HMI-SPKIT
Description Catalog Number
4 in HMi replacement gasket (2/kit) HMI04-GASKET
6 in HMi replacement gasket (2/kit) HMI06-GASKET
8 in HMi replacement gasket (2/kit) HMI08-GASKET
10 in HMi replacement gasket (2/kit) HMI10-GASKET
Description Catalog Number
1 meter cable to connect between the HMi and Eaton Logic Controller (ELC) ELC-CBPCELC1
Description Catalog Number
1 amp 24 Vdc power supply ELC-PS01
2 amp 24 Vdc power supply ELC-PS02
14 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.2 Operator Interface Products
HMi Operator Interface
Technical Data and Specifications
HMi Operator Interface
Notes� The half-life of backlight is defined as original luminance being reduced by 50% when the maximum driving current is supplied to HMi.
The life of LED backlight shown is an estimated value under 25°C normal temperature and humidity conditions.� Program memory is used for recipes.� USB Host port can provide up to 5V/500mA of power.� Use isolated power supply (not applicable for HMI08CE and HMI10CE).� The value of the power consumption indicates the electrical power consumed by HMi without peripheral devices.
In order to ensure the normal operation, it is recommended to use a power supply which the capacity is 1.5 to 2 times the value of the power consumption.
SpecificationDescription HMI04BU HMI04CU HMI06BE HMI06GE
Display type STN TFT LCD STN FSTNDisplay color 8 blues 65536 colors 8 blues 16 graysScreen pixels 320 x 240 pixels 320 x 240 pixels 320 x 240 pixels 320 x 240 pixelsNIT rating 100 cd/m2 300 cd/m2 130 cd/m2 130 cd/m2
LCD module LED backlight LED backlight CCFL backlight CCFL backlightBacklight life 10,000 hours half-life at 25°C � 30,000 hours half-life at 25°C � 50,000 hours half-life at 25°C � 50,000 hours half-life at 25°C �
Display size 3.8 in (78.8 x 59.6 mm) 3.5 in (70.1 x 52.6 mm) 5.7 in (118.2 x 89.4 mm) 5.7 in (118.2 x 89.4 mm)Operating system Real Time OS Real Time OS Real Time OS Real Time OSMCU 32-bit RISC micro-controller/206.4 MHzMemoryProgram 1M 3M 3M 3MHistory 120K 120K 360K 360KRecipe 64K � 64K � 128K 128KAlarm 4K 4K 16K 16KData registers
Volatile 64K 64K 64K 64KNon-volatile 1K 1K 1K 1K
Backup memory (bytes) 128K 128K 512K 512KExt. memorySM card — — ✓ ✓
USB disk — — ✓ ✓
Extension interface — — ✓ ✓
USB host/client 1 host � Ver 1.1/1 client Ver1.1 1 host � Ver 1.1/1 client Ver1.1 Client Ver1.1 Client Ver1.1Serial COM portCOM1 RS-232 RS-232 RS-232 RS-232COM2 RS-422/RS-485 RS-422/RS-485 RS-232/RS-422/RS-485 RS-232/RS-422/RS-485COM3 RS-232 RS-232 RS-232/RS-422/RS-485 RS-232/RS-422/RS-485
Function key 4 user defined keys + 1 system key 4 user defined keys + 1 system key 4 user defined keys + 1 system key 4 user defined keys + 1 system keyPerpetual calendar (RTC) Built-in Built-in Built-in Built-inCooling method Natural air circulation Natural air circulation Natural air circulation Natural air circulationEnclosure ratings IP65/NEMA 4X (indoor only) IP65/NEMA 4X (indoor only) IP65/NEMA 4X (indoor only) IP65/NEMA 4X (indoor only) Agency certifications CE/UL/cUL/C-Tick CE/UL/cUL/C-Tick CE/UL/cUL/C-Tick CE/UL/cUL/C-TickOperating voltage DC +24V (–10% to +15%) (use isolated power supply) �
Power consumption � 2.64W 3.36W 7.2W 7.2WOperating temp. 32° to 122°F (0° to 50°C) 32° to 122°F (0° to 50°C) 32° to 122°F (0° to 50°C) 32° to 122°F (0° to 50°C)Storage temp. –4° to 140°F (–20° to 60°C) –4° to 140°F (–20° to 60°C) –4° to 140°F (–20° to 60°C) –4° to 140°F (–20° to 60°C)Ambient humidity 10% to 90% RH (0° to 40°C), 10% to 55% RH (41° to 50°C) pollution degree 2Shock 30G at 11 ms 30G at 11 ms 30G at 11 ms 30G at 11 msVibration resistance IEC61131-2 compliant
5 Hz ≤ f < 9 Hz = continuous: 1.75 mm/occasional: 3.5 mm9 Hz ≤ f < 150 Hz = continuous: 0.5g/occasional: 1.0gX, Y, Z directions for 10 times
Backup battery 3V lithium battery CR2032 x 1/battery life: 5 yearsBackup battery life Three years or more at 25°C Three years or more at 25°C Three years or more at 25°C Three years or more at 25°CBuzzer Multitone frequency (2K to 4K Hz)/85dBDimensions(W) x (H) x (D) in inches (mm)
5.54 x 4.13 x 1.76 (140.8 x 104.8 x 44.8)
5.54 x 4.13 x 1.76 (140.8 x 104.8 x 44.8)
7.25 x 5.67 x 1.85 (184.1 x 144.1 x 47)
7.25 x 5.67 x 1.85 (184.1 x 144.1 x 47)
Panel cutout (W) x (H) in inches (mm)
4.68 x 3.65(118.8 x 92.8)
4.68 x 3.65(118.8 x 92.8)
6.79 x 5.21(172.4 x 132.4)
6.79 x 5.21(172.4 x 132.4)
Weight in lbs (kg) 0.69 (0.315) 0.62 (0.310) 1.69 (0.768) 1.69 (0.768)
Control Products Catalog CA08102001E—August 2010 www.eaton.com 15
484848484848484848484848484848484848484848484848484848484848
48.2Operator Interface Products
HMi Operator Interface
HMi Operator Interface, continued
Notes� The half-life of backlight is defined as original luminance being reduced by 50% when the maximum driving current is supplied to HMi.
The life of LED backlight shown is an estimated value under 25°C normal temperature and humidity conditions.� A total of 125K Bytes of memory is shared for History and Alarms.� USB Host port can provide up to 5V/500mA of power.� Use isolated power supply (not applicable for HMI08CE and HMI10CE).� The value of the power consumption indicates the electrical power consumed by HMi without peripheral devices.
In order to ensure the normal operation, it is recommended to use a power supply which the capacity is 1.5 to 2 times the value of the power consumption.
SpecificationDescription HMI06CE HMI06CU HMI08CE HMI10CE
Display type STN TFT LCD TFT LCD TFT LCDDisplay color 256 colors 65536 colors 65536 colors 65536 colorsScreen pixels 320 x 240 pixels 320 x 240 pixels 640 x 480 pixels 640 x 480 pixelsNIT rating 100 cd/m2 200 cd/m2 400 cd/m2 330 cd/m2
LCD module CCFL backlight LED backlight CCFL backlight 2CCFL backlightBacklight life 50,000 hours half-life at 25°C � 50,000 hours half-life at 25°C � 50,000 hours half-life at 25°C � 50,000 hours half-life at 25°C �
Display size 5.7 in (118.2 x 89.4 mm) 5.6 in (113.3 x 84.7 mm) 8 in (162.2 x 121.7 mm) 10.4 in (215.2 x 162.4 mm)Operating system Real Time OS Real Time OS Real Time OS Real Time OSMCU 32-bit RISC micro-controller/206.4 MHz 32-bit RISC micro-controller/266 MHz 32-bit RISC micro-controller/206.4 MHz 32-bit RISC micro-controller/206.4 MHzMemoryProgram 3M 7M 7M 7MHistory 360K 125K � 360K 360KRecipe 128K 128K 128K 128KAlarm 16K 125K � 16K 16KData registers
Volatile 64K 64K 64K 64KNon-volatile 1K 1K 1K 1K
Backup memory (bytes) 128K 128K 512K 512KExt. memorySM card ✓ ✓ ✓ ✓
USB disk — ✓ ✓ ✓
Extension interface ✓ — ✓ ✓
USB host/client 1 client Ver1.1 1 host � Ver 1.1/1 client Ver1.1 1 host � Ver 1.1/1 client Ver1.1 1 host � Ver 1.1/1 client Ver1.1Serial COM portCOM1 RS-232 RS-232 RS-232 RS-232COM2 RS-232/RS-422/RS-485 RS-232/RS-485 RS-232/RS-422/RS-485 RS-232/RS-422/RS-485COM3 RS-232/RS-422/RS-485 RS-422/RS-485 RS-232/RS-422/RS-485 RS-232/RS-422/RS-485
Function key 4 user defined keys + 1 system key N/A 6 user defined keys + 1 system key 7 user defined keys + 1 system keyPerpetual calendar (RTC) Built-in Built-in Built-in Built-inCooling method Natural air circulation Natural air circulation Natural air circulation Natural air circulationEnclosure ratings IP65/NEMA 4X (indoor only) IP65/NEMA 4X (indoor only) IP65/NEMA 4X (indoor only) IP65/NEMA 4X (indoor only) Agency certifications CE/UL/cUL/C-Tick CE/UL/cUL/C-Tick CE/UL/cUL/C-Tick CE/UL/cUL/C-TickOperating voltage DC +24V (–10% to +15%) (use isolated power supply) �
Power consumption � 7.2W 3.0W 14W 15WOperating temp. 32° to 122°F (0° to 50°C) 32° to 131°F (0° to 55°C) 32° to 122°F (0° to 50°C) 32° to 122°F (0° to 50°C)Storage temp. –4° to 140°F (–20° to 60°C) –4° to 140°F (–20° to 60°C) –4° to 140°F (–20° to 60°C) –4° to 140°F (–20° to 60°C)Ambient humidity 10% to 90% RH (0° to 40°C), 10% to 55% RH (41° to 50°C) pollution degree 2Shock 30G at 11 ms 30G at 11 ms 30G at 11 ms 30G at 11 msVibration resistance IEC61131-2 compliant
5 Hz ≤ f < 9 Hz = continuous: 1.75 mm/occasional: 3.5 mm9 Hz ≤ f < 150 Hz = continuous: 0.5g/occasional: 1.0gX, Y, Z directions for 10 times
Backup battery 3V lithium battery CR2032 x 1/battery life: 5 yearsBackup battery life 3 years or more at 25°C 3 years or more at 25°C 3 years or more at 25°C 3 years or more at 25°CBuzzer Multitone frequency (2K to 4K Hz)/85dBDimensions(W) x (H) x (D) in inches (mm)
7.25 x 5.67 x 1.85 (184.1 x 144.1 x 47)
7.25 x 5.67 x 1.85 (184.1 x 144.1 x 47)
9.57 x 7.01 x 2.06 (243.1 x 178.1 x 52.4)
11.70 x 8.74 x 2.01(297.1 x 222.1 x 51.1)
Panel cutout (W) x (H) in inches (mm)
6.79 x 5.21(172.4 x 132.4)
6.79 x 5.21(172.4 x 132.4)
9.11 x 6.55(231.4 x 166.4)
11.23 x 8.28(285.2 x 210.2)
Weight in lbs (kg) 1.69 (0.768) 1.48 (0.670) 2.52 (1.147) 3.79 (1.721)
16 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.2 Operator Interface Products
HMi Operator Interface
HMIEC0806/HMIEC1612
Note� M1000, M1001, M1002, M1003, M1020, M1021, M1022, M1067, M1068, and M1161 are the special auxiliary relays (special M).
Description Specification Remark
Control method Stored program, cyclic scan system —
I/O processing method Batch I/O (refresh) Immediate refresh command available only with I/O of the MPU
Execution speed Basic command (30 μs) Application command (30 ~ hundreds μs)
Program language Commands + ladder diagram + SFC Step commands included
Program capacity 999 Steps Built-in EEPROM
Commands Basic commands: 32 (including the STL commands) Application commands: 59
Step relay (latched)General step point 128 points S0 ~ S127
Auxiliary relayGeneral 1024 points M0 ~ M511, M768 ~ M999, 744 points; M1000 ~ M1279, 280 points �
Latched 256 points M512 ~ M767
TimerDigital 64 points T0 ~ T63 (100 ms time base)
63 points T64 ~ T126 (10 ms time base)
1 point T127 (1 ms time base)
CounterGeneral 112 points C0 ~ C111
Latched 16 points C112 ~ C127
32 bit 13 points C235, C236, C237, C238, C241, C242, C244, C246, C247, C249, C251, C252, C254 (all latched)
Data registerGeneral 408 points D0 ~ D407
Latched 192 points D408 ~ D599
PointerP 64 points P0 ~ P63
Index registerE/F 2 E, F
ConstantDecimal K 16 bit: –32768 ~ +32767 32 bit: –2147483648 ~ +2147483647
Hexadecimal H 16 bit: 0000 ~ FFFF 32 bit: 00000000 ~ FFFFFFFF
Self diagnosis/protection I/O check, system execution timeout check, invalid command check, program check and password settings
Monitor/debug Program execution time display, bit / word, device settings
Certifications C-Tick, cULus, CE
Control Products Catalog CA08102001E—August 2010 www.eaton.com 17
484848484848484848484848484848484848484848484848484848484848
48.2Operator Interface Products
HMi Operator Interface
HMIEC0806/HMIEC1612, continued
HMIECENT
SpecificationDescription HMIEC0806 HMIEC1612
Power supply voltage 5 Vdc, 1A (supplied by HMi ) 5 Vdc, 1A (supplied by HMi )
Power consumption 0.25W 0.5W
Noise immunityRS, CS, ESD, and EFT Frequency: 80 MHz ~ 1 GHz, 1.4 GHz ~ 2.0 GHz, test level 10 V/m
Frequency: 0.15 MHz ~ 80 MHz, test level 10V(HMi power port and I/O line)Air discharge ±8 kV
Frequency: 80 MHz ~ 1 GHz, 1.4 GHz ~ 2.0 GHz, test level 10 V/mFrequency: 0.15 MHz ~ 80 MHz, test level 10V(HMi power port and I/O line)Air discharge ±8 kV
Surge ±1.5 kV (HMi power port), ±1 kV (I/O line) ±1.5 kV (HMi power port), ±1 kV (I/O line)
±2 kV (HMi power port) ±2 kV (HMi power port)
Ambient temperature/humidity Operation: 0°C to 50°C (temperature), 10 to 90% (humidity) Operation: 0°C to 50°C (temperature), 10 to 90% (humidity)
Storage: –40°C to 85°C (temperature), 10 to 90% (humidity) Storage: –40°C to 85°C (temperature), 10 to 90% (humidity)
Vibration/shock IEC 61131-2 Compliant IEC 61131-2 Compliant
5 Hz ≤ f < 9 Hz = Continuous: 1.75 mm / Occasional: 3.5 mm 5 Hz ≤ f < 9 Hz = Continuous: 1.75 mm / Occasional: 3.5 mm
9 Hz ≤ f ≤ 150 Hz = Continuous: 0.5g / Occasional: 1.0g 9 Hz ≤ f ≤ 150 Hz = Continuous: 0.5g / Occasional: 1.0g
X, Y, Z directions for 10 times X, Y, Z directions for 10 times
Weight 95.5g 116g
Input Point Electric Specifications
Input type DC (SINK or SOURCE) DC (SINK or SOURCE)
Input voltage 24 Vdc (5mA) 24 Vdc (5mA)
Active level Off ➝ On, above 16 Vdc Off ➝ On, above 16 Vdc
On ➝ Off, below 14.4 Vdc On ➝ Off, below 14.4 Vdc
Response time Approx. 10 ms Approx. 10 ms
Output Point Electric Specifications
Output type Relay-R Relay-R
Current specifications 1.5A/1 point (5A/COM) 1.5A/1 point (5A/COM)
Voltage specifications 250 Vac, below 30 Vdc 250 Vac, below 30 Vdc
Maximum loading 75 VA (inductive), 90W (resistive) 75 VA (inductive), 90W (resistive)
Response time Approx. 10 ms Approx. 10 ms
Mechanical life 2–107 times (without load) 2–107 times (without load)
Electrical life 100,000 times (3A 250 Vac/30 Vdc) 100,000 times (3A 250 Vac/30 Vdc)
6,000 times (5A 250 Vac/30 Vdc) 6,000 times (5A 250 Vac/30 Vdc)
Description Specification
Power supply voltage 5 Vdc ±10%, 1A (provided by HMi )
Interfaced supported RJ-45 with auto MDI/MDIX
Number of ports 1
Transmission method(standard conformance)
IEEE 802.3, IEEE 802.3u
Transmission cable Category 5e (TIA/EIA-568-A, TIA/EIA-568-B)
Transmission speed 10/100 Mbps auto detection
Ethernet protocol ICMP, IP, TCP, UDP, DHCP, Modbus TCP
Noise immunity ESD (IEC 61131-2, IEC 61000-4-2): 8 kV air dischargeEFT (IEC 61131-2, IEC 61000-4-4): Power line: 2 kV, Communication I/O: 1 kVDamped-oscillatory wave: Power line: 1 kV, digital I/O: 1 kVRS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m
Certifications C-Tick, cULus, CE
18 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.2 Operator Interface Products
HMi Operator Interface
DimensionsApproximate Dimensions in Inches (mm)
HMI04
HMI06 �
HMI08CE
Note� HMI06CU does not have function buttons.
5.54(140.8)
F1
1.44(36.7)
.06~.12(1.6~3.0)
4.13(104.8)
.12 (3.0) RTyp.
3.61(91.8)
4.64(117.8)
POWER
Cut-Out Dimensions
F2
F3
F4
SYS
7.25(184.1)
F1
1.54(39.0)
.06~.12(1.6~3.0)
5.67(144.1)
6.1(.24) .12 (3.0) R
Typ.
5.21(132.4)
6.79(172.4)
F2
F3
F4
SYS
POWER
Cut-Out Dimensions
9.57(243.1)
F1
1.75(44.4)
.06~.12(1.6~3.0)
7.01(178.1)
6.1(.24)
.12 (3.0) RTyp.
6.55(166.4)
9.11(231.4)
Cut-Out Dimensions
F2
F3
F4
F5
F6
SYS
POWER
Control Products Catalog CA08102001E—August 2010 www.eaton.com 19
484848484848484848484848484848484848484848484848484848484848
48.2Operator Interface Products
HMi Operator Interface
Approximate Dimensions in Inches (mm)
HMI10CE
HMIEC0806 and HMIEC1612 Expansion Modules
11.70(297.1)
F1
1.70(43.1)
.06~.12(1.6~3.0)
8.74(222.1)
6.1(.24)
.12 (3.0) RTyp.
8.27(210.2)
11.22(285.2)
Cut-Out Dimensions
F2
F3
F4
F5
F6
F7
SYS
POWER
.46(11.8)
2.50(63.6)
4.22(107.3)
3.56(90.4)
.46(11.8)
2.50(63.6)
4.22(107.3)
3.56(90.4)
.20(5.0)
.33(8.3)
6.0(15.2)
2.36(60.0)
.27(6.9)
.14(3.5)
.26(6.5)
2.50(63.6)
3.86(98.1)
.15(3.9)
.46(11.8) .33
(8.3)
.74(18.9)
1.25(31.8)
.20(5.0)
1.57(40.0)2.13
(54.2)HMIEC1612
HMIEC0806
20 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.2 Operator Interface Products
HMi Operator Interface
Approximate Dimensions in Inches (mm)
HMIECENT Ethernet Expansion Module
.27(6.9)
2.76(70)
3.54(90)
.16(4)
2.13(54)
.42(10.6)
1.18(29.9)
.91(23)
4.15(105.3)
Control Products Catalog CA08102001E—August 2010 www.eaton.com 21
484848484848484848484848484848484848484848484848484848484848
48.3Operator Interface Products
PanelMate Operator Interface
PanelMate Operator Interface ContentsDescription Page
PanelMate Operator Interface Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . 22
ePro PS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Standalone Touchscreen Displays . . . . . . . . . . . . . . . . . 30
Canvas Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
PanelMate Power Pro LT1100, 1700, 3000 and 5000 . . 34
PanelMate PC Pro Runtime Hardware Key . . . . . . . . . . 41
Power Pro Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Legacy Products Spare Parts . . . . . . . . . . . . . . . . . . . . . 52
DrawingsOnline
Product DescriptionMachine builders and manufacturing system designers increasingly recognize the benefits of using electronic operator interface devices to replace pushbuttons, lights, gauges and other traditional hardwired devices.
Most choose dedicated operator interface systems because they are easy to use, fully integrated and cost-effective.
Industry StandardPanelMate units are flexible, expandable, cost-effective alternatives to traditional operator control panels. A single PanelMate unit easily replaces panels that once contained numerous pushbuttons, indicator lights, thumbwheels, message displays and alarm annunciators.
Features and Benefits● Replaces conventional
control panels at less than half the cost
● Gives operators more information for better control decisions
● Standardizes operator stations and minimizes operator training
● Saves processor memory by utilizing Boolean logic and math functions
● Reduces hardwiring costs and minimizes installation time
● Adds advanced capabilities such as machine diagnostics, troubleshooting, trending and alarms at no additional cost
● Automates documentation.● Meets tight panel space
requirements
22 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.3 Operator Interface Products
PanelMate Operator Interface
Product Selection GuidePanelMate System ComponentsEach PanelMate system requires component selection from three major categories:
● Operator interface—the online unit or operator station
● Configuration software— PC-based software, used to configure and transfer applications to and from the operator interface
● Connectivity—includes optional cables, hardware interfaces and software utilities
Selection Criteria● First, select the most
appropriate operator interface, display type and size, and operator input options for the customer’s application● The selection of the
operator interface model line is driven by such considerations as the size and complexity of the operator interface application, performance requirements, as well as the economic factors of the overall control system
● The display type is chosen based on application complexity and the operator’s proximity to the operator interface
● Operator input options include either touchpanel (keypad) or touchscreen operator interface models. Criteria for selection of the best input method include environmental factors (airborne particles, grease, etc.), and application design (numeric input, one-touch control, etc.)
● Second, select the appropriate configuration editing software for the chosen Operator Interface
Note: If the customer already has configuration software, they may only need a software upgrade.
● Finally, select required connectivity features, such as interface cables, optional high-speed interface cards, and, for some Allen-Bradley� drivers, licensing enabler utilities
● Eaton’s interface cables are ideal for system and application testing. For actual plant floor applications, custom cables are generally required to meet the customer’s requirements for length, environment, termination, etc.
Note: In order to specify the proper cabling and other connectivity options, you must know the target PLC or controller to be used with the operator interface. Required information may include the PLC brand, model number, software/firmware revision level, and hardware/software interface type.
Glossary
Classic—Support PanelMate Power Pro and Canvas applications
EE—Enterprise Edition (extended capabilities)
ePro—PanelMate ePro Series
ePro PS—PanelMate ePro PS (Performance Series)
KP—Keypad (Touchpanel)
OD—Outdoor Series
PP—PanelMate Power Pro Series
SST—Stainless Steel Front Panel Option
TS—Touchscreen
Control Products Catalog CA08102001E—August 2010 www.eaton.com 23
484848484848484848484848484848484848484848484848484848484848
48.3Operator Interface Products
PanelMate Operator Interface
PanelMate Operator Interface Models
Notes� TS and KP options are mutually exclusive.� Classic model required.� Split architecture.
Family Series DisplayTS �
KP� SST OD Classic EE Ethernet
Power Pro SW
CanvasSW
ePro PS 7685T-8 8.4 in color TFT ✓ — — ✓ ✓ ✓ ✓ ✓ � ✓
7685T-10 10.4 in color TFT ✓ — ✓ — ✓ ✓ ✓ ✓ � ✓
7685T-12 12.1 in color TFT ✓ — ✓ ✓ ✓ ✓ ✓ ✓ � ✓
7685T-15 15.0 in color TFT ✓ — ✓ ✓ ✓ ✓ ✓ ✓ � ✓
7600 Display with TS or other inputdevice purchased separately.
— — — — ✓ ✓ ✓ ✓ � ✓
PP 1155 7.4 in grayscale LCD ✓ ✓ — — — — — ✓ —
1175 7.7 in color DSTN ✓ ✓ — — — — — ✓ —
1755 7.4 in grayscale LCD ✓ ✓ — — — — — ✓ —
1785 7.7 in color DSTN ✓ ✓ — — — — — ✓ —
1775 8.4 in color TFT ✓ ✓ — — — — — ✓ —
3985 10.4 in color TFT ✓ ✓ ✓ — — — — ✓ —
5485 10.4 in color TFT — ✓ � ✓ — — — — ✓ —
5785 10.4 in color TFT ✓ ✓ ✓ — — — — ✓ —
24 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.3 Operator Interface Products
PanelMate Operator Interface
ePro PS ContentsDescription Page
ePro PS Application Description . . . . . . . . . . . . . . . . . . . . . . . . . 25
Standards and Certifications . . . . . . . . . . . . . . . . . . . . . 25
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Technical Data and Specifications . . . . . . . . . . . . . . . . . 29
An EatonGreen Solution
Standalone Touchscreen Displays . . . . . . . . . . . . . . . . . . . . 30
Canvas Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
PanelMate Power Pro LT1100, 1700, 3000 and 5000 . . . . . 34
PanelMate PC Pro Runtime Hardware Key . . . . . . . . . . . . . 41
Power Pro Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Legacy Products Spare Parts . . . . . . . . . . . . . . . . . . . . . . . 52
ePro PSProduct DescriptionThe PanelMate ePro PS family is made up of high performance, yet cost-effective operator interface products. The ePro PS family carries on the PanelMate tradition of performance in balance with ease of use. The ePro PS family sets the standard for hybrid OI systems by combining the flexibility of Microsoft� Windows� XP Embedded operating system with the stability and reliability achieved through the solid-state hardware design and exclusive Protect Mode™ that provides protection for the operating system and software.
The ePro PS family provides the performance and flexibility of PC-based operator interfaces without the associated complexity of a PC on the plant floor. With integrated high-speed Ethernet, serial ports, USB ports, removable CompactFlash� and PCMCIA, the ePro PS models can be adapted for a wide variety of user requirements.
The ePro PS family of products are configured with the Canvas� editing software. The Canvas editor supports a modern suite of graphical templates, called controls, for replacing hardwired panel devices such as pushbuttons, indicator lights, bars, readouts, message displays, etc.
The PanelMate ePro PS family of products includes:
● PanelMate ePro PS● PanelMate ePro PS OD
(Outdoor Series)● PanelMate ePro PS EE
(Enterprise Edition)● PanelMate ePro PS Classic
PanelMate ePro PS ODThe PanelMate ePro PS OD (Outdoor Series) operator interface is designed for use in outdoor applications. The OD models offer increased visibility in high ambient light, broad temperature specifications and UV resistance.
PanelMate ePro PS EEThe PanelMate ePro PS EE (Enterprise Edition) operator interface is designed for end users that need more system memory, more data storage or additional Windows XP Embedded components and services to support large Canvas applications or third-party software.
PanelMate ePro PS ClassicThe PanelMate ePro PS Classic operator interface is designed for use by end users that are currently using the PanelMate Power Pro software and are ready for the new PanelMate ePro PS hardware but are not quite ready to convert their PanelMate Power Pro configurations to Canvas applications. Since the PanelMate ePro PS Classic OI supports Power Pro and Canvas Runtime software, the user can utilize the Canvas Runtime software if and when they are ready.
The ePro PS Classic OI is based on the PanelMate ePro PS hardware models with the addition of software and licenses that allow users to run the PanelMate Power Pro Runtime software. One difference is in the area of drivers: the ePro PS Classic OI running PanelMate Power Pro configurations does not support native (non-OPC) communication drivers, but does support up to three OPC drivers simultaneously.
Control Products Catalog CA08102001E—August 2010 www.eaton.com 25
484848484848484848484848484848484848484848484848484848484848
48.3Operator Interface Products
PanelMate Operator Interface
Application DescriptionWhether replacing hard-wired pilot devices and pushbuttons or providing machine control and even SCADA functions, the ePro PS family of products will fit from both a form and functional standpoint. In monitoring and diagnostic applications, as well as operator controls for critical start/stop, ramp/jog and set point adjustment, the PanelMate ePro PS products offer a reliable and safe interface for a wide range of industrial applications such as:
● Discrete manufacturing machine diagnostics and controls
● Oil platform monitoring and control in the petroleum industry
● Central and remote water and wastewater control panels
● Monitoring and control panels for local facilities/air handling equipment
● Tire manufacturing mixing and building processes
● Industrial and commercial power house controls; building HVAC controls
● Material handling and palletizing monitoring and control
● Automotive press and machine parts controls
Features
Standards and Certifications● RoHS, CE mark● UL/cUL and CSA Class I,
Div 2, Groups A, B, C, D
Description Specification
8 in display models 8.40 in (213.4 mm), color TFT display, 16 million colors
SVGA (800 x 600) resolution
400 nits (400 cd/m2), OD models 425 nits (425 cd/m2) brightness
50,000 hours typical life for backlight; field replaceable
Auto dimming
10 in display models 10.40 in (260 mm), color TFT display, 16 million colors
SVGA (800 x 600) resolution
420 nits (420 cd/m2) brightness
50,000 hours typical life for backlight; field replaceable
Auto dimming
12 in display models 12.10 in (307.3 mm), color TFT display, 16 million colors
SVGA (800 x 600) resolution
450 nits (450 cd/m2), OD models 505 nits (505 cd/m2) brightness
50,000 hours typical life for backlight, field replaceable
Auto dimming
15 in display models 15.00 in (381.0 mm), color TFT display, 16 million colors
XGA (1024 x 768) resolution
250 nits (250 cd/m2), OD models 600 nits (600 cd/m2) brightness
50,000 hours typical life for backlight, field replaceable
Auto dimming
Blind node (no display) models VGA (640 x 480), SVGA (800 x 600), XGA (1024 x 768), SXGA (1280 x 1024), UXGA (1600 x 1200) resolution
16 million colors (SXGA and UXGA—65K colors)
Operator entry Touchscreen interface with resistive technology for gloved-hand operation
Pop-up, on-screen alphanumeric keypad support
Hardware/mounting Single-piece lightweight design for easy panel mounting (except blind node models)
Powerful OI capabilities Supports Canvas controls
Built-in two-touch control
Full math and logic expressions
Communications and I/O capabilities One integrated Ethernet port: 10/100Base-T
Two serial ports: RS-232 and RS-232/422/485 (optically isolated)
Four USB ports: V2.0
One CompactFlash� memory card slot
Two PCMCIA Type II slots (or one Type III)
Built-in OPC client/server with support for over 100 OPC drivers for both Ethernet and serial connectivity
One video output port
Protect mode Safeguards the integrity of operating system files and data files by preventing unauthorized alterations and corruption caused by viruses or unexpected power disruptions
26 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.3 Operator Interface Products
PanelMate Operator Interface
Product Selection
PanelMate ePro PS Operator Interface (76xx Series)
NoteCustoms available upon request.
Description Catalog Number
PanelMate ePro PS
8.4 in color TFT display, touchscreen (acrylic), OPC, DC, User manual on CD-ROM 7685T-8
10.4 in color TFT display, touchscreen (glass), OPC, painted steel, DC, User manual on CD-ROM 7685T-10
10.4 in color TFT display, touchscreen (glass), OPC, stainless steel, DC, User manual on CD-ROM 7685ST-10
12.1 in color TFT display, touchscreen (glass), OPC, painted steel, DC, User manual on CD-ROM 7685T-12
12.1 in color TFT display, touchscreen (glass), OPC, stainless steel, DC, User manual on CD-ROM 7685ST-12
15.0 in color TFT display, touchscreen (glass), OPC, painted steel, DC, User manual on CD-ROM 7685T-15
15.0 in color TFT display, touchscreen (glass), OPC, stainless steel, DC, User manual on CD-ROM 7685ST-15
Blind node (no display, see table on Page 31 for display options), OPC, DC, User manual on CD-ROM 7600
PanelMate ePro PS EE (Enterprise Edition)
8.4 in color TFT display, touchscreen (acrylic), OPC, DC, User manual on CD-ROM 7685T-8E
10.4 in color TFT display, touchscreen (glass), OPC, painted steel, DC, User manual on CD-ROM 7685T-10E
10.4 in color TFT display, touchscreen (glass), OPC, stainless steel, DC, User manual on CD-ROM 7685ST-10E
12.1 in color TFT display, touchscreen (glass), OPC, painted steel, DC, User manual on CD-ROM 7685T-12E
12.1 in color TFT display, touchscreen (glass), OPC, stainless steel, DC, User manual on CD-ROM 7685ST-12E
15.0 in color TFT display, touchscreen (glass), OPC, painted steel, DC, User manual on CD-ROM 7685T-15E
15.0 in color TFT display, touchscreen (glass), OPC, stainless steel, DC, User manual on CD-ROM 7685ST-15E
Blind node (no display, see table on Page 31 for display options), OPC, DC, User manual on CD-ROM 7600E
PanelMate ePro PS OD (Outdoor)
8.4 in color TFT display, touchscreen (acrylic), OPC, DC, User manual on CD-ROM 7685T-8OD
12.1 in color TFT display, touchscreen (glass), OPC, painted steel, DC, User manual on CD-ROM 7685T-12OD
12.1 in color TFT display, touchscreen (glass), OPC, stainless steel, DC, User manual on CD-ROM 7685ST-12OD
15.0 in color TFT display, touchscreen (glass), OPC, painted steel, DC, User manual on CD-ROM 7685T-15OD
15.0 in color TFT display, touchscreen (glass), OPC, stainless steel, DC, User manual on CD-ROM 7685ST-15OD
PanelMate ePro PS Classic
8.4 in color TFT display, touchscreen (acrylic), OPC, DC, User manual on CD-ROM 7685T-8C
10.4 in color TFT display, touchscreen (glass), OPC, painted steel, DC, User manual on CD-ROM 7685T-10C
10.4 in color TFT display, touchscreen (glass), OPC, stainless steel, DC, User manual on CD-ROM 7685ST-10C
12.1 in color TFT display, touchscreen (glass), OPC, painted steel, DC, User manual on CD-ROM 7685T-12C
12.1 in color TFT display, touchscreen (glass), OPC, stainless steel, DC, User manual on CD-ROM 7685ST-12C
15.0 in color TFT display, touchscreen (glass), OPC, painted steel, DC, User manual on CD-ROM 7685T-15C
15.0 in color TFT display, touchscreen (glass), OPC, stainless steel, DC, User manual on CD-ROM 7685ST-15C
Blind node (no display, see table on Page 31 for display options), OPC, DC, User manual on CD-ROM 7600C
PanelMate ePro PS
Control Products Catalog CA08102001E—August 2010 www.eaton.com 27
484848484848484848484848484848484848484848484848484848484848
48.3Operator Interface Products
PanelMate Operator Interface
PanelMate ePro PS Spare Parts for all New RoHS Compliant Models �
Note� RoHS compliant units have a silver-colored galvanized steel back cover. Non-RoHS compliant units have a gold-colored plated steel back cover.
Description StandardEnterpriseEdition Classic Outdoor Catalog Number
8.4 Inch Models
Color TFT display assembly ✓ ✓ ✓ — 35-4756-3
Acrylic touchscreen (gaskets 32-01682 and 32-02208 required) ✓ — ✓ — 47-50888
Acrylic touchscreen (gaskets 32-01682 and 32-02208 required) — ✓ — — 47-50888-1
Front panel assembly ✓ ✓ ✓ ✓ 91-01494
Gasket for front panel ✓ ✓ ✓ ✓ 32-01682
Gasket for touchscreen ✓ ✓ ✓ ✓ 32-02208
Backlight kit ✓ ✓ ✓ ✓ 99-5704
Ship kit ✓ ✓ ✓ ✓ 86-00088
Outdoor color TFT display assembly — — — ✓ 34-4290
Outdoor acrylic touchscreen (gaskets 32-1682 and 32-02208 required) — — — ✓ 47-50888-2
10.4 Inch Models
Color TFT display assembly ✓ ✓ ✓ — 35-4756-2
Glass touchscreen ✓ ✓ ✓ — 63-00585
Front panel (CRS) assembly (gaskets 32-02545 and 32-02546 required) ✓ ✓ ✓ — 32-02544
Front panel (SST) assembly (gaskets 32-02545 and 32-02546 required) ✓ ✓ ✓ — 32-02550
Gasket for front panel ✓ ✓ ✓ — 32-02545
Gasket for touchscreen ✓ ✓ ✓ — 32-02546
Backlight kit ✓ ✓ ✓ — 99-5704-2
Ship kit ✓ ✓ ✓ — 86-00090
12.1 Inch Models
Color TFT display assembly ✓ ✓ ✓ — 35-4756
Glass touchscreen ✓ ✓ ✓ — 63-00808
Front panel (CRS) assembly (gaskets 32-02491 and 32-02492 required) ✓ ✓ ✓ ✓ 32-02489
Front panel (SST) assembly (gaskets 32-02491 and 32-02492 required) ✓ ✓ ✓ ✓ 32-02514
Gasket for front panel ✓ ✓ ✓ ✓ 32-02491
Gasket for touchscreen ✓ ✓ ✓ ✓ 32-02492
Backlight kit ✓ ✓ ✓ ✓ 99-5704-3
Ship kit ✓ ✓ ✓ ✓ 86-00089
Outdoor color TFT display assembly — — — ✓ 34-4289
Outdoor glass touchscreen — — — ✓ 63-00841
15.0 Inch Models
Color TFT display assembly ✓ ✓ ✓ — 63-00814
Glass touchscreen ✓ ✓ ✓ — 63-00809
Front panel (CRS) assembly (gaskets 32-02497 and 32-02498 required) ✓ ✓ ✓ ✓ 32-02490
Front panel (SST) assembly (gaskets 32-02497 and 32-02498 required) ✓ ✓ ✓ ✓ 32-02515
Gasket for front panel ✓ ✓ ✓ ✓ 32-02497
Gasket for touchscreen ✓ ✓ ✓ ✓ 32-02498
Backlight kit ✓ ✓ ✓ — 87-02457
Ship kit ✓ ✓ ✓ ✓ 86-00089
Outdoor color TFT display assembly — — — ✓ 63-00853
Outdoor glass touchscreen — — — ✓ 63-00850
Outdoor backlight kit — — — ✓ 87-02515
Blind Node
Ship kit ✓ ✓ ✓ — 86-00087
PanelMate ePro PS
28 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.3 Operator Interface Products
PanelMate Operator Interface
PanelMate ePro PS Spare Parts for all Legacy Non-RoHS Compliant Models �
Note� RoHS compliant units have a silver-colored galvanized steel back cover. Non-RoHS compliant units have a gold-colored plated steel back cover.
Description StandardEnterpriseEdition Classic Outdoor Catalog Number
8.4 Inch Models
Acrylic touchscreen (gaskets 32-01682 and 32-02208 required) ✓ ✓ ✓ — 63-00833
Front panel assembly ✓ ✓ ✓ ✓ 91-01494
Gasket for front panel ✓ ✓ ✓ ✓ 32-01682
Gasket for touchscreen ✓ ✓ ✓ ✓ 32-02208
Backlight kit ✓ ✓ ✓ ✓ 87-02455
Ship kit ✓ ✓ ✓ ✓ 86-00088
Outdoor color TFT display assembly — — — ✓ 63-00854
Outdoor acrylic touchscreen (gaskets 32-1682 and 32-02208 required) — — — ✓ 63-00848
10.4 Inch Models
Color TFT display assembly ✓ — ✓ — 63-00852
Glass touchscreen ✓ — ✓ — 63-00585
Front panel (CRS) assembly (gaskets 32-02545 and 32-02546 required) ✓ — ✓ — 32-02544
Front panel (SST) assembly (gaskets 32-02545 and 32-02546 required) ✓ — ✓ — 32-02550
Gasket for front panel ✓ — ✓ — 32-02545
Gasket for touchscreen ✓ — ✓ — 32-02546
Ship kit ✓ — ✓ — 86-00090
12.1 Inch Models
Color TFT display assembly ✓ ✓ — — 63-00815
Glass touchscreen ✓ ✓ — — 63-00808
Front panel (CRS) assembly (gaskets 32-02491 and 32-02492 required) ✓ ✓ — ✓ 32-02489
Front panel (SST) assembly (gaskets 32-02491 and 32-02492 required) ✓ ✓ — ✓ 32-02514
Gasket for front panel ✓ ✓ — ✓ 32-02491
Gasket for touchscreen ✓ ✓ — ✓ 32-02492
Backlight kit ✓ ✓ — ✓ 87-02456
Ship kit ✓ ✓ — ✓ 86-00089
Outdoor color TFT display assembly — — — ✓ 63-00842
Outdoor glass touchscreen — — — ✓ 63-00841
15.0 Inch Models
Color TFT display assembly ✓ ✓ — — 63-00814
Glass touchscreen ✓ ✓ — — 63-00809
Front panel (CRS) assembly (gaskets 32-02497 and 32-02498 required) ✓ ✓ — ✓ 32-02490
Front panel (SST) assembly (gaskets 32-02497 and 32-02498 required) ✓ ✓ — ✓ 32-02515
Gasket for front panel ✓ ✓ — ✓ 32-02497
Gasket for touchscreen ✓ ✓ — ✓ 32-02498
Backlight kit ✓ ✓ — — 87-02457
Ship kit ✓ ✓ — ✓ 86-00089
Outdoor color TFT display assembly — — — ✓ 63-00853
Outdoor glass touchscreen — — — ✓ 63-00850
Outdoor backlight kit — — — ✓ 87-02515
Blind Node
Ship kit ✓ ✓ ✓ — 86-00087
PanelMate ePro PS
Control Products Catalog CA08102001E—August 2010 www.eaton.com 29
484848484848484848484848484848484848484848484848484848484848
48.3Operator Interface Products
PanelMate Operator Interface
Technical Data and Specifications
PanelMate ePro PS
Description Specification
Memory PS, OD and classic models: 512 MB DDR2 RAM, 1 GB internal CompactFlash (C and D drive)
EE models: 1 GB DDR2 RAM, 4 GB internal CompactFlash (C drive), 512 MB external CompactFlash (D drive)
All models: External CompactFlash card slot, USB and PCMCIA ports available for additional memory
Voltage 24 Vdc nominal (16–30 Vdc)
Power consumption/ heat output
8 in display models: 31 watts (105 BTU/hour)
10 in display models: 33 watts (113 BTU/hour)
12 in display models: 35 watts (120 BTU/hour)
15 in display models: 54 watts (184 BTU/hour), OD 52 watts (178 BTU/hour)
Blind node (no display) models: 24 watts (82 BTU/hour)
Current 8 in display models: 1.3A
10 in display models: 1.4A
12 in display models: 1.5A
15 in display models: 2.25A
Blind node (no display) models: 1.0A
Peak inrush current 8 in display models: 7.0A
10 in display models: 7.0A
12 in display models: 7.0A
15 in display models: 8.0A
Blind node (no display) models: 7.0A
Installation rating All ePro PS display models are approved for use in Type 4, 4X, 12 and IP65 installations when properly mounted in a correspondingly rated enclosure
System ambient temperature
All models—Operating: 0 to 60°C (32 to 140°F)
Non-operating: –25 to 70°C (–13 to 158°F)
System vibration Operating and non-operating: 1G from 5–500 Hz
System shock Operating and non-operating: 100G
Relative humidity Operating: 20–95% non-condensing
Non-operating: 20–95% non-condensing
Altitude Operating: 10,000 ft (3,048m) above sea level
Non-operating: 40,000 ft (12,192m) above sea level
Emissions CISPR 11 Class A, radiated and conducted
Noise immunity IEC 61000-4-2, 3, 4, 5, 6, 8, 11
Overall dimensions (H x W x D)
8 in display models: 7.63 x 10.51 x 3.90 in (193.8 x 267.0 x 99.1 mm)
10 in display models: 12.00 x 12.30 x 3.90 in (304.8 x 312.4 x 99.1 mm)
12 in display models: 11.60 x 15.90 x 3.90 in (294.6 x 403.9 x 99.1 mm)
15 in display models: 13.50 x 18.60 x 4.00 in (342.9 x 472.4 x 101.6 mm)
Blind node (no display) models: 9.30 x 12.00 x 3.60 i. (236.2 x 304.8 x 91.4 mm)
Cutout dimensions(H x W)
8 in display models: 6.50 x 9.38 in (165.1 x 238.3 mm)
10 in display models: 11.02 x 11.40 in (279.9 x 289.6 mm)
12 in display models: 10.12 x 14.34 in (257.0 x 364.2 mm)
15 in display models: 12.05 x 17.01 in (306.1 x 432.1 mm)
Blind node (no display) models: Designed for mounting in a cabinet
Weight 8 in display models: 6.0 lbs (2.73 kg)
10 in display models: 10.5 lbs (4.77 kg)
12 in display models: 13.0 lbs (5.91 kg)
15 in display models: 17.0 lbs (7.73 kg)
Blind node (no display) models: 4.5 lbs (2.05 kg)
30 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.3 Operator Interface Products
PanelMate Operator Interface
Standalone Touchscreen Displays ContentsDescription Page
ePro PS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Standalone Touchscreen Displays Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Technical Data and Specifications . . . . . . . . . . . . . . . . . 31
Canvas Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
PanelMate Power Pro LT1100, 1700, 3000 and 5000 . . . . . 34
PanelMate PC Pro Runtime Hardware Key . . . . . . . . . . . . . 41
Power Pro Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Legacy Products Spare Parts . . . . . . . . . . . . . . . . . . . . . . . 52
Standalone Touchscreen DisplaysProduct DescriptionThree sizes of color TFT flat panel displays with touchscreens are available for use with the PanelMate ePro Blind Nodes. Models are available in 12.1, 15.0 and 17.0 inch sizes. These displays are constructed to handle rugged environments and can be easily mounted in a cabinet or a kiosk.
Features● 12.1 in SVGA, 15 in XGA
and 17 in SXGA Color TFT LCD displays
● Five-wire analog resistive ELO touchscreen
● Stainless steel open-frame architecture
● Aluminum front bezel.● Strengthened glass
protects the front panel from shock damage
● Approved for use in Type 4, 12 and IP65 installations when properly mounted in a correspondingly rated enclosure
Standards and Certifications● CE● FCC Class A● UL
Control Products Catalog CA08102001E—August 2010 www.eaton.com 31
484848484848484848484848484848484848484848484848484848484848
48.3Operator Interface Products
PanelMate Operator Interface
Product Selection
Standalone Touchscreen Displays
Technical Data and Specifications
PanelMate Standalone Touchscreen Displays
Description Catalog Number
12.1 in color TFT display, ELO touchscreen (glass), AC 7585DT-12
15.0 in color TFT display, ELO touchscreen (glass), AC 7585DT-15
17.0 in color TFT display, ELO touchscreen (glass), AC 7585DT-17
Description Specification
Voltage 100–240 Vac
System ambient operating temperature Operating: 32 to 122°F (0 to 50°C)
System vibration 12.1 in models: 10–200 Hz, 0.15 mm, 10 cycle, 1G
15.0 in models: 10 Hz, 0.15 mm, 10 cycle, 1G
17.0 in models: 10–500 Hz
System shock 12.1 in models: 15G peak acceleration (50 ms duration)
15.0 in models: 30G peak acceleration (11 ms duration)
17.0 in models: 30G peak acceleration (11 ms duration)
Backlight 12.1 in models: 50,000 typical life
15.0 in models: 50,000 typical life
17.0 in models: 30,000 typical life
Overall dimensions (H x W x D) 12.1 in models: 11.46 x 14.41 x 1.92 in (291.1 x 366.0 x 48.8 mm)
15.0 in models: 13.23 x 17.48 x 2.10 in (336.0 x 444.0 x 53.3 mm)
17.0 in models: 15.71 x 19.02 x 2.25 in (399.0 x 483.1 x 57.2 mm)
Cutout dimensions (H x W) 12.1 in models: 10.16 x 13.11 in (258.1 x 333.0 mm)
15.0 in models: 11.77 x 15.94 in (299.0 x 404.9 mm)
17.0 in models: 14.45 x 17.68 in (367.0 x 449.1 mm)
Weight 12.1 in models: 12 lbs (5.5 kg)
15.0 in models: 14 lbs (6.5 kg)
17.0 in models: 34 lbs (15.4 kg)
7585DT-1_
32 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.3 Operator Interface Products
PanelMate Operator Interface
Canvas Software ContentsDescription Page
ePro PS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Standalone Touchscreen Displays . . . . . . . . . . . . . . . . . . . . 30
Canvas Software Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
PanelMate Power Pro LT1100, 1700, 3000 and 5000 . . . . . 34
PanelMate PC Pro Runtime Hardware Key . . . . . . . . . . . . . 41
Power Pro Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Legacy Products Spare Parts . . . . . . . . . . . . . . . . . . . . . . . 52
Canvas SoftwareProduct DescriptionThe Canvas Software includes the Canvas application development software in addition to the Runtime software for the PanelMate ePro PS and the OPC servers/drivers. Canvas software is used to develop operator interface applications for PanelMate ePro PS industrial operator interface products. The powerful editing environment in Canvas delivers state-of-the-art features previously available only on more expensive, high-end SCADA packages. The included drivers in the form of OPC servers support Ethernet and serial connectivity to virtually any PLC platform or network, as well as a wide array of drives, motion controllers and databases. No additional fees are required.
Canvas Editor
Because the typical application development expense of a Human Machine Interface often far outweighs the expense of the hardware, the demand to design and implement these advanced solutions quickly is of paramount importance. That is why the Canvas advanced Operator Interface software package was designed with ease of use and time savings in mind.
Canvas Editor with Page Thumbnails
Consistent functionality in Canvas from one control to the next and from one area to the next will help you maintain your sense of place within the project and shorten the development time. Canvas makes it easy to create and maintain an application with advanced features such as multi-language, security, recipe management and data archiving. Data may be exported, edited and imported with Microsoft Excel, saving time and ultimately reducing the cost of the project.
Canvas Application
Control Products Catalog CA08102001E—August 2010 www.eaton.com 33
484848484848484848484848484848484848484848484848484848484848
48.3Operator Interface Products
PanelMate Operator Interface
Features● Operator interface—
monitor and control● High-resolution graphical
interface● Built-in two-touch control
for safety applications● Process/machine
diagnostics ● Conversion of legacy
PanelMate configurations● Secure document and
web/network browser● Full mathematical
evaluation● Advanced search and
replace● Security (passwords and
other security devices)● Recipe management● Real-time and historical
alarms and events
● Real-time and historical data archiving and trending
● Notification of data and events via e-mail
● Import/export from XML● Customizable templates/
controls● Scripting (IF, THEN, ELSE,
GOTO capability)● Launch and control of third-
party applications● Multi-language● Reusable controls, images
and pages via index lists● Master pages● Online and offline
simulation● Interface for DVT and
Cognex Vision Systems
System Requirements ● Operating system—
Microsoft Windows XP (SP1 or later) or Microsoft Windows Vista (Canvas V3.3 or later)
● Minimum Video Resolution—XGA (1024 x 768)
Note: File transfers can be done via Ethernet or USB memory devices.
Product Selection
Canvas
Description Catalog Number
Includes Canvas software for developing applications, Runtime software for the PanelMate ePro PS Series and supporting OPC servers/drivers. Single user license. On CD-ROM. Development software requires Windows 2000 or Windows XP operating system.
CANVASPRO
Site license—See CANVASPRO (for all users at 1 site location) CANVASPROSL
Installation CD and licensing to run Canvas runtime software on a PC with Windows XP Professional OS. Licenses for Kepware OPC servers, Data archiving and recipe management are included.
CANVASPC
CANVASPRO
34 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.3 Operator Interface Products
PanelMate Operator Interface
PanelMate Power Pro LT1100, 1700, 3000 and 5000 ContentsDescription Page
ePro PS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Standalone Touchscreen Displays . . . . . . . . . . . . . . . . . . . . 30
Canvas Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
PanelMate Power Pro LT1100, 1700, 3000 and 5000 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Standards and Certifications . . . . . . . . . . . . . . . . . . . . . 35
Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
PanelMate PC Pro Runtime Hardware Key . . . . . . . . . . . . . 41
Power Pro Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Legacy Products Spare Parts . . . . . . . . . . . . . . . . . . . . . . . 52
PanelMate Power Pro LT1100, 1700, 3000 and 5000Product DescriptionThe PanelMate Power Pro Operator Interfaces are a cost-efficient, easy-to-integrate alternative to traditional hardwired operator panels in control systems.
The PanelMate Power Pro products have the same cutout and stud pattern as earlier model PanelMate products and offer increased capabilities.
Control functions, such as machine status indication and pushbutton-style control, are accomplished using built-in templates displayed on a vivid screen. The PanelMate Power Pro simulates the action and performance of hardwired pushbuttons using sealed, recessed membrane control buttons on the touchpanel version or on-screen buttons on the touchscreen version. The proven intuitive operation remains the same in all PanelMate products.
Operators select templates or graphic images by moving a finger around the touchpanel or touchscreen. After selecting a template, the operator performs control actions by pressing control buttons. Users may navigate and initiate control action with just one touch (touchscreen only), if such functionality is configured for the unit using the PanelMate Power Pro Windows-based configuration software.
Control Products Catalog CA08102001E—August 2010 www.eaton.com 35
484848484848484848484848484848484848484848484848484848484848
48.3Operator Interface Products
PanelMate Operator Interface
Features
Simplified Machine Control● Functions such as machine
setup, diagnostics, alarming, trending and custom graphics can be configured easily using the PanelMate Power Pro configuration software. This intuitive software significantly reduces the time and effort needed to create your application. The software also provides complete compatibility of configuration files with other PanelMate series products (Version 2.1 or later)
● Realistic representations of machines and processes can be displayed on all PanelMate models. Detailed symbols can be designed to the pixel level or selected from a symbol library of over 3000 customizable and scalable images. These graphics make displays more meaningful and allow operators to easily recognize and understand the displayed data. The eight-state blinking feature can be used to highlight critical functions, provide animation effects and attract the operator’s attention to important information
● Application flexibility is provided by hardware features that include: ● Approved for use in
Type 4, 4X and 12 installations when properly mounted in a correspondingly rated enclosure. Stainless steel models available for PanelMate Power Pro 3000 and 5000 series
● Executive firmware stored in nonvolatile flash memory for easy upgrades
● Battery-backed clock that can be synchronized externally
● Two RS-232/RS-422 serial ports for communications or printing alarms and messages (except PM 1100 models)
● Optional, high-speed, network interface boards for connectivity to a variety of networks
● System diagnostics● All PanelMate Power
Pro models have up to 100-page, 5000-message capacity
● PanelMate Pro LT supports up to 64 I/O references (expandable up to 512 I/O points) and a single communication driver
● Display features on all units provide VGA (640 x 480) resolution with 256-level grayscale on the gray-scale versions or 256-color palette on color versions
● Touchpanel for all models include a display with electronics module and membrane keypad with offscreen 3 x 5 cell control selection, cancel key and numeric entry keypad, with four redefinable membrane control buttons to the right of the display. The PanelMate 5000 units have five membrane control buttons
● Touchscreen for all models include a display with electronics module and on-screen 3 x 5 cell control selection, four redefinable on-screen control buttons, on-screen cancel key and non-intrusive, pop-up, on-screen numeric keypad. The PanelMate 5000 units have five on-screen control buttons
Displays Available● 7.4 inch grayscale LCD
Flatpanel (PM Pro LT 1100, PMPP 1700)
● 7.7 inch color DSTN Flatpanel (PM Pro LT 1100, PMPP 1700)
● 8.4 inch color TFT Flatpanel (PMPP 1700)
● 10.4 inch color TFT Flatpanel (PMPP 3000 and 5000)
● Split Architecture 10.4 inch color TFT Flatpanel (PMPP 5000)
● All models available in touchscreen and touchpanel (keypad)
Standards and Certifications● CE approved● UL● CSA● UL Class I Division 2
Groups A, B, C, D
36 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.3 Operator Interface Products
PanelMate Operator Interface
Product Selection
PanelMate Pro LT 1100The PanelMate Pro LT 1100 is available with a 7.4 inch grayscale LCD or 7.7 inch color Dual Scan (DSTN) display with full VGA resolution and 256 shades/colors. Models are available with either touchscreen
(acrylic) or touchpanel for operator input and can be mounted in a 4 inch deep enclosure. The PanelMate Pro LT 1100 supports applications with up to 64 I/O references and a single communication driver. The number of
supported I/O references can be upgraded to 512 I/O points (done in blocks of 64 I/O points—see 1100TAG Options). The PanelMate Pro LT 1100 requires 24 Vdc power input.
PanelMate Pro LT 1100 Operator Stations
PanelMate Pro LT 1100 Spare Parts
Description Catalog Number
7.4 Inch Grayscale LCD Display
Touchpanel 1155K
Touchscreen 1155T
7.7 Inch Color DSTN Display
Touchpanel 1175K
Touchscreen 1175T
Description Catalog Number
Keypad (4- and 15-position combined with window) for 1155K, 1175K (gasket 32-01941 required)
63-00742
Gasket for keypad (between keypad and display) for 1155K, 1175K 32-01941
Touchscreen for 1155T and 1175T (gaskets 32-01682 and 32-01941 required)Do not replace 63-00632, contact factory
63-00838
Gasket for touchscreen for 1155T, 1175T:Between touchscreen and front panel 32-01682Between touchscreen and display 32-01941
Front panel assembly for 1155K, 1175K 91-01913
Front panel assembly for 1155T, 1175T 91-01494
Ship kit for 1155K, 1175K 86-00078
Ship kit for 1155T, 1175T 86-00077
PanelMate Pro LT 1100
PanelMate Pro LT 1100
Control Products Catalog CA08102001E—August 2010 www.eaton.com 37
484848484848484848484848484848484848484848484848484848484848
48.3Operator Interface Products
PanelMate Operator Interface
PanelMate Power Pro 1700The PanelMate Power Pro 1700 is available with a 7.4 inch grayscale LCD, 7.7 inch color Dual-Scan (DSTN) or 8.4 inch color TFT display with full VGA resolution and 256 shades/colors. Models are available
with either touchscreen (acrylic) or touchpanel for operator input and can be mounted in a 4 inch deep enclosure. The PanelMate Power Pro models require 24 Vdc power input.
Ordering InformationFor conformal coating, add-CC after the catalog number. Example: 1755K-CC.
PanelMate Power Pro 1700 Operator Stations
PanelMate Power Pro 1700 Spare Parts
Description Catalog Number
7.4 Inch Grayscale LCD Display
Touchpanel 1755K
Touchscreen 1755T
7.7 Inch Color DSTN Display
Touchpanel 1775K
Touchscreen 1775T
8.4 Inch Color TFT Display
Touchpanel 1785K
Touchscreen 1785T
Description Catalog Number
8.4 in color TFT display assembly for 1785 35-4974
Keypad (4- and 15-position combined with window) for 1755K, 1775K(gasket 32-01941 required)
63-00742
Gasket for keypad (between keypad and display) for 1755K, 1775K 32-01941
Front panel gasket for 1755K, 1775K 32-02229
Keypad (4- and 15-position combined with window) for 1785K (gasket 32-02208 required) 63-00741
Gasket for keypad (between keypad and display) for 1785K 32-02208
Touchscreen for 1755T, 1775T (gaskets 32-01682 and 32-01941 required)Do not replace 63-00632; contact factory
63-00835
Gasket for touchscreen for 1755T, 1775T:Between touchscreen and front panel 32-01682
Between touchscreen and display 32-01941
Touchscreen for 1785T (gaskets 32-01682 and 32-02208 required) 63-00831
Gasket for touchscreen for 1785T:Between touchscreen and front panel 32-01682
Between touchscreen and display 32-02208
Front panel assembly for 1755K, 1775K 91-01801
Front panel assembly for 1785K 91-01826
Front panel assembly for 1755T, 1775T, 1785T 91-01494
Gasket for mounting 1785T front panel assembly 32-02005
Backlight kit for 1785 87-02455
Ship kit for 1755K, 1775K, 1785K 86-00060
Ship kit for 1755T, 1775T, 1785T 86-00059
PanelMate Pro 1700
PanelMate Pro 1700
38 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.3 Operator Interface Products
PanelMate Operator Interface
PanelMate Power Pro 3000The PanelMate Power Pro 3000 is available with a 10.4 inch color TFT display with full VGA resolution and 256 colors. Models are available with either touchscreen (glass or acrylic) or touchpanel for operator
input and with painted steel or stainless steel front panels. These units can be mounted in a 5 inch deep enclosure. The PanelMate Power Pro models require 24 Vdc power input.
Ordering InformationFor conformal coating, add-CC after the catalog number. Example: 3985K-CC.
PanelMate Power Pro 3000 Operator Stations
PanelMate Power Pro 3000 Spare Parts
Description Catalog Number
10.4 Inch Color TFT Display
Touchpanel painted steel 3985K
Touchpanel stainless steel 3985SK
Touchscreen (glass) painted steel 3985T
Touchscreen (glass) stainless steel 3985ST
Touchscreen (acrylic) painted steel 3985AT
Touchscreen (acrylic) stainless steel 3985SAT
Description Catalog Number
10.4 in color TFT display assembly for 3985 63-00778
Keypad (4- and 15-position combined with window) for 3985K 63-00740
Plexi-glass window for 3985K series 32-02151
Touchscreen (glass) for 3985T and 3885ST 63-00585
Touchscreen (acrylic) for 3985AT and 3985SAT 63-00592
Front panel for 3985K (gasket 32-02143 required) 32-02141
Front panel for 3985SK (gasket 32-02143 required) 32-02288
Gasket for front panel for 3985K and 3985SK 32-02143
Front panel for 3985T and 3985AT (gaskets 32-02144 and 32-02145 required) 32-02142
Front panel for 3985ST and 3985SAT (gaskets 32-02144 and 32-02145 required) 32-02289
Gasket for front panel for 3985T, 3985ST, 3985AT and 3985SAT 32-02144
Gasket for touchscreen for 3985T, 3985ST, 3985AT and 3985SAT 32-02145
Backlight kit for 3985 87-02379
Ship kit for 3985 86-00066
PanelMate Pro 3000
PanelMate Pro 3000
Control Products Catalog CA08102001E—August 2010 www.eaton.com 39
484848484848484848484848484848484848484848484848484848484848
48.3Operator Interface Products
PanelMate Operator Interface
PanelMate Power Pro 5000The PanelMate Power Pro 5000 features a 10.4 inch color TFT display with full VGA resolution and 256 colors. Models are available with a touchscreen (glass) or touchpanel for operator input and with painted steel or stainless steel. The touchpanel versions are
available with either of two designs—single-piece front panel or the split architecture design. The touchpanel models can be mounted in a 19 inch rack. The cutout and stud patterns for all models are the same as earlier versions of PanelMate products that featured the
13 inch display, including the PanelMate I/II/III. The PanelMate Power Pro models require 24 Vdc power input. The PanelMate Power Pro 5000 can also be ordered with an AC power converter mounted on the back.
PanelMate Power Pro 5000 Operator Stations
Note� Add “-CC” after the catalog number for conformal coating.
Example: 5785K-CC.
Description Catalog Number �
10.4 Inch Color TFT, Single Piece Front Panel
Touchpanel painted steel 5785K
Touchpanel stainless steel 5785SK
Touchpanel painted with AC power converter 5785K-AC
Touchscreen painted steel 5785T
Touchscreen stainless steel 5785ST
Touchscreen painted with AC power converter 5785T-AC
10.4 Inch Color TFT, Split Architecture Design
Touchpanel painted steel 5485K
Touchpanel stainless steel 5485SK
Touchpanel painted with AC power converter 5485K-AC
PanelMate Power Pro 5000
40 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.3 Operator Interface Products
PanelMate Operator Interface
PanelMate Power Pro 5000 Spare Parts
Description Catalog Number
10.4 in color TFT display assembly for 5485, 5785 63-00778
10.4 in backlight kit for 5485, 5785 87-02379
10.4 in front panel for 5585K, 5785K (gasket 32-02301 and 32-02145 required) 47-50632
10.4 in front panel (SST) for 5585SK, 5785SK (gasket 32-02301 and 32-02145 required) 47-50632-2
10.4 in front panel for 55885T, 5785T (gaskets 32-02204 and 32-02145 required) 47-51017
10.4 in front panel (SST) for 5585ST, 5785ST (gaskets 32-02204 and 32-02145 required) 47-51017-2
10.4 in front panel (Upper) for 5285K, 5485K (gasket 32-02308 and 32-02145 required) 47-51016
10.4 in front panel (Upper, SST) for 5285SK, 5485SK (gasket 32-02308 and 32-02145 required) 47-51016-2
10.4 in gasket for front panel for 5585K, 5585SK, 5785K, 5785SK 32-02301
10.4 in gasket for front panel 32-02145
10.4 in touchscreen glass for 5585T, 5785T 63-00585
13.0 in touchscreen for 5585T, 5785T 63-00658
13.0 in front panel for 5585K, 5785K (gasket 32-02301 required) 32-02206
13.0 in front panel (SST) for 5585SK, 5785SK (gasket 32-02301 required) 32-02432
13.0 in front panel for 55885T, 5785T (gaskets 32-02204 and 32-02066 required) 32-02200
13.0 in front panel (SST) for 5585ST, 5785ST (gaskets 32-02204 and 32-02066 required) 32-02430
13.0 in front panel (upper) for 5285K, 5485K (gasket 32-02308 required) 32-02297
13.0 in front panel (upper, SST) for 5285SK, 5485SK (gasket 32-02308 required) 32-02433
13.0 in gasket for front panel for 5585K, 5585SK, 5785K, 5785SK 32-02301
13.0 in gasket for touchscreen for 5585T, 5585ST 32-02066
Gasket for front panel for 5585T, 5585ST 32-02204
Gasket for upper front panel for 5285K, 5285SK, 5485K, 5485SK 32-02308
Membrane keypad (5- and 15-position combined) for 5585K, 5785K 63-00714
Membrane keypad (5-position) for 5285K, 5485K 63-00715
Membrane keypad (15-position) for 5285K, 5485K 63-00375
Front panel (lower) for 5285K, 5485K (gasket 32-01392 required) 32-02303
Front panel (lower, SST) for 5285SK, 5485SK (gasket 32-01392 required) 32-01388
Gasket for lower front panel for 5285K, 5285SK, 5485K, 5485SK 32-01392
Backlight kit for 5585, 5285 87-02137
Add-on 115/230 Vac to 24 Vdc power converter for PanelMate Power Pro 5000,all models. Mounts on back of unit and adds 1.5 in of depth
PM5000-ACKIT
Ship kit for 5585K, 5785K 86-00067
Ship kit for 5585T, 5785T 86-00068
Ship kit for 5285K, 5485K 86-00069
PanelMate Power Pro 5000
Control Products Catalog CA08102001E—August 2010 www.eaton.com 41
484848484848484848484848484848484848484848484848484848484848
48.3Operator Interface Products
PanelMate Operator Interface
PanelMate PC Pro Runtime Hardware Key ContentsDescription Page
ePro PS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Standalone Touchscreen Displays . . . . . . . . . . . . . . . . . . . . 30
Canvas Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
PanelMate Power Pro LT1100, 1700, 3000 and 5000 . . . . . 34
PanelMate PC Pro Runtime Hardware Key Power Pro Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Legacy Products Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . 52
PanelMate PC Pro Runtime Hardware Key
Product DescriptionPanelMate PC Pro is an online version of the PanelMate Power Pro executive software and communication drivers, designed to run on an industry-standard Intel-based personal computer and the Windows NT 4.0 operating system. PanelMate PC Pro is a full 32-bit, Windows NT-compliant software package with 32-bit Windows NT PLC drivers, created to take advantage of standard, open architecture hardware and software developed by other vendors, while maintaining the PanelMate’s legendary simplicity and ease of use.
System RequirementsPanelMate PC Pro software can be installed on any PC running Windows NT 4.0 or greater which meets the following minimum requirements:
● Intel Pentium 133 MHz (200 MHz recommended)
● 32 MB DRAM (64 MB recommended)
● 1 GB hard drive● VGA controller and monitor● Pointing device
(touchscreen preferred)● Windows NT Workstation
V 4.0
Features and Benefits● PanelMate PC Pro allows
the user to tap into the valuable data in PanelMate from other PC applications because PanelMate PC Pro is open—bring data from the plant level down to PanelMate, or feed data from PanelMate PC Pro to other information systems in the plant
● PanelMate PC Pro adheres to Windows standards and is Windows compatible, allowing you to use the extensive networking capabilities of Windows NT
● Use of an open hardware/software platform allows the customer to precisely meet their ever-changing needs with easy processor or capacity upgrades, using off-the-shelf hardware. Supplemental functionality can be added using off-the-shelf software, allowing the user to incorporate control, operator interface, analysis, reporting, and communications into one workstation
● Use an efficient, Dynamic Link Library (DLL) interface to connect the tried-and-true PanelMate operator interface with Steeplechase’s popular Visual Logic Controller soft logic PC control package
● PanelMate PC Pro has the same functionality as the PanelMate Power Pro and is fully compatible with applications created for PanelMate Power Series/PanelMate Power Pro products. Any Power Series/Power Pro application will run on PanelMate PC Pro
Note: When purchasing a PanelMate ePro PS Classic Operator Interface, PanelMate PC Pro is already integrated and ready to run.
Product Selection
PanelMate PC Pro Runtime Hardware Key and License
NoteRuntime software is included with PanelMate Configuration Software PMPROSW and PMPROSWSL, see Page 43.
Description Catalog Number
Runtime Hardware Key to Enable PanelMate PC Pro Runtime SoftwareKey connects to the PC parallel port and has pass-through capabilities. The hardware key is required for PanelMate online operation.
PMPC-RT
42 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.3 Operator Interface Products
PanelMate Operator Interface
Power Pro Software ContentsDescription Page
ePro PS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Standalone Touchscreen Displays . . . . . . . . . . . . . . . . . . . . 30
Canvas Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
PanelMate Power Pro LT1100, 1700, 3000 and 5000 . . . . . 34
PanelMate PC Pro Runtime Hardware Key . . . . . . . . . . . . . 41
Power Pro Software Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Legacy Products Spare Parts . . . . . . . . . . . . . . . . . . . . . . . 52
Power Pro SoftwareProduct DescriptionWindows-based configuration software is used to create PanelMate Power Pro, PanelMate PC Pro and PanelMate ePro configurations offline on a PC. It also permits the editing of character-based configurations from earlier-version PanelMate Series products. The following items can be configured:
● One-touch control (for touchscreen models)
● Customizable pixel-level graphics
● 8-state blink (for 256-level/color models)
● 3-level password protection
● International character set support
● Page change by operators and/or PLC
● User-definable online system prompts to permit non-English or customized text that can be toggled with standard online prompts by operators
● Alarm window with a 100-alarm capacity
Features● Indicator templates● Readout templates● Bar templates● Display templates● Trend templates● Table templates● Variable-size control button
templates● Pop-up maintenance
window● Alarm window● Advanced trend templates● Tag name file support● Expression management● 3000 symbol factory clipart
PLC Communication InterfacesCommunication interfaces are available for the following programmable controllers and are downloaded from the configuration software.
Note: Multiple interfaces may be run simultaneously on PanelMate Power Pro 1700, 2000, 3000, 4000 and 5000 units.
● Allen-Bradley PLC-2, PLC-3, PLC-5 and SLC-500
● Eaton D50, D300, D320● GE Fanuc Series 5, 6, 90● Mitsubishi “A” Series and
“FX” Series● Modicon Modbus ASCII/
RTU● Omron “C” Series plus
CV500, CV1000● PLC-Direct DL 405 Family● Square D SyMax● Siemens S5 Series, 3964R
Protocol, AS511● Simatic TI 305/405 and
500/505 Series● Reliance AutoMate ● Toshiba T2
High Speed Direct Connectivity Available● Allen-Bradley Data
Highway and Data Highway Plus
● Allen-Bradley Remote I/O Link
● GE Fanuc GEnius I/O Network
● Modicon Modbus Plus● PROFIBUS
Transfer CablesPanelMate configuration software packages PMPROSW and PMPROSWSL include a PanelMate 1100, 1700, 3000, 5000 (0518) Transfer Serial Cable.
Control Products Catalog CA08102001E—August 2010 www.eaton.com 43
484848484848484848484848484848484848484848484848484848484848
48.3Operator Interface Products
PanelMate Operator Interface
Product Selection
Windows Configuration Software for PanelMate Power Pro and PanelMate PC Pro
AccessoriesAllen-Bradley Connectivity
Remote I/O, Data Highway, Data Highway Plus
Accelerate/On Interface
Licensed under A-B patented technology, the interface provides a communication port for connecting directly to
the user’s choice of Allen-Bradley PLC networks: Remote I/O Link, Data Highway� or Data Highway
Plus. Can be used simultaneously with PanelMate 1700, 3000 and 5000 serial ports.
Remote I/O, Data Highway, Data Highway Plus
Allen-Bradley PLC Network Upload/Download
Includes royalty for license under Allen-Bradley patented technology.“One-time use” diskette enables the PanelMate unit to upload and download PanelMate configurations to PCs via Allen-Bradley PLC networks. This upload/download feature can be used to conduct the following operations without having to disconnect the PanelMate Unit from the PLC, or open the enclosure to access the serial ports:
● Download configurations from a PC in a central location to PanelMate units on a network
● Upload PanelMate configurations (while units are monitoring and controlling) to a PC for backup
● Download new PanelMate software enhancements to units. Requires Accelerate/On Interface (xx41) and Windows Configuration Software or Transfer Utility option 0621
● Requires A-B RSLinx-OEM version 2.0 or higher or A-B Interchange software
Allen-Bradley PLC Network Upload/Download
Description Catalog Number
PanelMate Power Pro Windows Configuration Software and Manuals with Communication Software Interfaces for all Major PLCs and High-Speed Industrial Networks on CD-ROM with Tag and Expression Management and Symbol Factory Clipart. PMPROSW includes transfer serial cable for PM1700, 3000, 5000 (0518). PMPROSW includes electronic copies of manuals in .PDF format. Single user license.
PMPROSW
Site License—See PMPROSW (for all users at 1 site location) PMPROSWSL
PanelMate Power Pro Upgrade from Previous PanelMate Power Series Software to PanelMate Power Pro software version on CD-ROM. Requires earlier version of PanelMate Power Series software for installation. Single user license.
PMPROSWUP
PanelMate Power Pro Software Upgrade—Site LicenseRequires previous installation of PanelMate Power Pro Software site license (PMPROSWSL). On CD-ROM.
PMPROSWSLUP
Windows Configuration Software
Description Catalog Number
Accelerate/On™ Interface
Direct connect to Remote I/O Link, Data Highway or Data Highway PlusPanelMate Power Pro 1100, 1700 1241
PanelMate Power Pro 3000, 5000 1251
Description Catalog Number
One-time use diskette. Enables upload/download on operator station. 0524
44 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.3 Operator Interface Products
PanelMate Operator Interface
Allen-Bradley DH-485 (SLC-500) Communications
Includes royalty for license under Allen-Bradley patented technology.“One-time use” diskette. Licensed under A-B patented technology, this option enables communications to Allen-Bradley SLC-500 PLCs
through the DH-485 network in a single target Power Series online unit. A-B 1747-AIC Module is only required when simultaneous
interface to PanelMate and PLC programming equipment is desired.
DH-485
Allen-Bradley Communication Cables
PLC Interface Cables for PanelMate Power Pro 1100, 1700, 3000, 5000 and ePro
One 15 ft (4.6m) cable, unless otherwise stated, for communications between a PanelMate 1100, 1700, 3000,
5000 or ePro unit serial port and the PLC communications port using D-Shell connectors. Cables used with
PanelMate ePro require a DB9(M)/DB9(F) converter [converts DB9(M) to DB9(F)].
PLC Interface Cables for PanelMate Power Pro 1100, 1700, 3000, 5000 and ePro
Eaton Connectivity
Eaton Communication Cables
PLC Interface Cables for PanelMate Power Pro 1100, 1700, 3000, 5000, ePro
One 15 ft (4.6m) cable, unless otherwise stated, for communications between a PanelMate 1100, 1700, 3000,
5000 or ePro unit serial port and the PLC communications port using D-Shell connectors.
PLC Interface Cables for PanelMate Power Pro 1100, 1700, 3000, 5000, ePro
Description Catalog Number
Allen-Bradley DH-485 (SLC-500) Communications
One-time use diskettePanelMate Power Pro 1100, 1700 1525
PanelMate Power Pro 3000, 5000 0725
Description Catalog Number
1785-KE, 1771-KC, KD, KE, KF, KG AB21
AB 1747 AIC for SLC 500 (DH-485 INTFC) AB23A
AB SLC 500 direct (6 ft/1.8m) cable AB24A
AB SLC 503/504 (RS-232) Channel 0 AB25
AB PLC5 (RS-232) Channel 0, DF1 AB26
AB PLC5 (RS-422) Channel 0, DF1 cable AB27A
AB MicroLogix� adapter cable (1 ft/0.3m) (DB9F to DB9M) AB29
Description Catalog Number
Eaton D200 cable, for use with 1100, 1700, 3000 or 5000 only CH21A
Eaton D50/D150/D300/D320 (RS-485) cable, for use with1100, 1700, 3000 or 5000 only
CH22A
Eaton D50/D320/D32LT (RS-232) cable for use with ePro and PMPC-RT only—requires D50CPM485
CH23
ELC (RS-485) cable for use with ePro PS and Power Pro only CH24
Control Products Catalog CA08102001E—August 2010 www.eaton.com 45
484848484848484848484848484848484848484848484848484848484848
48.3Operator Interface Products
PanelMate Operator Interface
General Electric Connectivity
GE Fanuc GEnius I/O Interface to GE PLCsThis interface provides a communication port for connection to GE Series 6 and
Series 90 PLCs over the GEnius I/O Network.
GEnius I/O Interface
General Electric Communication CablesPLC Interface Cables for PanelMate Power Pro 1100, 1700, 3000, 5000 or e-Pro
One 15 ft (4.6m) cable, unless otherwise stated, for communications between a PanelMate 1100, 1700, 3000,
5000 or ePro unit serial port and the PLC communications port using D-Shell connectors. Cables used with PanelMate
ePro require a DB9(M)/DB9(F) converter [converts DB9(M) to DB9(F)].
PLC Interface Cables for PanelMate Power Pro 1100, 1700, 3000, 5000 or ePro
Mitsubishi Connectivity
Mitsubishi Communication Cables
PLC Interface Cables for PanelMate Power Pro 1100, 1700, 3000, 5000 or ePro
One 15 ft (4.6m) cable, unless otherwise stated, for communications between a PanelMate 1100, 1700, 3000,
5000 or ePro unit serial port and the PLC communications port using D-Shell connectors. Cables used with PanelMate
ePro require a DB9(M)/DB9(F) converter [converts DB9(M) to DB9(F)].
PLC Interface Cables for PanelMate Power Pro 1100, 1700, 3000, 5000 or ePro
Description Catalog Number
GEnius I/O Interface
For all PanelMate Power Pro 1100, 1700, 3000, 5000 1243
Description Catalog Number
Series 90 programming port GE21A
Series 90 (RS-422) Com 311/711 module GE22
Series 90 (RS-232) Com 311/711 module GE23
Series 6/6+ (RS-422) Com 2–J1 port GE24
Series 6/6+ (RS-232) Com 2–J2 port GE25
Description Catalog Number
A Series—AJ71C24 Module (RS-232) MI21
A Series—AJ71C24 Module (RS-422) cable MI22A
FX/FXo Series—(RS-232/RS-422) converter MI23
46 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.3 Operator Interface Products
PanelMate Operator Interface
Modicon Connectivity
Modicon Modbus Plus PLC Network Upload/Download“One-time use” diskette enables the PanelMate unit to upload and download PanelMate configurations to PCs via Modicon Modbus Plus PLC networks. This upload/download feature can be used to conduct the following operations without having to disconnect the PanelMate Unit from the PLC, or open the enclosure to access the serial ports:
● Download configurations from a PC in a central location to PanelMate units on a network
● Upload PanelMate configurations (while units are monitoring and controlling) to a PC for backup
● Download new PanelMate software enhancements to units. Requires Modbus Plus Interface, Configuration Software or Transfer Utility
Modicon Modbus Plus Network Upload/Download
Modbus Plus Communications and PanelMate This interface provides a communication port for connection to Modicon PLCs
over the Modbus Plus network. Interface mounts to the back of the online unit
and can be mounted in a 4 inch (102 mm) deep enclosure.
Modbus Interface
Modicon Communication CablesPLC Interface Cables for PanelMate Power Pro 1100, 1700, 3000, 5000 or ePro
One 15 ft (4.6m) cable, unless otherwise stated, for communications between a PanelMate 1100, 1700, 3000,
5000 or ePro unit serial port and the PLC communications port using D-Shell connectors. Cables used with PanelMate
ePro require a DB9(M)/DB9(F) converter [converts DB9(M) to DB9(F)].
PLC Interface Cables for PanelMate Power Pro 1100, 1700, 3000, 5000 or ePro
Description Catalog Number
One-time use diskette. Enables upload/download on operator station. To operate, customer requires:1) Modbus Plus Interface (1248) to be installed in unit2) Windows Configuration Software OR Transfer Utility on the PC
0548
Description Catalog Number
Direct Modbus Plus Interface
PanelMate Power Pro 1100, 1700, 3000, 5000 1248
Description Catalog Number
9-pin Modbus MB21
Micro PLC (RJ-45) Modbus cable MB22
Control Products Catalog CA08102001E—August 2010 www.eaton.com 47
484848484848484848484848484848484848484848484848484848484848
48.3Operator Interface Products
PanelMate Operator Interface
Omron Connectivity
Omron Communication Cables
PLC Interface Cables for PanelMate Power Pro 1100, 1700, 3000, 5000 or ePro
One 15 ft (4.6m) cable, unless otherwise stated, for communications between a PanelMate1100, 1700, 3000,
5000 or ePro unit serial port and the PLC communications port using D-Shell connectors. Cables used with PanelMate
ePro require a DB9(M)/DB9(F) converter [converts DB9(M) to DB9(F)].
PLC Interface Cables for PanelMate Power Pro 1100, 1700, 3000, 5000 or ePro
PROFIBUS DP Connectivity
PROFIBUS DP InterfaceThis PROFIBUS DP Slave Adapter interface provides communications between a PanelMate operator interface
and a PROFIBUS network without requiring any additional communications modules. A maximum of one
interface can be installed on each PanelMate unit.
PROFIBUS DP Interface
Siemens Connectivity
PLC Interface Cables for PanelMate Power Pro 1100, 1700, 3000, 5000 or eProOne 15 ft (4.6m) cable, unless otherwise stated, for communications between a PanelMate 1100, 1700, 3000,
5000 or ePro unit serial port and the PLC communications port using D-Shell connectors. Cables used with PanelMate
ePro require a DB9(M)/DB9(F) converter [converts DB9(M) to DB9(F)].
PLC Interface Cables for PanelMate Power Pro 1100, 1700, 3000, 5000 or ePro
Description Catalog Number
C Series (RS-232) OM21
CV Series (RS-232) OM22
C Series (RS-422) cable OM23A
CV Series (RS-422) cable OM24A
CS/CQ Series (RS-232) cable OM25
Description Catalog Number
PROFIBUS DP Slave I/O InterfaceFor all PanelMate Power Pro 1100, 1700, 3000, 5000
1247
Description Catalog Number
Siemens (RS-232) SI21
Siemens S7 HMI cable SI22
48 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.3 Operator Interface Products
PanelMate Operator Interface
Simatic TI Connectivity
Simatic TI Communication Cables
PLC Interface Cables for PanelMate Power Pro 1100, 1700, 3000, 5000 or ePro
One 15 ft (4.6m) cable, unless otherwise stated, for communications between a PanelMate 1100, 1700, 3000,
5000 or ePro unit serial port and the PLC communications port using D-Shell connectors. Cables used with PanelMate
ePro require a DB9(M)/DB9(F) converter [converts DB9(M) to DB9(F)].
PLC Interface Cables for PanelMate Power Pro 1100, 1700, 3000, 5000 or ePro
Square D Connectivity
Square D Communication Cables
PLC Interface Cables for PanelMate Power Pro 1100, 1700, 3000, 5000 or ePro
One 15 ft (4.6m) cable, unless otherwise stated, for communications between a PanelMate 1100, 1700, 3000,
5000 or ePro unit serial port and the PLC communications port using D-Shell connectors. Cables used with PanelMate
ePro require a DB9(M)/DB9(F) converter [converts DB9(M) to DB9(F)].
PLC Interface Cables for PanelMate Power Pro 1100, 1700, 3000, 5000 or ePro
Transfer Serial CableOne 15 ft (4.6m), RS-232 cable with DB9 connectors on each end, for upload/download between standard serial PC communication port and PanelMate serial port.
Transfer Serial Cable
Note� Included in configuration software package PMPROSW and PMPROSWSL.
Description Catalog Number
TI 500, 305 (RS-232) TI21
TI 405 (RS-232) TI22
TI 545 (RS-232) TI23
TI 305-02DM, TI 405 DCM (RS-422) cable TI25A
TI 545-1101 (RS-422) cable TI26A
TI 545-12102, 1104, 1105 cable TI27A
Description Catalog Number
PLC processor cable SD21A
NIM Network Interface Module cable SD22A
Description Catalog Number
PanelMate 1100, 1700, 3000, 5000 additional � 0518
Control Products Catalog CA08102001E—August 2010 www.eaton.com 49
484848484848484848484848484848484848484848484848484848484848
48.3Operator Interface Products
PanelMate Operator Interface
Converter ConnectorsConnectors that convert a 9-pin D-Shell connector to a RJ11 phone jack-style connector.
Converter Connectors
Mounting Collars and PlatesMounting plates and collars can be used when replacing older PanelMate products with newer models with no or minimal cutout changes required.
Adapter Plates (Similar Look to a Painted Steel Front Panel)
Adapter Collars (Raise front of PanelMate 1.00 In [25.4 mm] from the Mounting Surface)
Note� Cutting is required to make the cutout wider; drilling is required for new stud holes.
For touchpanel units, see table above if cutting and drilling is not an option.
Description Catalog Number
RS-232 DB9 (F) / RJ11 (M) converter [converts DB9 (M) to RJ11 (M)]. Ideal for converting PMPP 1700 cables for use with PMPS 1500
0820
RS-232 RJ11 (F) / DB9 (M) converter [converts RJ11 (M) to DB9 (M)]. Ideal for converting PMPS 1500 cables for use with PMPP 1700
0821
Description Catalog Number
Micro PanelMate (D820, D830, D840) to 2- or 4-line ELC graphics panel (ELC-GPxx) keypad
APPM1ELCGP4
6 in PM 500, 1000 to 6 in (HMI06xx) touchscreen and function buttons APPM1HMI6
8 in PM (11xxK, 17xxK, 75xxK-8) keypad to 8 in (11xxT, 17xxT, 75xxT-8, 76xxT-8x) touchscreen
APPS8A
8 in PM (11xxK, 17xxK, 75xxK-8) keypad to 8 in (HMI08CE) touchscreen APPM1HMI8
9 in PM 2000/compact (24xx/25xx) keypad to 8 in PM (11xxK, 17xxK, 75xxK-8) keypad � 1524TP
9 in PM 2000/compact (24xx/25xx) keypad to 8 in PM (11xxT, 17xxT, 75xxT-8, 76xxT-8x) touchscreen
1524TPTS
9 in PM 2000 (26xx/27xx) keypad to 8 in PM (11xxK, 17xxK, 75xxK-8) keypad � 1527TP
9 in PM 2000 (26xx/27xx) keypad to 8 in PM 11xxT, 17xxT, 75xxT-8, 76xxT-8 touchscreen 1527TPTS
9 in PM 2000 (26xx/27xx) touchscreen to 8 in PM (11xxT, 17xxT, 75xxT-8, 76xxT-8x) touchscreen �
1527TS
10 in PM 3000 (39xxK, 75xxK-10) keypad to 10 in (HMI10CE) touchscreen and function buttons
APPM2HMI10
10 in PM 3000 (39xxT, 75xxT-10, 76xxT-10x) touchscreen to (HMI10CE) touchscreen and function buttons
APPM1HMI10
10 in PM ePro (7585K-10) keypad to 10 in ePro PS (76xxT-10x) touchscreen APPS10A
13 in PM 5000 (54xx) keypad-split to 12 in (76xxT-12x) touchscreen APPS12B
14 in PM 4000 (45xx), 13 in 5000 (55xx/57xx) keypad to 12 in PM ePro PS 12 in (7685T-12) touchscreen
APPS12A
14 in PM 4000 (45xx), 13 in 5000 (55xx/57xx) keypad to 15 in (7585DT-15) remote touchscreen display
APFP15A
Description Catalog Number
PM 2000/compact (24xx) touchpanel to PM 11xxK, 17xxK, 75xxK-8 touchpanel collar. For Type 12 installations only.
1524TPCOLLAR
PM 2000 (26xx/27xx) touchpanel to PM 11xxK, 17xxK, 75xxK-8 touchpanel collar. For Type 12 installations only.
1527TPCOLLAR
50 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.3 Operator Interface Products
PanelMate Operator Interface
PanelMate Overlay KitsThe overlay kits are ideal for protecting your screens from dirt, grime and abrasion and are particularly desirable for PanelMate touchscreen
models installed in dirty environments. These overlays have an additional anti-glare feature. The overlays simply adhere to the
front of the display and can be easily removed and replaced when required. Five overlays are included in each kit.
Overlay Kits
PanelMate Pro LT 1100 TagsThe PanelMate Pro LT 1100 I/O Reference Point Expansion is an upgrade kit that includes a hardware key and download software. The upgrades are provided on the
hardware key and are downloaded to a PanelMate Pro LT 1100 from a PC using the provided hardware key and software. The PanelMate Pro LT supports 64 I/O points as
standard and can be upgraded to support a maximum of 512 I/O points (7 upgrades installed).
PanelMate Pro LT Expansion
Description Catalog Number
8.4 in Anti-Glare Overlay Kit, 5 overlays/kit, for use with PanelMate 11xxT, 15xxT, 17xxT, 75xxT-8, 76xxT-8x, and HMI08CE
17AGT
10.4 in Anti-Glare Overlay Kit, 5 overlays/kit, for use with PanelMate Power Pro 3000, 5000 (All 10.4 in models), 75xx-10 (all models), 76xxT-10x, and HMI10CE
39AG
13.0 in Anti-Glare Overlay Kit, 5 overlays/kit, for use with PanelMate Power Pro 5000 (All 13.0 in models)
55AG
12.1 in Anti-Glare Overlay Kit, 5 overlays/kit for use with 12 in PanelMate ePro PS 12 inmodels (76xxT-12x) and 12 in standalone touchscreen displays (7585DT-12)
AG-12
15.0 in Anti-Glare Overlay Kit, 5 overlays/kit for use with PanelMate ePro PS 15 in models (76xxT-15x) and 15 in standalone touchscreen displays (7585DT-15)
AG-15
17.0 in Anti-Glare Overlay Kit, 5 overlays/kit for use with 17 in standalone touchscreen displays (7585DT-17)
AG-17
Description Catalog Number
I/O Reference Point Expansion (64 points per upgrade)
1 x 64 I/O point expansion 1100TAG1
5 x 64 I/O point expansion 1100TAG5
10 x 64 I/O point expansion 1100TAG10
50 x 64 I/O point expansion 1100TAG50
Control Products Catalog CA08102001E—August 2010 www.eaton.com 51
484848484848484848484848484848484848484848484848484848484848
48.3Operator Interface Products
PanelMate Operator Interface
PanelMate ePro PS Restore KitsEach Restore Kit provides a simple way to reset the load of the PanelMate ePro PS internal CompactFlash� that holds the operating system to the factory-installed image or the customer's modified image. This kit is typically used as a field-recovery method for operating system problems, but it can also be used to upgrade the image load of installed units.
Each Restore Kit can be re-used to restore multiple PanelMate ePro PS units or to restore the same PS unit multiple times. The kit used for restoring the factory-installed image must match the model type of the unit being restored to maintain product integrity.
Installation requires a Microsoft-compatible USB keyboard and mouse and an Ethernet network connection.
Restore Kits
Note� RoHS compliant units have a silver-colored galvanized steel back cover.
Non-RoHS compliant units have a gold-colored plated steel back cover.
Description Catalog Number
New RoHS Compliant Models �
Kit to restore PanelMate ePro PS, OD, and Classic units to the current factory image load orthe modified image
76MLPS
Kit to restore PanelMate ePro PS EE units to the current factory image load or the modified image
76MLEE
Legacy Non-RoHS Compliant Models �
Kit to restore PanelMate ePro PS and PS OD Display units to the current factory image load 76MLPSD
Kit to restore PanelMate ePro PS Blind Node units to the current factory image load 76MLPSB
Kit to restore PanelMate ePro PS EE Display units to the current factory image load 76MLEED
Kit to restore PanelMate ePro PS EE Blind Node units to the current factory image load 76MLEEB
Kit to restore PanelMate ePro PS Classic Display units to the current factory image load 76MLPSCD
Kit to restore PanelMate ePro PS Classic Blind Node units to the current factory image load 76MLPSCB
52 Control Products Catalog CA08102001E—August 2010 www.eaton.com
484848484848484848484848484848484848484848484848484848484848
48.3 Operator Interface Products
PanelMate Operator Interface
Legacy Products Spare Parts
PanelMate ePro (75xx Series) Spare Parts
PanelMate Power Series 2000 Spare Parts
PanelMate Power Series 3000 Spare Parts
Description Catalog Number
10.4 in color TFT display assembly for 7585K-10 and 7585T-10 Series 63-00778
Keypad with window for 7585K-8 Series 63-00796
Touchscreen for 7575T-8 Series (gaskets 32-01682 and 32-02437 required) 63-00837
Gasket for touchscreen (between touchscreen and front panel) for 7575T-8 Series 32-01682
Gasket for touchscreen (between touchscreen and display) for 7575T-8 Series 32-02437
Touchscreen for 7585T-8 Series (gaskets 32-01682 and 32-02208 required) 63-00832
Gasket for touchscreen (between touchscreen and front panel) for 7585T-8 Series 32-01682
Gasket for touchscreen (between touchscreen and display) for 7585T-8 Series 32-02208
Keypad for 7585K-10 Series (does not include window) 63-00805
Plexi-Glass window for 7585K-10 Series 32-02151
Touchscreen for 7585T-10 Series 63-00585
Gasket for touchscreen for 7585T-10 Series (between touchscreen and display) 32-02145
Front panel assembly for 7585K-8 Series 91-01985
Front panel assembly for 7575T-8 and 7585T-8 Series 91-01494
Front panel for 7585T-10 Series (gaskets 32-02144 and 32-02145 required) 32-02444
Gasket for front panel for 7585T-10 Series 32-02144
Gasket for touchscreen for 7585T-10 Series 32-02145
Backlight kit for 7585K-8 and 7585T-8 Series 87-02455
Backlight kit for 7585K-10 and 7585T-10 Series 87-02379
Ship kit for 7585K-8 Series 86-00086
Ship kit for 7575T-8 and 7585T-8 Series 86-00083
Ship kit for 7585T-10 Series 86-00085
ISA 1 Port PanelMate PC adapter D712-DHP-ISA
Description Catalog Number
PanelMate Power Series upgrade kit (adds high capacity, dynamic graphics, advanced trending and Modbus enabler)
PMUPGRADE
Membrane keypad (four-position) for 24xx, 26xx, 27xx 63-00395
Description Catalog Number
Keypad with window for 39xx 63-00743
Touchscreen for 39xx 63-00285
PanelMate Power Series upgrade kit (adds high capacity, dynamic graphics, advanced trending and Modbus enabler)
PMUPGRADE
PanelMate ePro
Control Products Catalog CA08102001E—August 2010 www.eaton.com 53
484848484848484848484848484848484848484848484848484848484848
48.3Operator Interface Products
PanelMate Operator Interface
PanelMate Power Series 4000 Spare Parts
PanelMate Power Series 5000 Spare Parts
PanelMate Power Series 1000 Spare Parts
Note� Contact factory.
Description Catalog Number
Membrane keypad (5-position) for 42xx 63-00376
Membrane keypad (15-position) for 42xx 63-00375
Cable for remote keypad 90-00594
Membrane keypad (5-position) for 45xx 63-00391
PanelMate Power Series upgrade kit (adds high capacity, dynamic graphics, advanced trending and Modbus enabler)
PMUPGRADE
Touchscreen for 45xx 63-00773
Description Catalog Number
Membrane keypad (15-position) for 52xx 63-00375
Cable and remote keypad for 52xx 90-00594
Touchscreen for 55xx 63-00773
Touchscreen cable for 55xx 90-00715
PanelMate Power Series upgrade kit (adds high capacity, dynamic graphics, advanced trending and Modbus enabler)
PMUPGRADE
Backlight kit for 52xx, 55xx 87-01783
Description Catalog Number
Front panel, keypad assembly, painted steel for 1218 FRPNL-1218
Front panel, keypad assembly, stainless steel for 218S �
Backlight kit for 1218, 218S 87-02143