Your partner for UXO and landmine detection

Application

MINEX®

4.600 can be connected to a PC/laptop using a data transfer cable. The MINEX

® software enables you to

Install firmware updates

Change device parameters

Read out error diagnosis data The connected MINEX

® 4.600 device is automatically identified at the push of a button and the serial number

of the device is displayed. ® Registered Trademark © Copyright INSTITUT DR. FOERSTER 2010

MINEX® Software

MINEX®

Software

08/10 2

Features of the MINEX® software

The firmware available on the PC (software releases), the settings or “stored” compensation values for various ground conditions are dis-played and, if required, can be updated on the MINEX

® 4.600.

This makes it possible to quickly update several MINEX

® 4.600 devices to the same software

status via the PC.

Real time signal detection for further analysis

Saving the recorded values

Adjusting and programming the start up volume of the MINEX

® 4.600 using the slide.

Ground compensation storing can be pro-grammed: Red setting = OFF: The “learned” ground com-pensation is deleted automatically every time the MINEX

® 4.600 is switched off.

Green setting = ON: The ground compensation is stored.

The connected MINEX®

4.600 is automatically identified at the push of a button.

Error diagnosis data can be read out

A service report can be printed out.

MINEX® Software

08/10

3

Other features

Displaying the serial number

Displaying the service data, date and user

Comment field

Displaying the battery level.

Minimum requirements for the PC/laptop

Windows XP SP 3 32-bit operating system

1 RS 232 serial interface for the data transfer cable (MINEX® 4.600 – PC)

Screen resolution minimum 1024 x 768 pixel

DotNet Framework 3.5 SP1

Scope of delivery/order information

CD with MINEX®

software, Acrobat Reader and DotNet Framework 3.5 SP1 (administrator rights required), as well as German and English Operating Instructions as a pdf file for MINEX

® 4.600 and MINEX

® software.

Name, software Details Order no.

MINEX®

software 1948369

Data transfer cable MINEX® - PC RS 232 serial connecting cable 1853953

MINEX®

Software

08/10 4

For support please contact:

Institut Dr. Foerster GmbH & Co. KG Division DM Detection Systems and Magnetics In Laisen 70 72766 REUTLINGEN GERMANY

Phone + 49 7121 140-312

Fax + 49 7121 140-280

DM@foerstergroup.de http://www.foerstergroup.de

Changes with respect to data and illustrations reserved

Edition 08/10 Author STÖ Order No.1948466 EN