4 inch AIR ANGLE GRINDER CT1083ORIGINAL INSTRUCTIONS

Cannon Tools LimitedAddress: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.

SAVE THESE INSTRUCTIONS AND PRECAUTIONS.READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.

EC DECLARATION OF CONFORMITYWe CANNON TOOLS LTD20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K.

Declare that the following machine complies with the appropriate basic safety and health requirements of the EC Directive based on its design and type, as brought into circulation by us.

In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity.Product description:4 inch AIR ANGLE GRINDER Model: CT1083

Applicable EC Directives:EC Machinery Directive 2006/42/EC Harmonized standardsEN ISO 11148-9: 2011

20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.Mr. Gurcharan Tony Singh SangheraManaging Director

CANNON TOOLS LTD

2017-03-15

1

1.SAFETY INSTRUCTIONSSYMBOLS

In this manual and/or on the machine the following symbols are used:

Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of the instructions in this manual.

Wear hearing protection.

Wear safety goggles.

Contact with or inhalation of dust coming free during use (e.g. lead-painted surfaces, wood and metal) can endanger your health and the health of bystanders. Always wear appropriate protective equipment, such as a dust mask. Always use proper dust extraction during use.

Wear gloves.

Protect yourself and your surroundings by preventing any accident risks.Pneumatic tools should not be used for any other purpose than it has been designed for.Pneumatic tools should be kept away from children.Work only once you are fully concentrating and feel rested. Use a coupling with a quick closing device for pneumatic connection.Working pressure should be set using the control valve.Do not use oxygen or gaseous fuel as energy supplies.Disconnect the machine from the compressed air supply before starting to repair a possible defect.Use only original spare parts.Don’t let the machine run unloaded at full idle speed.Wear necessary protective clothing when working with pneumatic tools.

2

3

4

5

PARTS DIAGRAM:

PARTS LIST:

Cannon Tools LimitedAddress: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. Made in China