Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
ab29 September 2020Chief Investment Office GWMInvestment Research
Asia industrial tracker
Recovering from COVID-19
Contents
Asia industrial tracker This report has been prepared by UBS AG Singapore Branch and UBS AG Hong Kong Branch and UBS Securities Japan Co. Ltd. Please see the important disclaimer at the end of the document. Past performance is not an indica-tion of future returns.
Editor in Chief Dominic Schinder
Authors Philip Wyatt Yifan Hu Daiju Aoki Kathy Li Valerie Chan Delwin Kurnia Limas
Project manager Sita Chavali
Editor Aaron Kreuscher
CIO Content Design Michael Galliker Sunil Vedangi*
Contact [email protected]
* An employee of Cognizant Group. Cognizant staff provides support services to UBS.
Find out more: www.ubs.com/cio
03 Editorial
04 Key takeaways 04 Asia at a glance 06 Focus: ASEAN catch-up opportunity
09 Key indicators 09 Direction 10 Rank 11 Sector
14 Regional economies
14 China 16 Japan 18 Korea 20 Taiwan 22 Singapore 24 Malaysia 26 Indonesia 28 Thailand 30 Philippines 32 India
34 Methodology
Asia industrial tracker
UBS CIO GWM September 2020 3
Dear Reader,
Where is Asia in its industrial cycle?The answer to this question is an important determinant for investors and forms a crucial component in our asset allocation framework.
By employing our proprietary framework, we can ascertain where the region is overall as well as where each economy and specific industry are heading in their respective cycles. This publication arms investors with such insights and provides guidance on where we see opportunities based on this information.
Asia is a vibrant global manufacturing hub, so industrial manufacturing production is a key barometer of income generation and prosperity. While industrial activity in the region and globally was shattered by COVID-19 and the attendant lockdowns, regional industrial growth is pointing higher—but so far the recovery has been uneven.
China, the region‘s economic growth engine, is most advanced in the recovery, which should feed through to the rest of the region as part of its supply chain or through industrial relocation trends. But with the economic recovery broadening globally and in Asia, Southeast Asia (ASEAN) is set to rebound and catch up with its northern peers.
This turnaround gives investors the opportunity to take on thematic equity exposure to ASEAN, an attractively valued laggard which we think has solid earnings growth potential.
We hope you find this report and the insights useful for your business and when discussing your investment positions. As always, we welcome feedback and any questions you may have.
Editorial
Min Lan Tan Chief Investment Officer APAC UBS Global Wealth Management
Asia industrial tracker
4 UBS CIO GWM September 2020
The COVID-19 pandemic caused a very sharp quarterly economic growth drop for China in 1Q and Asia in 2Q. We expect a V-shaped recovery to mid-single-digit growth in 2H, given enormous policy support and global orders revival, beginning in July. In particular, we think ASEAN is set to turn around and catch up with its northern counterparts.
DirectionManufacturing production in Asia is reviving—it’s around halfway back to trend growth—after the sharp virus-induced slump in 2Q. But economies are at very different stages.
Economy Rank * Direction Sector **
Mainland China Tech, Transport
TaiwanTech, Basic
materials
Korea Tech, Machinery
SingaporeTech, Light
manufacturing
Japan Tech, Light
manufacturing
Malaysia Machinery, Tech
Indonesia Chemicals, Light
manufacturing
ThailandTech, Basic
materials
Philippines Chemicals, Energy
India Energy, Chemicals
RankManufacturing production in China is growing above trend and almost almost halfway to a typical peak. ASEAN and India are currently lagging, but we expect them to catch-up quickly in the coming two quarters.
SectorThe tech sector has accelerated during the pandemic back to its 5-year trend, with light manufacturing (incl. pharma products) and machinery starting to recover more in late 2Q. China’s capex plans and the global recovery should lift capital goods demand further. Auto production is weak, but auto demand post-Covid bears watching.
Singapore
43%IT’s share of manufacturing production. IT has softened due to the global slowdown, but bio and pharma are cushioning the blow.
India
29%Basic materials’ share of manufacturing production—it’s down >40% y/y this year. Light manufacturing and chemicals are in the early stage of a sequential rebound.
Key indicators
*range 1-5
**leading sector
Key takeaways
Asia at a glance
Asia industrial tracker
UBS CIO GWM September 2020 5
Philippines
32%Light manufacturing’s (mostly food & beverage) percentage of production—it’s down 31% y/y. Basic materials’ recovery has been very slow (12% weight). Sequential recovery hit by restrictions.
Taiwan
42%IT’s share of manufacturing production. IT is still growing over 20% y/y, a high not seen since 2017.
Japan
16%Transport sector’s share of manufacturing—it’s down 47% y/y this year, ranking as Japan’s worst-hit sector. Other sectors near decade lows. Inventories are much lower.
Korea
26%IT’s share of manufacturing production. IT has weak-ened due to the global slowdown, but it remains at trend; autos have been worse hit.
China
35%The combined share of production from IT, machinery and transport (autos)—all are above trend growth. Basic materials is also back to trend.
Malaysia
32%The combined share of pro-duction from IT, machinery and transport—all are re-bounding sharply. Pharma and other light manufactur-ing have also bounced.
Thailand
18%Transport sector’s share of manufacturing— it’s down >60% y/y this year, ranking as Thailand’s worst-hit sector. Chemicals (21% share) is also near decade lows, but inven-tory levels have fallen.
Indonesia
49%Light manufacturing’s (mostly food & beverage) percentage of production—it’s halfway way back to trend. Chemicals (11% weight) is above trend.
Asia industrial tracker
6 UBS CIO GWM September 2020
Asia industrial tracker
Relative performance favors ASEAN
110
90
70
130
150
170
Source: Bloomberg, UBS, as of September 2020
20192018 20202016 20172013 2014 2015201220112010
MSCI ASEAN Index
MSCI APAC Index
Spot performance, values standardized to100
Focus
ASEAN catch-up opportunity
ASEAN economic revival ahead Southeast Asia’s nascent growth revival calls for greater risk-taking in ASEAN (Singapore, Malaysia, Thailand, Indo-nesia, Philippines) equities, in our view. While ASEAN’s eco-nomic recovery is at least one quarter behind China’s, we expect economic activity to rebound in the quarters ahead, as signaled by our Asian industrial tracker framework (see Direction Indicators on pages 22, 24, 26, 28, 30). Leading indicators, like PMIs and accelerating money growth, sug-gest a firm activity upturn is ahead. They are also signaling the start of a new business cycle, which should lift indust-rial production and corporate earnings.
Equity value emerging, ready your riskThe ASEAN equity market has yet to recover fully from COVID-19. The pandemic, with its impact on financials, industrials, consumer discretionary and tourism-related industries, has led to an almost 20% underperformance of ASEAN versus the region since late March. But as earnings gradually improve quarter by quarter, we see an opportunity for investors to take on greater exposure to Southeast Asian markets. This view is based on our forecast for ASEAN ear-nings to rebound almost 20% in 2021 after contracting 30% in 2020. We think the opportunity in ASEAN equities is similar to that of earlier economic recoveries like after the dot-com bust in 2001, after the global financial crisis in 2010 and after the regional recovery in 2017.
MSCI ASEAN equity weights
♦ Singapore – 28.2%♦ Malaysia – 21.7%♦ Thailand – 23.7%♦ Indonesia –17.6%♦ Philippines – 8.8%
UBS CIO GWM September 2020 7
Asia industrial tracker
53
33
43
CIO estimate
38
48
2013 2017 20192015 2021-40
-30
10
0
-10
-20
20
Company earnings turnaround ahead
Source: Bloomberg, UBS, as of September 2020
Lead indicators bouncing back
ASEAN PMI (50=Neutral, monthly)
ASEAN annual earnings growth (% yoy, RHS)
ASEAN lowers risk with diversity
10
0
20
30
40
Source: JP Morgan, Bloomberg, UBS, as of September 2020
PH ID ASEANTHMYSG
30-day volatility
Current
10-year average of ASEAN 30-day volatility
ASEAN’s dividend yield on par with JACI IG’s yield
3.0
2.5
3.5
4.5
4.0
5.0
5.5
Source: Bloomberg, UBS, as of September 2020.
2019 2020201820172016
MSCI ASEAN Dividend Est
JACI IG YTM
In %
New post-Covid ASEAN equities total return story With this earnings growth story in mind, and the region’s price-to-book discount versus the broader Asia ex-Japan region at a 12-year low (15% discount vs. 6% premium at the start of the year), we think broad-based long positions in ASEAN equities provide investors an attractive risk-reward profile. We anticipate price returns of around 10% over a 6–12-month investment horizon and volatility of around 12%. Our price return target is driven by a
combination of our outlook for a steady sequential (q/q) earnings recovery and our expectation for a mid-single-digit valuation re-rating, which would bring MSCI ASEAN’s price-to-earnings ratio closer to the top range of its historical long-term valuation level. If we then add our expected 3% p.a. dividend yield to the return equation, ASEAN in our view becomes a good opportunity to position for the next stage of Asia’s economic recovery.
“With a 3% dividend yield, ASEAN becomes a good opportunity to position for the next stage of Asia’s economic recovery.”
8 UBS CIO GWM September 2020
Asia industrial tracker
Notation
How to read the chartsMajor industry sectors are defined in line with most national data standards
IT (Tech): All technology hardware segments such as com-puters, communications, optical, and other electronic equipment and components.
Transport (Autos): All motor vehicles, trailers, auto parts and other equipment.
Machinery: Machinery equipment, electrical equipment, general and special equipment.
Chemicals (Chems): All chemical material, rubber and pla-stic products.
Basic materials: Basic metals and alloys, fabricated metal products (except machinery), non-metallic mineral products and construction materials.
Energy: Coke, coal and lignite fuel briquettes; refined petroleum products; and nuclear fuels, electricity and gas.
Light manufacturing (Light mfg): All agricultural, food and beverage products; tobacco goods, wearing apparel, textiles, leather products, wood and paper, furniture, prin-ting and reproduction of recorded media, pharmaceutical and biological products (except Indonesia) cultural, educatio-nal, arts and crafts goods, sports and recreational products.
In the charts, these sectors are further grouped into three general categories: capital goods (IT, transport and machi-nery), intermediate goods (chemicals, basic materials and energy) and light manufacturing (finished consumer goods ex-IT/autos).
All charts/data in this report are as of June/July 2020, unless stated otherwise.A typical Direction indicator chart
-30
-20
-10
0
10
20
30
Source: CEIC
2018 20202016201420122010
Manufacturing growth, 3mma Next 2 stops
Global orders index
In %
A typical Direction indicator chart
-30
-20
-10
0
10
20
30
Source: CEIC
2018 20202016201420122010
Manufacturing growth, 3mma Next 2 stops
Global orders index
In %
Please see p34 for details on how to read the chart.
UBS CIO GWM September 2020 9
Key takeaways
• Recovery in progress – Manufacturing produc-tion in Asia is climbing (around halfway) back to trend growth, after the sharp virus-induced slump in 2Q, but the economies are in different stages.
• A brisk revival is expected due to the lack of big capex, excess capacity and inventory overhangs.
• Global support – Global order trends should support stronger production in 2H.
• Next stop – Asia may peak in 2H then plateau as China levels off and the rest of the region returns to trend.
How to read the Covid shock? The COVID-19 pandemic caused a very sharp quarterly drop for China in 1Q and Asia in 2Q. Big stimulus plus a desynchronized impact meant only minor inventory and capex overhangs. We expect a V-shaped production recovery in 2H, given enormous policy support and global orders revival, beginning in July.
Direction
The post-Covid 2Hrebound
Direction
Industrial production relative to trend
Source: CEIC, UBS
MY, PH, TH, ID, IN, JP
Halfway < trend
Halfway > trend
Trend IP growth
SG, KR
CH, TW
Asia Direction indicator – now past the bottom
-8-6
20
-2-4
12
64
810
Source: CEIC
2018 20202016201420122010
Asia manufacturing production growth Next stop
In %
Asia’s manufacturing production is reviving in 2H
Asia industrial tracker
10 UBS CIO GWM September 2020
China and North Asia in the lead, but Singapore and Malaysia to catch up
Rank
Watching out for ASEAN catch-up
Key takeaways
• Leading economies – Mainland China and North Asia manufacturing production growth is above trend, almost halfway to the typical peak. Taiwan slid slightly in 2Q.
• Middle cluster – Korea and Singapore slightly ahead of the rest of Asia which plunged in 2Q and remains sub-trend.
• Lagging economies – SE Asia (ex-Singapore), India and Japan slid twice as much in 2Q than in a typical slump.
• ASEAN catch-up – In 2H, we expect production to lift in the smaller open economies as trade revives (starting with Singapore). India’s micro-economic indicators are also rising despite high infection rates.
How the Covid impact differs? Trade linkages to China and the tech sector have been differentiating factors, helping North Asia and Singapore. The virus-induced slump has not just hit small open economies. It has had a deeply negative impact on manufacturing production in the large domestic-driven economies (India, Indonesia, the Philippines) due to shutdowns.
100
0
-100
200
-300
-200
Manufacturing production deviation from trend
Note: 0 = trend growth, 100 = 1x z-score, 200 = 2x z-scoreSource: CEIC
Z-score distance from peak or trough
IDINTHCH TW KR SG PH MY JP
March June
Industrialboom
Industrialslump
Leading economiesLagging economies
KR
SG
CH
Rank
Asia industrial tracker
UBS CIO GWM September 2020 11
Sector
Tech sector support overshadows general collapse
0
-4
-8
8
4
-16
-12
Upturn ahead for capital goods
Source: CEIC
In %
Chem-icals
Tech Lightmfg
Energy Mach-inery
Basicmaterials
Trspt Total
Industrialboom
Industrialslump
Latest % growth (3mma) 3 months ago 5-year average
Key takeaways
• Tech cushion – The tech sector has accelerated during the pandemic back to its 5yr trend, aid-ing economies with heavy share of tech.
• Laggard sectors – Transport (mainly autos), as a premier consumer discretionary segment, has been hit the worst, followed by chemicals dur-ing the oil price plunge.
• Rapid improvers – Light manufacturing (e.g., pharma products), machinery and equipment sectors have been fastest to recover since June. China’s capex recovery should boost capital goods (machinery, autos and tech).
Which sectors has Covid impacted the most? The technology sector has held up best, with Taiwan and Sin-gapore avoiding a dip alto-gether. A temporary divergence occurred as sectors in mainland China recovered in 2Q but sank to multi-year lows elsewhere in Asia. Across most markets, two sectors—light manufacturing (pharma and medical related) and machinery & equipment—have fared relatively well.
Industry sub-sectors, by share
Source: CEIC
IT
Autos Chemicals
Light mfg
Basic materialsMachinery & eqpmt
Energy
PH
TW
KR
MY
TH
CH
JP
ID
IN
SG
Capital goods Intermediates Light mfg
0.2 0.6 0.80.0 1.00.4
Watching for non-tech turnaround
Sector
Asia industrial tracker
Where is the journey heading?
Regional economies
14 UBS CIO GWM September 2020
Asia industrial tracker
ChinaChina has already rebounded from Covid and has room for broader recovery.
Where is China in its industrial produc-tion cycle and where to next?
• Direction – Production in China displayed sharp V shape from 1Q (contraction) to 2Q (rebound). We expect it to peak higher in 2H on stronger investment.
• Sector ranking – IT, transport (mainly autos), machinery sectors well above trend, while inter-mediate products slightly below trend.
• Global orders correlate less well with China’s production due to its big domestic market. But stronger global demand helps.
What is the impact of COVID-19? China has led the region. In 1Q, it experienced a steep downspike in manufacturing production during the strict Covid lockdown. In 2Q, production rebounded as sharply, with local outbreaks of negligible impact. Generous stimulus and further investment impetus in 2H should support elevated production. Escalating Sino-US tensions have yet to impact tech-sector growth.
Current industrial production relative to 5-yr trend
Source: CEIC, UBS
Light mfg
Basic materials
Chemicals, Energy
Transport, Tech, Machinery
Trend growth
Heading above trend
-20
-10
0
10
20
30
Source: CEIC
2018 20202016201420122010
China manufacturing growth, 3mma Next stop
Global orders index
In %
Direction
UBS CIO GWM September 2020 15
China
A picture of general recovery to trendRank
Sector
Contribution to manufacturing production
-9
-6
-3
0
3
6
9
Source: CEIC
2019 20202018201720162015
Manufacturing production index (wtd % contr)
%YoY, 3mma
Light manufacturing goods
Intermediate goods
Capital goods
Growth in capital goods
-30
-20
-10
0
10
20
Source: CEIC
2019 20202018201720162015
Transport
Tech (IT)
Machinery and equipment
Capital goods
%YoY, 3mma
10
8
6
4
12
-2
0
2
China’s recovery gathering pace – half the sectorsabove trend
Source: CEIC
In %
EnergyTrspt Tech Machi-nery
Basic materials
Chemi-cals
Lightmfg
Total
Latest % growth
Industrialboom
Industrialslump
5-year average
Sector weights
♦ Tech – 11%♦ Machinery – 17%♦ Energy – 10%♦ Basic materials – 20%♦ Light mfg – 24%♦ Chemicals – 11%♦ Transport – 7%
• Capital goods sector – IT, machinery and transport (35% of overall mfg. production) have rebounded in step and are growing above trend, in our view. Global recovery and faster investment should offer extra lift in 2H.
• Inventories are stabilizing and manufacturing sales are rising again after the collapse in 1Q, supporting production. Producer prices are
strengthening but still negative in y/y percentage terms.
• Intermediate sectors – Basic materials is back to trend and should rise further on infrastructure investment expansion, further supporting upstream commodity prices. Chemicals/plastics and energy have rebounded but are below trend. Light manufacturing is well below trend.
Asia industrial tracker
16 UBS CIO GWM September 2020
JapanCovid produced a severe 2Q slump that crushed the autos sector.
Where is Japan in its industrial produc-tion cycle and where to next?
• Direction – Production in Japan is in a major slump—at its worst point since 2009. We expect a rebound in 2H.
• Sector ranking – The auto sector has borne the most pressure, but bears watching in a post-Covid world. All other sectors are at decade lows.
• Global orders signal recovery and correlate moderately to Japan’s production. Domestic machinery orders and capital goods shipments starting to bottom out.
What is the impact of COVID-19? The Covid-induced slump turned a soft patch into a major contraction despite Japan’s relatively low infection rates. The recovery underway in China and globally should help restore manufacturing production back to its (regionally slow) trend
Current industrial production relative to 5-yr trend
Source: CEIC, UBS
Transport, Light mfg, Chemicals, Energy, Tech,Machinery, Basic materials
Trend growth
From bad to worse in 2Q, looking for a path back up
-20
-10
0
10
20
30
Source: CEIC
2018 20202016201420122010
Japan manufacturing growth, 3mma Next 2 stops
Global orders index
In %
Direction
UBS CIO GWM September 2020 17
Japan
A bleak 2Q picture for capital goods productionRank
Sector
Contribution to manufacturing production
-25
-20
-15
-10
-5
0
5
Source: CEIC
2019 20202018201720162015
Manufacturing production index (wtd % contr)
%YoY, 3mma
Light manufacturing goods
Intermediate goods
Capital goods
Growth in capital goods
-50
-40
-30
-20
-10
0
10
Source: CEIC
2019 20202018201720162015
Transport
Tech (IT)
Machinery and equipment
Capital goods
%YoY, 3mma
0
-10
-20
-30
10
-50
-40
Transport the main drag, but better shipmentssuggest turnaround
Source: CEIC
In %
Machi-nery
Tech Lightmfg
Energy Basic materials
Chemi-cals
Trspt Total
Latest % growth
Industrialboom
Industrialslump
5-year average
Sector weights
♦ Tech – 8%♦ Machinery – 22%♦ Energy – 4%♦ Basic materials – 17%♦ Light mfg – 24%♦ Chemicals – 10%♦ Transport – 16%
• Capital goods sector (46% of overall mfg. production) contracted 26% y/y in 2Q, led by autos (16% weight), which contracted 47%. Recovery in China should help. Modest shipment recovery starting in semiconductors, displays and transport equipment.
• Inventories fell sharply 2Q, particularly in autos and some IT products. As shipments recover, a
rebound in capital goods production should follow suit. Producer pricing is stable.
• Intermediate goods (basic materials, energy, chemicals and plastics) are also clustered together and down 25%. Light manufacturing has been less impacted.
Asia industrial tracker
18 UBS CIO GWM September 2020
KoreaCovid produced a moderate 2Q slump in Korea due to the tech cushion.
Where is Korea in its industrial produc-tion cycle and where to next?
• Direction – Production in Korea sank below trend in 2Q, a moderate dip. We expect it to return to trend in 2H.
• Sector ranking – The IT/tech sector is above trend but past the 1Q peak. All other sectors are below trend and close to the trough.
• Global orders correlate well with Korea’s pro-duction. Stronger global (and China) recovery would likely lift Korean production to trend.
What is the impact of COVID-19? The Covid-induced slump interrupted a technology-sector-led recovery in production and investment, following a weak period through 2018–2019. We expect the recovery to resume from 2H onwards with help from the Korean government’s New Deal incentives for 5G and re-onshoring tax incentives.
Current industrial production relative to 5-yr trend
Source: CEIC, UBS
Chemicals, Basic materials,Energy, Autos
Trend growth
Light mfg
Tech
Heading back to trend in 2H
-20
-10
0
10
20
30
Source: CEIC
2018 20202016201420122010
Korea manufacturing growth, 3mma Next 2 stops
Global orders index
In %
Direction
UBS CIO GWM September 2020 19
Korea
A mixed picture beneath the surface of capital goods productionRank
Sector
Contribution to manufacturing production
-6
-4
-2
0
2
4
6
8
Source: CEIC
2019 20202018201720162015
Manufacturing production index (wtd % contr)
%YoY, 3mma
Light manufacturing goods
Intermediate goods
Capital goods
Growth in capital goods
-20
-10
0
10
20
30
Source: CEIC
2019 20202018201720162015
Transport
Tech (IT)
Machinery
Capital goods
%YoY, 3mma
5
0
-5
-10
10
-20
-15
Many Korean industry sectors slowed in 1H butshould recover in 2H
Source: CEIC
In %
Chemi-cals
Tech Machi-nery
Energy Basic materials
Lightmfg
Trspt Total
Latest % growth
Industrialboom
Industrialslump
5-year average
Sector weights
♦ Tech – 26%♦ Machinery – 8%♦ Energy – 9%♦ Basic materials – 27%♦ Light mfg – 10%♦ Chemicals – 10%♦ Transport – 9%
• Globally-induced correction hit Korea’s capital goods sector in 2Q. The tech sector (26% share of overall mfg. production) just past its 1Q peak and is now back to trend.
• Inventories across industries rose through 2Q but are peaking out now and shipment/inventory ratios are rising again—a typical prelude to production recovery. Producer pricing is stabilizing.
• Lagging sectors: Autos (9% industrial share) extended its contraction in 2Q, but auto demand may expand independently in a post-Covid world. Light manufacturing (10%) should turn up as domestic consumption responds to stimulus. The machinery & equipment (8%) sector should ride on the expansion of Chinese investment.
Asia industrial tracker
20 UBS CIO GWM September 2020
TaiwanCovid’s impact was very minor due to strong containment and the tech cushion.
Where is Taiwan in its industrial produc-tion cycle and where to next?
• Direction – Taiwan production dipped but remained above trend in 2Q. We expect it to return to trend in 2H.
• Sector ranking – The IT/tech sector is at a peak not seen since 2017, fed by a 5G/AI component boom. Basic materials and machinery are just sub-trend.
• Global orders correlate well with Taiwan’s pro-duction. Stronger global (and mainland China) recovery should keep production up in 2H.
What is the impact of COVID-19? The Covid-induced slump presented only a minor dip to manufacturing production in 2Q, because the rebound in mainland China and its focus on 5G have been a major support for Taiwan. In addition, local investment has been supported by ongoing re-shoring of certain industries away from mainland China. This supports the local economy.
Current industrial production relative to 5-yr trend
Source: CEIC, UBS
Chemical, Energy, Light mfg, Transport
Machinery, Basic materials
Tech
Trend growth
Staying above trend in 2H
-20
-10
0
10
20
30
Source: CEIC
2018 20202016201420122010
Taiwan manufacturing growth, 3mma Next 2 stops
Global orders index
In %
Direction
UBS CIO GWM September 2020 21
Taiwan
A huge skew toward tech in capital goods productionRank
Sector
Contribution to manufacturing production
-10
0
10
20
Source: CEIC
20202018201620142012
Manufacturing production index (wtd % contr)
%YoY, 3mma
Light manufacturing goods
Intermediate goods
Capital goods
Growth in capital goods
-20
-10
0
10
20
30
Source: CEIC
2019 20202018201720162015
Transport
Tech (IT)
Machinery
Capital goods
%YoY, 3mma
10
15
5
20
0
-5
-10
25
-20
-15
Taiwan tech expansion continues
Source: CEIC
In %
EnergyTech Basic materials
Chemi-cals
Machi-nery
Lightmfg
Trspt Total
Latest % growth
Industrialboom
Industrialslump
5-year average
Sector weights
♦ Tech – 42%♦ Machinery – 7%♦ Energy – 7%♦ Basic materials – 19%♦ Light mfg – 11%♦ Chemicals – 9%♦ Transport – 4%
• Strong capital goods – The dominant tech sector is close to historical peak growth (42% of mfg. production), in our view, and was barely affected by the global pandemic correction in 2Q. Machinery (7%) is soft but just sub-trend.
• Inventories rose – Shipment/inventory ratios declined in 2Q, which suggests an inventory build is possible amid Sino-US tensions. July
export orders jumped recently. Producer pricing is firm.
• Weaker sectors – Basic materials (19%) is soft but just sub-trend, perhaps benefitting from re-onshoring and China demand. The others are close to the bottom and should recover in 2H, in our view.
Asia industrial tracker
22 UBS CIO GWM September 2020
SingaporeCovid had a minor impact on man-ufacturing in 2Q thanks to support from tech and bio-products.
Where is Singapore in its industrial pro-duction cycle and where to next?
• Direction – Singapore production sank just below trend in 2Q, a moderate dip. We think it’s headed back above trend in 2H.
• Sector ranking – IT, light manufacturing and machinery sectors have supported manufactur-ing. Other sectors likely at the trough.
• Global orders correlate well with Singapore’s production. Stronger global (and China) recovery would likely lift production back to trend.
What is the impact of COVID-19? Singapore was heading out of a dip when Covid struck. There was a major impact for services, but only a minor interruption for manufacturing in 2Q. The pandemic also generated a spike in biological and pharma (light manufacturing) products in March and April, which has since unwound. We see a general rebound ahead.
Current industrial production relative to 5-yr trend
Source: CEIC, UBS
Machinery
Light mfg
Tech
Trend growth
Transport, Chemicals,Basic materials, Energy
Heading back above trend in 2H
-20
-10
0
10
20
30
Source: CEIC
2018 20202016201420122010
Singapore manufacturing growth, 3mma Next 2 stops
Global orders index
In %
Direction
UBS CIO GWM September 2020 23
Singapore
A mixed picture beneath the surface of capital goods productionRank
Sector
Contribution to manufacturing production
-10
0
10
20
Source: CEIC
202020192017 201820162015
Manufacturing production index (wtd % contr)
%YoY, 3mma
Light manufacturing goods
Intermediate goods
Capital goods
Growth in capital goods
-20
-30
-10
0
10
20
30
40
Source: CEIC
2019 20202018201720162015
Transport
Tech (IT)
Machinery
Capital goods
%YoY, 3mma
10
0
-10
-20
20
-40
-30
Recovery should broaden in 2H
Source: CEIC
In %
Basic materials
Tech Lightmfg
Machi-nery
Chem-icals
Energy Trspt Total
Latest % growth
Industrialboom
Industrialslump
5-year average
Sector weights
♦ Tech – 43%♦ Machinery – 11%♦ Energy – 1%♦ Basic materials – 3%♦ Light mfg – 23%♦ Chemicals – 12%♦ Transport – 6%
• Capital goods sector – IT (43% of mfg. produc-tion) corrected to below trend in 2Q, but machin-ery (10%) held up just above trend—both were a bit suppressed by the global slump in 2Q.
• Intermediate goods (basic materials, energy, chemicals and plastics) are also clustered
together at the trough, hit partly by the oil sector’s travails in 2Q.
• Light manufacturing sector (23%) has been boosted by the virus, as the biological and pharma product categories grew dramatically in March and April.
Asia industrial tracker
24 UBS CIO GWM September 2020
MalaysiaCovid produced a dramatic general slump in 2Q led by transport, energy, chemicals and basic materials.
Where is Malaysia in its industrial pro-duction cycle and where to next?
• Direction – Production in Malaysia sank below trend in 2Q, in a severe slump. It should bounce back to trend in 2H.
• Sector ranking – All below trend, but intermedi-ate goods hit the hardest. Capital goods and light manufacturing goods have bounced.
• Global orders provide some guide to Malaysia’s production. Stronger global (and China) recovery would boost production.
What is the impact of COVID-19? The Covid-induced slump hit Malaysia hard, particularly the intermediates sectors (energy, materials and chemicals/plastics). Capital goods (IT and machinery) and light machinery (biological goods) have been quick to show a bounce.
Current industrial production relative to 5-yr trend
Source: CEIC, UBS
Basic materials, Energy,Chemical, Transport
Trend growth
Light mfg, Tech, Machinery
Heading back to trend in 2H
-20
-10
0
10
20
30
Source: CEIC
2018 20202016201420122010
Malaysia manufacturing growth, 3mma Next 2 stops
Global orders index
In %
Direction
UBS CIO GWM September 2020 25
Malaysia
A big drop in 2Q, but starting to bounce Rank
Sector
Contribution to manufacturing production
-20
-15
-10
-5
0
5
10
Source: CEIC
2019 20202018201720162015
Manufacturing production index (wtd % contr)
%YoY, 3mma
Light manufacturing goods
Intermediate goods
Capital goods
Growth in capital goods
-20
-10
0
10
20
Source: CEIC
2019 20202018201720162015
Tech (IT)
Transport
Machinery
Capital goods
%YoY, 3mma
0
-10
-20
-30
10
-40
Malaysian industry is still struggling – recovery in 2H
Source: CEIC
In %
TrsptMachi-nery
Tech Lightmfg
Energy Chemi-cals
Basic materials
Total
Latest % growth
Industrialboom
Industrialslump
5-year average
Sector weights
♦ Tech – 19%♦ Machinery – 6%♦ Energy – 12%♦ Basic materials – 16%♦ Light mfg – 23%♦ Chemicals – 15%♦ Transport – 8%
• Capital goods sector – Weakness in 2Q mostly driven by transport sector. IT (19% of manufacturing. production) and machinery (6%) have bounced but remain weak.
• Intermediate goods, the dominant sector (basic materials, energy, chemicals and plastics
combined have 43% weight), collapsed on energy and oil weakness.
• Light manufacturing sector (23%) has bounced with pharma, food & beverage and other products helping at the margin.
Asia industrial tracker
26 UBS CIO GWM September 2020
IndonesiaCovid produced a broad slump in 2Q, driven by capital goods includ-ing transport.
Where is Indonesia in its industrial pro-duction cycle and where to next?
• Direction – Production in Indonesia sank below trend in 2Q.
• Sector ranking – Transport and capital goods suffered the most; chemicals and light manufac-turing the first to revive.
• Global orders do not correlate particularly well with Indonesia’s production.
What is the impact of COVID-19? The impact of Covid does not appear to have been as heavy on Indonesia as on other emerging market Asian econo-mies. Still, it experienced an industrial goods-led slump with light manufacturing (almost half of overall production) as a counterbalance. Indonesia may see a relatively slower recovery to trend in 2H given its higher reliance on domestic deman-dand still-high Covid infection rates.
Current industrial production relative to 5-yr trend
Source: CEIC, UBS
Tech, Machinery, Energy,Transport, Basic materials
Trend growth
Light mfg
Chemicals
High infections could mean delayed recovery in 2H
-20
-10
0
10
20
30
Source: CEIC
2018 20202016201420122010
Indonesia manufacturing growth, 3mma Next 2 stops
Global orders index
In %
Direction
UBS CIO GWM September 2020 27
Indonesia
Likely to be in very early stages of industrial turnaround
Sector
Rank
Contribution to manufacturing production
-5
0
5
10
Source: CEIC
202020192017 201820162015
Manufacturing production index (wtd % contr)
%YoY, 3mma
Light manufacturing goods
Intermediate goods
Capital goods
ID % growth of IP Intermediate, light mfg goods
-10
-15
-5
0
5
10
15
Source: CEIC
2019 20202018201720162015
Basic materials
Light mfg
Energy
Chemicals & plastics
%YoY, 3mma
5
0
-5
-10
-15
-20
10
-30
-25
Watching transport and light manufacturing sectors
Source: CEIC
In %
TechChem-icals
Lightmfg
Energy Basic materials
Machi-nery
Trspt Total
Latest % growth
Industrialboom
Industrialslump
5-year average
Sector weights
♦ Tech – 5%♦ Machinery – 7%♦ Energy – 11%♦ Basic materials – 8%♦ Light mfg – 49%♦ Chemicals – 11%♦ Transport – 8%
• Light manufacturing sector is the most important in Indonesia, accounting for nearly half of the economy’s overall manufacturing production, dominated by food & beverages and tobacco (30%). It also has the highest trend growth rate.
• Intermediate goods – Chemicals (12%)—which includes pharma products—has has done
relatively well and is growing above trend. Basic materials (7%) is also a key cyclical sector which should rise alongside global trends in 2H and respond to any lift in construction.
• Capital goods sector is driven by swings in transport (8%) which, while very weak, should respond to higher spending on autos post-Covid;
Asia industrial tracker
28 UBS CIO GWM September 2020
ThailandCovid produced a severe 2Q slump that crushed its auto sector. The post-Covid auto recovery bears watch ing.
Where is Thailand in its industrial pro-duction cycle and where to next?
• Direction – Production in Thailand sank below trend in 2Q, in a deep dip. We expect it to turn around in 2H.
• Sector ranking – All below trend, but capital goods, led by autos, hit the hardest. Turnaround not yet visible.
• Global orders – Provide occasional guide to Thailand’s production. Stronger global (and China) recovery would boost production.
What is the impact of COVID-19? The Covid-induced slump has hit Thailand hard. Aside from the tourism sector, manufactur-ing production has also been hammered and is taking longer than its neighbors to turn around. Like Japan, autos have been hit the hardest, but post-Covid auto demand should recover as people travel more domestically. Thailand’s tech sector is closer to trend.
Current industrial production relative to 5-yr trend
Source: CEIC, UBS
Basic materials, Energy,Chemical, Transport
Trend growth
Light mfg, Tech, Machinery
Heading back to trend in 2H
-30
-15
0
15
30
45
Source: CEIC
2018 20202016201420122010
Thailand manufacturing growth, 3mma Next 2 stops
Global orders index
In %
Direction
UBS CIO GWM September 2020 29
Thailand
A bleak 2Q picture for capital goods production
Sector
Contribution to manufacturing production
-25
-20
-15
-10
-5
0
5
Source: CEIC
2019 20202018201720162015
Manufacturing production index (wtd % contr)
%YoY, 3mma
Light manufacturing goods
Intermediate goods
Capital goods
Growth in capital goods
-20
-30
-40
-50
-10
0
10
20
Source: CEIC
2019 20202018201720162015
Transport
Tech (IT)
Machinery
Capital goods
%YoY, 3mma
-10
0
-20
-30
-40
-50
-60
-70
10
-80
Thailand industry is still struggling – recovery in 2H
Source: CEIC
In %
Machi-nery
Tech Basic materials
Chemi-cals
Lightmfg
Energy Trspt Total
Latest % growth
Industrialboom
Industrialslump
5-year average
Sector weights
♦ Tech – 11%♦ Machinery – 8%♦ Energy – 3%♦ Basic materials – 10%♦ Light mfg – 29%♦ Chemicals – 21%♦ Transport – 18%
• Capital goods sector – Autos, as a big component (18% of manufacturing. production), has suffered the most, contracting almost 70% amid the global slump in 2Q. In contrast, tech products (11%) saw a moderate dip.
• Intermediate and light manufactured goods – Chemicals, which dominates intermediate goods
(21% share), remains close to the trough, in our view, hit partly by the oil sector’s travails in 2Q.
• Inventories – Overall inventories fell around 11% through 2Q and shipments started to turn in June. So we think a revival in manufacturing should begin in 2H alongside recovering global demand.
Rank
Asia industrial tracker
30 UBS CIO GWM September 2020
PhilippinesCovid produced a severe broad-based slump in 2Q.
Where is the Philippines in its industrial production cycle and where to next?
• Direction – Production in the Philippines sank below trend in 2Q, in a moderate dip. We expect it to return to trend in 2H.
• Sector ranking – Most sectors have seen the worst drops in almost a decade; chemicals and plastics have been the least bad.
• Global orders correlate reasonably well with Phil-ippine production. Stronger global recovery would boost production back to trend, in our view.
What is the impact of COVID-19? The Covid-induced slump hit most Philippine sectors hard due to the strict shutdowns in 2Q. The domestic components of light manufacturing may take longer to rekindle given high infection rates and extended lockdowns. Global-linked industries should recover earlier.
Current industrial production relative to 5-yr trend
Source: CEIC, UBS
Trend growth
Machinery, Energy, Basic materials,Chemicals, Autos, Light mfg
High infections could mean delayed recovery in 2H
-30
-20
-10
0
10
20
30
Source: CEIC
2018 20202016201420122010
Philippines manufacturing growth, 3mma Next 2 stops
Global orders index
In %
Direction
UBS CIO GWM September 2020 31
Philippines
Production generally hard hit by the strict shutdownsRank
Sector
Contribution to manufacturing production
-40
-30
-20
-10
0
10
20
Source: CEIC
2019 20202018201720162015
Manufacturing production index (wtd % contr)
%YoY, 3mma
Light manufacturing goods
Intermediate goods
Capital goods
PH % growth of Intermediate, light mfg goods
-40
-50
-10
-20
-30
0
10
20
30
40
Source: CEIC
2019 20202018201720162015
Energy
Basic materials
Light mfg
Chemicals & plastics
%YoY, 3mma
-10
0
10
-20
-30
-40
-50
-60
-70
20
-80
Philippine industry is weak, but should recover in 2H
Source: CEIC
In %
Machi-neryl
Chemi-cals
Energy Lightmfg
Basic materials
Trspt Total
Latest % growth
Industrialboom
Industrialslump
5-year average
Sector weights
♦ Tech – 0%♦ Machinery – 25%♦ Energy – 15%♦ Basic materials – 12%♦ Light mfg – 32%♦ Chemicals – 7%♦ Transport – 9%
• Capital goods sector – Massive drop in trans-port and machinery/electrical equipment sectors (9% and 25% of overall mfg. production, respectively).
• Intermediate goods – Steep drops in basic materials and energy (27%) as domestic con-
struction collapsed amid shutdowns. Chemicals and plastics sectors hit the least.
• Light manufacturing sector (32%) also very hard hit, down over 30%.
Asia industrial tracker
32 UBS CIO GWM September 2020
IndiaLooking up from deep collapse in 2Q production.
Where is India in its industrial production cycle and where to next?
• Direction – India’s production sank to multi-decade lows in 2Q but bounced in June.
• Sector ranking – Most sectors close to trough, in our view, but light manufacturing and chemi-cals are recovering.
• Global orders guide for moderate support for production.
What is the impact of COVID-19? The Covid-induced impact on India was deep in 2Q, with April the worst month. The shutdowns meant a lot of migrant labor returned home, resulting in a production lag in re-opening. Another obstacle is the continued high infection rate. This could mean a slightly more delayed return to trend growth for production relative to the region.
Current industrial production relative to 5 yr trend
Source: CEIC, UBS
Machinery, Transport, Machinery,Tech, Energy, Basic materials
Trend growth
Chemicals, Light mfg
High infections could mean delayed recovery in 2H
-40
-30
-20
-10
0
10
20
30
Source: CEIC
2018 20202016201420122010
India manufacturing growth, 3mma Next 2 stops
Global orders index
In %
Direction
UBS CIO GWM September 2020 33
India
Watching for rebound in light manufactured goods, chemicals and autosRank
Sector
Contribution to manufacturing production
-50
-40
-30
-20
-10
0
10
Source: CEIC
2019 20202018201720162015
Manufacturing production index (wtd % contr)
%YoY, 3mma
Light manufacturing goods
Intermediate goods
Capital goods
Growth in capital goods
-20
-30
-40
-10
0
10
20
Source: CEIC
2019 20202018201720162015
Chemicals & plastics
Intermediate goods
Energy
Light mfg
%YoY, 3mma
-10
0
-20
-30
-40
-50
-60
-70
10
-80
At the trough – intermediate and lightmanufacturing products should recover in 2H
Source: CEIC
In %
TechEnergy Chemi-cals
Lightmfg
Basic materials
Machi-nery
Trspt Total
Latest % growth
Industrialboom
Industrialslump
5-year average
Sector weights
♦ Tech – 2%♦ Machinery – 10%♦ Energy – 17%♦ Basic materials – 29%♦ Light mfg – 24%♦ Chemicals – 13%♦ Transport – 5%
• Capital goods sector is still small in India (17% of overall mfg. production). Transportation should bounce back quickly once confidence returns later in 2H, given the consumer link and low cost of funds.
• Intermediate goods (60%) and light manu-facturing (24%) are the biggest components.
We saw early sequential improvement in the lat-ter, particularly pharma (7%), and chemicals/plastics (13%) in 2Q.
34 UBS CIO GWM September 2020
Asia industrial tracker
There are three basic chart types: direction, rank and sector indicators.
The direction indicator and the rank indicators rely on the same basic stylized cycle analysis. The direction indica-tor shows the year-on-year growth rate of the actual manu-facturing production index, and provides guidance for the next two possible cyclical positions (the next “one or two stops”). We use a 3-month average to smooth minor spikes and allow for a more quarterly assessment. This is shown alongside our diffusion index for global order activity, expressed in year-on-year growth.
On the direction indicator page, there is also a sine wave summarizing the latest location of manufacturing produc-tion growth in different Asian economies.
To obtain a fix on the cyclical position, a given economy’s manufacturing production growth is assigned a time length (peak to peak is typically 2–3 years) and Z-scores are calcu-lated with production growth since 2010. Using the aver-age peaks and troughs, the scale of a typical boom-and-slump trend (adjusted for historical drift) is established. A stylized cycle is divided into eight segments bordered by a peak, trough, trend and four halfway points. Recent values of production growth are then placed in a position accor-
ding to the Z-score distance from the historical trend and peak. In the direction indicator chart, the next two stops represent the successive two locations, assuming manu-facturing growth progresses through such a stylized cycle. For example, if an economy›s production today grows close to trend and is in an environment of rising global order activity, then the next stop would be halfway above trend and the one after that a peak.
The rank indicator chart shows the speed of production expansion. The recent datapoint and that of three months ago are shown as a percentage of the Z-score distance from a typical peak or trough. For example, 100% or more would signify an economy’s production growth as being at a typical business boom, while close to zero means produc-tion growth is running at its trend rate (adjusted for histori-cal drift).
The sector indicator chart simply shows the 3-month average of the recent growth rate for individual industry sectors (as defined above) versus that three months ago, also versus a five-year average. The same format is used in the economy pages. The individual economy pages also display this information on a stylized sine wave where the trend is taken as the five-year average growth rate and the current position shown versus the last peak and trough.
Cyclical methodology
How to read the charts
UBS CIO GWM September 2020 35
UBS Chief Investment Office›s («CIO») investment views are prepared and published by the Global Wealth Management business of UBS Switzerland AG (regulated by FINMA in Switzerland) or its affiliates («UBS»).The investment views have been prepared in accordance with legal requirements designed to promote the independence of investment research.
Generic investment research – Risk information:This publication is for your information only and is not intended as an offer, or a solicitation of an offer, to buy or sell any invest-ment or other specific product. The analysis contained herein does not constitute a personal recommendation or take into account the particular investment objectives, investment strategies, financial situation and needs of any specific recipient. It is based on numerous assumptions. Different assumptions could result in materially different results. Certain services and products are subject to legal restrictions and cannot be offered worldwide on an unrestricted basis and/or may not be eligible for sale to all investors. All information and opinions expressed in this document were obtained from sources believed to be reliable and in good faith, but no representation or warranty, express or implied, is made as to its accuracy or completeness (other than disclosures relating to UBS). All information and opinions as well as any forecasts, estimates and market prices indicated are current as of the date of this report, and are subject to change without notice. Opinions expressed herein may differ or be contrary to those expressed by other business areas or divisions of UBS as a result of using different assumptions and/or criteria.
In no circumstances may this document or any of the information (including any forecast, value, index or other calculated amount («Values»)) be used for any of the following purposes (i) valuation or accounting purposes; (ii) to determine the amounts due or payable, the price or the value of any financial instrument or financial contract; or (iii) to measure the performance of any financial instrument including, without limitation, for the purpose of tracking the return or performance of any Value or of defining the asset allocation of portfolio or of computing performance fees. By receiving this document and the information you will be deemed to represent and warrant to UBS that you will not use this document or otherwise rely on any of the information for any of the above purposes. UBS and any of its directors or employees may be entitled at any time to hold long or short positions in investment instruments referred to herein, carry out transactions involving relevant investment instruments in the capacity of prin-cipal or agent, or provide any other services or have officers, who serve as directors, either to/for the issuer, the investment instru-ment itself or to/for any company commercially or financially affiliated to such issuers. At any time, investment decisions (including whether to buy, sell or hold securities) made by UBS and its employees may differ from or be contrary to the opinions expressed in UBS research publications. Some investments may not be readily realizable since the market in the securities is illiquid and therefore valuing the investment and identifying the risk to which you are exposed may be difficult to quantify. UBS relies on information barriers to control the flow of information contained in one or more areas within UBS, into other areas, units, divisions or affiliates of UBS. Futures and options trading is not suitable for every investor as there is a substantial risk of loss, and losses in excess of an initial investment may occur. Past performance of an investment is no guarantee for its future performance. Additional information will be made available upon request. Some investments may be subject to sudden and large falls in value and on realization you may receive back less than you invested or may be required to pay more. Changes in foreign exchange rates may have an adverse effect on the price, value or income of an investment. The analyst(s) responsible for the preparation of this report may interact with trading desk personnel, sales personnel and other constituencies for the purpose of gathering, synthesizing and interpreting mar-ket information.
Tax treatment depends on the individual circumstances and may be subject to change in the future. UBS does not provide legal or tax advice and makes no representations as to the tax treatment of assets or the investment returns thereon both in general or with reference to specific client›s circumstances and needs. We are of necessity unable to take into account the particular invest-ment objectives, financial situation and needs of our individual clients and we would recommend that you take financial and/or tax advice as to the implications (including tax) of investing in any of the products mentioned herein.
This material may not be reproduced or copies circulated without prior authority of UBS. Unless otherwise agreed in writing UBS expressly prohibits the distribution and transfer of this material to third parties for any reason. UBS accepts no liability whatsoever for any claims or lawsuits from any third parties arising from the use or distribution of this material. This report is for distribution only under such circumstances as may be permitted by applicable law. For information on the ways in which CIO manages conflicts and maintains independence of its investment views and publication offering, and research and rating methodologies, please visit www.ubs.com/research. Additional information on the relevant authors of this publication and other CIO publication(s) referenced in this report; and copies of any past reports on this topic; are available upon request from your client advisor.
Options and futures are not suitable for all investors, and trading in these instruments is considered risky and may be appropriate only for sophisticated investors. Prior to buying or selling an option, and for the complete risks relating to options, you must receive a copy of «Characteristics and Risks of Standardized Options». You may read the document at https://www.theocc.com/about/publications/character-risks.jsp or ask your financial advisor for a copy.
Investing in structured investments involves significant risks. For a detailed discussion of the risks involved in investing in any par-ticular structured investment, you must read the relevant offering materials for that investment. Structured investments are unse-cured obligations of a particular issuer with returns linked to the performance of an underlying asset. Depending on the terms of the investment, investors could lose all or a substantial portion of their investment based on the performance of the underlying asset. Investors could also lose their entire investment if the issuer becomes insolvent. UBS Financial Services Inc. does not guaran-tee in any way the obligations or the financial condition of any issuer or the accuracy of any financial information provided by any
36 UBS CIO GWM September 2020
issuer. Structured investments are not traditional investments and investing in a structured investment is not equivalent to investing directly in the underlying asset. Structured investments may have limited or no liquidity, and investors should be prepared to hold their investment to maturity. The return of structured investments may be limited by a maximum gain, participation rate or other feature. Structured investments may include call features and, if a structured investment is called early, investors would not earn any further return and may not be able to reinvest in similar investments with similar terms. Structured investments include costs and fees which are generally embedded in the price of the investment. The tax treatment of a structured investment may be com-plex and may differ from a direct investment in the underlying asset. UBS Financial Services Inc. and its employees do not provide tax advice. Investors should consult their own tax advisor about their own tax situation before investing in any securities.
Important Information About Sustainable Investing Strategies: Sustainable investing strategies aim to consider and incorpo-rate environmental, social and governance (ESG) factors into investment process and portfolio construction. Strategies across geographies and styles approach ESG analysis and incorporate the findings in a variety of ways. Incorporating ESG factors or Sus-tainable Investing considerations may inhibit the portfolio manager’s ability to participate in certain investment opportunities that otherwise would be consistent with its investment objective and other principal investment strategies. The returns on a portfolio consisting primarily of sustainable investments may be lower or higher than portfolios where ESG factors, exclusions, or other sustainability issues are not considered by the portfolio manager, and the investment opportunities available to such portfolios may differ. Companies may not necessarily meet high performance standards on all aspects of ESG or sustainable investing issues; there is also no guarantee that any company will meet expectations in connection with corporate responsibility, sustainability, and/or impact performance.
Distributed to US persons by UBS Financial Services Inc. or UBS Securities LLC, subsidiaries of UBS AG. UBS Switzerland AG, UBS Europe SE, UBS Bank, S.A., UBS Brasil Administradora de Valores Mobiliarios Ltda, UBS Asesores México, S.A. de C.V., UBS Securi-ties Japan Co., Ltd, UBS Wealth Management Israel Ltd and UBS Menkul Degerler AS are affiliates of UBS AG. UBS Financial Ser-vices Incorporated of Puerto Rico is a subsidiary of UBS Financial Services Inc. UBS Financial Services Inc. accepts responsibility for the content of a report prepared by a non-US affiliate when it distributes reports to US persons. All transactions by a US person in the securities mentioned in this report should be effected through a US-registered broker dealer affili-ated with UBS, and not through a non-US affiliate. The contents of this report have not been and will not be approved by any securities or investment authority in the United States or elsewhere. UBS Financial Services Inc. is not acting as a municipal advisor to any municipal entity or obligated person within the meaning of Section 15B of the Securities Exchange Act (the «Municipal Advisor Rule») and the opinions or views contained herein are not intended to be, and do not constitute, advice within the meaning of the Municipal Advisor Rule.
External Asset Managers / External Financial Consultants: In case this research or publication is provided to an External Asset Manager or an External Financial Consultant, UBS expressly prohibits that it is redistributed by the External Asset Manager or the External Financial Consultant and is made available to their clients and/or third parties.
For country information, please visit ubs.com/cio-country-disclaimer-gr or ask your client advisor for the full disclaimer.
Version B/2020. CIO82652744© UBS 2020. The key symbol and UBS are among the registered and unregistered trademarks of UBS. All rights reserved.