Upload
mohita-kaushik
View
53
Download
0
Tags:
Embed Size (px)
Citation preview
1 | P a g e
Submitted by: Group B5 Subodh Nath (12051)
Himanshu Singh Gurjar (12080)
Omkar Rajyaguru (12096)
Syam Thomas (12114)
Lalit Rana (12146)
Mohita Kaushik (12150)
Tahir Mustaq (12174)
Innovation at 3M Corp.-(Case Analysis)
Submitted to- Dr. Suresh M. R.
Submitted to: Dr. Suresh M.R.
Marketing Research & PM
Associate Professor - Marketing,
SDMIMD, Mysore
2 | P a g e
Contents
Introduction & Case Facts............................................................................................................... 3
SWOT ANALYSIS ................................................................................................................................ 4
Financial Data .................................................................................................................................... 4
Profit and Loss Account .......................................................................................................................... 5
Ratio Analysis of 3M .......................................................................................................................... 5
Analysis: ................................................................................................................................................. 6
ISSUES IN THE CASE ................................................................................................................................. 7
IDEA GENERATION ............................................................................................................................ 8
LEAD USER GROUP IDEA GENERATION ................................................................................................... 8
Benefits of the Lead User Method .......................................................................................................... 9
Lead User Research Methodology in Detail ........................................................................................... 9
Strategic Portfolio Management ........................................................................................................... 11
Solution on the basis of Portfolio Management .................................................................................... 11
Findings and Recommendations ........................................................................................................... 11
Conclusion ............................................................................................................................................ 11
3 | P a g e
Introduction & Case Facts The Minnesota Mining and Manufacturing Company (3M) has a long history of innovation. Founded
on the North Shore of Lake Superior at Two Harbours, Minnesota in 1902.With over 76,000
employees 3M produces over 55,000 products, including: adhesives, abrasives, laminates, passive fire
protection, dental products, electrical materials, electronic circuits and optical films. Known for such
products as the,
Post-it, which revolutionized the way individuals communicate
Masking tape, for the automobile industry which sung a new era for 3M
Waterproof sandpaper, the world's first waterproof sandpaper, which reduced airborne dusts
during automobile manufacturing, was developed in the early 1920s.
A second major milestone occurred in 1925 when Richard G. Drew, a young lab assistant, invented
masking tape – an innovative step toward diversification and the first of many Scotch® Pressure-
Sensitive Tapes.
Beyond these innovative products, 3M initially branched out into health care in 1961. This unit of 3M
has grown substantially since that time, and in more recent years it has seen annual sales reach more
than two billion dollars.
McKnight’s philosophy of delegating responsibility, creating a corporate culture that encourages
employee initiative and innovation. This philosophy had a profound impact on the way 3M does
business-“15% of all employees’ time is allowed to be on their pet projects (the “3M Way”)”.
The Health Care Unit is a core component of 3M’s business model. Although, the unit was recording
significant and increasing sales, it had failed to introduce a successful product in almost a decade.
This did not jibe well with one of the company’s key objectives, which aimed to see at least thirty per
cent of sales originate from products that did not exist four years earlier.
Rita Shor, a senior product specialist, and a hand-picked group of subject matter experts were tackling
this challenge using a new and innovative market research method called “Lead User Research.”
Lead user is a term which Eric von Hippel of MIT developed in 1986 and was first described in the
July 1986 issue of Management Science.. His definition for lead user:
Lead users face needs that will be general in a marketplace – but face them months or years
before the bulk of that marketplace encounters them, and
Lead users are positioned to benefit significantly by obtaining a solution to those needs.
In simpler words, lead users are users of a product or service that currently experience needs still
unknown to the public and who also benefit greatly if they obtain a solution to these needs. Because
lead users innovate, they are considered to be one example or type of the creative consumer’s
phenomenon.
This method addressed some of the shortcomings of the more traditional market research methods
implemented by the company.
Rita and her team comprised of individuals with a wide breadth of expertise and backgrounds,
including antimicrobial pharmacology, chemistry, dermatology, biology, veterinary science, and even
Broadway make-up artistry. After many months implementing the new market research technique,
landed on four recommendations. Three of the recommendations would see the introduction of new
4 | P a g e
12500
13000
13500
14000
14500
15000
15500
1995 1996 1997
Am
ou
nt
in M
illio
n $
Sales
Series1
2100
2200
2300
2400
2500
2600
2700
2800
1995 1996 1997
Am
ou
nt
in M
illio
n $
Operating Profit
Series1
product lines, whereas the fourth recommendation hinged on a complete rewrite of the Health Care
Unit’s business strategy.
Rita and her team were spending considerable time discussing the best path forward and trying to
determine the ultimate recommendations they would make to the senior management team of the unit.
SWOT ANALYSIS
(Strengths)
1. Strong research and development
capability
2. Diversified business portfolio Strong
financial performances
3. Strong return on average assets and
investments
(Weaknesses)
1. Poor inventory management
2. Increasing cost of healthcare segment
3. Focus on the Incremental innovation
(Opportunities)
1. Growing demand for LCDs
2. Rising healthcare spending in the US
Global expansion
3. Health care was more hygiene
conscious
(Threats)
1. Growth in private labels
2. Exchange rate fluctuations
3. Slowing sales of the Organisation
Financial Data
5 | P a g e
Profit and Loss Account
Ratio Analysis of 3M
PROFITABILITY RATIO=PROFIT/SALES
Particular
1997 ($ in
million)
1996 ($ in
million)
1995 ($ in
million)
PROFIT 976 1526 2121
SALES 13460 14236 15070
RATIO 7.25% 10.72% 14.07%
GP MARGIN=GP/SALES
Particular
1997 ($ in
million)
1996 ($ in
million)
1995 ($ in
million)
GP 6599 7020 7360
SALES 13460 14236 15070
RATIO 49.03% 49.31% 48.84%
Operating profit margin=Operating profit/sales
Particular
1997 ($ in
million)
1996 ($ in
million)
1995 ($ in
million)
Operating
Profit 2300 2491 2675
SALES 13460 14236 15070
RATIO 17.09% 17.50% 17.75%
Data used:
• P&L statement from the year 1995 to 1997.
Key financial indicators used:
• Sales, COGS (Cost Of Goods Sold), Net profit, ROE%.
Methodologies used:
• Ratio analysis
• Analysis of P&L statement
6 | P a g e
Analysis: From the data available for “3M Corporations” we can analyse some of the financial aspects. First of
all, we would make the analysis of major three performance indicating items of P&L statement which
is presented in exhibit number 1, 2 and 3.
Exhibit 1:
It shows amount of sales generated by the company over the three years duration starting from 1995
to 1997. If we compare the sales data of year 1995 with the year 1996, we can see that it is an increase
of 5.77%. Further, we can see that the increase is increasing when we make the calculation of 1996
and 1997. The increase in sales over this two years is 5.86%. We can clearly see that the amount
invested in R&D which is also increasing in nature is giving fruitful results and the products is well
accepted in the market.
Exhibit 2:
This shows the amount of operating profit. Profit generated through operating activities is the
important thing to take into consideration because, it shows the direct relationship between sales and
expense related to operating activities of the production. This indicates the amount of operating
expenses done. When the sales is increasing, the operating expenses also increases and the same leads
to increase in operating profit. Now if we see the data we have in Exhibit 2, we can see that it is
increasing which is good sign but the amount of increase in operating profit form the year 1995 to
1996 is 8.30% while in the next year the increase is 7.39%. which means it is increasing at the
decreasing rate. May be the new products are consuming more resources and the sales of the products
are not able to match the operating profit that effectively. This give an alarm to the company to reduce
its operating profit.
Exhibit 3:
The amount of investment generated form the public requires good amount of return. This will
showcase the value of the company in the market. Now again the ROE% is increasing which is very
apparent but it has increased for 19% to 24% to directly 36%. Shareholders are getting more returns
out of the profit generated. Taking long term existence of the company, we hope that this is the
reviewed decision.
Form the main points of P&L accounts, we will move to some of the indicative ratio calculations
which gives the comparison view and as in this statement sales is the most important and primary
thing we will get a chance to compare all the other amount with respect to sales.
Profitability ratio:
This ratio measures the amount of profit generated out of the amount of sales. Of this ratio is say, 55
that means that out of the sales of 100 Rs. We are getting a profit of 5 Rs. Now in this case, we can
see that the ratio is increasing in increasing order which goes form 7.25% to 10.25% to 14.07% which
is the good indicator for the company. Now this trend can be explained by the amount of sales
increase. Even though the operating profit Is decreasing the net profit is also the element contributing
in high profitability ratio. This also may be the reason to increase in market value of company.
Gross Profit Margin:
When you deduct the cost of goods sold form the sales, we get gross profit. This is also a very
important aspect of the evaluation on the part of the company. (may not be that important for the
7 | P a g e
external stakeholders). Now this ratio almost remains same. Even though the percentage, it is
indicating that it also is getting decreasing trend. This can be explained by the high level of cost of
goods sold. But as this is logical if the products are innovative and newly developed. This trend can
be for the short term. Once the company gets the expertise in the production of these products, it is
likely to reduce COGS and increase the ratio.
Operating Profit Margin:
The operating profit margin measures the percentage of each sales rupee remaining after all cost and
expense other than interest, tax and preferred stock dividends are deducted. It represents the pure
profit earned on each sales rupee. It measures only the profit earned on operations and ignored other
listed things. A high operating profit margin is always preferred. This is the same trend that we can
see here. The ratios are high and increasing also but very slowly. We can point out the little
difference in the increase when we compare the data given above. It is 17.09% in the year 1995 which
increased and became 17.50% in the year 1996 and in the next year it increased to 17.75%. This is the
good trend and the company is likely to keep it up.
Conclusion:
• From the data available, and the calculation we have made we can infer that the company is
definitely doing well.
• The point of increase in cost of goods sold need to be taken into the consideration. Though the trend
shows thumb up.
• It is good that the EPS is high but again increase in dividend percentage decreases the amount of
retained earnings and reserves. For the fast growing company like this always required good amount
of both. Now one needs to look at long term goal instead of increasing the value of the company in the
market for the short term.
• From all the available data we have, the calculations made are not sufficient to make any positive or
the negative conclusive comment on any financial aspect of the company.
ISSUES IN THE CASE The Minnesota Mining and Manufacturing Company (3M) had a long and famous history of
innovation. They were known for products, which revolutionized the way individuals communicate,
masking tape, and waterproof sandpaper.
The Health Care Unit was an important component of 3M’s business model, contributing a large
percentage to the company’s revenue streams. Although, the unit was recording significant sales, it
had failed to introduce a successful product in almost a decade. Given that the company had set one of
its working objectives to produce thirty per cent of sales from products that did not exist four years
earlier.
Other problems faced by the Medical Surgical Market Division are as following:
• Traditional market research methods were marred with shortcomings, and have proved to be
ineffective in helping the Health Care Unit understand customer and market needs
• The Lead user Research yielded four ideas. Three of them where direct extensions of existing
product lines and materials to be used were already available at 3M and a fourth recommendation that
might potentially result in having the whole business unit’s strategy statement rewritten
8 | P a g e
• No proper understating about the market in developing nations and their healthcare needs
• Saturating Current Markets
• The Lead user Research team were not allowed to work freely on the new Research Methodology as
they were still expected to do their traditional duties
IDEA GENERATION 3 M moved away from their traditional way of marketing research and their conventional way of Idea
generation.
Original 3M Idea generation Methods-
1. Hiring Marketing research was adding a new interface which dilutes the customer response.
2. Information obtained by not proprietary but very general taken from text books.
3. Focus groups and customer provided no new or future oriented data thus was not very helpful
for disruptive innovation.
4. Too few new product idea and only incremental innovations was happening.
5. Customer didn’t know their needs and requirements
LEAD USER GROUP IDEA GENERATION There are certain customers who sense and are aware of their needs ahead of others and they
innovate on their own. These customers are called lead user. 3M adopted this process of
Innovation to boost the innovation in the organization. The Lead user Idea generation and
evaluation takes place in various phases.
1. Focus on the needs of leading-edge users, not routine users;
2. Seek not only needs data but innovations—user developed solutions to leading-edge
needs—from users;
3. Seek needs and solutions in adjacent markets and nonobvious, analogous markets, in
addition to target markets;
4. Employ a cross disciplinary team, bringing in perspectives from various parts of the
organization.
Various Idea Sources
Nurses
Current Customers
Sales Personnel’s
Researchers
Marketing Research Reports
Products Developers
Engineers
Doctors (Physicians)
Focus Groups
Customer Evaluation
Scientists
Technologists
Data for the Diseases
9 | P a g e
Benefits of the Lead User Method
In this era of accelerated innovation cycles, project teams may not have an extended period of
time to develop a research project with outcomes that are difficult to predict. Temporary
teams especially cross functional teams and part-time teams do not always get appropriate
support and “air cover” from management, which can undermine their effectiveness and rob
the project of needed resources.
1. Finding the right people: Reaching the real lead users and lead-use expert
2. Getting the right people to answer the e-mail or phone call.
3. Remaining open-minded about problems and solutions.
4. Allocating enough time for the process
Lead User Research Methodology in Detail Lead user research methodology is a non-traditional method of finding out what innovative products
can be brought into the market by learning various new techniques or requirements of lead users, or
users who have their own innovations in their particular field. Lead user research methodology
requires a lot of open mindedness, because the result of the research may not be anywhere close to
what the initial thought about the research would have been.
Let’s take the case of 3M and see if they did lead user research methodology the right way.
Some of the points the group noted, that did not go along with the principles of lead user research was
that, Shor and her team concentrated only on infections and how to contain them, while during the
research itself various other opportunities showed up, like requirement of flexible equipment for
mobile medical units, or the requirement of better communication and computer devices. Shor and her
teammates missed out on a huge gap that 3M could have gone into. Another major problem that the
group came upon was that, the team failed to address all of the three essential elements of success,
like mentioned above, they clearly missed some of the basic principles of lead user research, and very
importantly they did not have a supportive management, the management should have understood the
importance and the freedom the research requires and should have given the team time and removed
the pressure factor, thus distorting their focus. The change in leadership to Sam Dunlop did not help
the team, and clearly violated one of the necessary three elements required for a successful lead user
research. However the interdisciplinary team selected was good and they did do their part well, even
with external pressure.
Let’s take each stage of the lead user research methodology and analyse where could have
3M gone wrong:
Stage I – Project Planning
The initial stage is of extreme importance and the conclusions made here form the basis of
the entire research, however the team made a mistake in the initial stage by not defining the
level of innovation that they required, the level was definitely pretty high as 3M wanted to
enter into more innovative products in the healthcare industry, however the team stuck to
infection containment alone. Another mistake done in Stage I was that the meetings were
contained to within the team, and informal meetings with industry experts, suppliers, and
doctors were missed.
10 | P a g e
Stage II – Trends/Needs Identification
Though the second stage started off well with a workshop and identification of lead users,
they missed out on a great amount of detail that MASH units gave them. The MASH units
were lead users on their own, but the team failed to realize their potential, as the perspective
of the team was limited to infection containment. The MASH unit gave in a lot of gaps that
the mobile medical industry requires which 3M could have tapped into, but the team failed to
see that.
Stage III – Preliminary Concept Generation
By Stage III, the team is supposed to find the business potential of the product being
conceptualized, but the team failed to have a clear idea in mind by this stage, they were also
supposed to continue interviewing lead experts to get more technical knowledge, but the 3M
team was still searching for lead users at that time, without realizing the opportunities they
ran into, they tried to find better opportunities in developed countries and they did find some
good options, including the idea of selling cheap equipment to these countries. The
“economic” line that came up in the later stage was good for these countries, but they failed
to go into the business potential of the proposed line, or consult with various lead experts to
know about the technicalities of such a line.
Stage IV – Final Concept Generation
This stage went beautifully for the 3M lead user research team, the workshop held worked and three
concrete ideas came up. But again their main concentration was on infection control and they failed to
see the open opportunities outside of that. However the ideas that came up were good. However no
mention of design concepts, or how this product is going to be released into the market is mentioned.
The fourth recommendation did identify a major gap and did propose a greater role for 3M, but the
group felt that they were narrowing down their options too much, and failed to see a broader
perspective to the whole thing. Another thing that we noticed was that if the management were
supportive enough the recommendation of such an idea would not have been in such a dilemma.
Overall, the team did do a good job, but they lacked to follow procedure, a time gap was also
seen as Stage II was running into Stage III. The team also lacked a broader perspective and
failed to see opportunities right in front of them. The major reason behind the confusion
behind the whole issue could be the unsupportive approach of the management. Considering
that 3M is a company who leads in the innovation front, a new idea or concept should have
been gracefully accepted, but the management was not extremely supportive of the whole
idea.
11 | P a g e
Strategic Portfolio Management
Low Market Newness High Market Newness
Low Product
Newness
“Economy Line”
Medium
Product
Newness
High Product
Newness
Antimicrobial “Armor” Line The “Skin Doctor” Line
The “Economy”, “Skin Doctor”, and the Antimicrobial “Armour” Line would allow 3M to promote a
balanced, risk-free portfolio containing both incremental and breakthrough innovations.
Solution on the basis of Portfolio Management The three Product Lines mentioned in the diagram above have the potential to increase the sales for
3M and hence 3M can have its market into the emerging countries like Korea and India.
Due to the risk, and high failure cost associated with introducing change in the organization, Rita and
her team should not put forward the fourth recommendation of infection prevention. More time should
be given to the fourth recommendation, and eventually Rita would also be able demonstrate the
importance of Lead User Approach to the new division manager, Dunlop.
Findings and Recommendations Rita and her team have taken a bold move in shifting from Traditional Market Research Methods to a
new method – “Lead User Approach”. Though, as a group we feel that they can still continue with the
traditional method of research, but at the same time should move on to other approaches also. Other
Recommendations from the group are –
1. Product Developers should be a part of the team, as they know about the technicalities of the
product or service, and they are more familiar with the technologies, trends, and the
businesses in the market.
2. Management could be convinced to invest more in the R&D Activities, as more R&D would
lead to more innovation, and hence more benefit to the Company. Also, doing the Cost-
Benefit Analysis, the Benefits associated are more as compared to the Cost associated in
using Lead User Approach.
3. As far as, the product ideas are concerned, three ideas should be implemented by 3M, but for
the fourth one “infection prevention”, more research and study should be done before launch.
Conclusion 3M, or the Minnesota, Mining and Manufacturing Company is known for Innovation, as it has given
to the world products like masking tape, waterproof sandpaper etc.. 3M Corporation entered into
HealthCare Sector in the year 1961, which was a core unit of the Company. Though the HealthCare
12 | P a g e
Unit was making Profits, no new product or no new innovation was done for more than a decade in
the area, which was a deviation from the Company’s Objective of having 30% sales originating from
new product areas.
The Company followed a new approach to find new product ideas – “Lead User Approach”.
The ultimate goal was to find leading-edge customer needs; develop concepts for
breakthrough products and innovation; and implement a customer focused product
development process.
“Lead User Approach” has its own benefits as it fosters strong commitment and relationships
among cross-functional teams, lead users, and a variety of experts. It also allowed 3M to have
intellectual property rights over the processes, which proved to be a core advantage for the
company.
3M faced difficulty in changing from Traditional Marketing Research Methods to a new
“Lead User Approach”, but that proved to be fruitful for the Company. As a group, we feel
that, at the time being, 3M should not discard the Traditional Approach completely, because
“Lead User Approach” still needs time and more analysis for it to be implemented over a
wider scale.