4 in 1 wireless controller

USER MANUAL

WIRELESS PRO CONTROLLER FOR N- SWITCH/PS3/PC/Android

This is a wireless Pro controller mainly for Nintendo Switch; Compatible on PC（XP and system above）/Android /PS3 devices.

（note：Not all buttons are placed in the same position）

APPLICATION：

1

FEATURES：

1）Same standard with original Switch Pro controller such as all the buttons，engine， motion sense etc.2）4 Red LED Indicator.3）Six axis gyroscope.4）16 function input buttons ，supporting TURBO.5）Built in dual engines，3D Joysticks with the precision of level 256.6）Elaborate Button Pressing, Easy for operation.7）Compatible with PC(support X_input and D_input mode).

BUTTON DESCRIPTION：

2

TURBO Button

[-] Button

[L1] Button

Directional Pad

Left AnalogStick/L3

HOME ButtonLED Indicator

Screenshot

[+] Button

[R1] Button

Action Buttons (Y, X, B, A)

Right AnalogStick/L3

Activate & Deactivate: press and hold any buttonand then press TURBO

[R2] Trigger[R2] Trigger

RESET

TYPE-C Port

RESET BUTTON

Triggers on the shoulderand the back of the controller

There is a hole for the RESET button at the back of the controller

Triggers on the shoulderand the back of the controller

3

1.Devices Available and Connection Process To Connect with Switch

B+nottub EMOH eht dloh dna sserp，”egap redrO/pirG egnahC“ dnfi ,emit tsrfi eht roF button for 3 seconds to search(LED 2 flash) and sync(LED 1 stays on) For the second time or more, simply press the HOME button to turn the controller on(LED 2 blinks) and it get automatically connected. (LED 11 stays on) To Connect with PS3

Support the PS3 platform to switch the PS3 mode to the PS3 mode. The PS3 mode is A+HOM. When the four lights are flashing, plug in the data cable and press the A key to confirm that the host is connected to the host and the corresponding channel will be displayed. After unplugging the data line light, press HOME to turn on the channel light of 1.2.3.4. It is similar to the standard P3 Bluetooth controller. After connecting, it will display to the corresponding channel.

To Connect with Laptop or Android Phone For the first time, press and hold the HOME button+Y button for 3 seconds to start(LED 1

yllufsseccus nehW .cnys dna ”dapemaG“ hcraes ot htooteulb eht nepo neht, )hsafl connected, LED 1 stays on. For the second time or more, simply press the HOME button 1 second to turn the controller on and it get automatically connected (LED1 blinks). When successfully connected, LED 1 stays on. To Connect with Desktop PC Press and hold L1 + HOME to start( LED 4 flash), then connect each side with the USB cable.(Support D/X mode, the D/X mode can be reversed by long press Home button for 5 seconds.)2. Charging Indication All four LED lights will flash slowly.when it is fully charged，all lights out. If the controller is charging through USB,only one LED will flash slowly，the LED will stay bright when it is fully charged.3. Low Battery Alert If the controller battery is low, the relevant LED light will flash slowly.4、Shut-Down To turn the controller off, Hold the HOME button for 5 seconds when it is not connected to any console，10 seconds when connected.5. About The Upgrading No driven USB is required for upgrading.6. Reset Please try to reset the controller if it gets stuck at any time. You will find the reset button in a small hole on the back of the controller. 7. The Signal Receiving Distance The receiving distance is varied from 8 to 10 meters according to the circumstances.

Description of Function：

4

HOME Menu

Continue

Featured News

5:00 90%PM

”.srellortnoC“ esoohC .3

Controllers

OK

5:01 90%PM

.”redrO/pirG egnahC“ kcilc ,egap ”srellortnoC“ eht gniretne retfA .4

Controllers

No other controller are connected.

Close

Console

Pair New Controllers

Change Grip/Order

2. Press A or the HOME button to enter the main menu.

CONNECTION INSTRUCTIONS:1. Press the Power button to turn the Switch console on.

5

sdnoces 3 rof nottub B+nottub EMOH eht dloh dna sserp，”egap redrO/pirG egnahC“ eht gniretne retfA .5 to search and sync**Note: The LED 2 will be flashing fast while searching is in progress.

Two players are also supported.

-/+ Controller Not Connecting Back

1 2 3 4

Press When you’re ready

Press on the controller.

6. You will see the image of a controller on the page. Once connected, it will be displayed on the .egap ”redrO/pirG“

**Note: Once the connection is made, only the LED 1 will be on.

Two players are also supported.

-/+ Controller Not Connecting Back

2 3 4

Press When you’re ready

Press on the controller.

7. Last and the most important part:to press A to complete the connection. After this, the Switch .tes lla era uoy neht tixe ot nottub B ro EMOH sserp ,”srellortnoC“ egap eht ot nruter lliw

Controllers

Close

Console

Controllers

Pair New Controllers

Change Grip/Order

6

SAFETY PRECAUTIONS• Do NOT expose the product to hot or cold temperatures or close to any heat source such as ovens or direct sunlight.• Do NOT use in areas of high humidity or if wet from water or other liquids.• Do NOT open, bend, service else trying to modify the product in any way, as this can cause electrical shocks,short circuit or damage.• Only clean with a soft, dry cloth, not using any type of solvents or chemicals.• If you experience any discomfort from the use of the product, stop using it and seek medical help. If it caused by the vibration function of the product, switch this function of in your console settings, if it is caused by strong lights, stop playing and turn off the console and seek medical help.• Don’t forget to take breaks when playing for a long time.

BASIC SPECS：Battery

Battery volume

Battery life

Charging hours

Charging current

Charging port

Built in Li-polymer

500mAh

10 hours（Rechargeable）

2.5 hours

USB DC5V/350mAt

TYPE-C

OTHER REMARKS：1. Using the HOME button on the PRO-S Controller will NOT turn on the console.2. Motion control and NFC functions are not supported on Controller.3. Please try to reset the controller if it gets stuck at any time. You will find the reset button in a small hole on the back of the controller.4. To hard boot your console, press and hold the POWER button for 12 seconds.