BenQ America Corp.15375 Barranca Parkway. Suite A-205. Irvine, CA 92618 Tel: (949) 255-9500 www.BenQ.us

Education Deal Registration – http://promotions.benq.us/education/B2B Deal Registration - http://promotions.benq.us/dealregistration/

Ideal Choice for Education and Home Entertainment Use!

The BenQ 3D goggles are exceptionally designed to provide an immersive 3D viewing experience with BenQ’s DLP® LinkTM-enabled projectors*.

*BenQ Projector with 3D Ready Function* Please visit the http://www.benq.us/product/projector/3dglasses website for a full list of supported products

3D Goggles SpecificationPart Number

Response Time

Contrast ratio (On/Off)

View Angle (Left/ Right)

Viewing Distance

Detect Type

Storage Temperature

Operation Temperature

Operation Humidity

Power Consumption

Batteries

Dimension (H x W x L)

Accessories

5J.J0T14.011

1.7ms

1000:1(typical)

50 degree (typical)

~8M

DLP Link (Photo Sensor)

-10~60˚C

0~50˚C

20~85%

4 mW (operation) / ~55hrs

CR2032 x 2 (pcs)

45.9 x 168.8 x 165.2(mm)

Quick start guide (paper) / Nose pad x 2 (Big/small)

3D Projection Ready on the Go

5

English

This glasses support DLP-LINK 3D Ready projectors. When DLP-LINK signal has not been detected for 180seconds, the 3D glasses will automatically turn off.

The 3D glasses will blink when the batteries are reaching the end of life.

WARNING: The 3D glasses are not prescription eyewear, sunglasses, nor a protective goggle. Do not use theglasses for any general eyewear purposes (e.g., driving, reading, protection from sunlight or ultraviolet light,etc.) as such use may result in injury.

Cleaning the lensesClean the lenses whenever you notice dirt or dust on the surfaces.• Clean the lenses with a commercially available blower and/or lens cleaner.• If there is dirt or smears, use lens-cleaning paper or moisten a soft cloth with lens cleaner and gently wipe

the lens surfaces.

Never rub the lenses with abrasive materials.

Nose pieceReplace with one of two sizes fora comfortable fit

6

EnglishWARNING: To avoid the damage of battery cover, be sure to follow the steps as illustrations for batteryinstallation.

4

English

Light SensorDo not block

Battery coverRemove battery cover, then install two CR2032 type batteries.

ON buttonPress to start 3D function > Switch inverse images between your eyes

4

English

Light SensorDo not block

Battery coverRemove battery cover, then install two CR2032 type batteries.

ON buttonPress to start 3D function > Switch inverse images between your eyes

4

English

Light SensorDo not block

Battery coverRemove battery cover, then install two CR2032 type batteries.

ON buttonPress to start 3D function > Switch inverse images between your eyes