April 2011

PART # DESCRIPTION SUG. RETAILFOr 95-11 FlT, FlHT, FlHX, FlTr, FlHr, FlHX MODElSWiTH 2” STANDArD BAFFlES1801-0506 Slant cut $489.951801-0504 Scalloped slash-cut 499.951801-0500 Straight cut 469.951801-0502 Slant down 489.951801-0508 Scallop slant-cut 499.951801-0510 Inverted billet insert 499.95

PART # DESCRIPTION SUG. RETAILWiTH 21/2” pErFOrMANCE BAFFlES1801-0507 Slant cut $489.951801-0505 Scalloped slash-cut 499.951801-0501 Straight cut 469.951801-0503 Slant down 489.951801-0509 Scallop slant-cut 499.951801-0511 Inverted billet insert 499.95

4” Slip-ON MUFFlErS•4” diameter slip-on mufflers feature 16-gauge steel construction, removable flow-through baffles and show-chrome finish•Bolt to stock locations with supplied hardware•Sold in pairs•Made in the U.S.A.

1801-0506

1801-0502

1801-0510

1801-0500

1801-0508

1801-0505

ANDrEWS prODUCTSWe are proud to say that we have been partnered with the Andrews company right from the start. Over the years their product line has grown to include high-quality products of all types including engine, drivetrain and electrical. And while today their customers also include top Nascar and Busch racing teams that demand the best, they have never lost focus on their attention to detail, quality and performance for riders who also demand the best.

2

pUSHrOD KiTS•Pushrods fit Shovel engines using stock diameter tubing so there is no cover tube interference

•Available in aluminum for quiet operation or chromoly for maximum strength

PART # DESCRIPTION SUG. RETAILFOr 66-84 SHOVElHEAD0928-0027 Aluminum $98.950928-0026 Chromoly 98.95

“C” GriND CAM FOr 48-69 BiG TWiN•Best production cam made for big street engines•Strokers from 84 to 96 inches will really turn on this cam

•Broad torque range from 2,000 to 7,000+ rpm

GRIND OPEN CLOSE DURATION @ .053 VALVE LIFT“C”Intake 37° 61° 278° .525Exhaust 61° 37° 278° .525

PART # DESCRIPTION SUG. RETAIL0925-0583 For 66-69 Shovelhead and 48-65 Panhead $145.95

PART # DESCRIPTION SUG. RETAIL0925-0584 For 37-47 Knucklehead $163.95

PART # DESCRIPTION SUG. RETAIL0925-0585 For 37-47 Knucklehead $163.95

PART # DESCRIPTION SUG. RETAIL0925-0586 For 37-47 Knucklehead $163.95 GRIND OPEN CLOSE DURATION @ .053 VALVE LIFT“N”Intake 13° 44° 234° .348Exhaust 47° 16° 240° .348“S”Intake 27° 55° 262° .370Exhaust 55° 27° 262° .370“K”Intake 35° 63° 278° .368Exhaust 63° 35° 278° .368

Xl CAMS“Y” CAMS•Biggest available four-cam set that does not require head work; however, some 82 engines may require spring spacing

•Uses stock springs and provides great mid-range and upper-end power

•Use with 9.0:1 to 10.0:1 compression ratios for best power gain

NOTE: Tach drive gear must be removed from #4 cam on 81-E84 models.

“pB+” CAMS•Bolt-in four-cam set•More horse power and torque•Stock springs OK to 7000 rpm, requires no headwork

PART # DESCRIPTION SUG. RETAILDS-199356 For 71-E84 XL $407.95

PART # DESCRIPTIONSUG.

RETAIL0925-0593 For L84-85 XL $407.950925-0592 For 81-E84 XL 407.95

PART # DESCRIPTIONSUG.

RETAIL0925-0591 For 71-80 XL $407.950925-0590 For 57-70 XL 407.95

GRIND OPEN CLOSEDURATION @ .053

VALVE LIFT

LIFT @ TDC

pB+Intake 34° 40° 254° .400 .200Exhaust 43° 31° 254° .410 .192

0928-0027

0928-0026

“K” GriND CAMS•Perfect cam for stroked motors•Strong pull to 6000 rpm•This is the Knuckle equivalent of a “C” cam in a Pan/Shovel motor

“S” GriND CAMS•Bolt-in performance cam•Smooth idle, strong pull to 6000 rpm•This cam is the knuckle equivalent of a “B” cam in a Pan/Shovel motor

“N” GriND CAMS•Stock Knuckle replacement cam•For stock motors and restoring an older classic engine, this is the cam to use

CAMS FOr KNUCKlEHEAD ENGiNES

GRIND OPEN CLOSE DURATION @ .053 VALVE LIFT“Y”Intake 35° 47° 262° .425Exhaust 53° 29° 262° .425

3

SUpErVOlT iGNiTiON COilS•The original Andrews ignition coil adds great performance with a classic look

•Replacement coils deliver 30,000+ volts•2.8 ohm coil fits electronic ignition/dual fire•4.8 ohm coil fits points ignition/dual fire•Produce more voltage than a stock coil•Sold each

BElT DriVE TrANSMiSSiON pUllEY•Machined from heat-treated, gear-quality steel•Made in the U.S.A.

NOTE: May require some elongation of axle hole in swingarm or change in belt length to allow for proper belt adjustment

PART # DESCRIPTION SUG. RETAIL2102-0204 4.8 ohm coil, black $62.952102-0205 2.8 ohm coil, red 62.95

PART # DESCRIPTION SUG. RETAILFOr All 07-11 SiX-SpEED BElT DriVE MODElS AND 06 DYNA GliDE1201-0584 31-tooth “Good Acceleration” $137.951201-0587 32-tooth Stock replacement 137.95FOr 94-06 BiG TWiN FiVE-SpEED BElT DriVE MODElS (EXCEpT 06 DYNA GliDE)1201-0583 31-tooth “Good Acceleration” 137.951201-0586 32-tooth Stock replacement 137.951201-0589 33-tooth “Overdrive” 137.95FOr 85-93 BiG TWiN FiVE-SpEED BElT DriVE MODElS1201-0582 31-tooth “Good Acceleration” 147.951201-0585 32-tooth Stock replacement 147.951201-0588 33-tooth “Overdrive” 147.95

ADJUSTABlE pASSENGEr FlOOrBOArD MOUNTS•Made from CNC-machined, billet aluminum, then triple chrome-plated

•Accept either stock Harley-Davidson® floorboards or any direct-fit accessory floorboard (floorboards not included)

•Adjust in seconds through a 9” range of motion; simply pull out spring-loaded lock pins, then move board up or down until pin clicks into next position; no tools required

•Available for bikes with OEM or Rinehart exhaustPART # DESCRIPTION SUG. RETAILFOr 93-09 FlT/FlHT/FlHS/FlTr/FlHr/FlHX/FlHTCUTG1621-0301 For bikes w/ OEM exhaust $329.951621-0306 For bikes w/ Rinehart True-dual exhaust 329.95

TrAilEr HiTCH FOr H-D TriKE MODElS•Super-strong receiver type hitch fabricated from laser cut steel, hand welded, then powder coated

•Bolts directly to frame in minutes•Receiver is almost completely hidden and tongue installs easily using a hitch pin and clip

•Hitch made to be used with or without Harley-Davidson’s optional rear bumper

•Tongue and 17/8” ball are triple chrome plated•Tongue height measures 11” to accommodate most trailers•Includes plug-and-play wire harness and all necessary hardware•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL3902-0093 For 11 FLHTCUTG/FLHXXX models $299.95

ADJUSTABlE pASSENGEr FlOOrBOArDS WiTH MOUNTS•The ultimate in passenger comfort; movement of boards 2.5” forward eliminates the problem of passenger’s calves pressing against saddlebag guard rail, also greatly increases foot and leg support over stock boards

•Boards available in either classic steel or billet aluminum; all mounts are CNC-machined from billet aluminum and triple chrome-plated

•Pads are made of anti-vibration neopene to ensure passenger comfort•Adjust in seconds by pulling the spring-loaded locking pins•Install easily without modification to the bike; no tools required•Available for bikes with OEM or Rinehart exhaust

PART # DESCRIPTION SUG. RETAILFOr 93-09 FlT/FlHT/FlHS/FlTr/FlHr/FlHX/FlHTCUTG WiTH OEM EXHAUST1621-0302 Classic steel boards $379.951621-0303 Billet aluminum boards 429.95FOr 93-09 FlT/FlHT/FlHS/FlTr/FlHr/FlHX/FlHTCUTG WiTH riNEHArT TrUE-DUAl EXHAUST1621-0305 Classic steel boards 379.951621-0304 Billet aluminum boards 429.95

2102-02042102-0205

1201-0584 1201-0583 1201-0588

1621-0302

1621-0303

1621-0301

1621-0306

DYNOJETMost of you know that Dynojet is a world leader in the development and manufacture of high performance accessories of all types. Their state-of-the-art facilities and technology keeps them at the forefront of performance with new products constantly in the works. We at Drag Specialties are proud to be able to bring you their latest offerings quickly and easily so that you can keep your customers at the forefront of their fellow riders.

4

pOWEr ViSiON•The quickest and most powerful flash tuner on the market•The sophisticated, yet easy-to-use, 3.5” full-color touch-screen display mounts to handlebars with integrated Amps 4-hole threaded inserts; also mounts to most mounts that feature Amps 4-mounting options, see page 1333 of the 2011 FatBook

•The display’s interface cable plugs directly to the bike’s diagnostic connector•NO COMPUTER REQUIRED; simply select the tune and follow the on-screen prompts to flash the bike; tunes can also be edited directly from the Power Vision

•Utilizes WinPV (Windows PC-based tuning application)•Stores up to six different tunes that can be flashed to the bike•Downloads and stores the stock calibration in case OEM restoration is needed; stock calibration can also be saved as an editable copy and used as a starting point

•Dynojet preconfigured tunes are preloaded on the unit; Power Vision will identify the bike’s information and automatically sort hundred of applicable, dyno-proven tunes

•Custom tunes can be loaded by a tuning shop or received via email and loaded onto the device•Displays all J1850 H-D vehicle data, wide-band air fuel ratio2 and various calculated channels (including MPG instant and trip MPG)•AutoTune Basic and Pro3 calculates and stores fuel trims to optimize fuel curve•Checks and clears diagnostic codes•Features adaptive trims and idle offset (with bike running)

NOTE: The Power Vision “marries” an individual ECM and may be used only on that bike for flashing the ECM. For this reason LeMans Corporation/ Drag Specialties does not take back Power Visions for any reason, used or not. All returns and or adjustments must be made directly with Dynojet Research. The Power Vision may be used on any bike to read and clean trouble codes.

PART # DESCRIPTION SUG. RETAIL1020-1493 For all H-D models with Delphi ECM (except 11 Softails) $549.95

FUElpAK•Original version which is not legal for sale in CA

•Throttle position sensor-based system simplifies the process of fuel-injection tuning

•Enables you to fine-tune the fuel mixture throughout the entire rpm range with the touch of a button

•Increases power and improves throttle response•Very user friendly; plugs into the existing harness on the bike•No computer or software is required, simply punch in the values supplied with the Fuelpak

•Values supplied are for use with Vance & Hines exhaust systems•Fuelpak will also work with other exhaust systems (contact V&H tech support for tuning information)

•Includes all necessary mounting hardware

NOTE: Not legal for sale or use on pollution controlled vehicles.

NOTE: Requires the use of a high-performance air filter.

THrOTTlEpAK™ THrOTTlE MANAGEMENT SYSTEM•Brings back the quick throttle response of cable actuated throttles lost in throttle by wire (TBW)

•One twist of the throttle and riders will notice the improved response and acceleration

•Works on any bike’s configuration; stock, modified and any exhaust combination

•Possibly the easiest performance mod ever; installs in minutes, simply plug into factory connectors

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1020-1521 For 11 FLHT, FLHR, FLHX, FLTR models $279.95

PART # DESCRIPTION SUG. RETAIL1020-1525 All 08-11 H-D Throttle By Wire (TBW) models $219.99

EFi pOWEr prOGrAMMEr•Get riding quickly with this fuel-management unit and select the mode that suits your style

•Plugs into existing wiring using the stock connectors

•Unlike most other fuel-injection programmers, this one is load-sensitive•No laptop or software required

NOTE: Professional installation is recommended.PART # DESCRIPTION SUG. RETAIL1020-1491 For 08-11 XR1200/1200X $359.95

OXYGEN SENSOr EliMiNATOr KiTSAND ACTiVE iNTAKE AND EXHAUST EliMiNATOr KiT•Oxygen Sensor Eliminator Kits allow air/fuel ratio changes for racing applications

•Active Intake and Exhaust Eliminator Kit is used to avoid setting a diagnostic trouble code when installing some aftermarket air filters and exhaust that require the removal of original equipment active systems; for off-road racing use only

NOTE: Not legal for sale or use on pollution-controlled vehicles.

PART # DESCRIPTION SUG. RETAILOXYGEN SENSOr EliMiNATOr KiTS1020-1395 For 06-11 models (except 10-11 FLHR/FLHT/FLHX/

FLTR and H-D FL Trikes $24.951020-1478 For 10-11 FLHR/FLHT/FLHX/FLTR and H-D FL Trikes 34.95ACTiVE iNTAKE AND EXHAUST EliMiNATOr KiT1020-1479 For late-model European spec models w/ active

intake and exhaust 29.95

1020-1395

1020-1478

1020-1479

DElUXE NECK COVEr KiT•Add brilliance to a dull area with these smooth, quickly installed chrome covers that shroud the neck and extend down the frame

•Includes two snap-on down tube pieces that add coverage almost all the way down to the floorboard mounts

COBrA FUll-lENGTH SEAT•A blast from the past with true “chopper” style

•Follows the flow of your bike. It has a little thicker passenger area

•Top-grade black vinyl cover•Base plate is powder-coated steel and carpeted to protect the fender•Made in the U.S.A.

AViATOr SOlO SEAT•Design fills the gap between the Monterey solo touring seat and the Bare Bones thin, low seat

•Top-grade black vinyl cover

•Base plate is powder-coated steel and carpeted to protect painted surfaces

•Seating area is 13” W with 5” of back support

•Pillion pad sold separately

•Made in the U.S.A.

VillAiN SOlO SEAT•A look unlike any other – will transform the look of your bike

•Molded one-piece foam foundation, covered with premium-grade black vinyl on a 16-gauge (1.5mm) powder-coated steel base plate

•Seat bottom carpeted to protect the fender

•No pillion seat available•Made in the U.S.A.

5

PART # DESCRIPTION SUG. RETAILFOr 08-11 FlHT, FlHr, FlHX AND FlTr MODElS0801-0587 Smooth seat $314.95

PART # DESCRIPTION SUG. RETAILFOr 06-10 FXST, 07-11 FlSTF (EXCEpT FXSTD, FXSTSSE)0802-0600 Smooth seat $270.95

PART # DESCRIPTION SUG. RETAILFOr 08-11 FlHT, FlHr, FlHX, FlTr MODElS0801-0584 Smooth solo seat $283.950801-0585 Smooth pillion pad; 103/4” W 149.950801-0586 Smooth wide pillion pad; 13” W 156.95

EZ GliDE iii™ BACKrEST ASSEMBlY•Pad features solar-reflective leather in the contact area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler backrest, higher durability and longer life over conventional leather or vinyl

•Sewn in zipper pouch on rear of pad•Developed to be used in all Drag Specialties seats with EZ Glide II™ applications where a taller pad is desired

•Will also work in the passenger position on all Drag Specialties seats with dual-backrest seat applications

•Backrest has a single lower detent for positioning in the seat; does not adjust up or down on the bar

•Adusts fore-and-aft 2”; pivots and will fold forward•All exposed metal parts feature a polished, nickel-chrome finish•All internal hardware is zinc-plated to prevent rust•14-gauge steel internal base plate•Pad measures 10” W x 71/2” tall•Made in the U.S.A.

SOLAR

REFLECTIVE

PART # DESCRIPTION SUG. RETAIL0822-0154 EZ Glide III™ backrest assembly $199.95

FOlD-DOWN lUGGAGE rACK•Folds down from the sissy bar to create extra storage space when you need it

•Hinges up against the back rest when not in use for a clean look

•For use with OEM stock or “low” sissy bar side plates on H-D rigid or detachable side plates on models listed

•Measures 111/2” L x 81/2” – 51/2” W (tapered)

NOTE: Not for use with Küryakyn Sissy Bar side plates or Küryakyn Raptor Sissy Bar.

PART # DESCRIPTION SUG. RETAIL1501-0389 For 84-11 FXST (except FXSTD), 06-11 FLST (except

07-11 FLSTFSE, 07-11 FLSTF, 08-11 FLSTSB); 06-11 FXD (except 08-11 FXDF, 09 FXDFSE), 04-11 XL $159.95

SADDlEBAG/SiDE COVEr ACCENTS FOr TOUriNG MODElS WiTH HArD BAGS•Create a flowing, sweeping look with these streamlined chrome accents

•Work with the contours of the saddlebags•Designed to be used without saddlebag rails•Peel-and-stick installation•Sold as a set of six piecesPART # DESCRIPTION SUG. RETAIL3501-0656 For 93-08 FLT, FLHT, FLHR, FLTR, FLHX $124.95

PART # DESCRIPTION SUG. RETAIL0504-0194 For 95-07 FLHT, FLHR, FLTR, FLHX $199.95

0801-0585

0801-0584

0801-0586

6

pErFOrMANCE MACHiNEWith more Trikes from “The Motor Company” rolling down the road every day, it is great to have the folks at Performance Machine dreaming, designing and building some of the hottest new products going for this lucrative market. Their latest custom wheels and brakes are probably the first things you think of, but remember that many of their other popular offerings for 2-wheel Tourers look great and perform equally as well on the 3-wheelers.

DiFFErENTiAl-BOrE FOUr-piSTON rEAr CAlipEr•Caliper has differential bore pistons with dual-pad design•Differential bore pistons apply different forces at both the leading and the trailing edges of the pad to ensure long life•137 x 4B caliper design•Includes brake pads•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1701-0379 For 08-11 FXSTB, FXSTC, FLSTF disc applications $549.95

PART # DESCRIPTION SUG. RETAILFOr 10-11 FlHTCUTG AND FlHXXX MODElS1701-0377 Stage 1 $1,399.95

PART # DESCRIPTION SUG. RETAILFOr 10-11 FlHTCUTG AND FlHXXX MODElS (CONT)1701-0378 Stage 2 $1,999.95

DESCRIPTION PART # SUG. RETAILFrONT WHEElS18” x 3.5” for 08-11 FLTR, FLHT, FLHR, FLHX w/ ABS 0201-1359 $1,349.9518” x 3.5” for 08-11 FLTR, FLHT, FLHR, FLHX, H-D FL trike w/o ABS 0201-1357 1,299.9518” x 3.5” for 00-07 FLTR, FLHT, FLHR 0201-1361 1,299.9521” x 3.5” for 08-11 FLTR, FLHT, FLHR, FLHX w/ ABS 0201-1358 1,449.9521” x 3.5” for 08-11 FLTR, FLHT, FLHR, FLHX, H-D FL trike w/o ABS 0201-1356 1,399.9521” x 3.5” for 00-07 FLTR, FLHT, FLHR 0201-1360 1,399.95

DESCRIPTION LEFT/RIGHT PART # SUG. RETAILrEAr WHEElS15.5” x 5” for 09-11 Left 0202-1577 $899.95 H-D FL Trike models Right 0202-1577 899.9518” x 5.5” for 09-11 Left 0202-1578 899.95 H-D FL Trike models Right 0202-1578 899.9515” x 7” for Lehman Renegade Left 0202-1579 899.95 conversion kits Right 0202-1579 899.95

WrATH CONTrAST CUT™ ONE-piECE AlUMiNUM WHEElS•These forged wheels place the highest material strength in the same direction as the operating load, creating a light and strong wheel

•Contrast Cut™ finish starts with a polished wheel that has been black anodized, then re-cut to open up the design

•Feature the contour rim lip for a graceful arc from rim to lip•Made in the U.S.A.

NOTE: 09-11 FLHT, FLHR, FLHX, FLTR front applications require the use of the OEM spacers.

WrATH CONTrAST-CUT™ TWO-piECE BrAKE rOTOrS•420 stainless steel outer band•Machined Contrast Cut™ aluminum carrier•Contrast Cut™ finish starts with a polished carrier that has been black anodized and then re-cut to open up the design•Specifically designed for use with Performance Machine wheels•Made in the U.S.A.

NOTE: 13” rotor will require the use of PM calipers designed for 13” rotors.

DESCRIPTION PART # SUG. RETAILFOr 00-11 MODElS (EXCEpT 08-11 DrESSErS. H-D Fl TriKE, V-rOD, SpriNGErS, 06-11 DYNA GliDE FrONT)11.5” rotor, front left 1710-1225 $329.9511.5” rotor, front right 1710-1225 329.95

DESCRIPTION PART # SUG. RETAILFOr 00-11 MODElS (EXCEpT 08-11 DrESSErS, H-D Fl TriKE, V-rOD, SpriNGErS, 06-11 DYNA GliDE)13” rotor, front left 1710-1226 $449.9513” rotor, front right 1710-1226 449.95

DESCRIPTION PART # SUG. RETAILFOr 08-11 FlTr/FlHT/FlHr/FlHX, H-D Fl TriKE (FrONT ONlY), 06-11 DYNA (FrONT ONlY)11.8” rotor, front left 1710-1227 $329.9511.8” rotor, front right 1710-1227 329.95

4-piSTON rEAr CAlipEr/ BrAKE KiTS FOr H-D Fl TriKE•Combines Performance Machine’s proven 4-piston calipers with integrated race technology of their master cylinders

•Stage 1 kit includes calipers, master cylinder and brake line

•Stage 2 kit includes calipers, master cylinder, 11.5” brake rotors and brake line

•Made in the U.S.A.

NOTE: Stage II kits require use of 18” rear wheels.

1701-0377 1701-0378

Front wheelTrike rear wheel

7

pOliSHED STAiNlESS STEEl FlANGE WASHEr SYSTEM•This system cleans up the stamped flat edge and stepped look of standard flat washers when used with Race Proof™ 12 Point flange bolt

•Every washer is specifically engineered for each size bolt with several key design features•A precision counterbored hole is CNC-machined for the bolt to sit down inside of the washer – when the bolt is installed in the washer the two flanges meet for an almost seamless look

•All washers also feature a tight tolerance hole with an i.d chamfer to clear the large under head radius on Race Proof™ bolts•To achieve a highly reflective finish a large radius is machined on the edge of each washer – a radius will “shine” and reflect more light than a square edge•Finally each washer is polished, by hand, to a perfect mirror finish•Washers are available for the entire range of bolt sizes from 1/4” through 7/16” in a variety of diameters; conveniently packaged two or four to a pack with

7/16” x 1.062” washers also packaged in a 5-pack for belt sprocket applications•Made in the U.S.A.PART # DESCRIPTION SUG. RETAIL2404-0490 1/4” x .750” (4-pk) $13.952404-0491 1/4” x 1.00” (2-pk) 8.952404-0492 5/16” x .812” (4-pk) 14.952404-0493 5/16” x 1.00” (2-pk) 8.952404-0494 3/8” x .812” (4-pk) 14.95

PART # DESCRIPTION SUG. RETAIL2404-0495 3/8” x .875” (4-pk) $14.952404-0496 7/16” x 1.062” (2-pk) 8.952404-0497 7/16” x 1.062” (5-pk) 22.952404-0498 1/4” x .750” (2-pk) 6.952404-0499 5/16” x 8.12” (2-pk) 7.95

CHrOME BrACKET KiTS FOr TUNED iNDUCTiON Air ClEANErS•Kits feature a support bracket and breather system all in one

•Tuned induction air cleaners 1010-0563, 1010-0564 and 1010-0565 sold separately (see 2011 FatBook, page 398)

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL1013-0075 For 86-03 XL w/ Super E/G series carb $257.95

PART # DESCRIPTION SUG. RETAIL1013-0074 For 91-11 XL w/ stock CV carb & EFI $257.95

SOlENOiD END COVEr/STArTEr BUTTONS•Beautiful T-6 billet aluminum replaces the OEM end cover•Can be used as primary or auxiliary starter button•Available in triple-plated show chrome or wrinkle black powdercoat finish•Install in just minutes with OEM hardware•For use with all 90-11 OEM starters and Terry Components 1.2kw or 1.4kw starters, and 1.6kw or 1.8kw Super Slugger high-torque starters

•Made in the U.S.A.

DiSTriBUTOr rOTOr•Made of brown acrylic•Features a stainless steel “bull nose” tip

BrEAKEr pOiNTS•Includes following and stationary contacts, stationary contact lock nut, and cam lubricant; DOES NOT include stationary contact mounting bracket

•Mounting hardware and instructions also included

CONDENSEr•Zinc plate•Features a long body and scalloped mounting bracket just like the original

BrAKE AND ClUTCH pEDAl pAD SET•Set includes heel and toe pad for clutch pedal and pad for rear brake pedal

•All pads made of black rubber

PART # DESCRIPTION SUG. RETAIL2110-0382 Chrome $79.95

PART # DESCRIPTION SUG. RETAIL2110-0383 Wrinkle black $79.95

PART # DESCRIPTION SUG. RETAIL2105-0105 For 34-53 Indian Chief, Scout, 741 $13.95

PART # DESCRIPTION SUG. RETAIL2105-0102 For 34-53 Indian Chief, Scout, 741 $5.95

PART # DESCRIPTION SUG. RETAIL2105-0104 For 34-53 Indian Chief, Scout, 741 $6.95

PART # DESCRIPTION SUG. RETAIL1611-0031 For 34-53 Indian Chief and Scout $16.95

1013-0075

1013-0074

2110-03822110-0383

8

SADDlEBAG SUppOrT BrACKETS•High-quality OEM-style replacements•Chrome-plated finish•Sold as a set of one left- and one right-side bracket

PART # DESCRIPTION SUG. RETAIL3501-0612 For 09-11 FLHX, FLTRU and

FLTRX; repl. OEM #49206-09A and 49207-09A $119.95

PART # DESCRIPTION SUG. RETAIL1510-0157 For 06-11 FLSTC $49.951510-0158 For 06-11 FXD w/ conventional license plate mount 59.95

PART # DESCRIPTION SUG. RETAILFrONT0214-0570 For 86-99 FLST, FLSTF, FLSTN $58.950214-0577 For 84-87 FXR, 86-87 XL, 85-86 FXE/FXSB 49.950214-0573 For 67-71 FL 49.950214-0572 For 49-65 FL, 66 FL 49.950214-0571 For 36-47 Knucklehead, 48 FL 52.950214-0577 For 84-85 XL 49.950214-0576 For 77-83 XL, FX 49.95

PART # DESCRIPTION SUG. RETAILFrONT (CONT)0214-0575 For 73-77 XL, FX $49.950214-0574 For 52-72 XL, 71-72 FX 49.95rEAr0214-0582 For 80-86 Big Twin 4-speed w/

belt drive (12.4375”) 49.950214-0579 For 58-66 FL (11.250”) 52.950214-0583 For 52-78 XL (10.9375”) 49.95

CHrOME AXlE KiTS•Bright chrome finish on axle and hardware beautifies your bike

•Machined from chrome-moly steel•Kits include axle, spacers, nuts and washers

NOTE: Rear axle length given is measured from the inside of the bolt head to the end of the threads.

TirE MONiTOriNG SYSTEM•Monitors tire air pressure and temperature•Measures air pressure from 10-70 PSI ( ± 2 PSI); also measures in BAR and KPA •Reads internal air temperature from -220F - 1850F ( ± 50F); also reads in Celsius•System includes a handheld remote transceiver with LED display, two sensors that attach to the existing valve stems, tool set, stem nuts, batteries and instructions

PART # DESCRIPTION SUG. RETAIL0363-0044 Tire monitoring system $199.95

FENDEr lUGGAGE rACKS•Chrome-plated rack made of 3/8” steel tubing; carries up to 10 lb.

•Mounts to stock seat mounting screw and license plate bracket

•Mounting hardware and instructions included

1510-0157

1510-0158

0214-0570

0214-0571

0214-0577

0214-0573

0214-0576

0214-0572

0214-0575

0214-0574

0214-05820214-0579

0214-0583

9

FENDEr Tip liGHTS•These tip lights are a perfect fit on OEM and aftermarket front and rear fenders•Clear fender light comes with amber and red bulb•Replacement lenses available separately; see the 2011 FatBook•Sold each

PART # DESCRIPTION SUG. RETAILFOr 99-08 FlT, FlHT2040-0588 Repl. red lens (DOT approved) $6.95

PART # DESCRIPTION SUG. RETAILFOr 99-08 FlT, FlHT (CONT)2040-0591 Repl. smoke lens $7.95

PART # DESCRIPTION SUG. RETAILFOr 09-11 FlT, FlHT2040-0583 Light w/ red lens $51.952040-0587 Light w/ smoke lens 52.95FOr 99-08 FlT, FlHT2040-0580 Light w/ red lens; repl. OEM #59672-99 (DOT approved) 21.95

PART # DESCRIPTION SUG. RETAILFOr 99-08 FlT, FlHT (CONT)2040-0584 Light w/ smoke lens $21.95FOr 04-11 FlST2040-0582 Light w/ red lens; repl. OEM #59683-03 (DOT approved) 21.952040-0586 Light w/ smoke lens 21.95

PART # DESCRIPTION SUG. RETAILFOr 00-11 FlT, FlHT2040-0589 Repl. amber lens (DOT approved) $6.952040-0592 Repl. smoke lens 7.95

PART # DESCRIPTION SUG. RETAILFOr 00-11 FlT, FlHT2040-0581 Light w/ amber lens; repl. OEM

#68706-00 (DOT approved) $21.952040-0585 Light w/ smoke lens 21.95

rEpl. rEAr lENS ONlY

rEpl. FrONT lENS ONlYFrONT liGHTS

rEAr liGHTS

CHrOME TrANSMiSSiON SiDE COVEr•Made from chrome-plated, die-cast zinc

•Mounts with existing hardware

CHrOME TrANSMiSSiON TOp COVErS•High-quality OEM replacement covers•Beautifully complements your other chrome engine and transmission pieces

•Mount using existing hardware

PART # DESCRIPTION SUG. RETAIL1105-0035 For 07-11 FLT/FLHT/FLHR/FLTR/H-D FL Trike; 06-11

FXD, FXDWG; 07-11 FXST/FLST; repl. OEM #37116-06 $54.95

PART # DESCRIPTION SUG. RETAIL1131-2051 For 98-11 Big Twin w/ hydraulic clutch $209.95

PART # DESCRIPTION SUG. RETAIL1105-0033 For 07-08 FLHT, FLHX, FLHR, FLTR; 07-08 FXST/FLST;

06-08 FXD, FXDWG; repl. OEM #34469-06A $49.951105-0034 For 01-06 FLHT, FLHTC, FLHR, FLTR; 00-06 FXST/

FLST; repl. OEM #34541-00 49.95

rEplACEMENT HiGH-FlOW Air FilTEr•Washable and reusable; accordion design provides high airflow with excellent filtration

•Ideal for extended use in dirty and dusty riding conditions•Original K&N High-Flow Technology•American-made for over 35 years

PART # DESCRIPTION SUG. RETAIL1011-2359 For 08-11 XR1200/1200X; repl. OEM #29377-08 $69.95

ClUTCH SpriNG CONVErSiON KiT•Converts your diaphragm spring clutch system to six coil springs

•CNC-machined billet pressure plate•Ideal for stock to high-performance motors

•Allows for more precise adjustment and smoother operation

•Increases the holding capacity of the clutch

•Includes two sets of coil springs to provide three different pressure options

•Utilizes the stock clutch hub, shell and clutch plates•Made in the U.S.A.

2040-0581

2040-0585

2040-0583

2040-0584

2040-0582

1105-00331105-0034

2040-0580

10

HOppE iNDUSTriESThe originator of detachable fairing and audio combinations, Hoppe continues to lead the way with fairing and audio systems that look great, sound exceptional and provide excellent coverage when rolling down the road. While others have tried to jump on this bandwagon with imitations and knock-offs, John Hoppe and wife Debbie make sure they continue to lead the way with fresh new designs and innovative ideas that riders are asking for.

PART # DESCRIPTION SUG. RETAIL2330-0037 For 94-11 FLHR models (except FLHRS) w/ OEM quick-detach windshields $3,995.95

UlTiMATE QUADZillA FAiriNG WiTH STErEO rECEiVEr•An upgrade in style, sound and wind protection

•Constructed of top-quality, hand-laid fiberglass with a gloss black gel-coat that’s ready to paint

•Upgraded Eclipse AM/FM/CD/ USB radio (50Wx4)

•Features include a Sirius Satellite translator and tuner, three-band EQ, USB connection, 3.5mm mini-jack auxiliary input and patch cord, 12V power socket, iPod® cable and plug and Bluetooth with mic

•Stereo comes completely assembled with marine-grade weather door with chrome door bezel and four 5” pre-wired black/chrome speakers•Concealed internal antenna for a clean look•Easy quick-detach connection to bike’s electrical system •Radio hand controls•Solid inner and outer windshield trim•Three pouch storage bag•Pre-wired for CB radio and accessories; additional audio adapter cable/s required, see COVERS, SECURITY & GENERAL section in 2011 FatBook•Kits includes quick-release brackets to mount on OEM windshield docking points or accessory detachable windshield docking points•Includes tinted air wings and 5” tinted windshield; will accept 96-11 FLHT OEM style and aftermarket replacement windshields (sold separately) (some drilling and trimming may be required)

•Made in the U.S.A.

11

PART # DESCRIPTION SUG. RETAIL2330-0006 For 94-11 FLHR models (except FLHRS) with OEM quick-detach windshield $1,695.95

QUADZillA FAiriNG WiTH STErEO rECEiVEr•Classically styled fairing that delivers the ultimate in sound and wind protection•Top-quality hand-laid fiberglass construction, gloss black gel-coated and ready to paint•Includes Eclipse AM/FM/CD/USB radio (40W x4); features auxiliary input, three-band EQ and USB connection•Stereo comes completely assembled with marine-grade weather door and four 5” pre-wired speakers•Concealed internal antenna for a clean, uncluttered look•Easy quick-detach connection to bike’s electrical system•Kit includes quick-release brackets to mount on OEM windshield docking points or accessory detachable windshield docking points•Includes a 12” clear windshield, will accept 96-11 FLHT OEM style and aftermarket replacement windshields (sold separately) (some drilling and trimming may be required)

•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL2330-0036 For 00-11 XL w/ OEM quick-detach windshield mounts $1,099.95

XlS AUDiO BATWiNG FAiriNG•Superb wind protection and great-sounding audio with a classic style•Constructed of hand-laid fiberglass making it stronger than ABS plastic and only 20 lb.•Finished in gloss black gel-coat and ready to paint•Includes two 6” marine grade speakers and amplifier•3.5mm mini-jack MP3/auxiliary input port with detachable 3’ patchcord•Includes 5” clear windshield•Quick-detach power cord allows simple on and off in less than five minutes•Fairing mounts to OEM windshield mounting points•Made in the U.S.A.

NOTE: H-D quick-detach windshield bracket mounts and front directional relocation kit not included with fairing.

12April 2011 | 9901-1016

FEUliNGWith their wide-ranging expertise, the folks at Feuling are able to offer complete camchest kits that provide maximum reliability, peak performance and the coolest engine and oil temperatures going in one single part number. No guess work and no trial-and-error. Just proven combinations of camplate, oil pump, cams, pushrods, lifters and everything else needed for any engine builder to get the most bang for the buck.

Hp+® COMplETE CHAiN DriVE CAMCHEST KiTS•All necessary components from top to bottom of the camchest

•Each part works and functions together in total harmony•Provides maximum reliability, peak performance and the coolest engine and oil temperatures obtainable

•Includes HP+ oil pump, high flow camplate, Reaper camshafts, fast-install pushrods, pushrod tube holder, Timken® bearings, gaskets, O-rings and ARP® hardware

•Choose from a 525 cam kit or a 574 cam kit; see below for cam descriptions

525 CAMS•Designed to increase torque band width and increase fuel economy

•Great bolt-in camshaft upgrade for stock engines•Produces strong low- and mid-range power with linear horsepower and torque curve•Can be used with factory valve springs, pushrods and lifters•Increases throttle response and eases starting•1750-5800 rpm power range

574 CAMS•Wicked power band for modified engines and an excellent bolt in for stock 96” engines; a great all-around camshaft with solid low end performance and mind blowing mid- and top-end power

•Works best with modified cylinder heads, increased compression ratio, performance exhaust and intake systems

•Performance valve springs required on 99-04 engines and performance pushrods and lifters recommended

•2000-6800 rpm power range

PART # DESCRIPTION SUG. RETAILFOr 09-11 FlHT, FlHX, FlHr, FlTr AND H-D Fl TriKES1111-0011 Polished $159.951111-0012 Black anodized 149.95

TOUriNG FrAME STABiliZErS•CNC-machined aluminum, stainless steel HIEM joints and stainless mounting hardware

•Prevent frame flex, frame wobble and motor oscillation•Improve handling and overall safety•Top-side design provides for a quicker, easier installation•Work with stock exhaust and most aftermarket exhaust systems•Made in the U.S.A.

PART # DESCRIPTION SUG. RETAILFOr 99-06 TWiN CAM (EXCEpT 06 DYNA GliDE)0925-0533 525 cam kit $1,595.950925-0534 574 cam kit 1,595.95

PART # DESCRIPTION SUG. RETAIL2030-0559 For 97-08 FLT/FLHT $29.95

liCENSE plATE BAr EliMiNATOr•Preserve the stock saddlebag support brackets when removing the license plate support tube

•Sold in pairs•Made in the U.S.A.

0925-0534

1111-0011

1111-0012