2

The 3rd Generation Velocitec Cam has Dynamic Load Balancing, eliminating cam lean issues...

Patent # 6,425,780 b1

Alpine Archery has long been known as an innovator in the industry. With Innovation comes improvement. For 2010, Alpine Archery is improving the Velocitec system yet again. Introducing the Velocitec 3G! Based on the same tried and true platform of the Velocitec cam, the 3G has features that not only enhance the performance of the bow, but create the most user friendly, powerful, and shootable system available in the entire archery industry. The Velocitec 3G will soon be hailed as the premier cam with the full combination of speed, power, smoothness, and overall shootability. We have added a platform under the module on the bottom cam to allow the power buss to create a smooth, quiet transition into the groove to complete the draw cycle. The use of the dual payout grooves are specific to keeping the transfer of load balanced and reducing the proverbial “cam lean”… Alpine has refined this by helically machining the payout grooves on the 3G Cam. This measure ensures perfect cam balance in both static and dynamic positions while keeping the balance through the entire draw cycle and maintains that balance during the shot sequence. All this provides you with the most accurate cam system available. And you thought the i-phone was technical!

The illustration at the right shows the take-up grooves on the 3G Velocitec Cam with the new helical groove on the cam. The dotted lines represent the path the yoke harness will follow as the cam is drawn. The solid lines represent the path the yoke would follow on a cam without helical milling of the groove.

The 3rd Generation...

Alpine Ball Bearing Technology...Patent #6,415,780

As the cam is drawn, the force applied to the limbs change from one side to the other, which normally induces cam lean. Alpine’s exclusive “Dynamic Load Balancing System” with helical grooves machined into the new Velocitec 3G Cam System, move the balance point of the limb laterally in a continuous motion as the cam is drawn, thereby following the load change and keeping the cam straight, throughout the entire draw cycle.

T h e d o t t e d l i n e s represent the path the yoke will follow to maintain a lateral shift of about .050 of an inch.

2 3

Jim Shockey Signature Series Yukon...As rugged as its namesake…...

Licensed under Patent

#6,990,970B-1

By now, most of you have seen or heard that Jim Shockey is bowhunting again. To build a bow for Jim, we at Alpine knew it had to be rugged, dependable, and full of character. In 2009, we introduced the Yukon as the only bow fit to wear the Shockey name. We knew this bow must not only meet, but exceed Jim’s expectations. Thus the Jim Shockey Signature Series Yukon was born. As a mid-year addition to our lineup, it quickly became the most widely sought after bow in our already impressive 2009 roster.

The Yukon’s riser is coated in an attractive black wrinkle powder coat finish, while the limbs are film dipped in Realtree Hardwoods HD. The custom string dampener, that employs the Sims decelerator module, compliments the already impressive noise and vibration control built into the Yukon. This bow is accented by an antiqued medallion and checkered wood grip sporting Jim’s initials. A set of red and black pre-stretched Stone Mountain “Dakota” Bowstrings and a fiberlok shelf pad add to the rich character of this bow. Whether you are a hardcore bowhunter or just a big fan of Jim Shockey, you owe it to yourself to add this bow to your arsenal. NO GUFF truly describes Jim Shockey and the equipment he chooses. Team Alpine is proud to be part of Team Shockey.

4 5

6 Licensed under Patent #6,990,970B-1

Alpine Ball Bearing Technology...Patent #6,415,780

Alpine Silverado Match Grade...

Alpine Silverado Series Ventura...

Silverado Series Ventura…Adding to its legacy…

In 2009, the Alpine Ventura quickly made its way to the front of the class as the most popular bow in the Alpine lineup. Back by popular demand for 2010, the Ventura has a few more hunting stories under its belt. Built on a solid one piece riser, the Ventura was created for those wanting a longer axle to axle bow. At 36 ½ inches and a very generous 7 3/8 inch brace height, the Alpine Ventura touts a boastful 324 fps IBO speed rating.

Add the industry leading VX limb pocket design and the stored kinetic energy in Alpine’s new 3G Velocitec Cam System and it’s easy to see why the Alpine Ventura is the leader of the pack.

Alpine Silverado…Withstanding the test of time…

Remember Grandpa’s old pickup that would start when none of the others would? Remember that old hunting dog that always seemed to run the right track? They were reliable no matter what. Well the Alpine Silverado is no different. Thanks to the time tested multi-part riser, the Silverado has become the most stable and cost effective bow on the market today. With a complete vibration dampening package this bow is extremely quiet as well as an absolute dream to shoot.

The Alpine Silverado is available in a standard version or with the ever popular Alpine Match Grade accessory option. The Match Grade option includes an integrated Montana Black Gold Flashpoint Sight, an Alpine Whisperflite Fall Away Arrow Rest, and an Alpine MR2 Stabilizer in matching camo. Visit your local Alpine Dealer today and see for yourself why the Alpine Silverado is the most reliable, best performing hunting bow on the market today.

Dave Fowler from Lenore, Idaho with a fine caribou he killed in Alaska this summer. Dave used a Silverado Series Ventura to get the job done.

Dustin Bomley, Alpine Production Manager, with a fine Old Mexico Whitetail taken with his Silverado Match Grade. Dustin hunted with Jim Shockey at Bomex Outfitters. Jim also arrowed a fine buck on that trip.

6 7

8

Alpine Assault...

The new “LXP Pocket System”... 2010 marks a year that Alpine Archery is doing the same thing that we always do… At Alpine Archery, we believe in making products that are functional and at the same time, different. We do not settle for status quos. Every year we have a new item, different idea, and create something better. This ideology will not change. We continue to press forward and think of cool things that work for today’s technically advanced and average joe bowhunters. With all of the innovations to date, we are still pressing on to create products that function to their maximum performance while being trouble free and affordable. We are forward thinkers, carving out a path in the archery industry and leaving our mark to never be overlooked. Alpine Archery is and will continue to bring you products that are ahead of their time. Alpine is proud to introduce our “LXP” design. The Laterally eXreme Pocket design is new for 2010 and available on a broad array of bow models. If your passion is speed, accuracy, stability, or you are draw length challenged, there is an Alpine Bow that is fitted with the “LXP” just for you. The new “LXP” design is an extended pocket system that will produce the speed of an extreme reflex bow, with the stability of a straight handle design, and some modest cost savings to you. Don’t get caught up trying to “Catch up if you can”. Join the innovative crowd and be a forward thinker! Shoot an Alpine bow with “LXP” and leave the others in the dust.

New for 2010, the Alpine Assault carries features like the LXP Pocket System, a radical reflex riser, and the New 3G Velocitec Cam! These features culminate to form the most racy looking and shootable speed bow on the market to date.

The Alpine Assault has a black wrinkle powder coated riser for many durable hours of shooting and hunting. The sleek riser is accented by new Skulz camo limbs, and rich Alpine brown anodized hardware.

Sporting a 3G Velocitec Cam, the Alpine Assault boasts a moderate brace height and lengthened axle to axle to provide a powerful yet smooth shooting machine. With features such as these, the blazing speeds that are associated with reflex style bow designs are made possible. At Alpine, we believe speed should also be accurate. With the Assault you get the best of all worlds.

The 3 & 5 arrow Soft Loc Quivers are available in the Skulz camo this year, to compliment the Assault.

Assault bow shown in the new Skulz camo.8 9

10

Alpine Eclipse G2...Short draw at its best...

Alpine Nitrous N20...

Based on the success of the Eclipse and Sienna bow models over the past couple years, Alpine has gone the extra mile to improve even more on what was already two great shooting machines!

For 2010, we have created several new features on these two bow models. First, we have updated the Mini Velocitec Cam to the new 3G technology, then shifted our focus to the limb pockets. We employed the new LXP Pocket System to dramatically increase the performance of these already racy little bows. While adding the LXP system, we also addressed riser designs. By using the neutral riser and shortening the limbs, we were able to increase the brace height and still increase speed at the same time. This ultimately created a bow that generates higher velocities while still providing a smooth and forgiving shooting experience.

What was already great just got better! The shorter draw, smaller framed archer can go afield or on the course with more confidence than ever before!

The New 2010 Alpine Nitrous N2O employs a neutral riser design to provide accurate and forgiving shooting, shot after shot. The power train of this speedster is driven by the new 3G Velocitec Cam. Combine the two and you have the ultimate in agility and horsepower all packed into one awesome package. This system is then topped off with the new LXP pocket which assures it will be touted as the smoothest, most accurate hunting bow in the Alpine lineup for 2010.

Finished in G1 Vista camo, the stylish lines, overall look, and astounding shootability of the Alpine Nitrous N2O will keep you on the range and in the woods wanting to shoot more than ever before.

The Nitrous N20 will also be available in a custom full camo version of the new Skulz camo, at a minimal $25.00 up charge. Please allow 3 weeks for delivery.

Dusty Powers, with a huge Utah bull elk. Dusty is the son of 6 time world IBO winner, Dave Powers, who also shoots Alpine.

Eva Shockey is shooting the Silverado Eclipse. Eva will be seen shooting some critters on Jim Shockey’s Hunting Adventures this year.

10 11

12 Licensed under Patent #6,990,970B-1

Sienna G2 Target...

Available in Lollipop Pink and Vader Black with silver anodized hardware.

Silverado Series Ventura Target...

Ventura TargetUnbelievably accurate……..

Somewhere throughout history the archery industry decided a good target bow had to be over 40 inches long. Well... someone forgot to tell that to the Ventura Target! With many impressive wins on the IBO and ASA circuits along with incredible victories in the highly intense NFAA schedule, 2009 proved to be a great year for Alpine Archery and the Ventura. With a 36 ½ inch axle to axle bow, shooters from all over the country proved that this “X” shooting machine could compete side by side at local and national levels with any other bow model out there. Back for 2010, the Ventura target is sure to be a common sight along shooting lines across the country. Shooters sporting the new Blue and Gold “Team Alpine” colors will be taking advantage of the forgiving 7 3/8 inch brace height and impressive 324 fps IBO speed rating. If you have not yet tried this thing of beauty, you owe it to yourself to get to your local dealer and demand to see what the Ventura can do for you.

Never settle for 2nd place... Based on the success of the Eclipse and Sienna bow

models over the past couple years, Alpine has gone the extra mile to improve even more on what was already two great shooting machines!

For 2010, we have created several new features on these two bow models. First, we have updated the Mini Velocitec Cam to the new 3G technology, then shifted our focus to the limb pockets. We employed the new LXP Pocket System to dramatically increase the performance of these already racy little bows. While adding the LXP system, we also addressed riser designs. By using the neutral riser and shortening the limbs, we were able to increase the brace height and still increase speed at the same time. This ultimately created a bow that generates higher velocities while still providing a smooth and forgiving shooting experience.

What was already great just got better! The shorter draw, smaller framed archer can go afield or on the course with more confidence than ever before! Available in Candy Apple Red

and Vader Black with silver anodized hardware.

Introduced in 2003, the Alpine VX Pocket System has proven to be the most secure way to hold split limbs to a bow riser. Since the inception of this design, few have achieved the extreme control that this pocket system displays. By clamping the pockets together like a vise, the limb is held so tightly that it exhibits no movement during the draw cycle or shot sequence. This extreme control allows for outstanding accuracy and noise control that, to date, has yet to be matched by any other manufacturer.

VX Pocket System… Proven positive year after year...

Alpine Ball Bearing Technology...Patent #6,415,780

12 13

14

Machined 6061 aluminum cams with 8 inches of rotating draw adjustment. Just remove a screw and rotate the draw module to the desired draw length.

Stalker II Cam with 8 inches of draw adjustment...

The Alpine Frontier was first introduced in 2006 and remains a very popular bow in the Alpine line up. It is known for its high quality craftsmanship, awesome performance, and a very affordable price tag. This lightweight and reliable machined handle bow is fitted with machined aluminum components. There are no cut rate plastic cams or pockets to be found on this little performer. The Frontier sports an Alpine Advantage One Cam that features an adjustable draw length and is finished in Next G-1 camo with accented brown anodized hardware. The price point, sharp look, comfortable feel, and precision craftsmanship have made the Alpine Frontier a desirable hunting partner. Each Alpine Frontier is set up at the factory with Alpine’s own dampening accessories, making the Alpine Frontier as silent as a sniper.

The Alpine Micro will not only meet, but will exceed the expectations of quality and performance that have been mounted on this gem of a bow. With rich, brown anodized components, a classy riser design and impeccable film dip finish, the Alpine Micro boasts nothing less than quality. Compared to the competition, there are no plastic components found here. Alpine Archery takes no short cuts. Both the limb pockets and cams are machined from 6061 aluminum. The Micro features a full 8 inches of draw length adjustment and peak weights that range from 40 to 50 pounds. Quality and performance on this little bow are paramount even for the young, at an amazing 280 fps IBO. Try the Alpine Micro and you will be amazed at the scores that will be posted and the trophies that will be taken. If your concern is quality and performance, this little jewel is the perfect fit.

The Micro Elite Package Bow comes standard with a value packed accessory package. This package includes Alpine’s own Fall Away Arrow Rest, Alpine 3 Arrow Bear Claw Quiver, and a Cobra Fiber Optic Sight. The Micro is also available in a bow only option without the accessory package.

The best performance for your dollar...

The perfect performance bow for the ladies and young adults...

* Match Grade dual ball bearing Fall Away Arrow Rest * 5 Arrow Soft Loc Quiver * Pro Flex Stabilizer * Montana Black Gold Fiber Optic Sight * Wood Panel Grip

Package items include...

Micro Elite...

Frontier Bow Package...

14 15

16

BOW MODEL IBO Rating

Draw Length

Draw Weight

Brace Height

BowOverall Length

Bow Axle to

Axle

Bow Mass

WeightColor/ Pattern

Cam Style

Cam Bearing

Limb Style & Length

Grip Material

String Length

Buss Length

String Material

Match Grade Option

Package Option Let-off

SILVERADO YUKON shipped with 29”/30” mods

324 fps @ 30”

29-32” modules 60, 70# 7.375” 41” 36.5” 4.3# Black &

CamoVelocitec Hybrid

* Precision ball bearing

13 inch Parallel

Rosewood 1 piece 59” 33.875”

+ yoke 8125 80%

SILVERADO & MATCH GRADE shipped with 28”/29” mods

328 fps @ 30”

27-30” modules 60, 70# 7.25” 35.75” 31” 4.2# Mossy Oak

TreestandVelocitec Hybrid

* Precision ball bearing

13 inch Parallel

Rosewood 1 piece 54.125 28.5”

+ yoke 8125 • 80%

SILVERADO VENTURA shipped with 29”/30” mods

324 fps @ 30”

29-32” modules 60, 70# 7.375” 41” 36.5” 4.3# Next G-1

VistaVelocitec Hybrid

* Precision ball bearing

13 inch Parallel

Rosewood 1 piece 59” 33.875”

+ yoke 8125 80%

YUKON & VENTURA MINI VELOCITEC CAM shipped with 27”/28” mods

310 fps @ 29”

26-29” modules 60, 70# 7.25” 39.5” 36” 4.3# Next G-1

VistaMini

Velocitec Hybrid

* Precision ball bearing

13 inch Parallel

Rosewood 1 piece 55” 32.875”

+ yoke 8125 75%

SILVERADO ECLIPSE G2 MINI VELOCITEC CAM shipped with 25”/26” mods

298 fps@ 27”

24-27” modules 50,60# 7.25” 36.25” 32” 3.9# Next G-1

VistaMini

Velocitec Hybrid

* Precision ball bearing

12 inch Parallel

Rosewood 1 piece 51.375” 29.5”

+ yoke 8125 75%

SILVERADO VENTURA TARGET MINI VELOCITEC CAM shipped with 27”/28” mods

310 fps @ 29”

26-29” modules 60, 70# 7.375” 39.5” 36” 4.3#

Vader Black /Silver

Candy Apple Red/Silver

Mini Velocitec Hybrid

* Precision ball bearing

13 inch Parallel

Rosewood 1 piece 55” 32.875”

+ yoke 8125 75%

SILVERADO VENTURA TARGET shipped with 29”/30” mods

324 fps @ 30”

29-32” modules 60, 70# 7.375” 41” 36.5” 4.3#

Vader Black /Silver

Candy Apple Red/Silver

Velocitec Hybrid

* Precision ball bearing

13 inch Parallel

Rosewood 1 piece 59” 33.875”

+ yoke 8125 80%

SILVERADO SIENNA G2 MINI VELOCITEC CAM shipped with 25”/26” mods

298 fps@ 27”

24-27” modules 40, 50# 7.25” 36.25” 32” 3.9# Pink/Silver

Black/SilverMini

Velocitec Hybrid

* Precision ball bearing

12 inch Parallel

Rosewood 1 piece 51.375” 29.5”

+ yoke 8125 75%

SILVERADO ASSAULT shipped with 28”/29” mods

328 fps @ 30”

27-30” modules 60, 70# 6.125” 38.5” 34” 4.2# Black/

Skulz camoVelocitec Hybrid * Precision

ball earing13 inch Parallel

Rosewood 1 piece 57” 31.75”

+ yoke 8125 80%

SILVERADO NITROUS N2O shipped with 29”/30” mods

320 fps @ 30”

28-31” modules 60, 70# 7.25” 37.75” 33.25” 4.2# Next G-1

VistaVelocitec Hybrid * Precision

ballbearing12 inch Parallel

Rosewood 1 piece 56.5” 30.875”

+ yoke 8125 Full Skulz camo 80%

FRONTIER BOW PACKAGE 300 fps 26-30”

rotating 60, 70# 7.25” 39” 35” 3.5# Next G-1 One cam

Bronze bearing

14.5 inch Power Tuff

wood 2 piece 93” 38.5” Fast

Flight • 80%

MICRO 280 fps@ 28”

21-28” rotating 40, 50# 6.00” 35” 32” 3.0# Next G-1 Stalker

IIBronze bearing

13 inch Power Tuff

ABS 2 piece 50” 33.5” Fast

Flight 65%

MICRO ELITE PACKAGE 280 fps@ 28”

21-28” rotating 40, 50# 6.00” 35” 32” 3.0# Next G-1 Stalker

IIBronze bearing

13 inch Power Tuff

ABS 2 piece 50” 33.5” Fast

Flight • 65%

Designed and built in America* Alpine Bearing Patent # 6,415,780

Note: Bow overall lengths and axle to axle lengths are approximate due to soft harness systems.

16 17

18 Patent #6,672,299

Since the introduction of the Soft Loc Quiver System back in 2001, it has only gained in popularity. The Soft Loc quickly became known as the quietest, mid-priced quiver available. When mounted on a bow, this quiver actually reduces felt vibrations, therefore acting as a great and very practical vibration dampener. The many awards for quality and innovation have posted this system to be quoted as “The best quiver system on the market”! The beauty of the “system” is the extreme versatility of the quiver itself due to the unique rubber mount and dual guide rails. Attach or detach the quiver quickly and quietly. Vertical adjustment, vibration dampening, hip holsters, and compact mounts are all features that a great quiver must have. All are present in the Soft Loc family.If you are looking for a quiver that is unequalled in quality, innovation, dampening, and price, look no further than Alpine Archery.

* Mossy Oak New Break-Up* Realtree Hardwoods Green HD* Realtree Hardwoods HD * Realtree APG HD* Next G-1* Mathews Lost Camo * Advantage Max-4 (3 & 5 arrow only)* Mossy Oak Treestand (3 & 5 arrow only) * Skulz Camo (3 & 5 arrow only) * Next G1 Vista (3 & 5 arrow only)* Black (5 arrow only)

Available in 3, 5, and 7 arrow versions...

Alpine has re-designed the mounting assembly for the Soft Loc Quivers. The new mount will hold the quiver more securely in place and is slightly longer to help stabilize the mounting platform.

New, Soft Loc Mounting Assembly...

Soft Loc Special Edition Quivers... Alpine has raised the bar with some new entries into the Soft Loc line. These Special Edition Quivers feature a full camo option for a custom, tricked out look on your bow setup! We have built these beauties in Lost Camo for the folks with Mathews bows and in the new Realtree APG HD for the wide array of bows currently availability in that pattern. The APG HD is a very universal green camo that will match many other camo patterns available in today’s market.

Soft Loc Special Edition in Realtree APG HD.

Soft Loc Special Edition in Mathews Lost Camo.

The Special Edition Soft Loc is only available in the 5 arrow version.

Soft Loc Quivers are available in these popular camo patterns..

Soft Loc Quivers

Jay Gregory, host of The WIld Outdoors, with a fine Wyoming lope. Jay has used our Soft Loc Quivers for years.

New Skulz camo on the Soft Loc 5 Arrow. Works great on all black bows. It matches the limbs on our New Silverado Assault bow.

18 19

20

Compact Screw-in Quiver Mount...

Compact Treestand Quiver Mount...

The Compact Screw-in Quiver Mount was first introduced a few years back and has quickly become a must have accessory if you remove your quiver from your bow while in the treestand. Secure your Soft Loc Quiver to any tree with a flip of the wrist and a simple twist. This unique Quiver Clip is a great way, pioneered by Alpine Archery, to securely attach your Soft Loc Quiver to the tree.

The screw-in version of the quiver mount has a very sharp lag screw that tucks neatly into the body of the mount for transportation and storage. This compact feature allows you to pack the quiver mount in your pocket or any pouch of your hunting pack without injury or damage.

Just zip tie the mount to your stand and go... This setup is perfect for all treestands.

If you prefer to attach your quiver to your stand, the Compact Treestand Mount has the same great receiver as the screw-in version and can be attached to the side rail of any treestand with provided zip tie straps. This too can be carried in a pocket or pouch easily. Alpine also has designed this mount so it can be attached to any hard surface such as a cargo box on a 4 wheeler or a hard bow case.

“Quick Draw” Hip Quiver System, switch from your bow to your hip in seconds ...Soft Loc Replacement

Foam...

Soft Loc Mounting Assembly...

Alpine’s Quick Draw Hip Quiver System features a rugged full grain leather holster with a rotating mount and a quick detach rail gripper. This is a very unique hip quiver designed with the flexibility to adapt to brushy or open conditions in seconds. Simply purchase the Soft Loc of your choice (3, 5, or 7 arrow) and mount it to your bow. Then once you purchase the hip quiver, you are set and ready to go with a mount on your bow and on your hip. This allows you to switch back and forth from the bow to your hip in seconds.

Always hunt safe! When your foam gets worn out, it should be replaced. The Soft Loc Replacement Foam is not your ordinary foam. It is cut from top quality ethafoam and will hold up much longer than generic type quiver foam. New foam insures your

broadheads and arrows will be held safely in place.

Available for 3, 5, and 7 arrow versions.

When purchased separately, this item is very popular for mounting to a hard bow case, or hard surface such as an ATV or UTV.

Vertical Quiver Mounting Bracket...

The Tension Pin Set for the Alpine arrow gripper is the answer for holding smaller diameter arrows being produced in today’s market. Each pin is molded in an oval shape and designed to increase arrow tension on the Alpine Soft Loc and Bear Claw Quivers. Simply slip a pin into the outbound hole in the lower gripper. Twist slightly, to increase or decrease tension. 7 pins included.

Tension Pin Set...

Used when shooting shorter bows, this bracket will mount your quiver 2.5” higher to avoid having your nocks contact the ground while resting the bow on the lower cam.

Soft Loc Accessories

20 21

22

Bear Claw Quiver, the ideal treestand quiver, in all of the hot camo patterns...

Alpine’s Bear Claw QuiverWhen you want the best on a budget...

Works great with mechanical broadheads!

Cousin to the Soft Loc… The Alpine Bear Claw Quiver is a great, cost effective way to carry your arrows. The Bear Claw 3 and 5 arrow versions are designed to have more refined features than any other price point quiver available.

The Bear Claw Quiver is a universal quiver system designed with the treestand hunter in mind. With the Bear Claw you have a lightweight, inexpensive quiver that easily detaches and will accept any common arrow size. The Bear Claw has a wide range of vertical adjustment, so you can move the quiver to avoid rest or sight conflicts and keep your nocks out of the mud. Conventional broadheads are no problem and the convenient pre-cut holes in the quiver foam allow you to use mechanical broadheads without the extra weight and expense of an additional arrow gripper.

The latch makes the difference...

Bear ClawMounting Assembly...

Always hunt safe! When your foam gets worn out, you should replace it. The

Bear Claw Replacement Foam is cut from top quality ethafoam and will hold your arrows safely until you are ready for that next shot.

Available for 3 and 5 arrow versions.

The latch on the Bear Claw is fast and easy to use. This positive locking latch will allow you to vertically adjust or remove the quiver to suit your needs. Just rotate the lever 90 degrees to lock. Lever is shown in the open position in the photo above.

This is a very popular item. It is normally mounted to hard bow cases and/or on ATVs for extra storage.

Secure your Bear Claw Quiver to any tree with a flip of the wrist and a simple twist. This Quiver Clip is a unique way, pioneered by Alpine Archery, to securely attach your Bear Claw Quiver to the tree.

The screw-in version of the quiver mount has a very sharp lag screw that tucks neatly into the body of the mount for transportation and storage.

Also available in Compact Treestand Mount. This mount attaches with wire ties for a more permanent mounting solution.

Bear Claw Compact Screw-in Mount...

* Mossy Oak New Break-Up* Realtree Hardwoods Green HD* Realtree Hardwoods HD * Realtree APG HD* Next G-1* Mathews Lost Camo * Advantage Max-4* Mossy Oak Treestand * Skulz Camo * Next G1 Vista* Black (5 arrow only)

22 23

24

Easy vertical adjustment...

Alpine’s launcher acts as a built in arrow holder...

Your choice, cable slide or buss pull...

Vertical adjustment is independent from the horizontal adjustment, making it easier to hold the desired settings needed. The stop lever protruding from the bottom of the radial pull lever rests against a socket head screw mounted in a slot for easy adjustment.

The launcher on the Whisperflite Rest is designed to cradle the arrow while in the lowered position. Two self adhesive fleece pads are provided to reduce noise as you draw and fire the bow.

Just thread your rope into different holes in the radial pull lever to change the direction of pull.

Affordable, innovative, rugged, and easy to set up...

WhisperFlite Rests

When the engineers at Alpine Archery sit down and brain storm… Look out!!!Alpine is always trying to design a better way to do things… In 2006, Alpine introduced

the Whisperflite Fall Away Arrow Rests and today the legacy continues to grow. Independent testing on over 15 different fall away rests awarded Alpine the #1 best pick in the “Best Bang For The Buck” category in a recent head to head comparison. This innovative rest is a “no bones about it” product… Alpine has achieved this by taking into account every possible feature… Built in arrow holder on the launcher, independent windage and vertical adjustment, universal mounting holes, buss cable or cable slide pull option, sealed ball bearings, brown anodize, a silver anodized target color, and the list goes on…

When you stop and look at all of the features, this rest is a “must want”… When you look at the price, the Whisperflite Fall Away Arrow Rest becomes a “must have”!!!!

Whisperflite Match GradeBall Bearing Fall Away...

Match Grade quality, with instrument grade ball bearings...

Windage adjustment is a snap with the innovative launcher mounted on a unique stainless steel, hex launcher bar. Just loosen the three socket head screws and slide to your desired setting.

Alpine’s Match Grade Whisperflite Rest is built using dual ball bearings with one bearing mounted into each side of the mounting bracket to assure absolute accuracy shot after shot for years of trouble free shooting.

This solid model, exploded view shows the bearing assembly as it fits into the rest body.

Match Grade in Brown

Match Grade in Target Silver

2524

26

MR Series Stabilizers, lightweight, compact, and economical...

Adjustable, “Six Shooter Weight System” ...

The Alpine Flex Coupler features licensed Doinker technology. This coupler is the heart of our unique stabilizer system. Alpine’s design is sure to make the MR Series Stabilizers a practical, tactical, “must have” for every bowhunter.

The Alpine Archery stabilizer line is designed with every feature being a practical standard. The Pro Flex Stabilizer dissipates more recoil than any other stabilizer in the industry today. The rubber body and ribbing are designed specifically to tame any of today’s most radical bows.

The MR Series Stabilizer’s function is recoil reduction and counterbalance. The “Six Shooter” head weight is designed to give you the ability to change the weight up to 2 oz. by adding or subtracting the 158 grain .357 slugs

that are provided with the stabilizer. Using the Flex Coupler (licensed Doinker Technology), the MR stabilizers reduce recoil and keep vibrations to a minimum. The MR stabilizers are fitted with the Alpine exclusive

Tactical Rubber Bra. This feature works as a dampener as well as protects the stabilizer from making noise when bumped against a treestand or brush.

If noise and recoil are an issue, Alpine Archery Stabilizers are the answer.

6 inch Pro Flex Stabilizer... New, Alpine Super Duster Wind Detection System...

The Pro Flex Stabilizers have been in the Alpine line for several years now and still continue to gain popularity. They have proven themselves time and time again to be one of the most effective stabilizers for reducing recoil and vibrations. The Pro Flex is an economical stabilizer with a flexible, hollow rubber body that is very effective. It is available in black with a mass weight of 7 ounces. If you want an awesome stabilizer that really works, look no further.

• Adjustable “Six Shooter Weight System”• Mass weight is 7 to 9 oz. • Length is 5.5 inches• Colors available:• Mossy Oak New Break-Up• Realtree Hardwoods Green HD• Realtree Hardwoods HD • Realtree APG HD• Next G-1• Mathews Lost Camo

MR2 Stabilizer

Alpine’s new wind tester is designed to eliminate fumbling for, or even loosing your wind tester while stalking game and checking wind direction. By hooking it to your belt or pack, you always know where it is, plus it allows you to keep hand movement to a minimum and remain undetected by your quarry. It is assembled using a shock cord to give you additional reach away from your body to pick up subtle wind movements. Since the bottle hangs with the nozzle in the down position, your powder is always charged in the tip, and ready for action.

26 27

28

Many companies claim to come up with “SLICK” ideas…Alpine Archery has taken it literally, brainstormed, and created yet another revolutionary accessory, the Alpine

Mach 5 Cable Slide. Since the cable slide is a necessary part of your setup, we have taken every feature into account and come up

with the slipperiest, quietest, fastest cable slide available. The Mach 5 Cable Slide features a Teflon slide surface, press fit into a rubber, vibration dampening sleeve, and capped off with a space age looking slide body that is fitted with a termination point for a fall away rest pull cord if desired.

Cousin to the ever successful Alpine Glide Slide, this little gem is a sure fit on any bow utilizing a 3/8” diameter cable guard. It is available in pink, blue, red, brown, or a high definition camouflage film finish. Don’t let your shot of a lifetime vanish before your eyes because of an inferior, squeaky, or slow cable slide.

This exploded view drawing shows the Mach 5 components as they are assembled into the slide.

Rope pull hole for fall away rests.

Streamlined composite body.

Rubber dampening sleeve isolates & reduces vibrations.

The Teflon liner and rubber sleeve have a locator hole to keep them mated and aligned with the alignment post in the composite body.

Alpine Archery has created this cable slide by combining Teflon and rubber into a high-tech composite housing, making the Mach 5 the best cable slide available. Based on technology from the proven Alpine Glide Slide that was in the line for years, this slide is the ultimate in combining craftsmanship and function.

The large Alpine Archery soft bow case is custom built for all Silverado Series bows with a maximum capacity of 42 inches overall length. Fitted with straps to securely attach to your ATV, plus a generous arrow case pocket and 3 small accessory pockets for all wrenches, tools, or release aids.

Available in Realtree Max-1.

Large Bow Case...

Small Bow Case... The small Alpine soft bow case is specifically designed for the Alpine Micro.

First introduced in 2008 to fit all Silverado Series Bows, this low wrist, rosewood grip has become very popular for archers who desire the low wrist feel. Must be purchased separately.

28 29

30

Alpine long sleeve tee with front Alpine logo & “Fear The Force” down left sleeve. Short sleeve tees with front Alpine logo.

This hooded sweatshirt is an 80/20 cotton/poly blend fleece. Double layer hood, drawstrings, and kangaroo pocket. Middle chest Alpine logo & “Fear the Force” down left sleeve. Dark Heather Grey. Mens Sizes: SM, MD, LG, XL, and XXL. Retail $39.95+

These tee shirts are heavyweight 100% cotton. Long sleeve available in Prairie Dust. Short sleeve available in Olive Green and Steel Blue.Mens Sizes: SM, MD, LG, XL, and XXL. Retail $9.95+

For the ladies!!! This HOT black ribbed boyfriend tank is 100% cotton, has a longer length, and is form fitting. Comes with Pink & White Alpine logo on the chest and “Fear the Force” across the lower back. Black. Junior Sizes: SM, MD, LG, XL, XXL. Retail $13.95+

Alpine hats with embroidered logo. Available in Camo, Black, Sage, Brown, and Pink Camo. One size fits all. Retail $7.95+

These short sleeved polos have the front embroidered Alpine logo and are stone washed in Taupe and Coal. Mens Sizes: SM, MD, LG, XL, and XXL. Retail $24.95+

Team Alpine Clothing

Alpine Bow Rack...The Alpine bow rack is custom built from Idaho red cedar. Deep relief cut with elk and timber background. Finished with a urethane clearcoat for a long lasting finish.

Alpine Pro Staff Shooter Shirt...NEW!! Be a part of Team Alpine!!! Short sleeve 100% SoftCool moisture wicking fabric.Blue & Gold. Alpine logo and “Staff Shooter” on left chest. Fullsize logo on back. Mens Sizes: SM, MD, LG, XL, XXL, and 3XL. Retail $32.95+

30 31

32

www.alpinearchery.com Business hours: Monday through Friday 8 am to 4:30 PM (Pacific Time)Catalog requests and e-mail address: info@alpinearchery.comAlpine Archery is licensed under one or more of the following U.S. patents. #4,241,715 #5,368,006 #5,809,982 #4,748,962 #5,020,507 #6,990,970

Alpine ArcheryPO Box 3193101 North South HighwayLewiston, ID 83501208-746-4717

1988 1st Slide Lock Overdraw. This was the first adjustable length overdraw, with a movable carriage. 1989 1st Ultra Overdraw. First overdraw reversible for right and left hand. 1990 1st Alpine introduces machined riser bows. The Silverado Target Bow began the machined riser revolution. Within the next few years every manufacturer would follow Alpine’s lead.1990 1st Machined riser bows with removable limb pockets and shelves.1991 1st To integrate an overdraw system into the Silverado machined riser bow.1991 1st To build a reflexed machined riser bow.1992 1st Alpine introduces the Alpine Colt youth bow. This bow was the first compound bow scaled down to fit a child properly.1994 1st To CNC machine limbs for the closest possible dimensional control.1995 1st Alpine built the first rotating draw length cam. This cam was used on the Colt youth bow.1995 1st Alpine also introduced the Ladies Silverado bow. This little wonder was the first bow built exclusively for women.1997 1st Alpine introduced the Inverse Twin Limb Mounting System. This revolutionary system held twin limbs more securely and quietly than any other limb mounting system offered.1997 1st The T-2 cam had two different performance profiles, so one could change the feel and performance of the bow.1997 1st To bed limbs in silicone to reduce noise and vibration.2000 1st Alpine introduced the patented Fast Trac Ball Bearing Cam technology. This innovative system eliminated bearing wear associated with bronze and nylon bearings. Today most manufacturers are following Alpine’s lead. Patent #6,415,7802001 1st To introduce wide platform limb technology for more stability and torsion control.2001 1st To introduce wide body cam technology with 25% wider grooves to reduce buss and string serving wear.2001 1st The Soft Loc Quiver is the first quiver to provide a dual guide rail, friction locking quiver mount with full vertical adjustment, and a quick dismount with no mechanical fasteners or hardware. Patent #6,672,2992001 1st Quiver system with interchangeable hoods to adapt to different camo patterns. (Soft Loc Quiver)2003 1st To introduce the VX Series Pocket Mounting System. This system clamps the limbs to the riser like a vice. Still the most solid limb mounting system in the industry today.2005 1st To build integrated multi part, modular machined risers with the Tundra Series Denali. This innovative concept reduced material waste and cost and assured precise alignment of the upper and lower limbs. Today, several manufacturers continue to follow Alpine’s lead. 2007 1st To introduce a hybrid cam system featuring dual payout grooves for load balancing. The Velocitec Cam System also combines different string profiles to balance power and speed with a smooth draw cycle.

Alpine innovations since 1988...