4 SUPER STAINLESS SUBMERSIBLE FRANKLIN ELECTRIC MOTORS · carry manufacturing, inc. replacement parts 4" super stainless submersible franklin electric motors (continued) construction

CARRY MANUFACTURING, INC.REPLACEMENT PARTS

4" SUPER STAINLESS SUBMERSIBLE FRANKLIN ELECTRIC MOTORS

1/2 Horsepower:Single Phase, 2-Wire, 115/230 Volt, Storm WaterThree Phase, 200/230/460 Volt, Storm Water

3/4 Horsepower:Single Phase, 2-Wire, 230 Volt, Storm WaterSingle Phase, 3-Wire, 230 Volt, Storm WaterThree Phase, 200/230/460 Volt Storm Water

1 Horsepower:Single Phase, 2-Wire, 230 Volt, Storm WaterSingle Phase, 3-Wire, 230 Volt, Storm WaterThree Phase, 200/230/460 Volt, Storm Water

1-1/2 Horsepower: Single Phase, 2-Wire, 230 Volt, Storm WaterSingle Phase, 3-Wire, 230 Volt, Storm WaterThree Phase, 200/230/460/575 Volt, Storm Water

2 Horsepower:Single Phase, 230 Volt, Storm WaterThree Phase, 200/230/460/575 Volt, Storm Water

APPLICATION DATA: These motors are built fordependable operation in 4" diameter discharge pumps. Temperature and time rating continuous in 86oF (30oC) water at 1/4 ft/sec flow past motor. Rotation: CCWfacing the shaft end.

BASIC FEATURES:< Corrosion-Resistant All Stainless Steel Exterior Construction< Stainless Steel Splined Shaft< Hermetically-Sealed Windings< Anti-Track Self-Healing Resin System< Water Lubrication< Filter Check Valve< Kingsbury-type Thrust Bearing< Pressure Equalizing Diaphragm< Built-in Lightning Arrestors (all single phase motors, and 200 & 230 Volt three phase motors)< Removable Water-Bloc Lead Connector< C.S.A. C22.2 #108 Certified< UL 778 Recognized< NEMA Mounting Dimensions

SPECIAL FEATURES:< New bottom end bell materials and sealing methods improve corrosion resistance in aggressive water

conditions.< Two wire motors are split phase designs with integral starting components and do not require a

control box. They feature FRANKLIN'S patented 2-wire BIAC starting switch which providesautomatic torque reversal to aid starting in adverse environments and prevents extreme fast cycling(e.g. due to a water logged tank).

4" SUPER STAINLESSSUBMERSIBLE MOTOR

Effective 02/2013Replacements - 1


4" SUPER STAINLESS SUBMERSIBLE FRANKLIN ELECTRIC MOTORS (continued)

CONSTRUCTION MATERIALS:

Component: Storm Water:Castings 304 SS Over IronStator Shell 301 SSShaft Extension 303 SS or 17-4 SSFasteners 305 SS or 302 SSSeal Cover AcetalSeal Nitrile Rubber LipDiaphragm Nitrile RubberDiaphragm Cover Nickel Plated CRCSlinger Nitrile RubberLead Wire (or Cable) XLPE pigtail (removable)*Lead Potting EpoxyLead Jam Nut 303 SS

* NOTE: Lead Assemblies are sold separately. See page 22 for details.

"L" Dimensions:

MOTOR:1/2 HP, 1 PH, 2-Wire, Storm1/2 HP, 1 PH, 3-Wire, Storm3/4 HP, 1 PH, 2-Wire, Storm3/4 HP, 1 PH, 3-Wire, Storm1 HP, 1 PH, 2-Wire, Storm1 HP, 1 PH, 3-Wire, Storm1-1/2 HP, 1 PH, 2-Wire, Storm1-1/2 HP, 1 PH, 3-Wire, Storm2 HP, 1 PH, Storm

1/2 HP, 3 PH, Storm3/4 HP, 3 PH, Storm1 HP, 3 PH, Storm1-1/2 HP, 3 PH, Storm2 HP, 3 PH, Storm

"L":9.539.53

10.6610.6611.7511.7515.1213.6215.12

9.5310.6611.7511.7513.62

All dimensions are in inches.



4" SUBMERSIBLE FRANKLIN ELECTRIC MOTORS - SERIES 600M

3/4 Horsepower:Single Phase, 3-Wire, 230 Volt, Storm WaterThree Phase, 230/460 Volt Storm Water

1 Horsepower:Single Phase, 3-Wire, 230 Volt, Storm WaterThree Phase, 230/460 Volt, Storm Water

1-1/2 Horsepower: Single Phase, 3-Wire, 230 Volt, Storm WaterThree Phase, 230/460 Volt, Storm Water

2 Horsepower:Single Phase, 230 Volt, Storm WaterThree Phase, 230/460 Volt, Storm Water

3 Horsepower:Single Phase, 230 Volt, Storm WaterThree Phase, 230/460 Volt, Storm Water

APPLICATION DATA: Rugged and dependable,Franklin Electric’s Series 600M motors are designedspecifically to handle the heavy sediment and unique waterchemistries often present in fountain applications. Featuringcorrosion-resistant construction materials to withstand harshconditions, Series 600M motors offer the same reliableperformance found in standard Franklin Motors

BASIC FEATURES:< Mechanical Seal< Corrosion-Resistant Construction< Stainless Steel Splined Shaft< Hermetically-Sealed Windings< Anti-Track Self-Healing Resin System< Water Lubricated Bearings< Filter Check Valve< Kingsbury-Type Thrust Bearing< Pressure Equalizing Diaphragm< Removable Water-BlocTM Lead in Clamp Design< NEMA Pump Mounting Dimensions< UL 778 Recognized< CSA C22.2 #108 Certified



4" SUBMERSIBLE FRANKLIN ELECTRIC MOTORS - SERIES 600M (continued)


Component: Series 600M:Top Casting 303 SSBottom Casting 303 SS Over Iron,

Painted Cast IronStator Shell 316 SSStator Ends Low Carbon SteelShaft Extension 17-4 SSFasteners 300 Series SSSeal Cover Sintered BronzeSeal Mech Seal SiC/SiCDiaphragm Nitrile RubberDiaphragm Cup 316 SSDiaphragm Spring 316 SSDiaphragm Cover Grey IronSlinger Nitrile RubberLead Wire (or Cable) XLPELead Potting EpoxyLead Screws/Clamp 316 SSFilter Delrin & PolyesterLead Water-BlockTM

(Clamp Style)

“L” Dimensions:

MOTOR: “L”:3/4 HP, 1 PH, 3-Wire, 600M 11.123/4 HP, 3 PH, 230/460V, 600M 11.121 HP, 1 PH, 3-Wire, 600M 12.211 HP, 3 PH, 230/460V, 600M 12.211-1/2 HP, 1 PH, 3-Wire, 600M 12.211-1/2 HP, 3 PH, 230/460V, 600M 12.212 HP, 1 PH, 600M 14.092 HP, 3 PH, 230/460V, 600M 14.093 HP, 1 PH, 600M 16.043 HP, 3 PH, 230/460V, 600M 16.04




4" HIGH THRUST SUBMERSIBLE FRANKLIN ELECTRIC MOTORS

1-1/2 Horsepower:

Single Phase, 230 Volt, 316 SSThree Phase, 200/230/460/575 Volt, 316 SS

2 Horsepower:

Single Phase, 230 Volt, 316 SSSingle Phase, 230 Volt, Oil StripperThree Phase, 200/230/460/575 Volt, 316 SSThree Phase, 230/460 Volt, Oil Stripper

3 Horsepower:

Single Phase, 230 Volt, Storm WaterSingle Phase, 230 Volt, 316 SSSingle Phase, 230 Volt, Oil StripperThree Phase, 200/230/460/575 Volt, Storm WaterThree Phase, 200/230/460/575 Volt, 316 SSThree Phase, 230/460 Volt, Oil Stripper

APPLICATION DATA: These motors are built for dependable operation in 4" diameter dischargepumps. Temperature and time rating continuous in 86oF (30oC) water at 1/4 ft/sec flow past motor. Rotation: Single phase, CCW facing shaft end. Three phase, electrically and mechanically reversible.

BASIC FEATURES:

< Corrosion-Resistant Construction< Stainless Steel Splined Shaft< Hermetically-Sealed Windings< Anti-Track Self Healing Resin System< Water Lubrication< Filter Check Valve (Storm Water only)< Kingsbury-type Thrust Bearing< Pressure Equalizing Diaphragm< Sand Fighter Slinger< Built-in Lightning Arrestors (single phase only)< Removable Water-Bloc Lead Connector< NEMA Mounting Dimensions< UL 778 Recognized< C.S.A. CS22.2 #108 Certified

4" HIGH THRUSTSUBMERSIBLE MOTOR



4" HIGH THRUST SUBMERSIBLE FRANKLIN ELECTRIC MOTORS (continued)

SPECIAL FEATURES:< 316 Stainless Steel: Special construction option for Acid, low pH and Seawater applications.< Oil Stripper: Special construction option for applications with high ambient temperatures.< World Wide Adaptability: All standard voltage and hertz ratings are offered - Consult factory for

details.

CONSTRUCTION MATERIALS:Component:CastingsStator ShellStator EndsShaft ExtensionFastenersSeal CoverSealDiaphragmDiaphragm PlateDiaphragm SpringDiaphragm CoverSlingerLead Wire (or Cable)Lead PottingLead Jam NutFilter

Component:CastingsStator ShellStator EndsShaft ExtensionFastenersSeal CoverSealDiaphragmDiaphragm PlateDiaphragm SpringDiaphragm CoverSlingerLead Wire (or Cable)Lead PottingLead Jam NutFilter

Storm Water:301 SS301 SSLow Carbon Steel303 SS300 Series SSBronzeNitrile Rubber Lip SealNitrile Rubber304 SS302 SS304 SSNitrile RubberXLPE Pigtail (removable)*Epoxy303 SSDelrin & Polyester

316 Stainless:316 SS316 SS316 SS17-4 SS316 SS316 SSViton, Carbon, Ceramic Face Type 200 Hydrin304 SS302 SS316 SSNitrile Rubber*Epoxy316 SS-316 SS Plug

Oil Stripper:Ni-Resist Type 1B316 SS316 SS17-4 SS316 SS316 SSViton, Carbon, Ceramic FaceNitrile Rubber with extra capacity-17-7 SSNi-Resist Type 1BNitrile RubberNitrile*Epoxy316 SS-316 SS Plug

* NOTE: Lead assemblies are sold separately. See page 22 for details.



4" HIGH THRUST SUBMERSIBLE FRANKLIN ELECTRIC MOTORS (continued)

“L” Dimensions:

MOTOR:1-1/2 HP, 1 PH, 316 SS1-1/2 HP, 3 PH, 316 SS2 HP, 1 PH, 316 SS2 HP, 1 PH, Oil-Stripper2 HP, 3 PH, 316 SS2 HP, 3 PH, Oil-Stripper3 HP, 1 PH, Storm3 HP, 1 PH, 316 SS3 HP, 1 PH, Oil-Stripper3 HP, 3 PH, Storm3 HP, 3 PH, 316 SS3 HP, 3 PH, Oil-Stripper

"L":19.1218.0020.6222.8719.1221.3719.0623.6225.8716.0620.6222.87




4" OP4 SUBMERSIBLE SUMOTO MOTORS

1/2 Horsepower:Single Phase, 2-Wire, 115/230 Volt, Storm WaterThree Phase, 230/460 Volt, Storm Water

3/4 Horsepower:Single Phase, 2-Wire, 230 Volt, Storm WaterThree Phase, 230/460 Volt Storm Water

1 Horsepower:Single Phase, 2-Wire, 230 Volt, Storm WaterThree Phase, 230/460 Volt, Storm Water

1-1/2 Horsepower: Single Phase, 2-Wire, 230 Volt, Storm WaterThree Phase, 230/460 Volt, Storm Water

2 Horsepower:Three Phase, 230/460 Volt, Storm Water

3 Horsepower:Three Phase, 230/460 Volt, Storm Water

APPLICATION DATA: Sumoto motors are filled with a specialfood grade lubricant. The principal features of the motor areelevated starting torque, mechanical compactness, reliability andsuperior performance. Carry recommends the use of Sumotomotors in applications like continuous duty fountains andhorizontal applications. Contact the factory for specificapplication requirements.

BASIC FEATURES:

< Motor casing, shaft and bottom end made in Stainless Steel AISI304

< High resistance cast iron nickel plated Upper Bracket< Axial and radial thrust ball bearing< Standard mechanical Seal graphite/ceramic< Special Cooling fluid for better lubricant effect to increase life

of moving parts. The liquid with its high thermal capacity givesthe motor superior overload capabilities

< Oversize compensation diaphragm and sand slinger protection< Insulation class F, Protection IP 58< Removable cable connector< NEMA standard coupling dimensions< Maximum voltage fluctuation admissible versus nominal rated voltage: +6% - 10%< Maximum water temperature: 35oC with at least 0.08 mt/sec of water flow speed< Maximum motor starting per hour: 30< Axial Thrust: 4400N from 2.2kW up to 7.5kW< Maximum immersion depth: 150 MT< Horizontal operating position: admitted up to 2.2kW

4" OP4 SUBMERSIBLEMOTORS



4" OP4 SUBMERSIBLE SUMOTO MOTORS (continued)

"H" Dimensions:

MOTOR:1/2 HP, 1 PH, 2-Wire, Storm3/4 HP, 1 PH, 2-Wire, Storm1 HP, 1 PH, 2-Wire, Storm1-1/2 HP, 1 PH, 2-Wire, Storm

1/2 HP, 3 PH, Storm3/4 HP, 3 PH, Storm1 HP, 3 PH, Storm1-1/2 HP, 3 PH, Storm2 HP, 3 PH, Storm 3 HP, 3 PH, Storm

"H":12.8012.8013.7815.16

12.8012.8012.8013.7815.1618.50




SUPER-6" SUBMERSIBLE FRANKLIN ELECTRIC MOTORS

5, 7-1/2, 10 or 15 Horsepower:

Single Phase, 230 Volt Storm WaterSingle Phase, 230 Volt Sand FighterSingle Phase, 230 Volt 316 SS Three Phase, 200/230/460/575 Volt Storm Water w/o SubtrolThree Phase, 200/230/460/575 Volt Storm Water w/ SubtrolThree Phase, 200/230/460/575 Volt Sand Fighter w/ SubtrolThree Phase, 200/230/460/575 Volt 316 SS w/ Subtrol

APPLICATION DATA: These motors are built fordependable operation in 6" diameter discharge pumps. Temperature and time rating continuous in 86oF (30oC)water at 1/2ft/sec flow past motor. Rotation: Single phase,CCW facing shaft end. Three phase, electrically reversible.

BASIC FEATURES:< Double Flange Design< Stainless Steel Splined Shaft< Hermetically-Sealed Windings< Anti-Track Self Healing Resin System< Stainless Steel Shell< Epoxy Coated End Frames< Filter Check Valve

< Kingsbury-type Water LubricatedThrust Bearing

< Pressure Equalizing Diaphragm< Sand Fighter Slinger< Removable Water-Bloc Lead Connector< Copper Bar Rotor< UL 778 Recognized

6" SUPER STAINLESSSUBMERSIBLE MOTOR



SUPER-6" FRANKLIN ELECTRIC SUBMERSIBLE MOTORS (continued)

SPECIAL FEATURES:

< Subtrol Plus Option for Three Phase Motors: A field proven and contractor friendly premium motorprotection system. It protects the motor against overload, under load, overheating and rapid cycling.It also extends the motor warranty. The motor must be ordered with Subtrol Plus heat sensor option.

< Sand Fighter: Special construction option for the challenges of sandy well applications have siliconcarbide seals. In addition to standard warranty also covered for any sand entry damage in properlyconstructed permanent water well installations for a period of one year.

< 316 Stainless Steel: Special construction option for acid, low pH and Seawater pumping applications. All 316 Stainless Steel motors include a Subtrol Plus heat sensor.

< Mining and offshore application motors are available with flat jacketed nitrile lead and abrasiveresistant sealing system. Consult factory for details.

< World-Wide Adaptability: All standard voltage and hertz ratings are offered. Three leadconfiguration suitable for reduced voltage auto-transformer starting.


Component: Storm Water: Sand Fighter: 316 Stainless:

Castings Gray Iron Gray Iron 316 SS

Stator Shell 301 SS 301 SS 316 SS

Stator Ends Low Carbon Steel Low Carbon Steel 316 SS

Shaft Extension 303 SS 303 SS 17-4 SS

Fasteners 300 & 400 Series SS 300 & 400 Series SS 316 SS

Seal Cover 304 SS & Sintered-Bronze

304 SS & Sintered-Bronze

316 SS

Seal Carbon/Ceramic Silicon Carbide Nitrile Carbon/Ceramic

Diaphragm Nitrile Rubber Nitrile Rubber Nitrile Rubber

Diaphragm Plate 304 SS 304 SS 316 SS

Diaphragm Spring 302 SS 302 SS 17-7 SS

Slinger Nitrile Rubber Nitrile Rubber Type 100 Hydrin

Lead Wire (or Cable* Hypalon Hypalon Hypalon

Lead Potting Epoxy Epoxy Epoxy

Filter Delrin & Polyester Delrin & Polyester 316 SS Plug

* NOTE: Lead assemblies are sold separately. See page 22 for details.




SUPER-6" FRANKLIN ELECTRIC SUBMERSIBLE MOTORS (continued)

"L" Dimensions:MOTOR:5 HP, 1 PH, Storm/Sand Fighter5 HP, 1 PH, 316 SS5 HP, 3 PH, Storm/Sand Fighter5 HP, 3 PH, 316 SS7-1/2 HP, 1 PH, Storm/Sand Fighter7-1/2 HP, 1 PH, 316 SS7-1/2 HP, 3 PH, Storm/Sand Fighter7-1/2 HP, 3 PH, 316 SS10 HP, 1 PH, Storm/Sand Fighter10 HP, 1 PH, 316 SS10 HP, 3 PH, Storm/Sand Fighter10 HP, 3 PH, 316 SS15 HP, 1 PH, Storm/Sand Fighter15 HP, 1 PH, 316 SS15 HP, 3 PH, Storm/Sand Fighter15 HP, 3 PH, 316 SS

"L":25.4025.0022.9022.5028.0027.6024.2023.8030.6030.2025.4025.0033.1032.7028.0027.60



1/2 HORSEPOWER MOTORS

PHASE VOLTS MOTOR # APPLICATIONS MOTOR SPECS

1 115 244-50490 400-111-31(H) 4" FRANKLIN SUPER SS, 2-WIRE

1 115 SM-61653050 Consult Factory 4" OP4 SUMOTO, 2-WIRE




3 200 234-50192 400-321-31(H) 4" FRANKLIN SUPER SS


3 230 SM-61670040 Consult Factory 4" OP4 SUMOTO


3 460 SM-61530040 Consult Factory 4" OP4 SUMOTOR

3/4 HORSEPOWER MOTORS





1 230 214-50706 400-121-31(H) 4" FRANKLIN 600M SERIES, 3-WIRE



3 230 234-51206 400-321-31(H) 4" FRANKLIN 600M SERIES



3 460 234-52206 400-341-31(H) 4" FRANKLIN 600M SERIES




1 HORSEPOWER MOTORS


1 230 244-50890 400-121-31(H)or 400-122-31(H)

4" FRANKLIN SUPER SS, 2-WIRE


1 230 214-50890 400-121-31(H)or 400-122-31(H)


1 230 214-50806 400-121-31(H)or 400-122-31(H)

4" FRANKLIN 600M SERIES, 3-WIRE

3 200 234-50392 400-321-31(H)or 400-322-31(H)

4" FRANKLIN SUPER SS

3 230 234-51392 400-321-31(H)or 400-322-31(H)


3 230 234-51306 400-321-31(H)or 400-322-31(H)

4" FRANKLIN 600M SERIES


3 460 234-52394 400-341-31(H)or 400-342-31(H)


3 460 234-52306 400-341-31(H)or 400-342-31(H)





1-1/2 HORSEPOWER MOTORS


1 230 244-30990 401-12X-31(H) or 401-121-31(H) or 401-122-31(H)



1 230 224-30092 401-12X-31(H) or401-121-31(H) or 401-122-31(H)


1 230 224-30006 401-12X-31(H) or401-121-31(H) or 401-122-31(H)


1 230 224-30085 401-12X-32(H) or401-121-32(H) or 401-122-32(H)

4" FRANKLIN HIGH THRUST,316 SS, 3-WIRE

3 200 234-50492 401-32X-31(H) or401-321-31(H) or 401-322-31(H)


3 200 234-50485 401-32X-32(H) or401-321-32(H) or 401-322-32(H)

4" FRANKLIN HIGH THRUST, 316 SS

3 230 234-51492 401-32X-31(H) or401-321-31(H) or 401-322-31(H)


3 230 234-51406 401-32X-31(H) or401-321-31(H) or 401-322-31(H)


3 230 234-51485 401-32X-32(H) or401-321-32(H) or 401-322-32(H)



3 460 234-52494 401-34X-31(H) or401-341-31(H) or 401-342-31(H)


3 460 234-52406 401-34X-31(H) or401-341-31(H) or 401-342-31(H)


3 460 234-52485 401-34X-32(H) or401-341-32(H) or 401-342-32(H)



3 575 234-53494 401-34X-31(H) or401-341-31(H) or 401-342-31(H)


3 575 234-53485 401-34X-32(H) or401-341-32(H) or 401-342-32(H)




2 HORSEPOWER MOTORS


1 230 224-30192 402-12X-31(H) or402-122-31(H) or E6020-12311(H)


1 230 224-30106 402-12X-31(H) or402-122-31(H) or E6020-12311(H)


1 230 224-30187 402-12X-31(H) or402-122-31(H) or E6020-12311(H)

4" FRANKLIN HIGH THRUST, Oil Stripper, 3-WIRE

1 230 224-30185 402-12X-32(H) or402-122-32(H) or E6020-12312(H)

4" FRANKLIN HIGH THRUST, 316 SS, 3-WIRE

3 200 234-30592 402-32X-31(H) or402-322-31(H) or E6020-32011(H)


3 200 234-30585 402-32X-32(H) or402-322-32(H) or E6020-32012(H)


3 230 234-31592 402-32X-31(H) or402-322-31(H) or E6020-32311(H)


3 230 234-31506 402-32X-31(H) or402-322-31(H) or E6020-32311(H)


3 230 234-31587 402-32X-31(H) or402-322-31(H) or E6020-32311(H)

4" FRANKLIN HIGH THRUST, Oil Stripper

3 230 234-31585 402-32X-32(H) or402-322-32(H) or E6020-32312(H)



3 460 234-32594 402-34X-31(H) or402-342-31(H) or E6020-34611(H)


3 460 234-32506 402-34X-31(H) or402-342-31(H) or E6020-34611(H)


3 460 234-32587 402-34X-31(H) or402-342-31(H) or E6020-34611(H)

4" FRANKLIN HIGH THRUST, Oil Stripper

3 460 234-32585 402-34X-32(H) or402-342-32(H) or E6020-34612(H)



3 575 234-33594 402-34X-31(H) or402-342-31(H) or E6020-35711(H)


3 575 234-33585 402-34X-32(H) or402-342-32(H) or E6020-35712(H)




3 HORSEPOWER MOTORS


1 230 224-30226 403-12X-31(H) orE6030-12311(H) or E6030-12321(H)

4" FRANKLIN HIGH THRUST, 3-WIRE

1 230 224-30206 403-12X-31(H) orE6030-12311(H) or E6030-12321(H)


1 230 224-30287 403-12X-31(H) orE6030-12311(H) or E6030-12321(H)

4" FRANKLIN HIGH THRUST,Oil Stripper, 3-WIRE

1 230 224-30285 403-12X-32(H) orE6030-12312(H) or E6030-12322(H)

4" FRANKLIN HIGH THRUST,316 SS, 3-WIRE

3 200 234-30626 403-32X-31(H) orE6030-32011(H) or E6030-32021(H)

4" FRANKLIN HIGH THRUST

3 200 234-30685 403-32X-32(H) orE6030-32012(H) or E6030-32022(H)

4" FRANKLIN HIGH THRUST,316 SS

3 230 234-31626 403-32X-31(H) orE6030-32311(H) or E6030-32321(H)


3 230 234-31606 403-32X-31(H) orE6030-32311(H) or E6030-32321(H)


3 230 234-31687 403-32X-31(H) orE6030-32311(H) or E6030-32321(H)

4" FRANKLIN HIGH THRUST,Oil Stripper

3 230 234-31685 403-32X-32(H) orE6030-32312(H) or E6030-32322(H)



3 460 234-32626 403-34X-31(H) orE6030-34611(H) or E6030-34621(H)


3 460 234-32606 403-34X-31(H) orE6030-34611(H) or E6030-34621(H)


3 460 234-32687 403-34X-31(H) orE6030-34611(H) or E6030-34621(H)

4" FRANKLIN HIGH THRUST,Oil Stripper

3 460 234-32685 403-34X-32(H) orE6030-34612(H) or E6030-34622(H)



3 575 234-33626 403-34X-31(H) orE6030-35711(H) or E6030-35721(H)


3 575 234-33685 403-34X-32(H) orE6030-35712(H) or E6030-35722(H)




5 HORSEPOWER MOTORS


1 230 226-11090 605-121-31(H) or 605-122-31(H) FRANKLIN SUPER-6"

1 230 226-11080 605-121-31(H) or 605-122-31(H) FRANKLIN SUPER-6", SAND FIGHTER

1 230 226-11039 605-121-32(H) or 605-122-32(H) FRANKLIN SUPER-6", 316 SS


3 200 236-65081 605-321-31(H) or 605-322-31(H) FRANKLIN SUPER-6", SAND FIGHTERwith SUBTROL













7-1/2 HORSEPOWER MOTORS


1 230 226-11190 607-121-31(H) or 607-122-31(H)or 607-123-31(H) or 607-124-31(H)

FRANKLIN SUPER-6"

1 230 226-11180 607-121-31(H) or 607-122-31(H)or 607-123-31(H) or 607-124-31(H)

FRANKLIN SUPER-6", SANDFIGHTER

1 230 226-11139 607-121-32(H) or 607-122-32(H)or 607-123-32(H) or 607-124-32(H)

FRANKLIN SUPER-6", 316 SS

3 200 236-65190 607-321-31(H) or 607-322-31(H)or 607-323-31(H) or 607-324-31(H)

FRANKLIN SUPER-6"

3 200 236-65181 607-321-31(H) or 607-322-31(H)or 607-323-31(H) or 607-324-31(H)

FRANKLIN SUPER-6", SANDFIGHTER with SUBTROL

3 200 236-65140 607-321-32(H) or 607-322-32(H)or 607-323-32(H) or 607-324-32(H)


3 230 236-60190 607-321-31(H) or 607-322-31(H)or 607-323-31(H) or 607-324-31(H)

FRANKLIN SUPER-6"

3 230 236-60181 607-321-31(H) or 607-322-31(H)or 607-323-31(H) or 607-324-31(H)


3 230 236-60140 607-321-32(H) or 607-322-32(H)or 607-323-32(H) or 607-324-32(H)


3 460 236-61190 607-341-31(H) or 607-342-31(H)or 607-343-31(H) or 607-344-31(H)

FRANKLIN SUPER-6"

3 460 236-61181 607-321-31(H) or 607-322-31(H)or 607-323-31(H) or 607-324-31(H)


3 460 236-61140 607-341-32(H) or 607-342-32(H)or 607-343-32(H) or 607-344-32(H)


3 575 236-62190 607-341-31(H) or 607-342-31(H)or 607-343-31(H) or 607-344-31(H)

FRANKLIN SUPER-6"

3 575 236-62181 607-321-31(H) or 607-322-31(H)or 607-323-31(H) or 607-324-31(H)


3 575 236-62140 607-341-32(H) or 607-342-32(H)or 607-343-32(H) or 607-344-32(H)




10 HORSEPOWER MOTORS



1 230 226-11280 610-123-31(H) or 610-124-31(H) FRANKLIN SUPER-6", SAND FIGHTER












3 575 236-62281 610-343-31(H) or 610-344-31(H) FRANKLIN SUPER-6" SAND FIGHTERwith SUBTROL




15 HORSEPOWER MOTORS


1 230 226-11390 615-124-31(H) FRANKLIN SUPER-6"

1 230 226-11380 615-124-31(H) FRANKLIN SUPER-6", SAND FIGHTER

1 230 226-11339 615-124-32(H) FRANKLIN SUPER-6", 316 SS

3 200 236-65390 615-324-31(H) FRANKLIN SUPER-6"

3 200 236-65381 615-324-31(H) FRANKLIN SUPER-6", SAND FIGHTER withSUBTROL


3 230 236-60390 615-324-31(H) FRANKLIN SUPER-6"



3 460 236-61390 615-344-31(H) FRANKLIN SUPER-6"



3 575 236-62390 615-344-31(H) FRANKLIN SUPER-6"

3 575 236-62381 615-344-31(H) FRANKLIN SUPER-6" SAND FIGHTER withSUBTROL




4" FRANKLIN MOTOR LEAD

6" MOTOR LEAD

MOTOR LEADS

All replacement motors must be accompanied by areplacement motor lead. All warranties are void if areplacement lead does not accompany a replacementmotor. All leads come standard with a ground wire.

As of February 1999, all Carry pumps have beenmanufactured with SEOW round jacketed cable. Thisnew cable is more pliable than the previously used flatjacketed cable and is also C.S.A. approved for use inCanada. Carry continues to offer the flat jacketed cablefor replacement motors. Carry recommends that all newpumps and motors be assembled using the SEOW roundjacketed cable. If you have any questions, please consultthe factory.

Sumoto motors are available with either a round jacketedcable or a flat jacketed cable depending on the size of themotor. If you have any questions, please consult thefactory.

4" SUMOTO MOTOR LEAD



MOTOR LEADS Part # Description Applications

Recommended Leads40501 30' SEOW Round Jacketed Cable 14/2

AWG w/ GroundFRANKLIN ELECTRIC MOTORS ONLY

1/2HP/1PH/2-Wire Storm Water Pumps/Motors3/4HP/1PH/2-Wire Storm Water Pumps/Motors1HP/1PH/2-Wire Storm Water Pumps/Motors1-1/2HP/1 PH/2-Wire Storm Water Pumps/Motors

40502 30' SEOW Round Jacketed Cable 14/3AWG w/ Ground

FRANKLIN ELECTRIC MOTORS ONLY1/2HP/1PH/3-Wire or 3PH Storm Water Pumps/Motors3/4HP/1PH/3-Wire or 3PH Storm Water Pumps/Motors1HP/1PH/3-Wire or 3PH Storm Water Pumps/Motors1-1/2HP/1PH/3-Wire or 3 PH Storm Water Pumps/Motors2HP/1PH or 3PH Storm Water Pumps/Motors3 HP/1PH or 3PH Storm Water Pumps/ Motors

S-2081300 30' SEOW Round Jacketed Cable 16/2AWG w/ Ground

SUMOTO MOTORS ONLY 1/2HP/1PH/2-Wire Storm Water Pumps/Motors3/4HP/1PH/2-Wire Storm Water Pumps/Motors1HP/1PH/2-Wire Storm Water Pumps/Motors1-1/2HP/1 PH/2-Wire Storm Water Pumps/Motors

S-2081400 30' SEOW Round Jacketed Cable 16/3AWG w/ Ground

SUMOTO MOTORS ONLY1/2HP/1PH/3-Wire or 3PH Storm Water Pumps/Motors3/4HP/1PH/3-Wire or 3PH Storm Water Pumps/Motors1HP/1PH/3-Wire or 3PH Storm Water Pumps/Motors1-1/2HP/1PH/3-Wire or 3 PH Storm Water Pumps/Motors2HP/1PH or 3PH Storm Water Pumps/Motors3 HP/1PH or 3PH Storm Water Pumps/ Motors


FRANKLIN ELECTRIC MOTORS ONLY1-1/2HP/1PH or 3PH 316 SS Pumps/Motors2HP/1PH or 3PH 316 SS Pumps/Motors3 HP/1PH or 3PH 316 SS Pumps/Motors


10HP/1PH Storm Water Pumps/Motors15HP/3PH/200 or 230 Volt Storm Water Pumps/Motors


7-1/2HP/1PH Storm Water Pumps/Motors10HP/3PH/200 or 230Volt Storm Water Pumps/Motors


5HP/1PH Storm Water Pumps/Motors7-1/2HP/3PH/200 or 230 Volt Storm Water Pumps/Motors15HP/3PH/460 or 575 Volt Storm Water Pumps/Motors

60504 30' SEOW Round Jacketed Cable4/3 AWG w/ Ground

15HP/1PH Storm Water Pumps/Motors


10HP/1PH 316 SS Pumps/Motors15HP/3PH/200 or 230 Volt 316 SS Pumps/Motors


7-1/2HP/1PH 316 SS Pumps/Motors10HP/3PH/200 or 230 Volt 316 SS Pumps/Motors


5HP/1PH 316 SS Pumps/Motors7-1/2HP/3PH/200 or 230 Volt 316 SS Pumps/Motors15HP/3PH/460 or 575 Volt 316 SS Pumps/Motors


15HP/1PH 316 SS Pumps/Motors


5HP/3PH/460 or 575 Volt Storm Water Pumps/Motors7-1/2HP/3PH/460 or 575 Volt Storm Water Pumps/Motors


5HP/3PH/460 or 575 Volt 316 SS Pumps/Motors7-1/2HP/3PH/460 or 575 Volt 316 SS Pumps/Motors


5HP/3PH/200 or 230 Volt Storm Water Pumps/Motors10HP/3PH/460 or 575 Volt Storm Water Pumps/Motors


5HP/3PH/200 or 230 Volt 316 SS Pumps/Motors10HP/3PH/460 or 575 Volt 316 SS Pumps/Motors

* Special Leads and extra lengths are also available. Consult the factory for details.



SINGLE PHASE CONTROL PANELS

See Accessories section, page 36 for more details on the Franklin ElectricSingle Phase control panels. See page 25 for a complete list of replacementcomponents for standard control panels.

In addition, the following components are used in the Delux Single Phasecontrol panels and the Duplex Standard and Delux Single Phase controlpanels. See the Accessories Section, page 55 for more information on theDuplex Single Phase control panels.

Part # Description

150-814-902 Single Phase Lightning Arrestor

155-031-103 Relay for Single Phase, 208V

70-464-1 8 Pin Socket

750XBXM4L-120A Circuit Relay

ARX-2C-120A Duplex Alternating Relay

G3P-090 Pump Circuit Breaker

ICM203 Time Delay

KSR3.100 Disconnect with Handle



ML-GREEN Pump Run Light

SQD-ZB4BD2 Off-On Switch Only

SQD-ZB4BD8 Auto-Off-Test Switch Only

SQDZB4BZ103 2 NO Switch Contact Block

SQDZBE102 1 NC Switch Contact Block

QOU250 Pump Circuit Breaker

QUO260 Pump Circuit Breaker

VKA3125N Disconnect with Handle

VKA3160N Disconnect with Handle

WMZS1D05 Control Circuit Breaker, 1 POLE

WMZT2D08 Pump Circuit Breaker









SIN

GL

E P

HA

SE C

ON

TR

OL

PA

NE

L C

OM

PON

EN

TS

Con

trol

Pan

el

(1)

Mod

el #

HP

Cap

acito

rsO

verl

oad

(2) P

art #

Rel

ay (3

) P

art #

Con

tact

or (2

) Par

t#

Part

#M

fd U

nits

Vol

tsQ

ty.

282-

405-

501/

227

5-46

4-12

6 S

156-

362-

101

R43

-53

1022

037

01 1

275-

411-

114

S27

5-41

1-11

3 M

155-

031-

102

155-

325-

102

L

282-

407-

503/

427

5-46

4-10

5 S

156-

362-

102

R59

-71

1022

037

01 1

275-

411-

114

S27

5-41

1-11

3 M

155-

031-

102

155-

325-

102

L

282-

300-

811

or1-

1/2

275-

464-

113

S15

5-32

8-10

1 R

105-

126

1522

037

01 1

275-

411-

114

S27

5-41

1-11

3 M

155-

031-

102

155-

325-

102

L

282-

301-

832

275-

464-

113

S15

5-32

8-10

3 R

105-

126

2022

037

01 1

275-

411-

117

S27

5-41

1-11

3 M

155-

031-

102

155-

325-

102

L

282-

302-

833

275-

463-

123

S15

5-32

7-10

9 R

208-

250

4522

037

01 1

275-

411-

118

S27

5-41

1-11

5 M

155-

031-

102

155-

325-

102

L

282-

113-

93

527

5-46

8-11

9 S

155-

327-

114

R27

0-32

440

330

370

1 227

5-41

1-11

9 S

275-

406-

102

M15

5-03

1-60

115

5-32

6-10

1 L

282-

201-

93

7-1/

227

5-46

8-11

9 S

275-

468-

118

S15

5-32

7-10

9 R

270-

324

216-

259

45

330

330

370

1 1 1

275-

411-

102

S27

5-40

6-12

1 M

155-

031-

601

155-

326-

102

L

282-

202-

93

1027

5-46

3-12

0 S

275-

468-

118

S27

5-46

8-11

9 S

155-

327-

102

R

130-

154

216-

259

270-

324

35

330

330

330

370

1 1 1 2

275-

406-

103

S15

5-40

9-10

1 M

155-

031-

601

155-

326-

102

L

282-

203-

9315

275-

463-

122

S27

5-46

8-11

9 S

155-

327-

109

R

161-

193

270-

324

45

330

330

370

1 2 3

275-

406-

103

S15

5-40

9-10

2M15

5-03

1-60

115

5-42

9-10

1

5 th

ru 1

5 H

P C

ontro

l Pan

els a

lso

cont

ain

a lig

htni

ng a

rres

tor,

part

# 15

0-81

4-90

2.D

ELU

X C

ontro

l Pan

els h

ave

an A

uto-

Off

-Tes

t sw

itch,

par

t # S

QD

-ZB

4BD

8 an

d Sw

itch

Con

tact

Blo

ck, p

art #

SQ

DZB

4BZ1

03.



THREE PHASE CONTROL PANELS

See the Accessories section, page 47 for more details on the Three Phasecontrol panels, simplex (single pump), duplex, triplex and quadplex.

In addition, the following components are used in the Duplex Standard andDelux Three Phase control panels, the Triplex Standard and Delux ThreePhase control panels or the Quadplex Standard and Delux Three Phasecontrol panels. See the Accessories Section, page 54 for more informationon the multi pump Three Phase control panels.

THREE PHASE CONTROL PANEL REPLACEMENT COMPONENTS

Part # Description

155-440-902 Lightning Arrestor

ARX-2C-120A Duplex Alternating Relay

BW250JAGU-3P200SB 200 Amp Circuit Breaker w/ Handle

BW250JAGU-3P225SB 225 Amp Circuit Breaker w/ Handle

ICM203 Time Delay

KSR3.100 Disconnect w/ Handle




ML-GREEN Pump Run Light

SQD-ZB4BD2 Off-On Switch Only

SQD-ZB4BD8 Auto-Off-Test Switch Only

SQDZB4BZ103 2 NO Switch Contact Block

SQDZBE102 1 NC Contact Block

TIM271 Triplex Alternating Relay

TIMB471 Quadplex Alternating Relay

VKA3125N Disconnect w/ Handle

VKA3160N Disconnect w/ Handle

WMZS1D01 Control Circuit Breaker







TRANSFORMER

Description 200V 230V 460V 575V

Simplex or Duplex SQD9070T100D3or

PH100MGJ

SQD9070T100D1or

PH100MQMJ

SQD9070T100D1or

PH100MQMJ

SQD9070TF100D5w/ fuses EDCC-5 (2)

and EDCC-1 (1)

Triplex or Quadplex SQD9070T300D3or

PH350MGJ

SQD9070T300D1or

PH350MQMJ

SQD9070T300D1or

PH350MQMJ

SQD9070TF300D5w/ fuses EDCC-5 (2)

and EDCC-1 (1)

CIRCUIT BREAKER

HP 200V 230V 460V 575V*

1/2 HP WMZT3D05 WMZT3D05 WMZT3D03 N/A

3/4 HP WMZT3D06 WMZT3D06 WMZT3D03 N/A

1 HP WMZT3D07 WMZT3D07 WMZT3D04 N/A

1-1/2 HP WMZT3D10 WMZT3D08 WMZT3D05 EDCC4

2 HP WMZT3D13 WMZT3D10 WMZT3D06 EDCC5



7-1/2 HP WMZT3D40 WMZT3D32 WMZT3D16 EDCC15

10HP BW125JAGU-3P050SB

WMZT3D40 WMZT3D20 EDCC20

15 HP BW125JAGU-3P060SB

BW125JAGU-3P060SB

WMZT3D30 EDCC25

* Note: 575V Controls do not use a Circuit Breaker. They use a Fuse Block, part # CHCC3D andthree fuses instead. See above for fuse part numbers.



CONTACTOR AND OVERLOAD

HP 200V 230V 460V 575V

1/2 HPCONTACTOR GH15BN-3-10A GH15BN-3-10A GH15BN-3-10A N/A

OVERLOAD RTD32-400 RTD32-400 RTD32-180 N/A

3/4 HPCONTACTOR GH15BN–3-10A GH15BN-3-10A GH15BN-3-10A N/A


1HPCONTACTOR GH15BN-3-10A GH15BN-3-10A GH15BN-3-10A N/A


1-1/2 HPCONTACTOR GH15BN-3-10A GH15BN-3-10A GH15BN-3-10A GH15BN-3-10A

OVERLOAD RTD32-900 RTD32-600 RTD32-400 RTD32-270

2 HPCONTACTOR GH15CN-3-10A GH15BN-3-10A GH15BN-3-10A GH15BN-3-10A


3 HPCONTACTOR GH15DN-3-10A GH15CN-3-10A GH15BN-3-10A GH15BN-3-10A


5 HPCONTACTOR GH15ET-3-00A GH15ET-3-00A GH15BN-3-10A GH15BN-3-10A


7-1/2 HPCONTACTOR GH15FT-3-00A GH15ET-3-00A GH15DN-3-10A GH15CN-3-10A


10 HPCONTACTOR GH15GT-3-00A GH15GT-3-00A GH15ET-3-00A GH15DN-3-10A


15 HPCONTACTOR GH15JT-3-00A GH15HT-3-00A GH15ET-3-00A GH15ET-3-00A




VARIABLE FREQUENCY DRIVE PACKAGES

Each Variable Frequency Drive package consists of a DriveUnit that has been pre-programmed for the specifichorsepower, phase and voltage; a standard transducer todetermine the water level and control the operation of thedrive; either a single phase or three phase lightning arrestor tobe installed in the field; and a flow sensor to be used as asafety shut off devise. Each Drive unit may have multiplehorsepower applications. Each flow sensor is connected toeither a 4", 6" or 8" PVC saddle for installation on thedischarge piping. The flow sensors listed are the standard,other sizes can be requested.

VFD PackagePart #: Description: Drive Unit #:

LightningArrestor #: Flow Sensor #:

400-VFD-123 1HP - 1PH/115V in and 3PH/230V out X5C1S010C09 150-814-902 4" Flow Sensor

400-VFD-320 1HP - 3PH/200V in and 3PH/200V out X5C20020C09 155-440-902 4" Flow Sensor


400-VFD-146 1 HP - 1PH/460V in and 3PH/460V out X5C40030C09 150-814-902 4" Flow Sensor


401-VFD-123 1-1/2 HP - 1PH/230V in and 3PH/230V out X5C20030C09 150-814-902 4" Flow Sensor


401-VFD-323 1–1/2 HP - 3PH/230V in and 3PH/230V out X5C20020C09 155-440-902 4" Flow Sensor

VFD Drive Unit

Flow Sensor with8" PVC Saddle

StandardTransducerLightning Arrestor



VFD PackagePart #: Description: Drive Unit #:

LightningArrestor #: Flow Sensor #:








403-VFD-123 3 HP - 1PH/230V in and 3PH/230V out X5C2S050C 150-814-902 6" Flow Sensor










607-VFD-123 7-1/2 HP - 1PH/230V in and 3PH/230V out X5C2S100C 150-814-902 8" Flow Sensor










615-VFD-320 15 HP - 3PH/200V in and 3PH/200V out X5C20200C 155-440-902 8" Flow Sensor





4" DISCHARGE PUMPEXPLODED VIEW

VERTICALSTAINLESSSTEEL PUMPS

Item# 1 2 3 4 5 6 7 7 8 91011

Description:Recuperator - See page 37.SS Hex Head Bolt: 5/16"- 18 x 3/4"SS Lock Washer: 5/16" StandardImpeller - See page 37.Lead - See page 22.Motor -See page 1.SS Cord Guard ClampTie StrapSS Hex Head Nut: 5/16"- 24Pump Shell - Contact factory.Urethane Base PadSS Hex Head Bolt: 5/16"- 18 x 1-3/4"

Qty:118111114133

Part Number:401055020150202- - -- - -- - -40203- - - 40204---5012250218

Construction Materials:303/316 SS Casting304/316 SS304/316 SS303/316 SS Casting---Franklin Electric/Sumoto316 SSPlastic304/316 SS303/316 SSBuna Urethane304/316 SS

The above components are available for replacement on your 4" Discharge vertical Carry Stainless SteelAxial-Flow Submersible pumps.

3

1

9

3

7

7

10

11

2

4

6

5

3

8



6" EXTREME PUMP - EXPLODED VIEW

VERTICALSTAINLESSSTEEL PUMPS

Item# 1 2 3 4 5 6 7 8 9 9101112131415

Description:Recuperator - See page 37.O’RingSocket Head Cap Screw: 1/4"- 20 x 3/4" or 1/2"Lifting BracketImpeller - #1 or 2, See page 37.Socket Head Cap Screw: 5/16"-18x3/4" Socket Head Lockwasher: 5/16"Lead - See page 22.SS Cord Guard ClampTie StrapMotor - See page 1.SS Hex Head Nut: 5/16"- 24SS Lock Washer: 5/16"Pump Shell - Contact factory.Urethane Base PadSS Hex Head Bolt: 5/16"- 18 x 1-3/4"

Qty:1182111111147133

Part Number:45105OR-260BN7050223/5022440240- - -5022650225- - - 40203- - -- - -4020450202- - - 5012250218

ConstructionMaterials:303/316 SS CastingBuna304/316 SS303/316 SS303/316 SS Casting304/316 SS304/316 SS- - - 316 SSPlasticFranklin/Sumoto304/316 SS304/316 SS303/316 SSBuna Urethane304/316 SS

The above components are available for replacement on your 6" Discharge Extreme vertical Carry StainlessSteel Axial-Flow Submersible pumps. Extreme pumps are currently not available, consult factory for details.

8

1

9

3

7

9

10

11

2

4

6

5

12

13

12

14

15



6" DISCHARGE PUMPEXPLODED VIEW

VERTICALSTAINLESS STEEL PUMPS

Item# 1 2 3 4 5 6 7 7 8 91011111212

Description:Recuperator - See page 37.SS Hex Head Bolt: 5/16"-18 x 3/4"SS Lock Washer: 5/16" StandardImpeller - See Page 37.Lead - See page 22.Motor - See page10.SS Cord Guard ClampCable TieSS Hex Head Bolt: 1/2"-20 x 1"SS Lock Washer: 1/2" StandardPump Shell: Contact factory.Urethane Base PadSpacer BlockSS Hex Head Bolt: 5/16"-18 x 1-3/4"SS Hex Head Bolt: 5/16"-18 x 3-1/2"

Qty:114111114413333

PartNumber:601055020150202- - -- - -- - -60201- - -6020560206- - -5013250113X5021850216

ConstructionMaterials:303/316 SS Casting304/316 SS304/316 SS303/316 SS Casting- - -Franklin Electric316 SSPlastic304/316 SS304/316 SS303/316 SS Buna UrethaneUHMW304/316 SS304/316 SS

The above components are available for replacement on your 6" Discharge vertical Carry Stainless SteelAxial-Flow Submersible pumps.

1

3

2

3

11

10

9

8

7

7

6

5

4

12



4" DISCHARGE PUMP - EXPLODED VIEW

HORIZONTAL STAINLESS STEEL PUMPS

Item#12345677891010111112

Description:Recuperator - See page 37.SS Hex Head Bolt: 5/16"- 18 x 3/4"SS Lock Washer: 5/16"-StandardImpeller - See page 37.Lead - See page 22.Motor - See page 1.SS Cord Guard StrapCable TieSS Hex Head Nut: 5/16"-24Pump Shell - Contact factory.Urethane Base PadUrethane Base PadSS Hex Head Bolt: 5/16"-18 x 1" (front feet)SS Hex Head Bolt: 5/16"-18 x 1-3/4" (back)Base Pad Mounting Bracket

Qty:124111114112211

Part Number:401055020150202- - -- - -- - -40203- - - 40204- - - 5011250132502145021840209

ConstructionMaterials:303/316 SS Casting304/316 SS304/316 SS303/316 SS Casting- - -Franklin/Sumoto316 SSPlastic304/316 SS303/316 SSBuna UrethaneBuna Urethane304/316 SS304/316 SS304/316 SS

The above components are available for replacement on your 4" horizontal Carry Stainless Steel Axial-FlowSubmersible pumps.

9

11

3

1

3

2

47

63

5

7

8

10

12



6" EXTREME PUMP - EXPLODED VIEW

HORIZONTAL STAINLESS STEEL PUMPS

Item# 1 2 3 4 5 6 7 8 9 9101112131415151616

Description:Recuperator - See page 37.O’RingSocket Head Cap Screw: 1/4"- 20 x 3/4" or 1/2"Lifting BracketImpeller - #1 or 2, See page 37.Socket Head Cap Screw: 5/16"-18x3/4" Socket Head Lockwasher: 5/16"Lead - See page 22.SS Cord Guard ClampTie StrapMotor - See page 1.SS Hex Head Nut: 5/16"- 24SS Lock Washer: 5/16"Pump Shell - Contact factory.Mounting BracketUrethane Base PadUrethane Base PadSS Hex Head Bolt: 5/16"- 18 x 1"SS Hex Head Bolt: 5/16" - 18 x 3"

Qty:1182111111147111221

Part Number:45105OR-260BN7050223/5022440240- - -5022650225- - - 40203- - -- - -4020450202- - - 4020950112501325021450208

ConstructionMaterials:303/316 SS CastingBuna304/316 SS303/316 SS303/316 SS Casting304/316 SS304/316 SS- - - 316 SSPlasticFranklin/Sumoto304/316 SS304/316 SS303/316 SS304/316 SSBuna UrethaneBuna Urethane304/316 SS304/316 SS

The above components are available for replacement on your 6" Extreme horizontal Carry Stainless Steel Axial-Flow Submersible pumps. Extreme pumps are currently not available, consult factory for details.

1

13

15

1612

1211

10

99

8

7

6

5

4

3

2

14



6" DISCHARGE PUMP - EXPLODED VIEW

HORIZONTALSTAINLESSSTEEL PUMPS

Item#123456778910111112131314

Description:Recuperator - See page 37.SS Hex Head Bolt: 5/16"- 18 x 3/4"SS Lock Washer: 5/16"-StandardImpeller - See page 37.Lead - See page 22.Motor - See page 10.SS Cord Guard StrapCable TieSS Hex Head Bolt: 1/2"- 20 x 1"SS Lock Washer: 1/2" StandardPump Shell - Contact factory.Urethane Base PadUrethane Base PadSpacer Block: (7-1/2, 10 or 15 HP only)SS Hex Head Bolt: 5/16"- 18 x 1-3/4" or 3-1/2"SS Hex Head Bolt: 5/16"- 18 x 1" or 3"Base Pad Mounting Bracket

Qty:11511111441224221

Part Number:601055020150202- - -- - -- - -60201- - - 6020560206- - - 501125013250113C50218/5021350214/5020860209

ConstructionMaterials:303/316 SS Casting304/316 SS304/316 SS303/316 SS Casting- - - Franklin Electric316 SSPlastic304/316 SS304/316 SS303/316 SSBuna UrethaneBuna UrethaneUHMW304/316 SS304/316 SS304/316 SS

The above components are available for replacement on your 6" Discharge horizontal Carry StainlessSteel Axial-Flow Submersible pumps.

3

133

1211

109

8

77

6

5

421

14



STAINLESS STEEL CASTINGS

The following are replacement components forStainless Steel Axial-Flow Submersible pumps.

RECUPERATORSRecuperators are composed of 303 or 316 Stainless Steel,CNC machined with Male NPT Standard threads. Thesehave left-handed threads. Please use caution whenremoving or replacing a recuperator on your CarryStainless Steel Axial-Flow Submersible pump.

Part # Description Application

40105 4" Recuperator 4" Storm or 316 SS Pumps

45105 Extreme Recuperator Extreme Storm or 316 SS Pumps

60105 6" Recuperator 6" Storm or 316SS Pumps

IMPELLERSImpellers are composed of 303 or 316 Stainless Steel, CNCmachined, broached and dynamically balanced. Replacing yourcurrent impeller with a higher numbered impeller can increaseyour pumping volume. For instance: replacing a No. 1Impeller on your 1 HP Storm water pump with a No. 2 Impellercan increase your pumping volume from 170 GPM to 310 GPMat a TDH of 6'.


40101 4" No. 1 Impeller 4" 1/2, 3/4, or 1 HP Storm Pumps

40102 4" No. 2 Impeller 4" 1 HP Storm Pumps

461-13 4" 13o 4-Blade Impeller 4" 1-1/2, 2 or 3 HP Storm or 316 SS Pumps



45101 Extreme X1 Impeller Extreme 2HP or 3HP Storm or 316 SS Pumps

45102 Extreme X2 Impeller Extreme 3HP Storm or 316 SS Pumps

60101 6" No. 1 Impeller 6" 5 or 7-1/2 HP Storm or 316 SS Pumps

60102 6" No. 2 Impeller 6" 5 or 7-1/2 HP Storm or 316 SS Pumps

60103 6" No. 3 Impeller 6" 7-1/2 or 10 HP Storm or 316 SS Pumps

60104 6" No. 4 Impeller 6" 7-1/2 or 10 HP Storm or 316 SS Pumps

60104+ 6" No. 4 Impeller 6" 15 HP Storm or 316 SS Pumps



MISCELLANEOUS COMPONENTS

The following items are available for replacement onyour 4" , Extreme or 6" Submersible pumps. Pleaserefer to the diagrams on pages 31 thru 36.


OR-260BN70 O’Ring All Extreme Pumps

40203 4" Stainless Steel Cord Guard Clamp All 4" Submersible Motors

40204 SS Hex Head Nuts: 5/16"- 24 All 4" Franklin Submersible Motor mounts

40240 Lifting Brackets All Extreme Pumps

50112 Urethane Base Pads All 4" and Extreme Horizontal Submersible Pumps

50122 Urethane Base Pads All 4" and Extreme Vertical Submersible Pumps

50132 Urethane Base Pads All 6" Submersible Pumps

50113-Custom Spacer Blocks Submersible Pumps Spacers or Screen Pads

50201 SS Hex Head Bolts: 5/16"- 18 x 3/4" All Submersible Pump Impellers

50202 SS Lock Washers: 5/16" Standard All Submersible Pump Impellers and Base Pads4" Submersible Pump Motor mounts

50208 SS Hex Head Bolts: 5/16" - 18 x 3" 7-1/2, 10 or 15 HP Horizontal Pump Base Pads

50211 SS Hex Head Bolts: 5/16" - 18 x 2-1/4" 3 HP Horizontal Pumps w/ Horns Base Pads

50213 SS Hex Head Bolts: 5/16" -18 x 3-1/2" 6" Horizontal Pumps

50214 SS Hex Head Bolts: 5/16" - 18 x 1" All 4" Horizontal Pump Base Pads

50216 SS Hex Head Bolts: 5/16" - 18 x 3-1/2" 7-1/2, 10 or 15 HP Vertical Pump Base Pads

50217 SS Hex Head Bolts: 5/16" - 18 x 4" All 4" Vertical Pumps w/ Screen Base Pads

50218 SS Hex Head Bolts: 5/16" - 18 x 1-3/4" All 4" Submersible Pumps

50223 SS Socket Cap Screw: 1/4"-20x3/4" All Extreme Pumps


50225 SS Socket Cap Lockwasher: 5/16" All Extreme Pumps


60201 6" Stainless Steel Cord Guard Clamp All 6" Submersible Pumps/Motors

60205 SS Hex Head Bolts: 1/2"- 20 x 1" All 6" Submersible Pump Motor mounts

60206 SS Lock Washers: 1/2" Standard All 6" Submersible Pump Motor mounts



400 Series Replacement Motors

1/2 HP, SINGLE PHASE, 115 VOLTPART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.

244-50490 4" Super SS Franklin Electric, 2-Wire Motor 450.00 18SM-61653050 4" OP4 Sumoto, 2-Wire Motor 450.00 16


214-50590 4" Super SS Franklin Electric, 3-Wire Motor 390.00 18244-50590 4" Super SS Franklin Electric, 2-Wire Motor 450.00 18SM-61650060 4" OP4 Sumoto, 2-Wire Motor 450.00 16


214-50706 4" 600M Series Franklin Electric, 3-Wire Motor 620.00 21214-50790 4" Super SS Franklin Electric, 3-Wire Motor 465.00 21244-50790 4" Super SS Franklin Electric, 2-Wire Motor 545.00 21SM-61650080 4" OP4 Sumoto, 2-Wire Motor 545.00 17

1 HP, SINGLE PHASE, 230 VOLTPART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.

214-50806 4" 600M Series Franklin Electric, 3-Wire Motor 650.00 24214-50890 4" Super SS Franklin Electric, 3-Wire Motor 485.00 24244-50890 4" Super SS Franklin Electric, 2-Wire Motor 580.00 24SM-61650130 4" OP4 Sumoto, 2-Wire Motor 580.00 20

1/2 HP, THREE PHASEPART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.

234-50192 4" Super SS Franklin Electric, 200 Volt Motor 415.00 18234-51192 4" Super SS Franklin Electric, 230 Volt Motor 415.00 18SM-61670040 4" OP4 Sumoto, 230 Volt Motor 415.00 15234-52194 4" Super SS Franklin Electric, 460 Volt Motor 415.00 18SM-61530040 4" OP4 Sumoto, 460 Volt Motor 415.00 15

3/4 HP, THREE PHASEPART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.

234-50292 4" Super SS Franklin Electric, 200 Volt Motor 450.00 21234-51206 4" 600M Series Franklin Electric, 230 Volt Motor 625.00 21234-51292 4" Super SS Franklin Electric, 230 Volt Motor 450.00 21SM-61620080 4" OP4 Sumoto, 230 Volt Motor 450.00 16234-52206 4" 600M Series Franklin Electric, 460 Volt Motor 625.00 21234-52294 4" Super SS Franklin Electric, 460 Volt Motor 450.00 21SM-61530080 4" OP4 Sumoto, 460 Volt Motor 450.00 16

1 HP, THREE PHASEPART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.

234-50392 4" Super SS Franklin Electric, 200 Volt Motor 495.00 24234-51306 4" 600M Series Franklin Electric, 230 Volt Motor 655.00 24234-51392 4" Super SS Franklin Electric, 230 Volt Motor 495.00 24SM-61620120 4" OP4 Sumoto, 230 Volt Motor 495.00 17234-52306 4" 600M Series Franklin Electric, 460 Volt Motor 655.00 24234-52394 4" Super SS Franklin Electric, 460 Volt Motor 495.00 24SM-61680120 4" OP4 Sumoto, 460 Volt Motor 495.00 17

800-49-CARRY Replacements - P1 Effective 02/01/13



1-1/2 HP, SINGLE PHASE, 230 VOLTPART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.

224-30006 4" 600M Series Franklin Electric, 3-Wire Motor 750.00 29224-30085 4" High Thrust Franklin Electric, 316 SS Motor 2,805.00 40224-30092 4" Super SS Franklin Electric, 3-Wire Motor 620.00 29244-30990 4" Super SS Franklin Electric, 2-Wire Motor 760.00 32SM-61650160 4" OP4 Sumoto, 2-Wire Motor 760.00 23

1-1/2 HP, THREE PHASEPART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.

234-50485 4" High Thrust Franklin Electric, 200 Volt, 316 SS Motor 2,755.00 35234-50492 4" Super SS Franklin Electric, 200 Volt Motor 560.00 24234-51406 4" 600M Series Franklin Electric, 230 Volt Motor 695.00 24234-51485 4" High Thrust Franklin Electric, 230 Volt, 316 SS Motor 2,755.00 35234-51492 4" Super SS Franklin Electric, 230 Volt Motor 560.00 24SM-61620160 4" OP4 Sumoto, 230 Volt Motor 560.00 20234-52406 4" 600M Series Franklin Electric, 460 Volt Motor 695.00 24234-52485 4" High Thrust Franklin Electric, 460 Volt, 316 SS Motor 2,755.00 35234-52494 4" Super SS Franklin Electric, 460 Volt Motor 560.00 24SM-61680160 4" OP4 Sumoto, 460 Volt Motor 560.00 20234-53485 4" High Thrust Franklin Electric, 575 Volt, 316 SS Motor 2,755.00 35234-53494 4" Super SS Franklin Electric, 575 Volt Motor 560.00 24


2 HP, SINGLE PHASE, 230 VOLTPART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.

224-30106 4" 600M Series Franklin Electric Motor 830.00 32224-30185 4" High Thrust Franklin Electric, 316 SS Motor 2,900.00 44224-30187 4" High Thrust Franklin Electric, Oil Stripper Motor 3,025.00 50224-30192 4" Super SS Franklin Electric Motor 700.00 32

2 HP, THREE PHASEPART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.

234-30585 4" High Thrust Franklin Electric, 200 Volt, 316 SS Motor 2,810.00 40234-30592 4" Super SS Franklin Electric, 200 Volt Motor 610.00 29234-31506 4" 600M Series Franklin Electric, 230 Volt Motor 750.00 29234-31585 4" High Thrust Franklin Electric, 230 Volt, 316 SS Motor 2,810.00 40234-31587 4" High Thrust Franklin Electric, 230 Volt, Oil Stripper Motor 2,935.00 46234-31592 4" Super SS Franklin Electric, 230 Volt Motor 610.00 29SM-61620210 4" OP4 Sumoto, 230 Volt Motor 610.00 23234-32506 4" 600M Series Franklin Electric, 460 Volt Motor 750.00 29234-32585 4" High Thrust Franklin Electric, 460 Volt, 316 SS Motor 2,810.00 40234-32587 4" High Thrust Franklin Electric, 460 Volt, Oil Stripper Motor 2,935.00 46234-32594 4" Super SS Franklin Electric, 460 Volt Motor 610.00 29SM-61530200 4" OP4 Sumoto, 460 Volt Motor 610.00 23234-33585 4" High Thrust Franklin Electric, 575 Volt, 316 SS Motor 2,810.00 40234-33594 4" Super SS Franklin Electric, 575 Volt Motor 610.00 29




3 HP, SINGLE PHASE, 230 VOLT

PART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.224-30206 4" 600M Series Franklin Electric Motor 1,245.00 46224-30226 4" High Thrust Franklin Electric Motor 1,125.00 46224-30285 4" High Thrust Franklin Electric, 316 SS Motor 3,155.00 55224-30287 4" High Thrust Franklin Electric, Oil Stripper Motor 3,330.00 56

3 HP, THREE PHASE

PART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.234-30626 4" High Thrust Franklin Electric, 200 Volt Motor 900.00 35234-30685 4" High Thrust Franklin Electric, 200 Volt, 316 SS Motor 3,010.00 44234-31606 4" 600M Series Franklin Electric, 230 Volt Motor 1,035.00 35234-31626 4" High Thrust Franklin Electric, 230 Volt Motor 900.00 35234-31685 4" High Thrust Franklin Electric, 230 Volt, 316 SS Motor 3,010.00 44234-31687 4" High Thrust Franklin Electric, 230 Volt Oil Stripper Motor 3,135.00 50SM-61620260 4" OP4 Sumoto, 230 Volt Motor 900.00 32234-32606 4" 600M Series Franklin Electric, 460 Volt Motor 1,035.00 35234-32626 4" High Thrust Franklin Electric, 460 Volt Motor 900.00 35234-32685 4" High Thrust Franklin Electric, 460 Volt, 316 SS Motor 3,010.00 44234-32687 4" High Thrust Franklin Electric, 460 Volt Oil Stripper Motor 3,135.00 50SM-61530255 4" OP4 Sumoto, 460 Volt Motor 900.00 32234-33626 4" High Thrust Franklin Electric, 575 Volt Motor 900.00 35234-33685 4" High Thrust Franklin Electric, 575 Volt, 316 SS Motor 3,010.00 44



PART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.226-11039 Super 6" Franklin Electric, 316 SS Motor 3,400.00 112226-11080 Super 6" Franklin Electric Sand Fighter Motor 2,025.00 110226-11090 Super 6" Franklin Electric Motor 1,980.00 112

5 HP, THREE PHASE

PART NUMBER: PRODUCT DESCRIPTION: * LIST PRICE: WT.236-60040 Super 6" Franklin Electric, 230 Volt, 316 SS Motor 3,350.00 103236-60081 Super 6" Franklin Electric 230 Volt Sand Fighter Motor w/ Subtrol 1,930.00 101236-60090 Super 6" Franklin Electric, 230 Volt Motor 1,880.00 101236-65040 Super 6" Franklin Electric, 200 Volt, 316 SS Motor 3,350.00 103236-65081 Super 6" Franklin Electric 200 Volt Sand Fighter Motor w/ Subtrol 1,930.00 101236-65090 Super 6" Franklin Electric, 200 Volt Motor 1,880.00 101236-61040 Super 6" Franklin Electric, 460 Volt, 316 SS Motor 3,350.00 103236-61081 Super 6" Franklin Electric 460 Volt Sand Fighter Motor w/ Subtrol 1,930.00 101236-61090 Super 6" Franklin Electric, 460 Volt Motor 1,880.00 101236-62040 Super 6" Franklin Electric, 575 Volt, 316 SS Motor 3,350.00 103236-62081 Super 6" Franklin Electric 575 Volt Sand Fighter Motor w/ Subtrol 1,930.00 101236-62090 Super 6" Franklin Electric 575 Volt Motor 1,880.00 101* All 6" Three Phase Sand Fighter and 316 Stainless Steel Motors are Subtrol equipped.




7-1/2 HP, SINGLE PHASE, 230 VOLT


7-1/2 HP, THREE PHASE

PART NUMBER: PRODUCT DESCRIPTION: * LIST PRICE: WT.236-60140 Super 6" Franklin Electric, 230 Volt, 316 SS Motor 3,665.00 110236-60181 Super 6" Franklin Electric 230 Volt Sand Fighter Motor w/ Subtrol 2,245.00 108236-60190 Super 6" Franklin Electric, 230 Volt Motor 2,200.00 108236-65140 Super 6" Franklin Electric, 200 Volt, 316 SS Motor 3,665.00 110236-65181 Super 6" Franklin Electric 200 Volt Sand Fighter Motor w/ Subtrol 2,245.00 108236-65190 Super 6" Franklin Electric, 200 Volt Motor 2,200.00 108236-61140 Super 6" Franklin Electric 460 Volt, 316 SS Motor 3,665.00 110236-61181 Super 6" Franklin Electric 460 Volt Sand Fighter Motor w/ Subtrol 2,245.00 108236-61190 Super 6" Franklin Electric 460 Volt Motor 2,200.00 108236-62140 Super 6" Franklin Electric 575 Volt, 316 SS Motor 3,665.00 110236-62181 Super 6" Franklin Electric 575 Volt Sand Fighter Motor w/ Subtrol 2,245.00 108236-62190 Super 6" Franklin Electric, 575 Volt Motor 2,200.00 108* All 6" Three Phase Sand Fighter and 316 Stainless Steel Motors are Subtrol equipped.




10 HP, THREE PHASE

PART NUMBER: PRODUCT DESCRIPTION: * LIST PRICE: WT.236-60240 Super 6" Franklin Electric, 230 Volt, 316 SS Motor 3,930.00 118236-60281 Super 6" Franklin Electric 230 Volt Sand Fighter Motor w/ Subtrol 2,515.00 116236-60290 Super 6" Franklin Electric, 230 Volt Motor 2,460.00 116236-65240 Super 6" Franklin Electric, 200 Volt, 316 SS Motor 3,930.00 118236-65281 Super 6" Franklin Electric 200 Volt Sand Fighter Motor w/ Subtrol 2,515.00 116236-65290 Super 6" Franklin Electric, 200 Volt Motor 2,460.00 116236-61240 Super 6" Franklin Electric, 460 Volt, 316 SS Motor 3,930.00 118236-61281 Super 6" Franklin Electric 460 Volt Sand Fighter Motor w/ Subtrol 2,515.00 116236-61290 Super 6" Franklin Electric, 460 Volt Motor 2,460.00 116236-62240 Super 6" Franklin Electric, 575 Volt, 316 SS Motor 3,930.00 118236-62281 Super 6" Franklin Electric 575 Volt Sand Fighter Motor w/ Subtrol 2,515.00 116236-62290 Super 6" Franklin Electric, 575 Volt Motor 2,460.00 116* All 6" Three Phase Sand Fighter and 316 Stainless Steel Motors are Subtrol equipped.






15 HP, THREE PHASE

PART NUMBER: PRODUCT DESCRIPTION: * LIST PRICE: WT.236-60340 Super 6" Franklin Electric, 230 Volt, 316 SS Motor 4,305.00 131236-60381 Super 6" Franklin Electric 230 Volt Sand Fighter Motor w/ Subtrol 2,890.00 129236-60390 Super 6" Franklin Electric, 230 Volt Motor 2,835.00 129236-65340 Super 6" Franklin Electric, 200 Volt, 316 SS Motor 4,305.00 131236-65381 Super 6" Franklin Electric 200 Volt Sand Fighter Motor w/ Subtrol 2,890.00 129236-65390 Super 6" Franklin Electric, 200 Volt Motor 2,835.00 129236-61340 Super 6" Franklin Electric, 460 Volt, 316 SS Motor 4,305.00 131236-61381 Super 6" Franklin Electric 460 Volt Sand Fighter Motor w/ Subtrol 2,890.00 129236-61390 Super 6" Franklin Electric, 460 Volt Motor 2,835.00 129236-62340 Super 6" Franklin Electric, 575 Volt, 316 SS Motor 4,305.00 131236-62381 Super 6" Franklin Electric 575 Volt Sand Fighter Motor w/ Subtrol 2,890.00 129236-62390 Super 6" Franklin Electric, 575 Volt Motor 2,835.00 129* All 6" Three Phase Sand Fighter and 316 Stainless Steel Motors are Subtrol equipped.

MOTOR LEADS

PART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.40501 30' SEOW Round Jacketed Motor Lead - 14/2 AWG with Ground 95.40 840502 30' SEOW Round Jacketed Motor Lead - 14/3 AWG with Ground 111.30 8S-20801300 30' SEOW Round Jacketed Motor Lead - 16/2 AWG with Ground 100.00 8S-20801400 30' SEOW Round Jacketed Motor Lead - 16/3 AWG with Ground 110.00 840503 30' SEOW Round Jacketed Motor Lead - 14/3 AWG with Ground 127.20 860501 30' SEOW Round Jacketed Motor Lead - 6/3 AWG with Ground 316.94 1560502 30' SEOW Round Jacketed Motor Lead - 8/3 AWG with Ground 243.80 1260503 30' SEOW Round Jacketed Motor Lead - 10/3 AWG with Ground 169.60 1060504 30' SEOW Round Jacketed Motor Lead - 4/3 AWG with Ground 377.98 1760505 30' SEOW Round Jacketed Motor Lead - 6/3 AWG with Ground 348.74 1560506 30' SEOW Round Jacketed Motor Lead - 8/3 AWG with Ground 275.60 1260507 30' SEOW Round Jacketed Motor Lead - 10/3 AWG with Ground 201.40 1060508 30' SEOW Round Jacketed Motor Lead - 4/3 AWG with Ground 402.00 1760509 30' SEOW Round Jacketed Motor Lead - 14/3 AWG with Ground 131.30 860510 30' SEOW Round Jacketed Motor Lead - 14/3 AWG with Ground 147.20 860511 30' SEOW Round Jacketed Motor Lead - 12/3 AWG with Ground 131.30 1060512 30' SEOW Round Jacketed Motor Lead - 12/3 AWG with Ground 245.00 10* Warranty on replacement motors is void if not accompanied by a replacement lead.



SINGLE PHASE CONTROL PANELREPLACEMENT PARTS

PART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.150-814-902 Single Phase Lightning Arrestor 56.00 0.5155-031-102 Relay (1/2 - 3 HP) 63.28 0.5155-031-103 Relay for Single Phase, 208V (1/2 - 3 HP) 63.28 0.5155-031-601 Relay (5-15 HP) 81.88 0.5155-031-602 Relay for Single Phase, 208V (5-15 HP) 81.60 0.5155-325-102 Line Contactor (1/2 - 3 HP) 57.00 0.5155-326-101 Line Contactor (5 HP) 89.00 0.5155-326-102 Line Contactor (7-1/2 and 10 HP) 215.50 0.5155-327-102 Run Capacitor (10 HP) 48.78 0.5155-327-109 Run Capacitor (3, 7-1/2 and 15 HP) 55.66 0.5155-327-114 Run Capacitor (5 HP) 43.61 0.5155-328-101 Run Capacitor (1-1/2 HP) 30.22 0.5155-328-103 Run Capacitor (2 HP) 36.27 0.5155-409-101 Main Overload Relay (10 HP) 204.08 0.5155-409-102 Main Overload Relay (15 HP) 204.08 0.5155-429-101 Line Contactor (15 HP) 694.13 5.0156-362-101 Run Capacitor (1/2 HP) 28.51 0.5156-362-102 Run Capacitor (3/4 and 1 HP) 48.39 0.5275-406-102 Main Overload Relay (5 HP) 36.80 0.5275-406-103 Start Overload Relay (10 and 15 HP) 36.80 0.5275-406-121 Main Overload Relay (7-1/2 HP) 36.80 0.5275-411-102 Start Overload Relay (7 1/2 HP) 15.82 0.5275-411-107 Start Overload Relay (Older Boxes) 14.63 0.5275-411-108 Start Overload Relay (Older Boxes) 14.63 0.5275-411-113 Main Overload Relay (1/2, 3/4, 1 and 1-1/2 HP) 19.68 0.5275-411-114 Start Overload (1/2, 3/4, 1 and 1-1/2 HP) 16.72 0.5275-411-115 Main Overload Relay (3 HP) 15.02 0.5275-411-117 Start Overload (2 HP) 14.74 0.5275-411-118 Start Overload (3 HP) 16.05 0.5275-411-119 Start Overload (5 HP) 16.23 0.5275-463-111 Start Capacitor (3 HP) 53.05 0.5275-463-120 Start Capacitor (10 HP) 59.04 0.5275-463-122 Start Capacitor (15 HP) 59.09 0.5275-463-123 Start Capacitor (3 HP) 55.70 0.5275-464-105 Start Capacitor (3/4 HP) 30.73 0.5275-464-113 Start Capacitor (1, 1-1/2 and 2 HP) 36.69 0.5275-464-118 Start Capacitor (Older Boxes) 35.42 0.5275-464-126 Start Capacitor (1/2 HP) 30.12 0.5275-468-118 Start Capacitor (7-1/2 and 10 HP) 69.44 0.5275-468-119 Start Capacitor (5 - 15 HP) 101.47 0.5275-468-120 Start Capacitor (Older Boxes) 101.47 0.5



PART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.70-464-1 8 Pin Socket 5.00 0.1750BXM4L-120A Circuit Relay 18.00 0.1ARX-2C-120A Duplex Alternating Relay 57.00 0.5G3P-090 Pump Circuit Breaker 365.00 0.5ICM203 Time Delay 26.40 0.1JMK2P-I Circuit Relay 18.00 0.1KSR3.100 ASSEMBLY Disconnect with Handle 114.00 0.5KSR3.40 ASSEMBLY Disconnect with Handle 68.00 0.5KSR3.60 ASSEMBLY Disconnect with Handle 74.00 0.5ML-GREEN Pump Run Light 32.86 0.5QOU250 Pump Circuit Breaker 100.00 0.5QOU260 Pump Circuit Breaker 100.00 0.5SQD-ZB4BD2 On-Off Switch Only 20.00 0.1SQD-ZB4BD8 Auto-Off-Test Switch Only 25.00 0.1SQDZB4BZ103 2 NO Contact Block 30.00 0.5SQDZBE102 1 NC Contact Block 22.00 0.5VKA3125N Disconnect with Handle 213.00 0.5VKA3160N Disconnect with Handle 354.00 0.5WMZS1D05 Control Circuit Breaker, 1 POLE 19.08 0.5WMZT2D08 Pump Circuit Breaker, 2 POLE 80.00 0.5WMZT2D10 Pump Circuit Breaker, 2 POLE 80.00 0.5WMZT2D13 Pump Circuit Breaker, 2 POLE 80.00 0.5WMZT2D15 Pump Circuit Breaker, 2 POLE 80.00 0.5WMZT2D16 Pump Circuit Breaker, 2 POLE 80.00 0.5WMZT2D20 Pump Circuit Breaker, 2 POLE 80.00 0.5WMZT2D32 Pump Circuit Breaker, 2 POLE 80.00 0.5

SINGLE PHASE CONTROL PANELREPLACEMENT PARTS

(continued)



THREE PHASE CONTROL PANELSREPLACEMENT PARTS

PART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.155-440-902 Lightning Arrestor 189.00 1.0ARX-2C-120A Duplex Alternating Relay 57.00 0.5BW125JAGU-3P050SB Circuit Breaker 395.00 0.5BW125JAGU-3P060SB Circuit Breaker 395.00 0.5BW250JAGU-3P200SB 200 Amp Circuit Breaker w/ Handle 865.00 1.0BW250JAGU-3P225SB 225 Amp Circuit Breaker w/ Handle 865.00 1.0CHCC3D Fuse Block 43.00 0.5EDCC-1 Fuse 11.00 0.5EDCC15 Fuse 11.00 0.5EDCC20 Fuse 11.00 0.5EDCC25 Fuse 12.00 0.5EDCC4 Fuse 11.00 0.5EDCC5 Fuse 11.00 0.5EDCC6 Fuse 12.00 0.5EDCC9 Fuse 12.00 0.5GH15BN-3-10A Contactor 70.75 0.5GH15CN-3-10A Contactor 81.00 0.5GH15DN-3-10A Contactor 90.25 0.5GH15ET-3-00A Contactor 133.00 0.5GH15FT-3-00A Contactor 145.00 0.5GH15GT-3-00A Contactor 264.00 0.5GH15HT-3-00A Contactor 286.00 0.5GH15JT-3-00A Contactor 298.00 0.5ICM203 Time Delay 26.40 0.1KSR3.100 ASSEMBLY Disconnect w/ Handle 114.00 0.5KSR3.40 ASSEMBLY Disconnect w/ Handle 68.00 0.5KSR3.60 ASSEMBLY Disconnect w/ Handle 74.00 0.5KSR3.80 ASSEMBLY Disconnect w/ Handle 98.00 0.5ML-GREEN Pump Run Light, Green 32.86 0.5PH100MGJ Transformer 150.00 0.5PH100MQMJ Transformer 145.00 0.5PH350MGJ Transformer 272.50 0.5PH350MQMJ Transformer 212.50 0.5RTD32-1100 Overload Relay 98.00 0.5RTD32-1400 Overload Relay 104.00 0.5RTD32-180 Overload Relay 98.00 0.5RTD32-1800 Overload Relay 104.00 0.5RTD32-2400 Overload Relay 104.00 0.5RTD32-270 Overload Relay 98.00 0.5RTD32-3200 Overload Relay 125.00 0.5RTD32-400 Overload Relay 98.00 0.5RTD32-600 Overload Relay 98.00 0.5RTD32-900 Overload Relay 98.00 0.5RTD65-4200 Overload Relay 182.00 0.5RTD65-5200 Overload Relay 224.00 0.5RTD65-6500 Overload Relay 224.00 0.5



THREE PHASE CONTROL PANELSREPLACEMENT PARTS

(continued)

PART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.SQD9070T100D1 Transformer 185.50 2.0SQD9070T100D3 Transformer 180.20 2.0SQD9070T300D1 Transformer 254.40 1.0SQD9070T300D3 Transformer 360.40 1.0SQD9070TF100D5 Fused Transformer - 120 Volt 265.00 2.0SQD9070TF300D5 Fused Transformer - 120 Volt 466.40 2.0SQD-ZB4BD2 On-Off Switch only 20.00 --SQD-ZB4BD8 Auto-Off-Test Switch only 25.00 --SQDZB4BZ103 Switch Contact Block (N.O.) 30.00 --SQDZBE102 Switch Contact Block (N.C.) 22.00 --TIM271 Alternating Relay (3 pumps) 487.60 1.0TIMB471 Alternating Relay (4 pumps) 492.90 1.0VKA3125N Disconnect with Handle 213.00 0.5VKA3160N Disconnect with Handle 354.00 0.5WMZS1D01 Control Circuit Breaker, 1 POLE 19.08 0.5WMZS1D03 Control Circuit Breaker, 1 POLE 19.08 0.5WMZS2D00 Control Circuit Breaker, 2 POLE 37.10 0.5WMZS2D01 Control Circuit Breaker, 2 POLE 37.10 0.5WMZS2D02 Control Circuit Breaker, 2 POLE 37.10 0.5WMZT3D03 Circuit Breaker, 3 POLE 125.00 0.5WMZT3D04 Circuit Breaker, 3 POLE 125.00 0.5WMZT3D05 Circuit Breaker, 3 POLE 125.00 0.5WMZT3D06 Circuit Breaker, 3 POLE 125.00 0.5WMZT3D07 Circuit Breaker, 3 POLE 125.00 0.5WMZT3D08 Circuit Breaker, 3 POLE 125.00 0.5WMZT3D10 Circuit Breaker, 3 POLE 125.00 0.5WMZT3D13 Circuit Breaker, 3 POLE 125.00 0.5WMZT3D15 Circuit Breaker, 3 POLE 125.00 0.5WMZT3D16 Circuit Breaker, 3 POLE 125.00 0.5WMZT3D20 Circuit Breaker, 3 POLE 125.00 0.5WMZT3D25 Circuit Breaker, 3 POLE 125.00 0.5WMZT3D30 Circuit Breaker, 3 POLE 125.00 0.5WMZT3D32 Circuit Breaker, 3 POLE 125.00 0.5WMZT3D40 Circuit Breaker, 3 POLE 125.00 0.5



VARIABLE FREQUENCY DRIVEREPLACEMENT PARTS

PART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.150-814-902 Single Phase Lightning Arresor 56.00 0.5155-440-902 Three Phase Lightning Arrestor 189.00 1.04" FLOW SENSOR Flow Sensor with 4" PVC Saddle 135.00 0.56" FLOW SENSOR Flow Sensor with 6" PVC Saddle 135.00 0.58" FLOW SENSOR Flow Sensor with 8" PVC Saddle 135.00 0.5STD TRANSDUCER Standard Transducer Unit 375.00 3.0X5C1S010C09 1HP - 1PH/115V in and 3PH/230V out Drive Unit 1,324.00 14.0X5C20010C09 1HP - 3PH/230V in and 3PH/230V out Drive Unit 1,671.00 14.0X5C20020C09 1HP - 3PH/200V in and 3PH/200V out or

1-1/2HP - 3PH/200V in and 3PH/200V out or1-1/2HP - 3PH/230V in and 3PH/230V out Drive Unit 1,656.00 14.0

X5C20030C09 1-1/2HP - 1PH/230V in and 3PH/230V out or 2HP - 3PH/200V in and 3PH/200V out or2HP - 3PH/230V in and 3PH/230V out Drive Unit 1,809.00 14.0

X5C20050C09 2HP - 1PH/230V in and 3PH/230V out or3HP - 3PH/200V in and 3PH/200V out or3HP - 3PH/230V in and 3PH/230V out Drive Unit 2,124.00 14.0

X5C20075C09 5HP - 3PH/200V in and 3PH/200V out Drive Unit 2,351.00 14.0X5C20100C09 7-1/2HP - 3PH/200V in and 3PH/200V out or

7-1/2HP - 3PH/230V in and 3PH/230V out Drive Unit 2,716.00 30.0X5C20150C09 10HP - 3PH/200V in and 3PH/200V out or

15HP - 3PH/230V in and 3PH/230V out Drive Unit 3,261.00 30.0X5C20200C 15HP - 3PH/200V in and 3PH/200V out Drive Unit 4,181.00 50.0X5C2S050C 3HP - 1PH/230V in and 3PH/230V out or

5HP - 1PH/230V in and 3PH/230V out or5HP - 3PH/230V in and 3PH/230V out Drive Unit 2,409.00 30.0

X5C2S100C 7-1/2HP - 1PH/230V in and 3PH/230V out or10HP - 1PH/230V in and 3PH/230V out or10HP - 3PH/230V in and 3PH/230V out Drive Unit 2,919.00 30.0

X5C40010C09 1HP - 3PH/460V in and 3PH/460V out Drive Unit 1,576.00 14.0X5C40020C09 1-1/2HP - 3PH/460V in and 3PH/460V out or 1,716.00 14.0X5C40030C09 1HP - 1PH/460V in and 3PH/460V out or

2HP - 3PH/460V in and 3PH/460V out Drive Unit 1,874.00 14.0X5C40050C09 1-1/2HP - 1PH/460V in and 3PH/460V out or

2HP - 1PH/460V in and 3PH/460V out or3HP - 3PH/460V in and 3PH/460V out or5HP - 3PH/460V in and 3PH/460V out Drive Unit 2,204.00 14.0

X5C40075C09 3HP - 1PH/460V in and 3PH/460V out or7-1/2HP - 3PH/460V in and 3PH/460V out Drive Unit 2,579.00 14.0

X5C40100C09 5HP - 1PH/460V in and 3PH/460V out Drive Unit 2,774.00 14.0X5C40150C09 10HP - 3PH/460V in and 3PH/460V out Drive Unit 3,181.00 30.0X5C40200C09 7-1/2HP - 1PH/460V in and 3PH/460V out Drive Unit

15HP - 3PH/460V in and 3PH/460V out Drive Unit 3,744.00 30.0X5C40250C09 10HP - 1PH/460V in and 3PH/460V out Drive Unit 4,524.00 30.0



STAINLESS STEEL CASTINGS

RECUPERATORSPART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.

40105 4" Recuperator 312.00 445105 Extreme Recuperator 312.00 560105 6" Recuperator 405.00 8.5

IMPELLERSPART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.

40101 4" No. 1 Impeller 230.00 0.7540102 4" No. 2 Impeller 230.00 0.7545101 Extreme No. 1 Impeller 230.00 245102 Extreme No. 2 Impeller 230.00 2461-13 4" 13 Degree 4-blade Impeller 230.00 0.75461-17 4" 17 Degree 4-blade Impeller 230.00 0.75461-23 4" 23 Degree 4-blade Impeller 230.00 0.7560101 6" No. 1 Impeller 315.00 260102 6" No. 2 Impeller 315.00 260103 6" No. 3 Impeller 315.00 260104 6" No. 4 Impeller 315.00 260104+ 6" No. 4 + Impeller 315.00 2

MISCELLANEOUS COMPONENTSPART NUMBER: PRODUCT DESCRIPTION: LIST PRICE: WT.

OR-260BN70 O-Ring 1.39 --40203 4" Stainless Steel Cord Guard Clamp: 3.56" to 4.5" 2.89 --40204 SS Hex Head Nuts: 5/16"-24 0.34 --40240 Lifting Bracket 4.95 --50112 Urethane Base Pads 12.30 --50113-Custom Spacer Blocks - cut to fit 8.75 --50122 Urethane Base Pads 12.55 --50132 Urethane Base Pads 14.86 --50201 SS Hex Head Bolts: 5/16"-18x3/4" 0.27 --50202 SS Lock Washers: 5/16" Standard 0.18 --50208 SS Hex Head Bolts: 5/16"-18 x 3" 2.06 --50211 SS Hex Head Bolts: 5/16"-18 x 2-1/4" 1.00 --50213 SS Hex Head Bolts: 5/16"-18 x 3-1/2" 0.3350214 SS Hex Head Bolts: 5/16"-18 x 1" 0.50 --50216 SS Hex Head Bolts: 5/16"-18 x 3-1/2" 1.46 --50217 SS Hex Head Bolts: 5/16"-18 x 4" 1.16 --50218 SS Hex Head Bolts: 5/16"-18 x 1-3/4" 0.65 --50223 SS Socket Cap Screw: 1/4"-20 x 3/4" 0.40 --50224 SS Socket Cap Screw: 1/4"-20 x 1/2" 0.34 --50225 SS Socket Cap Lockwasher: 5/16" Standard 0.16 --50226 SS Socket Cap Screw: 5/16"-18 x 3/4" 0.95 --60201 6" Stainless Steel Cord Guard Clamp: 5.63" x 6.5" 3.89 --60205 SS Hex Head Bolts: 1/2"-20x1" 1.80 --60206 SS Lock Washers: 1/2" Standard 0.55 --



This page intentionally left blank.


CARRY MANUFACTURING, INC.CAPSULE PUMP STATION

Golf Course Management

Agricultural Water Drainage

Municipal Storm Water Management

CONTROLLING STORM WATER BY PUMPING

CONTROLLING storm water flow is tricky at best. However, the use of retention, storage, and pumps canprovide an alternative solution when gravity systems cannot provide an adequate level of protection.

The purpose of a Capsule Pump Station is to receive, store temporarily as needed, and move storm waterthrough a collection system.

The submersible wet well capsule lift station is widely used in Europe, and is quickly becoming morecommon in North America. It is built around a submersible pump motor unit, which is designed to operateunder water with an open submerged inlet.

More and more, submersible pumps are being specified in North America. Large and small units are usedin farming, motels, schools, marine, commercial buildings, industrial plants, and municipal storm watersystems in a variety of applications.

Submersible pumps in capsule stations have proven effective over the last quarter of a century, refuting thoseskeptics who originally wondered how an electric motor-powered pump "could run under water." Originallydeveloped in Europe, millions are now used throughout the world to pump storm water, raw water, and wastewater.

Capsule - 1 Effective 04/2011

CARRY MANUFACTURING, INC.CAPSULE PUMP STATION

CMI'S CAPSULE PUMP STATION

CMI Capsule Pump Stations are a complete solution for shopping centers, parking lots, apartment complexes,manufactured home communities, golf courses and farm land de-watering with high-volume, low-headpumping applications. Excellent for storm-flow management and other applications in the 2 to 25 feet of totaldynamic head range, the CMI Capsule Pump Stations generate from 50 to 5,800 GPM per station. Allstations are available for use with either single phase or three phase power.

CMI Capsule Pump Stations are fully documented with design and layout information. The Capsule PumpStations are factory-built-complete and are a ready-to-install solution for your pumping application. Uponyour approval, we will arrange for prompt delivery of your order.

CMI Capsule Pump Stations are efficient for the project engineer and contractor and economical for thecustomer. The stations are a single-source solution, which provide first-class quality and reliability.

A CMI CAPSULEPUMP STATIONbegins with the design. Each capsule isd e s i g n e d a n dmanufactured to yourspecifications. Thisensures that the finalproduct fits yourapplication and yourneeds. Pricing is donesolely by the factory,due to the variousoptions available inyour CMI CapsulePump Station. Todesign your CapsulePump Station, callCMI to talk to ak n o w l e d g e a b l erepresentative aboutyour particular designrequirements.

Capsule - 2 Effective 04/2011

Efficient - Economical - Durable • 1/2HP/1PH/115V 2-wire motor • No control panel needed • Requires Proper Circuit Breaker Protection • Bronze Impeller for long life • Tough PVC shroud with rope brackets • 30' of 14/3 power cord with plug • Available with or without screen

Call today to order your new Bubbler Pump!

$662.50

BUBBLER PUMP

from CARRY PUMPS

PREVENT ice from forming around boats, docks, and other structures by providing constant circulation of the warmer subsurface water to the surface.

PROTECT your waterscape investment from the damages of winter ice and snow.

KEEP your fish and duck ponds open.

BUBBLER PUMPS can also melt existing ice.

Carry Manufacturing, Inc. 1360 Prospect Ave, Caro, MI 48723-9288 Phone: 800-49-CARRY or 989-672-2779

Fax: 888-502-8289 or 989-672-2770 Email: [email protected]

www.carrymfg.com

FOUNTAIN PUMPS

Carry Pumps can provide your customer with a single stage tur-bine pump to fulfill a variety of fountain applications. Available with a wide range of options, we can custom design a pump to your specifications.

• 304 Stainless Steel Construction • Single Stage Turbine Pump • Franklin Electric or Sumoto Motor (with Ball

Bearings and Mechanical Seal) • Available in 3/4HP, 1-1/2HP or 3HP • 3/4HP Pumps Available

with 2” Discharge • 1-1/2HP Pumps Available

with either 2" or 3" Discharge

• 3HP Pumps Available with

3” Discharge • Single or Three Phase • Vertical or Horizontal

Models • PVC Screen with 5/32"

Perforations • Pumps Require a Control

Panel (Except for: 3/4HP/1PH/230V and 1.5HP/1PH/230V 2-Wire Pumps which require proper overload protection)

3HP/1PH/230V Vertical

CARRY FOUNTAIN PUMPS

1.5HP PERFORMANCE CURVE

3HP PERFORMANCE CURVE

.75HP PERFORMANCE CURVE

Available in both vertical and horizontal models. All Fountain pump prices include a 30' motor lead. Fountain Pumps with a 2" discharge have 2" fe-male NPT threads for connecting to the discharge piping. Carry recommends using 2" Schedule 40 PVC male adapters to connect the discharge pipe to the Fountain pump. Fountain pumps with a 3" dis-charge have 3" female NPT threads for connecting to the discharge piping. Use 3" Schedule 40 PVC male adapters to connect the discharge pipe to the Fountain pump. All submersible pumps should be protected by a ground fault circuit interrupter (GFI). Pumps used in water features should operate at 300 volts or less. When installing submersible pumps, always follow local code requirements.

Vertical Fountain Pump Dimensions (all dimensions in inches)

* 1PH pumps are available in 2-wire or 3-wire. Please specify when ordering. Please note: 2-wire pumps require adequate overload protection.

(effective February 1, 2013) VERTICAL HORIZONTAL

MODEL NUMBER PRODUCT DESCRIPTION LIST PRICE LIST PRICE

F20075-123V or H .75HP/1PH/230V w/2” Discharge* 840.00 840.00

F20075-320V or H .75HP/3PH/200V w/2” Discharge 840.00 840.00

F20075-323V or H .75HP/3PH/230V w/2” Discharge 840.00 840.00

F20150-123V or H 1.5HP/1PH/230V w/2” Discharge* 1,890.00 1,890.00

F30150-123V or H 1.5HP/1PH/230V w/3” Discharge* 1,890.00 1,890.00

F20150-320V or H 1.5HP/3PH/200V w/2” Discharge 1,730.00 1,730.00




F30300-123V or H 3HP/1PH/230V w/3” Discharge 2,330.00 2,330.00



CARRY FOUNTAIN PUMPS PRICE LIST

Dimensions Weight (lbs.)

Height Minimum Submergence

Screen Diameter

Diameter Of Base

Discharge* Screen Height

3/4HP/1PH 2-wire 30 20.50 22.00 6.625 9.50 2”NPT 17.90 3/4HP/1PH 3-wire 30 20.50 22.00 6.625 9.50 2”NPT 17.90 3/4HP/3PH 30 20.50 22.00 6.625 9.50 2”NPT 17.90 1-1/2HP/1PH 2-wire 53 29.25 31.00 6.625 9.50 2” or 3”NPT 26.00 1-1/2HP/1PH 3-wire 55 27.70 29.50 6.625 9.50 2” or 3”NPT 24.50 1-1/2HP/3PH 50 27.70 29.50 6.625 9.50 2” or 3”NPT 24.50 3HP/1PH 85 33.80 34.00 8.625 11.25 3”NPT 30.00 3HP/3PH 75 30.90 31.00 8.625 11.25 3”NPT 27.65

Horizontal Fountain Pump Dimensions (all dimensions in inches) Dimensions Weight

(lbs) Height Minimum

Submergence Screen Diameter

Width Of Base

Discharge* Screen Length w/ends

3/4HP/1PH 2-wire 25 8.00 15.00 6.625 9.00 2”NPT 17.90 3/4HP/1PH 3-wire 25 8.00 15.00 6.625 9.00 2”NPT 17.90 3/4HP/3PH 25 8.00 15.00 6.625 9.00 2”NPT 18.10 1-1/2HP/1PH 2-wire 48 8.00 18.00 6.625 9.00 2 or 3”NPT 26.70 1-1/2HP/1PH 3-wire 50 8.00 18.00 6.625 9.00 2 or 3”NPT 25.20 1-1/2HP/3PH 45 8.00 18.00 6.625 9.00 2 or 3”NPT 23.70 3HP/1PH 78 10.30 18.00 8.625 13.25 3”NPT 31.80 3HP/3PH 68 10.30 18.00 8.625 13.25 3”NPT 28.90

*1-1/2HP Fountain Pumps are available in either 2” or 3” discharge. Please specify when ordering.

CARRY FOUNTAIN PUMPS

Note: The use of a Sumoto motor in place of a Franklin Electric motor may alter the dimensions from those above. Contact the factory for specifics.

Note: The use of a Sumoto motor in place of a Franklin Electric motor may alter the dimensions from those above. Contact the factory for specifics.

FOUNTAIN PUMP CONTROL PANELS

Carry Manufacturing has Franklin Electric or Sumoto Single Phase Control Panels which contain the start and run capacitors to operate the corresponding motors and are available with (delux) or without (standard) a switch.

• Rain tight two-piece enclosure. • Capacitor start/capacitor run design. • Six heavy-duty box type terminals provide

easy access up to #2 AWG wire. • External access to overload resets. • User friendly connection diagrams and

trouble shooting instructions.

• Easy access to grounding lugs. • Multiple sized knockouts. • UL 778 recognized and C.S.A. Certified. • Delux models have an Auto-Off-Test switch. • May substitute On-Off switches for Auto-

Off-Test switch in Delux control panels.

STANDARD, DELUX OR CUSTOM DESIGNED!

Single Phase Control Panel

Three Phase Control Panels are manufactured by Carry and are used for Three Phase, 200 or 230 Volt Pumps. These controls contain a motor starter and a transformer and are available with (delux) or without (standard) a switch and a pump run light.

Delux Three Phase Control Panel

• NEMA 3R rain tight enclosure. • Heavy-duty box type terminals with easy ac-

cess for up to 8 AWG wire. • Horsepower rated, definite purpose magnetic

motor contactor and adjustable overload relay.

• Square D motor starters, transformers and switches.

• Delux models have an Auto-Off-Test switch and a Pump Run light.

• May substitute On-Off switches for Auto-Off-Test switch in Delux control panels.

Distributed by:

Documents

4 SUPER STAINLESS SUBMERSIBLE FRANKLIN ELECTRIC MOTORS · carry manufacturing, inc. replacement parts 4" super stainless submersible franklin electric motors (continued) construction