423 / 463 - Pressure and Safety Systemspressureandsafetysystems.com.au/drupal/sites/default/files/423001... · ARI-STEVI® 423 / 463 Electric actuator AUMA SAR Electric multiturn

ARI-STEVI® 423 / 463 Electric actuator ARI-PREMIO

Enclosure IP 652 torque switchesHandwheelAdditional devices available, e.g. potentiometer

••••

Page 2

ARI-STEVI® 423 / 463 Electric actuator AUMA SAR

Electric multiturn actuator, capable of high closing pressuresEnclosure IP 672 torque switches2 travel switches Handwheel Overheating protection for motor as standard Additional devices available, e.g. potentiometerExplosion proof version available

•

••••••• Page 6

ARI-STEVI® 423 / 463 Pneumatic actuator ARI-DP

Reversible pneumatic actuatorActuator with rolling diaphragmAir supply pressure max. 6 barStem protection by bellow Maintenance-free O-ring sealingAssembly of additional devices acc. to DIN IEC 60534-6

••••••

Page 10

ARI-STEVI® 423 / 463with electric and pneumatic actuators

Control valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve)DN 200 and 250

Fig. 423

Fig. 463

Features: Precision guided stemBurnished stemTapered seat ringReplaceable seat and plugScrewed seat ringReducible kvs-valuesRangeability 30 : 1Guided plugTwo-ply bellows seal as standardTravel indicator

••••••••••

Edition 12/07 - Data subject to alteration Data sheet 423001 englisch (english)

2

ARI-STEVI® 423 / 463Electric actuator ARI-PREMIO

Control valve in 3-way-form with electric actuator ARI-PREMIO (3-way mixing valve / 3-way diverting valve)

Fig. 423

Fig. 463

Figure Nominal pressure Material Nominal diameter

12.423 / 12.463 PN16 EN-JL1040 DN200-250 22.423 / 22.463 PN16 EN-JS1049 DN200-25034.423 / 34.463 PN25 1.0619+N DN200-25035.423 / 35.463 PN40 1.0619+N DN200-250Other materials and versions on request.Stem sealing Fig. 423: • PTFE-packing -10°C to +250°C • Pure graphite-packing -10°C to +450°C Fig. 463: • Stainless steel bellows seal with safety stuffing box -60°C to +450°C

Plug design • Mixing plug: parabolic plug / parabolic plug • Diverting plug: parabolic plug / V-port plug

Guiding • Mixing plug: double guiding • Diverting plug: stem and port guidingFlow characteristic • linear Rangeability • 30 : 1Shut off class (Seat / plug leakage classes) • Metal seat - Leakage class IV acc. to DIN EN 1349 or IEC 60534-4Closing pressures refer to page 4.

Technical data for actuator refer to data sheet.

Selection of possible applications Industrial installations, processing technology, plant manufacturing, etc. (other applications on request) Selection of possible flow media Fig. 423: Cooling water, cooling brine, warm water, hot water, steam, gas, etc. Fig. 463: Refrigerant, cooling water, warm water, hot water, thermal oil, steam, gas, etc. (other flow media on request)

Edition 12/07 - Data subject to alteration

Diverting construction(Further information refer to page 16)

3

Dimensions and weightsDN 200 250L (mm) 600 730H2 (mm) 380 440

Fig. 423H (mm) 1013 1073ARI-PREMIO 12 kN ARI-PREMIO 15 kN

PN16 (kg) 208 354PN25/40 (kg) 225 366

Fig. 463H (mm) 1435 1495ARI-PREMIO 12 kN ARI-PREMIO 15 kN

PN16 (kg) 211 389PN25/40 (kg) 238 430

Standard-flange dimensions refer to page 15.

Face-to-face dimension FTF series 1 according to DIN EN 558-1

Parts

Pos. Description Fig. 12.423 Fig. 12.463

Fig. 22.423 Fig. 22.463

Fig. 34.423 / Fig. 35.463 Fig. 34.423 / Fig. 35.463

1 Body EN-GJL-250 , EN-JL1040 EN-GJS-400-18U-LT, EN-JS1049 GP240GH+N, 1.0619+N2 Seat ring * X20Cr13+QT, 1.4021+QT3 Bottom flange EN-GJS-400-18U-LT, EN-JS1049 GP240GH+N, 1.0619+N4 Guide bushing X20Cr13+QT, 1.4021+QT5 Gasket * Pure graphite (CrNi laminated with graphite)6 Studs 25CrMo4, 1.72187 Hexagon nut C35E, 1.11818 Plug * X20Cr13+QT, 1.4021+QT 9 Straight pin * 56Si7, 1.502610 Stem * X20Cr13+QT, 1.4021+QT 12 Stuffing box housing EN-GJS-400-18U-LT, EN-JS1049 GP240GH+N, 1.0619+N13 Guide bushing X20Cr13+QT, 1.4021+QT (hardened)15 Stem adapter * X20Cr13+QT, 1.4021+QT16 Straight pin * 56Si7, 1.502617 Packing ring * PTFE or Pure graphite19 Washer * X5CrNi18-10, 1.430120 Packing box flange EN-GJS-400-18U-LT, EN-JS104921 Studs 25CrMo4, 1.721822 Hexagon nut C35E, 1.118123 Adapter flange EN-GJS-400-18U-LT, EN-JS104924 Hexagon socket head screw 8.8 - A2B25.1 Bellows housing EN-GJS-400-18U-LT, EN-JS1049 GP240GH+N, 1.0619+N25.2 Mounting bonnet EN-GJS-400-18U-LT, EN-JS1049 GP240GH+N, 1.0619+N25.3 Stem- / Bellows unit * X20Cr13+QT, 1.4021+QT / X6CrNiTi18-10, 1.454125.5 Guide bushing X20Cr13+QT, 1.4021+QT (hardened)25.6 Gasket * Pure graphite (CrNi laminated with graphite)25.7 Studs 25CrMo4, 1.721825.8 Hexagon nuts C35E, 1.118125.9 Straight pin 45 S 20 K, 1.072725.10 Packing ring * Pure graphite25.12 Washer * X5CrNi18-10, 1.430125.13 Stuffing box housing GP240GH+N, 1.0619+N25.15 Packing follower * X20Cr13+QT, 1.4021+QT25.16 Sleeve nut * X8CrNiS18-9, 1.430520.17 Screw joint * X8CrNiS18-9, 1.430527 Gasket * Pure graphite (CrNi laminated with graphite)28 Studs 25CrMo4, 1.721829 Hexagon nut C35E, 1.118130 Plug * X20Cr13+QT, 1.4021+QT31 Plug * X20Cr13+QT, 1.4021+QT32 Castle nut * C35E, 1.118133 Cotter pin A4* Spare parts

Information / restriction of technical rules to be observed!ARI-Valves of EN-JL1040 are not allowed to be operated in systems acc. to TRD 110.A production allowance acc. to TRB 801 No. 45 exists (acc. to TRB 801 No. 45 EN-JL1040 is not allowed.)The engineer, designing a system or a plant, is responsible for the selection of the correct valve.

ARI-STEVI® 423 / 463Electric actuator ARI-PREMIO


4

max. permissible closing pressures for both seat positions on flow-to-open P2 = 0 (Observe regulations, refer to page 15.)

Mixing function

DN 200 250

Standard Kvs-valuesSeat-Ø A/B (mm) 200 250Kvs-value 630 1000Travel (mm) 65 65

Reduced Kvs-valuesSeat-Ø A/B (mm) 150 200Kvs-value 400 630Travel (mm) 50 65

Actuator 1)

ARI-PREMIO 12 kN

Closing pressure (bar) II. / III. 5,7 3,1 3,1 1,9

Operating time 2) (s) (Op. speed 0,79 mm/s) 63 82 82

Actuator 1)

ARI-PREMIO 15 kN

Closing pressure (bar) II. / III. 7,4 4 4 2,5


II. Fig. 423: PTFE- / pure graphite-packing; III. Fig. 463: Bellows seal

Diverting function

DN 200 250



Actuator 1)

ARI-PREMIO 12 kN

Closing pressure (bar) II. / III. 10 5,7 5,7 3,9


Actuator 1)

ARI-PREMIO 15 kN

Closing pressure (bar) II. / III. 12,8 7,4 7,4 5,1


II. Fig. 423: PTFE- / pure graphite-packing; III. Fig. 463: Bellows seal

1) Motor voltage: 230V 50Hz 1~ (standard) Other voltages: 24V 50Hz 1~; 24V =; 110V 50/60Hz 1~; 230V 60Hz 1~; 400V 50Hz 3~; 440V 60Hz 3~ Technical data for actuator refer to data sheet ARI-PREMIO.

2) Indicated operating times with 50Hz.

ARI-STEVI® 423 / 463Closing pressures: Electric actuator ARI-PREMIO


5

ARI-STEVI® 423 / 463Notes


6 Edition 12/07 - Data subject to alteration

ARI-STEVI® 423 / 463Electric actuator Auma SAR (MATIC)

Control valve in 3-way-form with electric actuator AUMA (3-way mixing valve / 3-way diverting valve)

Fig. 423

Fig. 463







Diverting construction(Further information refer to page 16)

7Edition 12/07 - Data subject to alteration

ARI-STEVI® 423 / 463Electric actuator Auma SAR (MATIC)

Dimensions and weightsDN 200 250L (mm) 600 730H2 (mm) 380 440

Fig. 423

H (mm) 845 905

AUMA SAR 07.5PN16 (kg) 231 376PN25/40 (kg) 247 388

H (mm) 857 917

AUMA SAR 10.1 PN16 (kg) 234 380PN25/40 (kg) 251 392

H (mm) 932 992


Fig. 463

H (mm) 1290 1350


H (mm) 1302 1362


Standard-flange dimensions refer to page 15. (For version with AUMA SAR Ex other heights.)Face-to-face dimension FTF series 1 according to DIN EN 558-1

Parts


Fig. 22.423 Fig. 22.463

Fig. 34.423 / Fig. 35.463 Fig. 34.423 / Fig. 35.463





Fig. 423

Mixing function

DN 200 250

Standard Kvs-values Seat-Ø A/B (mm) 200 250Kvs-value 630 1000Travel (mm) 65 65


Actuator 1)

AUMA SAR 07.5 Output drive Form A TR 26 x 5

Closing pressure (bar) II.

shut off 11,9 6,6 6,6 4,1controlling 5,5 2,9 2,9 1,8

Torque (Nm) 60 60Operating time 2) (s) 55 71 71Output drive (min -1) 11 11 11

Actuator 1)





Actuator 1)



shut off 40 23,9 23,9 15,3controlling 20 11,1 11,1 7,1


II. Fig. 423: PTFE- / pure graphite-packing

Diverting function

DN 200 250



Actuator 1)




Torque (Nm) 60 60Operating time 2) (s) 55 55 71Output drive (min -1) 11 11

Actuator 1)



shut off 40 24,8 24,8 17,2controlling 20,5 11,9 11,9 8,2


Actuator 1)



shut off 40 40 40 29,6controlling 34,2 20 20 13,8


II. Fig. 423: PTFE- / pure graphite-packing

ARI-STEVI® 423Closing pressures: Electric actuator AUMA SAR

1) Motor voltage: 400V 50Hz 3~ (Other voltages on request) Technical data for actuator refer to price list.




Fig. 463

Mixing function

DN 200 250



Actuator 1)


Closing pressure (bar) III.

shut off 11,9 6,6 6,6 4,1controlling 5,5 3 3 1,8


Actuator 1)





III. Fig. 463: Bellows seal

Diverting function

DN 200 250



Actuator 1)





Actuator 1)





III. Fig. 463: Bellows seal

ARI-STEVI® 463Closing pressures: Electric actuator AUMA SAR

1) Motor voltage: 400V 50Hz 3~ (Other voltages on request) Technical data for actuator refer to price list.



ARI-STEVI® 423 / 463Pneumatic actuator ARI-DP

Control valve in 3-way-form with pneumatic actuator DP (3-way mixing valve / 3-way diverting valve)

Fig. 423

Fig. 463







DP34T

Failure position dependent on valve duty.Retracted stem on air failure:- with a mixing valve port A -> AB is closed- with a diverting valve port B -> AB is closedExtended stem on air failure:- with a mixing valve port B -> AB is closed- with a diverting valve port A -> AB is closed

Top mounted handwheelActuator DP34 DP34TØ D1 (mm) 397 400H1 (mm) 458 608Weight (kg) 17 41Technical data for actuator refer to data sheet DP32-34Tri.

Diverting construction (Further information refer to page 16)

till va

lve ce

nter


Dimensions and weightsDN 200 250L (mm) 600 730H2 (mm) 380 440Ø A (mm) 405

Fig. 423

DP34H (mm) 845 905PN16 (kg) 243 389PN25/40 (kg) 260 401

DP34TH (mm) 1095 1155PN16 (kg) 314 460PN25/40 (kg) 331 472

Fig. 463

DP34H (mm) 1294 1354PN16 (kg) 246 424PN25/40 (kg) 273 465

DP34TH (mm) 1542 1602PN16 (kg) 317 495PN25/40 (kg) 344 536

Standard-flange dimensions refer to page 15.Face-to-face dimension FTF series 1 according to DIN EN 558-1

ARI-STEVI® 423 / 463Pneumatic actuator ARI-DP

Parts


Fig. 22.423 Fig. 22.463

Fig. 34.423 / Fig. 35.463 Fig. 34.423 / Fig. 35.463




max. permissible closing pressures for both seat positions on flow-to-open P2 = 0 (Observe regulations, refer to page 15.)Spring closes port A -> AB or Spring closes port B -> AB

Mixing function

DN 200 250

Standard Kvs-values

Seat-Ø A/B (mm) 200 250Kvs-value 630 1000Travel (mm) 65 65

Reduced Kvs-values

Seat-Ø A/B (mm) 150 200Kvs-value 400 630Travel (mm) 50 65

Actua

torDP

34

Sprin

g ran

ge (b

ar)

0,8-2,4Ai

r sup

ply pr

essu

re m

in. (b

ar)

3,2 II. / III. 2,51,0-2,0 3,0 II. / III. 1,8 1,8 1,11,5-3,0 4,5 II. / III. 5,62,0-4,0 6,0 II. / III. 7,8 4,3 4,3 2,6

Actua

torDP

34T

0,4-1,2 1,6 II. 2,5 b) 1,3 b) 1,3 b)III. 2,5 d) 1,3 d) 1,3 d)

0,8-2,4 3,2 II. 6III. 6 b)

1,0-2,0 3,0 II. 4,3 a) 4,3 a) 2,6 a)III. 4,3 c) 4,3 c) 2,7 c)

1,5-3,0 4,5 II. 12,2III. 12,2 a)

2,0-4,0 6,0 II. / III. 16,6 9,2 9,2 5,8II. Fig. 463: PTFE- / pure graphite-packing;; III. Fig. 463: Bellows sealAir supply pressure max. of pneumatic actuators DP: max. permissible 6 barAir supply pressure max. limit of control valve: max. permissible a) 5 bar b) 4,5 bar c) 4 bar d) 3,5 bar e) 3 bar

ARI-STEVI® 423 / 463Closing pressures: Pneumatic actuator ARI-DP


max. permissible closing pressures on flow-to-open P2 = 0 (Observe regulations, refer to page 15.)Spring closes port A -> AB or Spring closes port B -> AB

Diverting function

DN 200 250



Actua

torDP

34

Sprin

g ran

ge (b

ar)

0,4-1,2

Air s

upply

pres

sure

min.

(bar

)

1,6 II. 1,6III. 1,6 a)

0,8-2,4 3,2 II. / III. 4,5 2,5 2,51,0-2,0 3,0 II. / III. 2,31,5-3,0 4,5 II. / III. 9,8 5,6 5,62,0-4,0 6,0 II. / III. 13,5 7,8 7,8 5,3

Actua

torDP

34T

0,2-1,0 1,2 II. 1,6 b)III. 1,6 e)

0,4-1,2 1,6 II. 4,5 b) 2,5 b) 2,5 b) 1,7 b)III. 4,6 d) 2,5 d) 2,5 d) 1,7 d)

0,8-2,4 3,2 II. 10,5 6 6III. 10,5 b) 6,1 b) 6,1 b)

1,0-2,0 3,0 II. 5,3 a)III. 5,3 c)

1,5-3,0 4,5 II. 20,9 12,2 12,2III. 21 a) 12,2 a) 12,2 a)

2,0-4,0 6 II. / III. 28,4 16,6 16,6 11,5

II. Fig. 423: PTFE- / pure graphite-packing;; III. Fig. 463: Bellows sealAir supply pressure max. of pneumatic actuators DP: max. permissible 6 barAir supply pressure max. limit of control valve: max. permissible a) 5 bar b) 4,5 bar c) 4 bar d) 3,5 bar e) 3 bar

ARI-STEVI® 423 / 463Closing pressures: Pneumatic actuator ARI-DP


ARI-STEVI® 423 / 463Notes

15

Standard-flange dimensions Flanges acc. to DIN EN 1092-1/-2 (Flangeholes / -thickness tol. acc. to DIN 2533/2544/2545)

DN 200 250

PN16

ØD (mm) 340 405

ØK (mm) 295 355

n x Ød (mm) 12 x 22 12 x 26

PN25

ØD (mm) 360 425

ØK (mm) 310 370

n x Ød (mm) 12 x 26 12 x 30

PN40

ØD (mm) 375 450

ØK (mm) 320 385

n x Ød (mm) 12 x 30 12 x 33

Pressure-temperature-ratings acc. to DIN EN 1092-2

Material -60°C to <-10°C * -10°C to 120°C 150°C 200°C 250°C 300°C 350°C 400°C 450°C

EN-JL1040 PN16 (bar) -- 16 14,4 12,8 11,2 9,6 -- -- --

EN-JS1049 PN16 (bar) on request 16 15,5 14,7 13,9 12,8 11,2 -- --

Pressure-temperature-ratings acc. to DIN EN 1092-1

Material -60°C to <-10°C * -10°C to 50°C 100°C 150°C 200°C 250°C 300°C 350°C 400°C 450°C

1.0619+NPN25 (bar) 18,7 25 23,3 21,7 19,4 17,8 16,1 15 14,4 13,9

PN40 (bar) 30 40 37,3 34,7 30,2 28,4 25,8 24 23,1 22,2

Intermediate values for max. permissible operational pressures can be determined by linear interpolation of the given temperature / pressure chart.* Valve with extended bonnet, studs and nuts made of A4-70 (at temperatures below -10°C)

Please indicate when ordering- Figure-No. - Nominal diameter- Nominal pressure- Body material- Plug design- Kvs-value- Stem sealing- Actuator- Special design / accessoriesExample:Figure 35.423, nominal diameter DN250, nominal pressure PN40, body material 1.0619+N, mixing plug, Kvs 400, steam sealing graphite-packing, with pneumatic actuator DP34.

Dimensions in mmWeights in kgPressures in barü (gauge) 1 bar =̂ 105 Pa =̂ 0,1 MPa Kvs in m3/h


ARI-STEVI® 423 / 463Flange dimensions / Pressure-temperature-ratings

16

Technology for the Future. G E R M A N Q U A L I T Y V A L V E S

ARI-Armaturen Albert Richter GmbH & Co. KG, D-33756 Schloß Holte-Stukenbrock, Tel. +49 52 07 / 994-0, Telefax +49 52 07 / 994-158 or 159 Internet: http://www.ari-armaturen.com E-mail: [email protected]

Stem sealing

PTFE-/ Pure graphite-packing Bellows seal with safety stuffing box

Operating modeARI-Control valves are suitable for use with pneumatic or electric actuators.

According to the application two different variations are possible:

Design with mixing plug Design with diverting plug (Attention: reduced Kvs-values)

Design with mixing plug as standard. Select when the valve is used for mixing service (2 inlets, 1 outlet).In exceptions the design with mixing plug can also be used for diverting service (1 inlet, 2 outlets). Only small closing pressures are possible.Design with diverting plug will be used exclusively for diverting service.

ARI-STEVI® 423 / 463Constructions


Documents

423 / 463 - Pressure and Safety Systemspressureandsafetysystems.com.au/drupal/sites/default/files/423001... · ARI-STEVI® 423 / 463 Electric actuator AUMA SAR Electric multiturn