3U VPX - Ipeco · IPECO Established in 1975, we are part of the Ipeco Holdings Ltd group of specialised engineering companies. We specialise in the design, development and manufacture

The 3UVPX2503P-01, qualified in-system and in service since 2016.

The 3UVPX2206V-01, qualified in-system and in service since 2015.

THEPOWERBEHINDYOURSYSTEMS

www.ipeco.com Telephone: +44 (0)1480 216 516

This PSU meets MIL-STD-461F and DO-160G when used with Input Filter IF003.Integral hold up across steady state input range:• ≥5ms @ 220W

DC input: 22 to 32V DC outputs (@ full loads):• 12V @ 17A • 3.3V @ 3.3A • 5V @ 2A • 3.3V_aux @ 1.6A • +12V_aux @ 1A • -12V_aux @ 0.1A

This PSU meets MIL-STD-461F and Def Stan 59-411 pt3 when used with Input Filter IF002. Integral hold up with a steady state input of 28V:• ≥50ms on 5V @ 36A • ≥70ms on 3.3V @ 6A

DC input: 22 to 29VDC outputs (@ full loads):• 5V @ 45A • 3.3V @ 6A • 12V @ 2A

If none of the above quite meets your requirements, as an OEM we can produce Modified off the Shelf (MOTS) versions. Alternatively, we offer a full custom design service that includes electrical and thermal modelling, manufacture, test and inspection. We also have on-site facilities for many environmental tests and can explore a prototype’s EMC profile.

We have a range of proven and qualified in-system 3U VPX power supplies, available now1 as Commercial off the Shelf (COTS) units. All are ruggedized, low mass, high power density and suitable for air, land and sea applications.

1 We maintain a sample stock of each power supply. Availability is subject to stock not being out on loan.All power supplies are available now as COTS and are available as RoHS and Non-RoHS with tin whiskers mitigation.

3U VPXPOWER SUPPLY RANGE

This PSU meets DEF-Stan 59-411 Land Class A when used with Input Filter IF001.Integral hold up is available.

DC input: 17.5 to 32V DC outputs (@ full loads):• 5V @ 15A • 3.3V @ 7A • 12V @ 7A


I P E C O

Established in 1975, we are part of the Ipeco Holdings Ltd group of specialised engineering companies. We specialise in the design, development and manufacture of VPX, VME and full custom power supplies, chassis and backplanes for use in defence; aerospace, telecommunications and other demanding embedded applications. Why Ipeco Electronics for power supplies, chassis and backplanes?• Reduced NREs• Shorter development times• Earlier access to the PSU• Reduced project risks (i.e. single supplier for PSU, chassis and backplane)• Higher confidence during the development and verification of your system• Through-life product support We are qualified to ISO BS EN 9001: 2008 and our quality control system provides complete lifecycle traceability; from product concept, through design, manufacture, test, supply, service and repair.

Our standard range comprises:• IF001 – Makes our 3UVPX2003P-01 compliant with

DEF-Stan 59-411 Land Class A• IF002 – Makes our 3UVPX2503P-01 compliant with

MIL-STD-461F and Def Stan 59-44 part 3.• IF003 – Makes our 3UVPX2206V-01 compliant with

MIL-STD-461F and DO-160G

INPUT FILTERS

HOLD-UP CARDS

LOAD CARDS

3U VPXACCESSORIES


We can make hold-up cards to act as power reservoirs. In the event of the loss of power to your LRU, and acting on a signal from the PSU, your cards can draw on that reservoir; giving them more time to complete their tasks.

Hold-up is available within (integral to) some of our 3U VPX power supplies. It can also be added as an extension. Please contact us for further details.

To support the earliest possible assessment of your LRU as a ‘system load’, we can produce load cards to represent your intended I/O, processor and other cards.

Just give us the anticipated electrical loads, an indication of expected device hotspots and the weights of your cards and we will produce load cards with appropriate electrical and physical characterstics.

Ipeco Electronics Vincent House, Alington Road, Little Barford, St. Neots, Cambridgeshire, PE19 6YH, United Kingdom


Transient protection: The 3UVPX2003P-01 is qualified in-system to Def Stan 61-5 Part 6 Issue 6 (when used with an external filter) including a DC ‘load dump’ of 174V for 350ms.

D C I N P U T : 17.5 to 32V

B E N E F I T S I N C L U D E

• Reliable and proven in the field, the 3UVPX2003P-01 is suitable for air, land and sea applications.

• The 3UVPX2003P-01 is available now as a COTS PSU and we maintain a sample stock.

• As an OEM, and thanks to the modularity of our PSU designs, modified versions of the 3UVPX2003P-01 can be produced quickly.

5V• 15A (full load)• Regulation: 4.88 to 5.25V

Ripple/Noise for all outputs:• ≤50mV

3.3V• 7A (full load)• Regulation: 3.25 to 3.45V

12V• 7A (full load) • Regulation: 11.52 to 12.48V

3U VPX P47 200W (continuous)O U T P U T S 5V, 3.3V & 12VI P E C O R E F 3UVPX2003P-01DEF-Stan 59-411 Land Class A (when used with IF001)Available Now1

Hold-up available2

Non-RoHS3

D C O U T P U T S



1 Subject to stock not being out on loan.2 Integral hold-up is available. Please contact us for details.3 This product can be produced as RoHS or non-RoHS with tin whiskers mitigation.


Telephone +44 (0)1480 216 515

Email [email protected]

Website www.ipeco.com

Ipeco ElectronicsVincent House Alington Road Little Barford

St. NeotsCambridgeshire

PE19 6YH United Kingdom

C O N T A C T U S

The IF001 input filter, needed for the 3UVPX2003P-01 to meet DEF-Stan 59-411 Land Class A.

A C C E S S O R I E S

Our 3U VPX chassis are available as full and ½ ATR systems.

Not found exactly what you need?

If the 3UVPX2003P-01 doesn’t quite meet your requirements we have a number of other 3U VPX PSUs in our product range. We also offer modified off the shelf (MOTS) power supplies and a full-custom design service.

S E A

Efficiency: • 75 to 80% (>70% loadings)• 70 to 75% (50% to 70%

loadings]

No load operation.

Output Enable.

Alarms:• PSU Good• I/P Fail• Internal Temp > 95oC

Isolation (≥20MΩ)• Input to output: 500V• Input to case: 500V• Output to case: 100V

Unit Protection:• Overvoltage• Overtemp• Overcurrent• Short Circuit• Reverse input

Mass: ≤750g

Dimensions: This PSU follows the 3U VPX form factor.

Cooling: Conduction.

Temperature:• Operating (card edge):

-40 to 85oC• Storage: -55 to 105oC.

EMC & Environmental: The 3UVPX2003P-01 meets Def Stan 58-411 when used with front end filter IF001. It also meets the altitude, shock, vibration and humidity requirements of Def Stan 00-35. The finish is Iridite NCP, to MIL-DTL-554 Type 2 Class 3, and the PSU has a conformal coating.

Please contact us for detailed dimensions, drawings and other technical information.

© Ipeco Electronics. Product Sheet print date: January 2018. Information and related data are subject to change without notice. The Air, Land and Sea images used on this Product Sheet are public sector information, licensed under the Open Government License v1.0.

A I R

L A N D


Transient protection: The 3UVPX2503P-01 is qualified in-system to Def Stan 61-5 and MIL-STD-704F (when used with an external filter) including 100V for 50ms.

D C I N P U T : 22 to 29V


• Reliable and proven in the field, the 3UVPX2503P-01 is suitable for air, land and sea applications.

• The 3UVPX2503P-01 is available now as a COTS PSU and we maintain a sample stock.

• As an OEM, and thanks to the modularity of our PSU designs, modified versions of the 3UVPX2503P-01 can be produced quickly.

5V• 45A (full load)• Regulation: 4.88 to 5.25V• Ripple/Noise: ≤50mV

3.3V• 6A (full load)• Regulation: 3.25 to 3.45V• Ripple/Noise: ≤50mV

28V_filtered• 2A (full load)• Non-isolated rail

3U VPX P47 250W (continuous)O U T P U T S 5V, 3.3V and 28V_filteredI P E C O R E F 3UVPX2503P-01MIL-STD-461F & Def Stan 59-411 pt3 (when used with IF002)Available Now1

Hold-up2: ≥50ms on 5V ≥70ms on 3.3VNon-RoHS3

D C O U T P U T S



1 Subject to stock not being out on loan.2 Integral. ≥50ms on 5V @ 36A and ≥70ms on 3.3V @ 6A with steady state 28V input3 This product can be produced as RoHS or non-RoHS with tin whiskers mitigation.


Telephone +44 (0)1480 216 515






C O N T A C T U S

The IF002 input filter, needed for the 3UVPX2503P to meet MIL-STD-461F.




If the 3UVPX2503P-01 doesn’t quite meet your requirements we have a number of other 3U VPX PSUs in our product range. We also offer modified off the shelf (MOTS) power supplies and a full-custom design service.

S E A


loadings)

No load operation.

Output Enable.




Mass: ≤750gDimensions: This PSU follows the 3U VPX form factor.




EMC & Environmental: The 3UVPX2503P-01 meets MIL-STD-461F in-system when used with front end filter IF002. It also meets the altitude, shock, vibration and humidity requirements of MIL-STD-810G. The finish is Iridite NCP, to MIL-DTL-554 Type 2 Class 3, and the PSU has a conformal coating.



A I R

L A N D


Transient protection: The 3UVPX2206V-01 is qualified in-system to MIL-STD-461F and DO-160G (when used with an external filter) including survival at 55V for an extended 500ms.



• Reliable and proven in the field, the 3UVPX2206V-01 is suitable for air, land and sea applications.

• The 3UVPX2206V-01 is available now as a COTS PSU and we maintain a sample stock.

• As an OEM, and thanks to the modularity of our PSU designs, modified versions of the 3UVPX2206V-01 can be produced quickly.

VS1 = 12V• 17A (full load)• Regulation: 11.4 to 12.6V

3.3V_aux• 1.6A (full load)• Regulation: 3.135 to 3.465V

Ripple/Noise for all outputs:• ≤50mV

VS2 = 3.3V• 3.3A (full load)• Regulation: 3.25 to 3.45V

+12V_aux• 1A (full load)• Regulation: 11.4 to 12.6V

VS3 = 5V• 2A (full load) • Regulation: 4.875 to 5.25V

-12V_aux• 0.1A (full load)• Regulation: -11.4 to -12.6V

3U VPX VITA 62 220W (continuous)O U T P U T S 12V, 3.3V, 5V, 3.3_aux +12V_aux and -12V_auxI P E C O R E F 3UVPX2206V-01MIL-STD-461F and DO-160G (when used with IF003)Available Now1

Hold-up2: ≥5msNon-RoHS3

D C O U T P U T S


1 Subject to stock not being out on loan.2 Integral. ≥5ms @ 220W across steady-state input range3 This product can be produced as RoHS or non-RoHS with tin whiskers mitigation.

The 3UVPX2206V-01, qualified in-system and in service since 2015.


Telephone +44 (0)1480 216 515






C O N T A C T U S

The IF003 input filter, needed for the 3UVPX2206V-01 to meet MIL-STD-461F and DO-160G.



If the 3UVPX2206V-01 doesn’t quite meet your requirements we have a number of other 3U VPX PSUs in our product range. We also offer modified off the shelf (MOTS) power supplies and a full-custom design service.

S E A


loadings)

No load operation.

Output Enable & Inhibit.




Mass: ≤750gDimensions: This PSU follows the 3U VPX form factor.


Temperature:• Operating (card edge):• -40 to 85oC• Storage: -55 to 105oC.

EMC & Environmental: The 3UVPX2206V-01 meets MIL-STD-461F and DO-160G in-system when used with front end filter IF003. It also meets the altitude, shock, vibration and humidity requirements of MIL-STD-810G. The finish is Iridite NCP, to MIL-DTL-554 Type 2 Class 3, and the PSU has a conformal coating.



A I R

L A N D



Transient protection: The 6UVME2866-01 is qualified in-system to Def Stan 61-5 (excluding 174V 350ms load dump) and Def Stan 59-411 (when used with an external filter)



• Reliable and proven in the field, the 6UVME2866-01 is suitable for air, land and sea applications.

• The 6UVME2866-01 is available now as a COTS PSU and we maintain a sample stock.

• As an OEM, wholly in-house proven PSU designs allows repackaging flexibility for custom requirements, and modified versions of the 6UVME2866-01 can be produced quickly.

5V• Up to 32A• Regulation: ±0.15V

-12V• Up to 2.5A• Regulation: ±0.36V

3.3V• Up to 20A• Regulation: ±0.12V

5V_SB• Up to 0.24A• Regulation: ±0.2V

+12V• Up to 2.5A • Regulation: ±0.36V

28V_protected• Up to 3A• Tracked to I/P: 15.5 to 35V5

6U VMEO U T P U T P O W E R 286W1

O U T P U T S 5V, 3.3V, +12V, -12V, 5V-SB and 28V_protectedI P E C O R E F 6UVME2866-01Def Stan 61-5 & Def Stan 59-411 (when used with IF004)Available Now2

(with or without nuclear circumvention circuitry)Hold-up3: ≥4msNon-RoHS4

D C O U T P U T S


1 Output power is derated above 65oC. Please contact us for further information.2 Subject to stock not being out on loan.3 Integral ≥4ms with 5V @ 25A, 3.3V @ 10A, +12V @ 2A, -12V @ 1A. Excludes 5V_SB and 28V_protected outputs.4 This product can be produced as RoHS or non-RoHS with tin whiskers mitigation.5 Output from the 28V Input is protected from input transients and reverse polarity but is unregulated.

The 6UVME2866-01, qualified in-system and in service since 2009.


Telephone +44 (0)1480 216 515






C O N T A C T U S

The IF004 input filter, needed for the 6UVME2866-01 to meet Def Stan 59-411.

6U VME chassis are available in a variety of configurations.


If the 6UVME2866-01 doesn’t quite meet your requirements we have a number of other 6U VME PSUs in our product range. We also offer modified off the shelf (MOTS) power supplies and a full-custom design service.

S E A

Efficiency: • 72% at Max Loadings

No load operation.

Output Enable.

Alarms:• PSU Good• I/P Fail• Sys Reset• Temp Warning• Internal Temp >100oC

Isolation (≥20MΩ)• Input to output6: 250V• Input to case: 100V• Output to case: 100V


Mass: ≤1.4kgDimensions: This PSU follows the 6U VME form factor.

Cooling: Conduction. Please note, output power is derated above 65oC. Contact us for further information.



EMC & Environmental: The 6UVME2866-01 meets Def Stan 59-411 in-system when used with front end filter IF0047. It also meets the altitude, shock, vibration and humidity requirements of Def Stan 00-35. The finish is Chromate conversion to Def Stan 03-18 and the PSU has a conformal coating.



A I R

L A N D


6 Except 28V_protected output.7 Housed in a Faraday enclosure in-system; additional high frequency filtering components may be necessary.

6U chassis

3U chassis (liquid cooled)



In a recent test a ½ ATR Short 3U chassis was fi tt ed with liquid cooled side panels. With a PSU and seven load cards (representi ng a total load of 750W) and a coolant fl ow rate of 1.5 litres per minute the liquid cooling not only evened out thermal loading but it also indicated a total load of 1.2kW could have been accommodated at 55oC ambient.

Our 6U chassis are also lightweight, rugged, sealed to IP 68, modular and can be liquid cooled. Recent 6U chassis designs have also included lockable compartments.

In additi on to off ering COTS power supplies - and our ability to produce MOTS variants - we also design and manufacture chassis and backplanes. We are therefore your one-stop-shop Power Platf orm Partner, freeing you to focus on the development of your processing, I/O and other system cards. We also manufacture 3U and 6U load cards, which can be used in the chassis along with a PSU for system electrical loading and thermal analysis. Examples of chassis include…

Chassis &Backplanes

Our 3U chassis are lightweight, rugged and water ingress protected to IP 68. They are modular in design, allowing parts to be replaced. In additi on, side panels can be upgraded to liquid-cooled to enable greater heat exchange (see below).

3U chassis (conducti on cooled)

ATR SELECTION

ARINC 404ATR size

DWARF1/4 SHORT1/4 LONG

3/8 SHORT3/8 LONG

1/2 SHORT

ARINC 600MU size

1MCU2MCU2MCU3MCU3MCU4MCU

Max 3Uslots1

122338

Max 6Uslots1

022335

ARINC 404ATR size

1/2 LONG3/4 SHORT3/4 LONG1 SHORT1 LONG3/2 LONG

ARINC 600MU size

4MCU6MCU6MCU8MCU8MCU8MCU

Max 3Uslots1

151012121520

Max 6Uslots1

588

1015

15+

1 Depending on configuration

I P E C O

Established in 1975, we are part of the Ipeco Holdings Ltd group of specialised engineering companies. We specialise in the design, development and manufacture of VPX, VME and full custom power supplies, chassis and backplanes for use in defence; aerospace, telecommunications and other demanding embedded applications. Why Ipeco Electronics for power supplies, chassis and backplanes?• Reduced NREs• Shorter development times• Earlier access to the PSU• Reduced project risks (i.e. single supplier for PSU, chassis and backplane)• Higher confidence during the development and verification of your system• Through-life product support We are qualified to ISO BS EN 9001: 2008 and our quality control system provides complete lifecycle traceability; from product concept, through design, manufacture, test, supply, service and repair.

Chassis & BackplanesACCESSORIES


Ipeco Electronics Vincent House, Alington Road, Little Barford, St. Neots, Cambridgeshire, PE19 6YH, United Kingdom

Our backplanes are available as RoHS or non-RoHS compliant, depending on your requirements, plus we can provide complete traceability of parts and materials.

Backplanes can be built to accommodate mixed-technology connectors. For example, a VPX backplane can carry P47 and VITA 62 connectors. Also, to support your development activities, backplanes can be fitted with communications ports (e.g. Ethernet connectors) and test points.

Our VPX and VME backplanes are typically project-specific and built to order. Moreover, if you discuss your overall power, chassis and backplane requirements with us early on in your programme, it may transpire that a pre-qualified COTS PSU already exists. As your Power Platform Partner we’re able to support the development of your system.

Documents

3U VPX - Ipeco · IPECO Established in 1975, we are part of the Ipeco Holdings Ltd group of specialised engineering companies. We specialise in the design, development and manufacture