3rd Generation Vehicle Drive Recorder 2018 · Thank you for purchasing this advanced drive recorder. This product is specifically designed for real time video recording when driving

DVR-4HD

3rd Generation Vehicle Drive Recorder 2018

DVR-5HD

User manual

1

Contents About this Guide ........................................................................ 4 WEEE Notice ............................................................................. 4 CE Regulatory Notice ................................................................ 5 Battery Warning ......................................................................... 5 Notes on Installation .................................................................. 6 Caution…................................................................................... 7

1 Introduction ............................................................... 8 1.1 Features ..................................................................... 8 1.2 Package Contents....................................................... 8 1.3 Product Overview........................................................ 9 1.4 Product Overview – Rear camera (DVR-5HD only) ..... 10

2 Getting Started .......................................................... 11 2.1 Storage Media ............................................................ 11

2.1.1 Inserting the Memory Card .......................................... 11

2.1.2 Removing the Memory Card ....................................... 11 2.2 Installation in Vehicles ................................................. 12

2.2.1 Mount to Windshield ................................................... 12

2.2.2 Adjusting the device position ....................................... 13 2.3 Connecting to the Power Supply ................................. 14 2.4 Installation in Vehicles – Rear Camera (DVR-5HD only) .......... 14

2.4.1 Mounting Rear Camera to the Windshield ................... 14

2.4.2 Adjusting Rear Camera (DVR-5HD only) .................... 17

2.4.2.1 Recording Rear View .................................................. 17

2.4.2.2 Recording Inside the Vehicle ....................................... 18 2.5 Connect and Set Up Rear Camera (DVR-5HD only) ... 19

2.5.1 Battery Status Indicator ............................................... 20 2.6 LED Indicator .............................................................. 20 2.7 Powering the Device On / Off and Resetting ............... 21

2.7.1 Auto Power On/Off ...................................................... 21

2.7.2 Manual Power On/Off.................................................. 21

2.7.3 Reset .......................................................................... 21 2.8 Initial Settings ............................................................. 22

2.8.1 Set the Time Zone....................................................... 22

2.8.2 Set the Date / Time ..................................................... 24

DVR-4HD & DVR-5HD Gen3 EN V1.0 07/18

2

3 Using the Drive Recorder ......................................... 25 3.1 Automatic Recording ................................................... 25

3.1.1 The Front Camera’s Recording Screen ....................... 26

3.1.2 Emergency Recording ................................................ 28 3.2 Add Speed Point ......................................................... 29 3.3 Picture in Video ........................................................... 29 3.4 Driving Safety ............................................................. 30

3.4.1 Speed Cam Alert ......................................................... 30

3.4.2 Speed Limit Alert ......................................................... 31 3.5 Parking Mode .............................................................. 32 3.6 Collision Detection ...................................................... 34 3.7 Driver Fatigue Alert ..................................................... 35 3.8 LDWS ......................................................................... 35 3.9 FCWS ......................................................................... 37 3.10 2 Grid Function Chart .................................................. 38 3.11 Playback Videos and Photos ....................................... 39

3.11.1 Playback ..................................................................... 39

3.11.2 Playback Mode ........................................................... 40 3.12 Deleting Files .............................................................. 41

4 Initial set up Drive HD application ........................... 44 4.1 Camcorder application installation .......................... 44 4.2 Wi-Fi connecting ....................................................... 45

5 Using the Drive HD application ................................ 46 5.1 Camera and Wi-Fi Setting ........................................... 47

5.1.1 Wi-Fi Setting ............................................................... 47

5.1.2 Camera Setting ........................................................... 48 5.2 Camera preview, record, snapshot .............................. 49 5.3 Playback, delete, download ........................................ 50 5.4 Local album ................................................................ 52

6 Adjusting the Settings .............................................. 53 6.1 Using the Menu ........................................................... 53

7 Connecting to Other Devices ................................... 57 7.1 Connecting to the Computer ....................................... 57 7.2 Connecting to TV ........................................................ 58

8 Installing the Software .............................................. 59


3

9 Updating speed trap data ......................................... 60

10 Snooper DVR Player ................................................. 61

11 Specifications ........................................................... 62

12 Service Under Warranty ............................................ 64


About this Guide The content in this document is for information purpose and is subject to change without prior notice. We have made every effort to ensure that this User Guide is accurate and complete. However, no liability is assumed for any errors or omissions that may have occurred. The manufacturer reserves the right to change the technical specifications without prior notice.

IMPORTANT NOTICE:The only regular maintenance required on a Dash Cam is formatting the Micro SD Card. Most problems encountered with Dash Cams are SD card related and not the Dash Cam itself.

For optimal performance of your Dash Cam and the SD card, it is recommended to format your SD Card monthly. It is also important to format your Micro SD card at first use via the camera menu.Due to the fragmented nature of the files produced, from constantly starting and stopping recordings, these partial files will clog up the SD card and may negative impact on recordings quality and the lifespan of the SD card.

It is the responsibility of the user to regularly review footage to check that videos and data is recording correctly.

The Snooper driveHD app is available from both the Apple and Android app stores.

3

5

This symbol on the product or on the packaging indicates that this cannot be disposed of as a household waste. You must dispose of your waste equipment and/or battery by handing it over to the applicable take-back scheme for the recycling of electrical and electronic equipment and/or battery. For more information about recycling of this equipment and/or battery, please contact your city office, the shop where you purchased the equipment or your household waste disposal service. The recycling of materials will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and environment.

CE Regulatory Notice

This product will meet the Basic Restriction limits of 1999/519/EC. The product herewith complies with the requirements of the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU, battery directive 2006/66/EC, the R&TTE Directive 1999/5/EC and the RoHS Directive 2011/65/EC.

Battery Warning

• Never dismantle, crush, or pierce the battery. Do not exposethe battery to a high temperature environment.

• Only replace the battery with a genuine Snooper battery.

• Keep the battery out of reach of children.

• Batteries may explode if exposed to fire. Never dispose ofbatteries in a fire.

• There are no user serviceable parts inside the DVR-5HD, thebattery can only be replaced by an authorised Snoopertechnician.

• Dispose of used batteries by observing local regulations.


6

Notes on Installation

1. Before installing the device, measure the front windshieldviewing area, make sure not to block the driver's front view,install the device below the rear view mirror (the central, higherright position of the front windshield). And we recommend thatthe sky and the land each occupy 50% of the screen, fix the carholder and then adjust the device so that the lane ahead isaligned with the screen. Proper installation enables the device tomaximize the efficiency and can also enhance the accuracy ofLDWS.

2. Make sure that the lens is within the wiping range of thewindscreen wiper to ensure a clear view when it rains.

3. Do not touch the lens with your fingers. Finger grease may beleft on the lens and will result in unclear videos or pictures.Clean the lens on a regular basis.

4. Do not install the device on a tinted window. Doing so maydamage the tint film.

5. Make sure that the installation position is not hindered by thetinting on a window.

6. This product is suitable for light windshield or light colourheat-resistant film windows, it will affect video quality if it isinstalled on dark tinted windows or windows with darkheat-resistant film.

7. Only use the supplied battery charger. Do not use any otherbranded battery charger, using any other charger may causedamage to your equipment or may cause the battery to explode.

8. The suction cup bracket is designed for temporary mounting andwill require periodic re-installation. The adhesive bracket isdesigned for one time and long term installation. Werecommend using the adhesive bracket if permanent installationis desired. We are NOT liable for any damages or data loss dueto improper bracket mounting or the suction cup bracket losingsuction and falling off.


7

Caution

• Due to local laws and vehicle safety considerations, do notoperate this device while driving.

• Set up time zone, time and date accurately before you use thisdevice.

• Please use Snooper Player software only if the Maps arefunctioning correctly.

• The firmware function in the device is for reference only, driversare advised to exercise discretion based on actual roadconditions.

• The results of GPS positioning are only for reference, andshould not be used to affect the actual driving situation. Thedevice cannot ensure total positioning accuracy.

• GPS positioning accuracy may differ depending on weatherconditions and the location, such as high buildings, tunnels,undergrounds, or forests. GPS satellite signals cannot passthrough solid materials (except glass). Tinted windows will alsoaffect the performance of the GPS satellite reception.

• GPS reception performance may differ on each device. Thedevice cannot determine the accuracy of positioning data fromdifferent devices.

• The values displayed in this device, such as speed andposition, may be inaccurate due to the influence of thesurrounding environment. They are for reference only.

• This product should only be used for non-commercial usewithin the limits permitted by the appropriate laws. We do nottake any responsibilities for the loss of use of the product.

• It is normal for this device to become warm during use.

• Improper use or operation of the product may result in damageto the product or its accessories and will void the warranty.

Before you start using the product, it is assumed that you agree to the above statement.


1 IntroductionThank you for purchasing this advanced drive recorder. This product is specifically designed for real time video recording when driving.

1.1 Features• SONY Sensor, low light enhancement• Full HD 1920* 1080• 3.0” TFT-LCD colour screen• 155° Wide angle lens• Collision Detection, when a collision is detected, the device will

automatically trigger the emergency recording function• Parking Mode (Motion detection, Vibration detection)• Multifunction traffic safety reminder• Rear Camera 1080p (DVR-5HD only)

1.2 Package ContentsThe package contains the following items. If there are any missing or damaged items, contact your dealer immediately.

Drive Recorder

Quick Start Guide

Bracket X2 Rear Camera

Car Adapter Micro SDRear CameraCable

Do NOT install the bracket in a location that may obstruct your field of view and impact driving safety.

7

1.3 Product Overview

No. Item

1 Menu / Back Button ( / )

2 Add Speed Point / Up Button ( / )

3 Snapshot / Down Button ( / )

4 Emergency Recording / Confirm But-ton ( / )

5 Switch Camera Button ( 2CH)

6 LED Indicator

7 LCD Colour Screen

8 Speaker

9 Wide Angle Lens

No. Item

10 Reset Hole

11 Microphone

12 Power Switch

13 Power Connector Port

14 Memory Card Slot

15 HDMI Connector Port

16 Rear Camera Connector Port (DVR-5HD ONLY)

17 Bracket Socket

Please press the button (1~5) according to the diagram notice shown on screen.

8

10

1.4 Product Overview – Rear camera (DVR-5HD only)

No. Item No. Item

1 Wide Angle Lens 4 Camera Rotation Shaft

2 Base 5 Rear/ front image switch

3 Micro USB Connector Port


11

2 Getting Started 2.1 Storage Media 2.1.1 Inserting the Memory Card Insert the memory card with the contacts facing towards the screen of the device, see the illustration below. Push the memory card in until you hear a click, indicating the card is in position.

2.1.2 Removing the Memory Card If the device is powered on, please power off first and wait for the device to completely power down before ejecting the memory card.

Note: 1. Do not remove or insert the memory card when the device is turned on. This may

damage the memory card. 2. Support SDHC class 10 and memory storage of 8GB or above (supports up to 32GB).3. Please format the micro SD cards before the initial use. The formatted file type for this

device is FAT32 file. 4. When removing the memory card, be careful that the card may spring out and become

lost. The memory slot has this spring-out feature for easy removal of the card.


12

2.2 Installation in Vehicles 2.2.1 Mount to Windshield


13

2.2.2 Adjusting the device position


14

2.3 Connecting to the Power Supply Only use the supplied car adapter to power this device and charge the built-in battery.

1. Connect one end of the car adapter to the power connectorport on the device. USB port input: DC 5V / 1.0A.

2. Plug the other end of the car adapter to the cigarette lightersocket of your vehicle. Once the vehicle engine starts thedevice will automatically power on. Car adapter input: DC 12 /24V.

Note: Please measure the front windshield viewing area. So as not to block the driver's field of view, install the device under the driving mirror (upper center of the front windshield). We recommend that the sky and the land each occupy 50% in the recording screen, please adjust the device so that the alignment icon is correctly aligned with the driving lane. Proper installation enables the device to operate with maximum efficiency and improve the accuracy of LDWS.

2.4 Installation in Vehicles – Rear Camera (DVR-5HD only) 2.4.1 Mounting Rear Camera to the Windshield


15

1. Remove the white paper from thedouble sided tape, stick it onto thebase of the rear camera, then firmlypress the double sided adhesive tapeto ensure its firmly stuck.

2. Adjust the rear camera as illustrated below: please check therecording direction is aligned correctly before installation.

Rear view recording In-car recording

3. Connect the USB cable with the primary camcorder and powerit on to enter the preview screen and confirm the field of view.Then clean the surface of the windshield with alcohol to ensurethat the adhesion surface is clean.

4. Remove the red paper on the double sided adhesive tape.

5. Install the rear camera onto the windshield, firmly press the padto ensure its firmly stuck.


16

Note: 1. Do not install the device on a tinted window. Doing so may damage the tint film.2. This product is suitable for light windshield or light colour heat-resistant film windows, it

will affect video quality if installed on dark windows or dark heat-resistant film windows.


17

2.4.2 Adjusting Rear Camera (DVR-5HD only) 2.4.2.1 Recording Rear View

1. Once the rear camera is mounted to the rear windshield, thelens should be rotated to accommodate the external rear viewas illustrated below.

2. Slide the switch to “Rear”.

3. Use the preview screen on the front camera to fine tune thedesired lens angle.


18

2.4.2.2 Recording Inside the Vehicle 1. Once the rear camera is mounted to the rear windshield, the

lens should be rotated to accommodate the internal cabin viewas shown by the illustrations below.

2. Slide the switch to “Front”.

3. Use the preview screen from the front camera to fine tune thedesired lens angle.

Note: We recommend users to disconnect the micro USB cable from rear camera before adjusting.


19

2.5 Connect and Set Up Rear Camera (DVR-5HD only) Use the USB cable from the rear camera package to connect between the front and rear cameras. (Rear camera is included in the DVR-5HD package only. Please contact distributor for further information.)

1. Plug phone jack into the front camera’s 2CH port. (Front camerashould be powered off.)

2. Plug the other end of the USB cable (micro USB connector) intothe rear camera’s USB port.

Note: 1. Install the rear camera in the upper central position of the rear windshield. 2. The rear camera doesn’t support hot Plug-n-Play. Please turn off the front camera

before plugging in the rear camera. 3. If you change to the other rear camera, after Menu setting, you will need to re-power on

the front camera.


2.5.1 Battery Status Indicator

2.6 LED Indicator

Icon Description

Full battery power.

2/3 battery power.

1/3 battery power.

Out of battery power.

Battery is charging.

Connected to the car adapter the battery is fully charged.

NOTE:1. To avoid equipment overheating and possible catastrophic damage to the battery, please only use the supplied car adapter. Do not use any other brand of car adapter, any damage caused by using any other adapter than the one supplied will void your products warranty.2. Please note, if the environmental temperature reaches 45°C or above, the car adapter can still supply power to device, but it will not charge the Lithium-ion battery. This is a characteristic of Li-polymer and is not a malfunction.

Power off, battery charging Red

Power off, battery full charged LED light off

Power on, battery charging Red

Power on, battery full charged Green

Standby / Standby with screen off Green

Recording/ Recording with screen off Flashing red

19

21

2.7 Powering the Device On / Off and Resetting 2.7.1 Auto Power On/Off

If the device is connected to the vehicle power supply, start the car engine, the device will automatically power on and start recording.

Once the vehicle engine shuts down, the device automatically saves the recording and powers off within 10 seconds.

2.7.2 Manual Power On/Off To manually turn on the power, press the POWER button.

To turn off, press and hold the POWER button for at least 2 seconds.

2.7.3 Reset

In case the device fails to function normally due to unknown causes, insert a pin or paper clip into the Reset hole for 5 seconds to restart the device.


22

2.8 Initial Settings Before using the device, we recommend you setup the correct Time zone, Date and Time.

Note:

Please note that if you press the / button during recording, the system will stop recording and enter the OSD menu. Before accessing the menu make sure the recording is stopped.

2.8.1 Set the Time Zone To set the time zone, do the following:

1. Press the / button to enter the OSD menu.

2. Press the or button to select Set Time Zone, and then press the button to enter the function menu.

3. Press the or button toset the current time zone, andthen press the button tosave the setting.

4. Press the button to return to recording screen.


23

Greenwich Mean Time (GMT) map of international time zones:

Note: 1. If Satellite Synchronization is on, the device clock will be set via satellite clock signal

based on the Set Time zone. 2. If satellite positioning is not available, the device clock will run based on the user

defined time.


24

2.8.2 Set the Date / Time To set the correct date and time, do the following:


2. Press the or button to select Date / Time, and then press the button to enter the function menu.

3.

4. Press the or button toadjust the value, and then pressthe button to set the dataand proceed to the next field.

5. Repeat step 3 until the date andtime setting is completed.

6. Press the button to return to recording screen.

Note: To ensure the accuracy of the video file time, please reset the date and time when the battery power runs out or when not in use for more than 7 days.


25

3 Using the Drive Recorder 3.1 Automatic Recording Once the car engine starts, the device will automatically power on and start recording.

Recording will automatically stop when the engine is switched off.

Note: 1. Some vehicle power supplies do not turn on / off automatically when the car engine

starts. If the device cannot automatically power on / off with the car engine, please manually connect the power supply to the vehicle power, and then power on, or manually power off the device and then remove the connector from the vehicle power supply.

2. The recorder can be configured to save a video file every 30 seconds, for between 1 to 3 minutes duration.

3. All the videos and photos are saved on the memory card, if memory card is full, loop recording will overwrite the oldest video file.


26

3.1.1 The Front Camera’s Recording Screen

No. Icon Item Description

1 Recording Duration

Indicates the video current duration.

2 Date / Time Indicates the current recording date and time.

3 Menu Button During video recording, press the button to enter the OSD menu.

4 Add Speed

Point Button

During video recording, press the button to add a speed cam point.

5 PIV (Picture

in Video) Button

Press to capture video screen shots from the front camera.

6 Emergency Recording

Button

During video recording, press the button to enter emergency recording mode.

00:10

OK


27

7 Switch

Camera Button

Press to switch VIV screen.(Rear Camera is not included in standard package. Please contact distributor for further information.)

8 Satellite

Positioning icon

Indicates the strength of satellite positioning. If the icon shows in red on screen, it indicates that the camcorder cannot complete the satellite positioning.

9 Speed Current driving speed.

10 Voice Record

icon Indicates voice recording sets as off, the sound will not be recorded.

11 Resolution

icon Indicates the video resolution.

12 TF Card

When a compatible micro SD memory

card is inserted, the LCD displays . If no memory card is inserted or if the memory card is damaged / incompatible,

the LCD displays

13 Battery Power icon

Indicates battery or camcorder charging status.

14 VIV (Video in

Video)

Indicates rear camera recording screen. (Rear Camera is not included in standard package. Please contact distributor for further information.)

15 Wi-Fi Wi-Fi on

Wi-Fi off


28

3.1.2 Emergency Recording To Start the Emergency Recording, do the following:

1. During Video Recording, press the / button to enter emergency recording mode, the “Emergency” message will be displayed immediately at the upper left corner of the screen, and the recorded file will be protected.

2. The emergency video recording length is the same as therecording interval setting. When the emergency recordingduration reaches the interval setting, the system will return tothe general recording mode.

Note: 1. If the Collision Detection function is enabled and a collision is detected, the device will

automatically trigger the emergency recording. 2. The emergency file is created as a new file and is saved in the Event folder, which will

be protected to avoid being overwritten by normal loop recording. The emergency video folder will occupy 40% of the available memory card capacity. For example, if you use 8GB memory card, about 3.2GB memory space will be reserved for emergency files. When the event folder is full, the oldest emergency file will be automatically deleted by the newest emergency file.


29

3.2 Add Speed Point You may customize speed cam positions in this product.

1. When the GPS positioning is active, press / to update speed camera points.

2. This product features a capacity for 200 speed cam positions.In case you are trying to add more than that the system willprompt with the message "Speed Position is full".

Note: You may delete custom speed cam positions by selecting the Delete Last Position or Delete All Position option from the Speed Position Management menu. Please note that all of your existing speed cam positions are deleted once the Delete All Position option is selected. Make sure you are ready to recreate your custom speed cam positions before running this option.

3.3 Picture in Video You can use this device to take snapshots of the current view.

1. In recording status, press / to capture screen shots from the front lens.

2. When the icon shows in the centre of the screen, it means the screenshot is captured.

Note: 1. The screenshot image resolution quality is dependent on the video resolution setting. 2. The picture resolution is limited by the speed of the target object and the quality of the

ambient lighting. The screenshot function is better used for taking still pictures in accident scenes or when the car is stopped waiting for a traffic light.


30

3.4 Driving Safety

Note: 1. The Driving Safety function is limited to triggering no more than two alarms at the

same time. If a voice and alert message have been triggered, any other alarm will be ignored until either of the two is settled.

2. Satellite positioning must be completed before functions such as Speed Cam Alert, Speed Position Management, Speed Limit Alert, LDWS and FCWS should be enabled. Be sure to check that Satellite positioning has been completed prior to using the product.

3. The detections of LDWS and FCWS may be inaccurate when used in rain, at night or in environments with insufficient lighting. Drivers are advised to exercise discretion based on actual road conditions.

3.4.1 Speed Cam Alert If the Speed Cam Alert function is enabled, once your car’s location is determined by GPS and approaches a speed cam, this product produces an audible alert and onscreen message. To enable the Speed Cam Alert:

1. Press the button to enter the OSD menu.

2. Press the /button to select SpeedCam Alert, and then

press the button to enter the function menu.

3. Press the /button to select On, and

then press the button to enable the function.

4. Press the button to return to the recording screen. 5. The alarm screen turns red to remind you to slow down if you

are driving faster than the speed limit.

Note: The Speed Cam Alert function must have the speed cam datum from the country you use. The function will be void if the product is used in any other countries. Please consult with the shop you purchased from if the function is void. There is no guarantee the speed cam datum will be included for other countries.

OK

OK

The following driving safety function is for reference only. Drivers are advised to exercise discretion based on actual road conditions.


31

3.4.2 Speed Limit Alert If the Speed Limit Alert function is enabled, this product produces an audible alert and screen message once your car’s location is determined by GPS and its running speed exceeds the set limit.

To activate the Speed Limit Alert, do the following:


2. Press the / button to select Speed Limit Alert, and then

press the button to enter the function menu.

3. Press the / button to set up a Speed Limit Alert to trigger this product’s alarm [Off / 50 ~ 200 km/h (30~125 mph)],

and then press the button to complete setting.

4. Press the button to return to the recording screen.

5. The alarm screen turns red to remind you to slow down if youare driving faster than the speed limit.

OK

OK


32

3.5 Parking Mode To monitor the vehicle when it is parked, you can activate Vibration Detection, or Motion Detection.

Follow the steps below to change the settings for Parking Mode:

1. Press the / button to enter the main menu.

2. Press the or button to select Parking Mode, and then press the button to confirm.

3. Press the or button toconfigure Parking Mode (Off /Vibration Detection / MotionDetection), and then press the

button to complete setting.


• Off: No parking monitoring activated.

• Vibration Detection:

- If disconnected from the external power supply when thedevice is powered on, the system will display the alertmessage “Press OK to power off or enter VibrationDetection after 10 sec”. This means the system willpower off and enter Vibration Detection automatically in10 seconds.

- Once Vibration Detection Mode is triggered, when thedevice detects any vibration, it will automatically power onand start recording, the event will be recorded for 60seconds (per file).

- In this mode, the device is powered off until the eventhappens. This mode uses power saving.

- To disable this function, in vibration detection recording,press any key to wake up the screen, and resume tonormal loop recording; or when the car engine is startedagain, it will be return to normal loop recording.


33

• Motion Detection:

- If disconnected from the external power supply when thedevice is powered on, the system will display the alertmessage “Press OK to power off or enter Parkingmode after 10 sec”. This means the system will enterMotion Detection automatically in 10 seconds, and thenthe LCD screen turns off (the device will turn off thescreen temporarily, but will remain in standby detectionstatus. Press any button to turn on the operation screenand resume normal loop recording).

- In Motion Detection mode, when the device detects anymotion in front of the lens, automatic recording will beactivated.

- In this mode, when the device detects any motion in frontof the lens, video recording will be triggered and the eventwill be recorded for 10 seconds (per file). If the event lastsmore than 10 seconds, the device will continue recordingup to 2 minutes.

- In this mode, the device is in standby mode until an eventhappens. This mode will consume more battery power.

- To disable this function, in the standby mode or motiondetection recording, press any key to wake up the screen,and resume normal loop recording; or when the carengine is started again, it will be return to normal looprecording.

Note: 1. If the battery is fully charged, it can record about 30 minute’s video in Motion Detection

mode. As the device is used, the battery storage capacity will decrease gradually. This is a normal phenomenon for the battery.

2. The video files taken in Vibration Detection mode will be saved in the Event recording folder, which will not be overwritten by normal video files.

3. The video files taken in Motion Detection mode will be saved in the normal recording folder.


34

3.6 Collision Detection If the Collision Detection function is enabled, this device begins emergency recording once it detects any collision. The sensitivity of the Collision Detection function is set to Normal by default, to change the settings of Collision Detection: 1. Press the / button to

enter the OSD menu. 2. Press the or button to

select Collision Detection, and then press the button to enter the function menu.

3. Press the or button to change the sensitivity of this device’s Collision Detection (Off / High Sensitivity / Normal Sensitivity / Low Sensitivity), and then press the button to set the sensitivity.

4. Press the button return to the recording screen.


35

3.7 Driver Fatigue Alert If the Driver Fatigue Alert function is enabled, this product produces an audible alert and screen message one hour after it has begun recording and repeats the alerts every half hour afterwards. To enable the Driver Fatigue Alert, do the following:


2. Press the / button to select Driver Fatigue Alert, and

then press the button to enter the function menu.

3. Press the / button to select On, and then press the

button to enable the function.

4. Press the button return to the recording screen. 5. This product produces an audible alert and screen message

when Driver Fatigue Alert activates.

3.8 LDWS

Once your car’s location is determined by GPS and the LDWS function is enabled, this camcorder produces an audible alert and screen message when you deviate from or change lanes at speeds over 70 km/h (43 mph).

To set the LDWS (Lane Departure Warning Systems):


2. Press the / button to select LDWS, and then press the

button to enter the function menu.




OK

OK

OK

OK


36

5. After enabling LDWS, the screen will display a traffic lane align

icon in green , please adjust the camcorder so theslash lines are centred in the driving lane.

6. This product produces an audible alert and screen messagewhen LDWS is activated.

Note: 1. Please measure the front windshield viewing area, do not block the driver's forward field

of view, and install the camcorder below rearview mirror (upper center of the front windshield). We recommend that the sky and the ground both occupy 50 % of the video screen, install the bracket then adjust the camcorder to ensure the lane is aligned to the lane alignment icon. Correct installation maximizes the efficiency and improves the accuracy of the LDWS function.

2. Make sure that the traffic lane align icon will not be obscured by other things (e.g. hood). It may cause misjudgment if the endpoint is obscured.


37

3.9 FCWS Once your car’s location is determined by GPS and the FCWS function is enabled, this camcorder produces an audible alert and screen message when you drive at speeds over 60 km/h (37 mph) and are less than 20 m away from the car in front of you. If the camcorder is not connected to a satellite, and the distance from the leading vehicle is below 20 meters, it will also produce a warning screen and an audible beep reminder. To set the FCWS (Forward Collision Warning System):


2. Press the / button to select FCWS, and then press the

button to enter the function menu.



4. Press the button to return to the recording screen. 5. This product produces an audible alert and screen message

when FCWS is activates.

OK

OK


38

3.10 2 Grid Function Chart

When the camcorder is recording, pressing the Power button

will enter the 2 GRID FUNCTION CHART in the LCD screen, users

can check vehicular information here. Pressing the Power

button once again will return to your recording.

No. Item No. Item

1 Driving Speed 2 Driving direction

Note: Driving Speed and Driving Direction are only applicable when satellite positioning is active; otherwise, they will be displayed grayed out. Satellite positioning function is dependent on the model purchased.


39

3.11 Playback Videos and Photos 3.11.1 Playback


2. Press the or button to select Playback, and then press the button to enter the function menu.

3. Press the or button toselect file types (Video / Event /Picture), and then press thebutton to enter menu.

4. Press or button to browse the files, select the file and then press the button to enter Playback Mode.

5. Press the repetitively to return to the recording screen.


40

3.11.2 Playback Mode


1 File Type Indicates the type of file currently playing.

2 File Name Indicates the file name of video / picture.

3

Duration / Total

recorded time

Indicates the video elapsed time / Indicates total recorded time.

Date and time Date and time the photo was taken.

4 Return

Press the button to return to preview screen of video or picture. Press the button repetitively to return to the recording screen.

5 Previous File

Button Press button to view previous file.

6 Next File Button

Press button to view next file.

7 / Playback/

Pause button Press the / / button to play or pause the video.

8 TF Card When a compatible memory card

is inserted, the LCD displays .

00:10 / 01:00

2017/01/01

12:00

Video Playback Screen Picture Playback Screen

6

1

3

4

5

9

11

7

2

8

10

1

3

4

56

9

11

2

8

10


41


If no memory card is inserted or if the memory card is damaged / incompatible, the LCD displays

.

9 Battery icon Indicates battery power and charging status.

10 Serial Number Shows the current file number and total file number.

11 Time Stamp Indicates the date and time of the video or photo.

3.12 Deleting Files

To delete file(s), perform the following steps:



42

2. Press the or button toselect File Deletion, and thenpress the button to enter thefunction menu.

3. Press the or button toselect file types (Video / Event /Picture), and then press thebutton to enter the menu.

• Delete One:

- Press the or button to select Delete One, and then press button to enter the menu.

- Press or button to browse files, select the files you want to delete and then press the button to enter the menu.

- Press the or button to select the item, and then press the or button to confirm or cancel the selection.


43

• Delete All:

- Press the or button to select Delete All, and then press the button to delete all the files in this file type.

4. Press the repetitively to return to the recording screen.

Note: Deleted files CANNOT be recovered. Ensure the files you wish to preserve are backed up before deletion.


44

4 Initial set up Drive HD application 4.1 Camcorder application installation

The camcorder allows you to connect to the mobile devices via the App. When using for the first time, install the [Drive HD] App for your mobile device.

1. Download Drive HD App from Google Play or App Store.

2. Install the App.

APP layout and features may be changed subject to different software versions. Please refer to Google Play or APP Store for update.


45

4.2 Wi-Fi connecting 1. Press the Power button to switch on the camcorder.2. Enter Menu and go to Wi-Fi option; choose “ON” to activate the

wireless network.3. The camcorder’s screen will display Wi-Fi Device ID and

Password. Using the Wi-Fi function of your mobile device,search for the camcorder ID “ Snooper_drive HD_XXXXX”from the list (last 5 numbers are system random numbers).Enter default password 00000000.

4. There is a Wi-Fi icon on the camcorder’s screen. Once the iconis blue, your connection has been successfully established.

Note: 1. The mobile device shall be within a maximum of a 5m distance from the camcorder without

any buildings in between. 2. When the Wi-Fi function of the camcorder is ON but not yet connecting with your mobile

device, or the connection is disconnected, the Wi-Fi icon on camcorder’s screen will be white, and you will need to re-activate the Wi-Fi and re-pair with your mobile device.

3. After connecting the mobile device with the camcorder, and activate app feature “Camera Preview”, all the button operation of the camcorder will be disable; all the operations shall be carried out via the Drive HD App.

4. The language of the Drive HD App will be consistent with your mobile device, beyond the language options, the App will be activated with default language.


46

5 Using the Drive HD application

Touch icon to activate the application. The main screen will open.

. Follow the below instruction to operate this application.


47

5.1 Camera and Wi-Fi Setting

5.1.1 Wi-Fi Setting

You can use this feature to set up new Wi-Fi ID and password.

1. Touch icon [Camera & WiFi Setting].

2. Touch [WiFi Setting].

3. Enter new Wi-Fi ID and password, and touch [Update] tore-new setting.

4. Using the Wi-Fi function of your mobile device, search for newWi-Fi ID from the list and enter new password. The Wi-Fi iconon the camcorder’s screen will turn to green, and yourconnection has been successfully established.


48

5.1.2 Camera Setting

You can use this feature to set up your car camcorder.

1. Touch icon [Camera & WiFi Setting].

2. Touch [Camera Setting].

3. Refer to the below table for details of menu items and availablemenu options.

Menu option Description Available option

Resolution Set the desired video resolution.

1080P / 30 fps, 1080P/ 27.5 fps, 720P / 30 fps, 720P/ 55 fps

Collision Detection

If Collision Detection is activated, this camcorder starts emergency recording once it detects any collision.

Off/Low Sensitivity/ Normal Sensitivity/ High Sensitivity

Anti-flicker

Domestic power supply varies by area. It is recommended that you should check the “Table of voltage and frequency of different countries” for the correct setting.

50Hz / 60Hz

EV Setting of exposure value. +2 ~ -2

Date/Time Synchronize car camcorder’s date/time with mobile device

Firmware Version

Indicates the current car camcorder’s firmware version.

App Version Indicates the current application version.


49

5.2 Camera preview, record, snapshot You can use this feature to preview, record or take snapshot.

1. Touch icon [Camera Preview]，

2. The mobile device will display camcorder’s preview screen. Thecamcorder will lose control and screen will show ”NetworkStreaming”. Please use Drive HD app to operate the camcorder.

icon Description

1 Start/stop recording

2 Snapshot (no matter in front camcorder or rear camcorder preview, once you touch this icon, both of front and rear camcorder will take photo.)

3 Switch front and rear camcorder preview

Note: [Camera Preview] is subject to car camcorder in recording mode.


50

5.3 Playback, delete, download

You can use this feature to playback or delete the file saved in camcorder, or to download the file from camcorder to your mobile device.

1. Touch icon [Camera Playback].

2. The files saved in the camcorder will be displayed on yourmobile device. Camcorder will stop recording for a few secondsuntil your mobile device finishes reading the saved files fromcamcorder, and screen will show ”Network Playback”.

3. Pick up the file that you want to playback, delete or download,and touch below icon to execute.


51

Icon Description

1 Playback

2 Delete

3 Download the file from camcorder to your mobile device

4 Switch front and rear camcorder

5 File folder option: Event, Video, Photo

Note:

1. If you find the video playback without audio, please check if you turn on Voice Record on the menu. If you do turn it on, it means the mobile device itself doesn’t support the video decoding. It’s not the problem of the file. We recommend you to install a free app software such as VLC to playback the file.

2. Deleted files cannot be recovered. Ensure the files have been backed-up before deletion.

3. Picture and video files could be downloaded to the internal memory of your mobile device. Use the application program in your mobile device to view the file.


52

5.4 Local album You can use this feature to playback or delete the file that you download to your mobile device.

1. Touch icon [Local Album]。

2. Pick up the file that you want to playback or delete, and touchbelow icon to execute.

Icon Description

1 Playback

2 Delete

Note: 1. Deleted files cannot be recovered. Ensure the files have been backed-up before deletion. 2. If you find the downloaded files could not be played or without audio, which means the

mobile device itself does not support the video decoding. It’s not the problem of the file. We recommend you to install a free App software such as VLC to playback the file.


53

6 Adjusting the Settings 6.1 Using the Menu Refer to the table below for details of the main menu and function list.


Playback Select the file category that you want to view. (Rear camera only available with DVR-5HD)

Video (Front camera) Video (Rear camera) Event (Front camera) Event (Rear camera) Picture (Front camera) Picture (Rear camera)

Wi-Fi Set up Wi-Fi linkage of a mobile phone.

On / Off

Satellite Status Displays the current state of the satellite reception.

Satellite Synchronization

If the satellite time is enabled, the drive recorder clock will synchronize according to the satellite time zone you set. When you turn on this feature, it will display the satellite time preferentially, and cannot be manually changed.

On / Off

Speed Unit The system displays the speed setting unit.

KM/H / MPH

Speed Cam Alert

If the Speed Cam Alert function is enabled, once your car’s location is determined by GPS and approaches a speed cam, this product produces an audible alert and screen message.

On / Off

Speed Position Management

Add Speed Point: The satellite positioning will manually add speed camera location. You can add up to 200 speed camera locations to the built-in system. Delete Last Position: Delete the last speed camera point. Delete All Position: Delete all speed camera points.

Add Speed Point / Delete Last Position / Delete All Position


54


Speed Limit Alert

Set a customized maximum speed limit. When the vehicle speed exceeds the maximum, an audible alert is automatically triggered and a warning message is displayed on the screen.

Press the /button to set the speed limit. You can set it off, or set speed limit from 50 to 200km/h (30 to 125mph)

Set Time Zone Set the time zone you are in.

Press the /button to set the satellite time. You may customize it between GMT -12:00 ~ GMT +13:00

Date / Time Set the date and time.

Press the /button to adjust the value, and then press the button to set the next field, and complete setting

Language Language setting.

English∕ Español/ Deutsch/ Italiano/ Français/ Nederlands

Time Stamp If the time stamp is enabled, recorded files or photos will show the date and time.

On / Off

Resolution Setting of video resolution. 1080P 30fps / 720P 30fps

EV Setting of exposure value.

Press the /button to set the exposure value. It can be set between -2 ~ +2

LCD Setting

Set LCD off time. Device screen will be off after a set time if no operation is detected during the standby or record mode. Pressing any button will switch it on. (Recording is not affected when screen is off).

On / Turn Off After 7 sec. / Turn Off After 1 min. / Turn Off After 3 min.

Voice Record Setting for activating audio in the video.

On / Off


55


Key Tone Enable / disable key tone. On / Off

Volume Adjust the power-on sound and key tone volume.

Press the /button to set the volume. It can be set between 0 ~ 10.

Record Interval Save respective video files in a length of the selected duration.

30 sec. / 1 min. / 3 min.

Parking Mode

If one of the parking modes is activated, the device will enter parking mode 10 seconds after disconnecting from the external power source.

Off / Vibration Detection / Motion Detection

Collision Detection

If Collision Detection is activated, this device starts an emergency recording once it detects any collision.

Off / High Sensitivity / Normal Sensitivity / Low Sensitivity

Driver Fatigue Alert

When Driver Fatigue Alert is enabled, audible alert and screen message will be activated 1 hour after the camcorder is powered on, with a repetition every 30 minutes.

On / Off

LDWS

Once your car’s location is determined by GPS and the LDWS function is enabled, the camcorder produces an audible alert and screen message when you deviate from or change lanes at speeds over 70 km/h (43 mph).

On / Off


56


FCWS

When FCWS is activated after satellite positioning, the camcorder will issue an audible alert and screen message when vehicle speed is above 60 km/h (37 mph) and the distance between the front vehicle is less than 20m.

On / Off

File Deletion Delete the file(s). Video / Event / Picture

Anti-flicker

Domestic power supply varies by area. It is recommended that you should check the “Table of voltage and frequency of different countries” for the correct setting.

60 Hz / 50 Hz

Format Format the inserted memory card. All the files on the card will be erased.

Yes / No

Default The system reverts to the default settings.

Yes / No

Firmware Version

Indicates the current firmware version.


57

7 Connecting to Other Devices 7.1 Connecting to the Computer You can connect the device to a desktop computer or notebook to transfer or view files. 1. Connect the mini USB cable to the power connector port of the

device.2. Connect the other end of USB cable to an available USB port of

your computer.

3. Power on the device, the computer screen will show themessage "Open folder to view files", or open the "RemovableDisk" when the computer detects your device. Confirm themessage and then users can save the files to your computer.

Note: This only indicates the device can connect to the computer; mini USB cable is not included in standard package.

USB


58

7.2 Connecting to TV

You can use a HDMI cable to connect to a TV to play the file.

1. Power on the device.

2. Connect HDMI cable to device HDMI port.

3. Connect HDMI cable to TV HDMI port.

4. Power on TV, switch TV signal input to HDMI, use the / / / buttons to operate the device.

Note: 1. It only indicates this device can connect to TV, HDMI cables are not included in the

standard package. 2. Please make sure the device is powered on before using the HDMI cable to connect to

the TV.


59

8 Installing the Software

1. Place the attached CD ROM into the CD drive.

2. If the CD does not execute automatically, please use WindowsFile Manager to execute the Install_CD.exe file on the CD.

The following screen will be displayed.

3. Press the [Menu] item to start the installation process andfollow the instructions on-screen.


60

9 Updating speed trap data Updating the speed trap data is simple. Register your device at http://www.snooperneo.co.uk once registered, follow the on-screen instructions. For subsequent downloads please follow the instructions below:

1. For DVR-4HD Gen 2 go to or click on the link below:

https://www.snooperneo.co.uk/SoftwareDVR.cfm?type=305

and enter your serial number.

For DVR-5HD Gen 2 go to or click on the link below:

https://www.snooperneo.co.uk/SoftwareDVR.cfm?type=306

2. Download by clicking the link on the webpage , when prompted

save the file to your PC.

3. Unzip the downloaded file and copy the files:“SdFwCode.bin” & “DVR401.bin” on to a micro SD card.

4. Insert the micro SD card into the DVR-4HD or DVR-5HD gen2.

5. Press the button, and then connect a power adaptor to power on the dash camera.

You can release the button when you see the device begin to update.

6.

Do not disconnect power form the device until the

update has completed.

7. Once the update has completed the device will switch offthe

device will automatically the .BIN file from the SD card.


61

10 Snooper DVR Player

No. Item No. Item

1 Front Camera View 9 G sensor

2 Rear Camera View 10 Volume control

3 File name* 11 Browse files

4 Google Map view 12 Playback Duration / Total Duration

5 Current File details * For file playback ONLY select file from the Front (F) folder6 Speed kmh/mph

7 Compass

8 Play back controls

Note: 1. To display the route on Google Maps, please make sure the internet is connected

before starting the video playback. 2. Video files recorded using the front camera (MOV) and the GPS/G-Sensor files (NMEA)

must be stored in the same folder before starting the playback. 3. The Snooper DVR software is only available on the Windows operating system.


62

11 Specifications

Item Description

Image sensor 1/2.9” SONY sensor

Effective pixels 1920 (H) x 1080 (V)

Storage media Supports Micro SDHC, up to 32GB class 10 speed or greater

LCD display 3” LCD colour TFT

Lens Wide Angle Fixed Focus lens

Aperture: Up to F1.8

Focus range 1.5m~Infinity

Satellite System GPS

Video

Resolution: Full HD 1920 x 1080 @ 30fps

HD 1280 x 720 @30fps

Format: MOV

Still image (Photograph)

Resolution: depends on video resolution setting

Format: DCF (JPG)

Shutter Electronic shutter

Auto: 1/33、120~1/30 sec.

G-Sensor 3-Axis G-Force sensor

ISO Auto

White Balance Auto

Microphone Built-in

Speaker Built-in

Interface Mini USB, A/V port, HDMI

Battery Built-in Li-polymer rechargeable (This battery is NOT replaceable)


63

Item Description

Operating Temperature

0° ~ 60° C

Operating Humidity

20 ~ 70% RH

Storage Temperature

-20° ~ 70° C

Dimensions 87.6 x 53 x 28.5 mm

Weight Approx. 86g (without memory card)

Rear Camera (DVR-5HD only):

Item Description

Image Sensor 1/2.9” SONY sensor

Effective Pixels 1920 (H) x 1080 (V)

Lens Wide Angle Fixed Focus lens F2.0, f=3.8mm

Focus Range 1.5m~Infinity

Movie Clip Resolution: FHD@30 (1080P 30fps)

Format: MOV

Operating Temperature

0° ~ 50° C

Storage Temperature

-20° ~ 70° C

Dimensions 65 x 36.5 x 25.5 mm

Weight Approx. 22g


64

12 Service Under Warranty Snooper comes with a standard 12 month manufacturer’s warranty. Register your device for warranty at www.snooperneo.co.uk

Faulty Products up to 30 days from purchase. Refund or Replace Policy, Contact Seller directly for this. The consumer is responsible to ensure software is up to date. All products must be complete with accessories and original packaging on return.

Faulty Products from 31 days to 12 months from purchase. Snooper (Performance Products Ltd) will offer a prompt repair service. In all cases we reserve the right to inspect the product and verify the fault. Contact Seller for their returns procedure, all warranty claims MUST go through the seller. Consumer is responsible for software updates!

We do not cover faults caused by accident, neglect, misuse or normal wear and tear. All products must be complete with accessories and original packaging on return.

PLEASE NOTE: We cannot process any warranty claims unless proof of purchase is provided. Please retain your receipt as a precaution.

Full terms and conditions of warranty are available on request.

Limited Warranty This Snooper product is warranted against all defects in materials and workmanship for a period of one (1) year from the date of original purchase, when purchased from an authorized Snooper dealer.

ALL PURCHASES OF SNOOPER PRODUCTS FROM NON-AUTHORIZED SNOOPER DEALERS ARE SUBJECT TO FURTHER WARRANTY RESTRICTIONS AS DESCRIBED BELOW.

The conditions of this Limited Warranty and the extent of responsibility of Performance Products Ltd (PPL) under this Limited Warranty are as follows:

1. This Limited Warranty will become void if service is performed by anyone other than an approved Snooper Warranty Service Centre that results in damage to the product.

2. This Limited Warranty does not apply to any product which has been subject to misuse, neglect or accident, or which has had the serial number altered, defaced or removed, or which has been connected, installed, adjusted or repaired, other than in accordance with the instructions provided by Snooper.

3. Should you have any difficulties with the performance of this product during the warranty period, please call Snooper or visit our web site http://www.snooperneo.co.uk. You may also contact Snooper Customer Services at the address listed below for any service help you may need with Snooper products.

4. PROOF OF DATE OF PURCHASE FROM AN AUTHORIZED SNOOPER DEALER WILL BE REQUIRED FOR ANY WARRANTY SERVICE OF THIS PRODUCT.

5. SNOOPER PRODUCTS PURCHASED FROM A SOURCE OTHER THAN AN AUTHORIZED SNOOPER DEALER, INCLUDING ANY AND ALL PURCHASES VIA THE INTERNET FROM A NON INTERNET AUTHORIZED SNOOPER DEALER,


65

SHALL NOT BE COVERED BY ANY SNOOPER LIMITED WARRANTY TO THE EXTENT ALLOWED BY APPLICABLE LAW.

6. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM EU COUNTRY TO EU COUNTRY.

7. ALL IMPLIED WARRANTIES, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, SHALL HAVE NO GREATER DURATION THAN THE WARRANTY PERIOD SET FORTH ABOVE. UNDER NO CIRCUMSTANCES SHALL SNOOPER BE LIABLE FOR ANY LOSS OR DAMAGE, DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT. BECAUSE SOME EU COUNTRIES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSIONS OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.

8. Product must be shipped in its original carton or equivalent carton, fully insured, with shipping charges prepaid. Snooper will not assume any responsibility for any loss or damage incurred in shipping.

9. The sole responsibility of Snooper under this Limited Warranty shall be limited to the repair of the product or the replacement of the product only (whichever is deemed appropriate and at the sole discretion of Snooper).

10. This Limited Warranty does not cover car static or other electrical interferences, labour costs or any other associated or incidental costs incurred for the removal or reinstallation of the unit for repair.


Performance Products Ltd, Cleaver House, Sarus Court, Manor Park, Runcorn,

Cheshire, WA7 1UL. Tel +44 (0)1928 579579 E: [email protected].

www.snooper.co.uk

SnooperUK @snooperuk Snooper UK

Documents

3rd Generation Vehicle Drive Recorder 2018 · Thank you for purchasing this advanced drive recorder. This product is specifically designed for real time video recording when driving