3W High Power Led Lamp YJ P20SB3R Asia Manufacturer and Supplier

Embed Size (px)

Citation preview

  • 8/12/2019 3W High Power Led Lamp YJ P20SB3R Asia Manufacturer and Supplier

    1/5

    Tel+86-755-88868631 FAX+86-755-88863251 [email protected] Websitehttp://www.aglare.cn

    AddFactory A, Supply and Marketing Cooperative Park Guanlan Avenue, Guanlan Town Bao'an District, Shenzhen City, Guangdong, China

    SHENZHEN AGLARE LIGHTING CO., LTD.

    CustomerProduct YJ-P20SB3R

    Part No.Ref. No

    Date 2010-07-18

    Made by Shenzhen Aglare Lighting Co. Ltd

    Production Dept Q.C. Dept Engineering Dept Marketing Dept

    Wen Liu Fang Yang Jiang Yang Fang Wang

    Specification for Approval

    Approved by

    Engineering Dept Production Dept Q.C. Dept Manager

  • 8/12/2019 3W High Power Led Lamp YJ P20SB3R Asia Manufacturer and Supplier

    2/5

    Tel+86-755-88868631 FAX+86-755-88863251 [email protected] Websitehttp://www.aglare.cn

    AddFactory A, Supply and Marketing Cooperative Park Guanlan Avenue, Guanlan Town Bao'an District, Shenzhen City, Guangdong, China

    SHENZHEN AGLARE LIGHTING CO., LTD.

    1.Features:

    High-power LED with 1 or 3W Power and 350to 750mA Forward Current

    1: Emitting colors: Red, Green, Blue, Yellow,

    Pure white and Warm white

    2: Part Number: YJ-P20SB3R

    3: High-power LED

    3: Forward voltage: 1.8 to 4.0V

    4: Forward current: 350 to 750mA

    5: Power: 1 or 3W

    6: Big viewing angle: 150 degrees

    Picture:

    2.Package Dimensions (mm)

  • 8/12/2019 3W High Power Led Lamp YJ P20SB3R Asia Manufacturer and Supplier

    3/5

    Tel+86-755-88868631 FAX+86-755-88863251 [email protected] Websitehttp://www.aglare.cn

    AddFactory A, Supply and Marketing Cooperative Park Guanlan Avenue, Guanlan Town Bao'an District, Shenzhen City, Guangdong, China

    SHENZHEN AGLARE LIGHTING CO., LTD.

    3.Absolute Maximum Rating at TA=25Part

    Number

    Chip

    Material Lens Type

    Emitting

    Color

    Dominant

    Wavelength

    Luminous

    Flux(Lm) IF (mA)

    Wattage(W)

    MIN MAX MIN MAX TYP

    YJ-P20SB3

    RAlGaInPWater Clear Red 620 635 60 100 750 3W

    YJ-P20SB3

    GInGaN Water Clear Green 515 530 105 150 750 3W

    YJ-P20SB3

    BInGaN Water Clear Blue 460 475 17 24 750 3W

    YJ-P20SB3

    Y

    AlGaInPWater Clear Yellow 585 595 50 80 750 3W

    YJ-P20SB3

    WInGaN Water Clear Pure White / / 105 150 750 3W

    YJ-P20SB3

    WWInGaN Water Clear Warm White / / 75 120 750 3W

    4.Characteristic:

    Electro-Optical characteristics ( Pure White) Ta=25C

    ParameterTest

    ConditionSymbol

    ValueUnit

    Min Typ Max

    Color temperature If=750mA 5000 6500 K

    Forward voltage If=750mA 1.8 4.0 V

    Lumen Value If=750mA 105 130 150 LM

    Viewing angle at 50% IV If=375mA -- 150 -- Deg

    Useful life IF=750mA 50000 100000 H

    Operating temperature range -25 40 C

    Storage temperature range -30 80 C

    5.Lumen Decrease

    Operating time ( hours ) Lumen decrease 1500 8

    7500 15

    20000 20

  • 8/12/2019 3W High Power Led Lamp YJ P20SB3R Asia Manufacturer and Supplier

    4/5

    Tel+86-755-88868631 FAX+86-755-88863251 [email protected] Websitehttp://www.aglare.cn

    AddFactory A, Supply and Marketing Cooperative Park Guanlan Avenue, Guanlan Town Bao'an District, Shenzhen City, Guangdong, China

    SHENZHEN AGLARE LIGHTING CO., LTD.

    6.Points For Attention

    (I) SOLDER CONDITIONSi Iron Soldering: the Iron ( max 30W) end temperature less than 300, soldering time3 seconds, soldering position is

    minim 2mm from body.

    ii Dip Soldering: Max temperature is 260, time 5, the position is minim 2mm from body.

    (II) PIN MOULDING METHOD

    i Bracket must be bent only if 2mm from colloid.

    ii Bracket mould must be finished by fixture or professionals.

    iii Bracket mould must be finished before soldering.

    iv Bracket mould should assure the consistent between the pin, the distance gap of leads and thecircuit board.(III)LED ASSEMBLY METHOD

    i. It should be pay attention to the ordering of all the devices in case of wrong polarity. Devices cant be too close to the

    heat components, working conditions cant surpass the limits.

    ii. It should not assemble LED when the leads are deformed.

    iii. When decide to assemble in holes, accurately account the sizes of holes and holes distance of the line base

    iv. Suggest using guard sheath positioning

    v. It should avoid any kinds of quake or force on LED, before the soldering temperature returns normal.

    (IV) CLEANINGIt should be very cautious. When clean the body with chemicals. Some chemicals may bring damages to the surface,

    and bring color fading, such as, Trichloroethylene, Acetone. Should use ethanol to wipe, dip for no more than 3 minutesunder the normal temperature.

  • 8/12/2019 3W High Power Led Lamp YJ P20SB3R Asia Manufacturer and Supplier

    5/5

    Tel+86-755-88868631 FAX+86-755-88863251 [email protected] Websitehttp://www.aglare.cn

    AddFactory A, Supply and Marketing Cooperative Park Guanlan Avenue, Guanlan Town Bao'an District, Shenzhen City, Guangdong, China

    SHENZHEN AGLARE LIGHTING CO., LTD.

    7.Typical electric performance graphs

    8. After-sales service

    All products are guaranteed to use in one year. Under the right and normal using condition, quality warranty is

    based on correct conservation, assemblage, and maintenance. As incorrect usage, and disobeying product

    operation, its not guaranteed. To the problem within promised time, Aglare will solve it by repair, substitute

    accessories or replacement for your option. Upon exceeding the promised time, there will be material and

    maintenance fees to be paid by customers.

    TEL+86-755-88868631 FAX+86-755-88863251 E-mail: [email protected]