Embed Size (px)
Citation preview
40/10 PM
www.fermator.com
Automatic horizontal sliding car door
DOC-FECMCBP10C00ENONGOING VERSION: 31-10-2014ENG
Residential Low
CommercialLow
Service lifts
www.fermator.com 240/10 PM
PANELS
Opening
Steel doors Glass doors
Metal sheet(1)
Double skin Vision Wien type
visionBevel big
visionFlush big
vision Full glass Full glass hidden trims
Aluminium glass
WC2 - T2
(1)Solid execution option.
APPLICATION RANGE
Opening Clear opening - CO (mm) Clear height - CH (mm)
C2 - T2 600 - 1.400 1.800 - 2.400
Door configuration
STANDARDS
Opening EN 81-21Existing buildings
EN 81-41Impaired mobility
EN 81-71Vandal resistance lifts EN 81-72
Firefighters liftsCat. I Cat. IIC2 - T2
PROTECTION
Opening
IP21Protection against a solid foreign body of 12,5 mm or more in
diameter and protected against vertically falling
drops of water.
IPX3Protected against sprays of water up to 60 degrees
from the vertical.
IP54Protection against dust and protected against water
splashed from all directions.
IP65Sealed against dust and protected against jets of water from all directions.
EExExplosion proof, Group II (surface industries) and Category 2 (explosive
atmosphere between 10 and 1.000 hrs/yr).
Magnetic contact Mechanical contactC2 - T2
SAFETY DEVICES
Opening Photocell Photoelectric barrier Safety edge Emergency power supply Static Dynamic VF5 VF6
C2 - T2
LIFT APPLICATION Door cycles per year: Up to 800.000.Traffic peak of the door: Up to 240 cycles per hour.
Traffic lift speed: Up to 2,5 m/s.
Available1. Ask the commercial department.Not available.1Some option combinations may not be possible.
SILLS
Type of sill Aluminium Reinforced aluminium Steel Steel hidden Massive
Profile detail
Availability Heated sill option
Dust holes Sill support
www.fermator.com3 40/10 PM
Door configuration
CAMS
Compatibility Semiautomatic hinged landing door: Aluminium - Glass, Global, Fermator, B+
Type of cam Lateral retractable Inverted retractable Flexible fixed Fixed
Cam detail
PANEL REGULATION SUPPORT AND PANEL GUIDE
Type of panel regulation support Plus
Type of panel guide Plus
6090
90 9030±0
110
84
250
500
210
10
H
CH
OFH: CH + 220
CH + 338
MO
TOR
Case 40/10 landing doorCoupling Symmetrical clutch Advance opening symmetrical clutch
Unlocking zone +98 / -152 +228 / -273Toe guard type Big 2 section 3 section
H* 750 812(495)
798(405)
Thickness 1,5 1,5 1,5Range All All All
*Contracted toe guard dimension between brackets.T2 opening shown.
All dimensions in mm.
COMPATIBILITY
Available1. Ask the commercial department.Not available.1Some option combinations may not be possible.
www.fermator.com 440/10 PM
ELECTRONIC MODULEType VF5 and VF6.
Adjustable parameters via PC / Console / Smartphone.Working signals available From 12 V to 240 V AC/DC or with BUS CAN.
Opening speed Up to 1 m/s (Regulable).Closing speed Up to 0,6 m/s. Auto-adjustable directly with the panel weight.
Re-opening Integrated with auto-adjustable cycles.
GENERAL FEATURESNoise level < 50 dB.Total weight Reference: T2 CO 800 mm CH 2.000 mm, with sheet metal panels - 62 kg.
Maximum moving mass 360 kg.Locking device Available car door lock type.
INSTALLATIONPre-adjusted and tested to simplify the installation.
Frontal concept, all parts within the sill projection, allows fixing directly to the front or by regulable range of brackets.
DRIVEType Synchronous brushless permanent magnets motor.
Efficiency 80%.Consumptions Standby 4 W / Average per cycle 20 W.Transmission Gearless*. CO 600 - 1.400 mm. Eagle belt.
*Geared antibanging system available.
T2 operator
Technical features
www.fermator.com5 40/10 PM
3
2
2
5
30
120 120
6054
5475
100
= =
5
5
5449
30
20 ≥ 25
= =
160
130
340
8556
120
+45
- 60
+129
-115
30
248 232
≥ 25
+40
- 70
232
≥ 25
150 15015
≥ 25
15
2CO + 50
CO/2 + 20
CO
2CO + 40H
CO
CH
+ 1
0C
H +
350
Con
cent
ricØ
48
Ecce
ntric
Ø 3
3
CO/2 CO/2
CH
+ 2
20
CH
CH
+ 2
20
CARFLOOR
CH
+ 2
20
Technical drawing 2 panel centre parting door
SILLDETAIL
FIXING BRACKET RANGE
STATICEF BRACKET
REGULABLEER BRACKET
REGULABLEEG BRACKET
54 mm sill
thicknessCO ≤ 700 = 3
CO ≥ 750 = 2,5
MECHANICALDETAILS
2 Recomended vertical fixing point for brackets.3 In cases of extreme lower regulation, we recommend to add an extra fixing point to the car front.- All dimensions in mm.
Notes:
www.fermator.com 640/10 PM
2
2
15
5
3033
0
120
8556
120
120120
175
17
6090
30
9080
100
305
40
90
5 40
585 507575
20
+45
- 60
+40
- 70
+129
-115
248 232 232≥
25
≥ 25 ≥ 25 ≥ 25
3
20
160
1,5CO + 50CO
CH
+ 2
20
CH
+ 1
0C
H +
340
CO
CO
H
1,5CO + 40
CO/2 - 125
CO/2 + 20
Con
cent
ricØ
48
Ecce
ntric
Ø 3
3
CH
CH
+ 2
20
CH
+ 2
20
CH
+ 2
20
CARFLOOR
CO
Technical drawing 2 panel side opening door
MECHANICALDETAILS
SILLDETAIL
FIXING BRACKET RANGE
STATICEF BRACKET
REGULABLEER BRACKET
REGULABLEEG BRACKET
thicknessCO ≤ 700 = 3
CO ≥ 750 = 2,5
90 mm sill
2 Recomended vertical fixing point for brackets.3 In cases of extreme lower regulation, we recommend to add an extra fixing point to the car front.- All dimensions in mm.
Notes:
www.fermator.com7 40/10 PM
2
2
15
5
3033
0
120
8556
120
120120
175
17
6070
30
7080
100
305
30
70
5 30
585 507575
20
+45
- 60
+40
- 70
+129
-115
248 232 232≥
25
≥ 25 ≥ 25 ≥ 25
3
20
160
1,5CO + 50CO
CH
+ 2
20
CH
+ 1
0C
H +
340
CO
CO
H
1,5CO + 40
CO/2 - 125
CO/2 + 20
Con
cent
ricØ
48
Ecce
ntric
Ø 3
3
CH
CH
+ 2
20
CH
+ 2
20
CH
+ 2
20
CARFLOOR
CO
Technical drawing 2 panel side opening door
MECHANICALDETAILS
SILLDETAIL
FIXING BRACKET RANGE
STATICEF BRACKET
REGULABLEER BRACKET
REGULABLEEG BRACKET
thicknessCO ≤ 700 = 3
CO ≥ 750 = 2,5
70 mm sill
2 Recomended vertical fixing point for brackets.3 In cases of extreme lower regulation, we recommend to add an extra fixing point to the car front.- All dimensions in mm.
Notes:
Fermator reserves the right to make changes to the specification of the products within this catalogue without prior notice.
General: [email protected]: [email protected] • Brazil: [email protected] • Italy: [email protected] • France: [email protected], [email protected]
China: [email protected] • India: [email protected] • Poland: [email protected] • Germany: [email protected]
Sales contacts
