7
3d filament orange 3D printing consumables have stringent requirements on the wire. After the gear is wound into the nozzle, the distance between the gear and the fixed wheel is constant. If the wire diameter is too long (more than 1.80MM), the distance between the two will swell. Open, then re-feeding is easy to bite without feeding. Conversely, if the diameter of the wire is small, the gear will not sense the presence of the wire and will not bite into the material. The minimum is about 1.58, depending on the machine produced by each manufacturer. We can provide 45 common colors for choice, we can also accept buyer’s OEM customized colors, just provide a sample or pantone No. We can make for you. Quality control: 1. All of our 3D printer filaments are 100% virgin material,never use recycled material or regrind material,and all had achieved the latest certificate. 2.Before the mass production,our engineer always do the test to make sure that each batch of new raw materials must be printed by 3D printer. 3.The Laser diameter runs automatically to control the diameter of the filaments and keeps it in a right range of 1.75/3.0mm,and our engineer will adjust it immediately when it alarms to indicate of wrong size,and this unqualified filament will be cut off and never use it. 4.To keep the filaments dry,each roll of filament is packed in a vacuumed polybag with a desiccant inside of it. 7. We accept customized color. We have 45 common colors keep in stock:

3d filament orange - 3d-printingfilament.com · Title: E:\3D\å¤ è´¸å¿«è½¦SEO\SEO\å»ºç« èµ æ æ ¶é å æ °(1)\å»ºç« èµ æ æ ¶é å \ä¸ ï¼ äº§å

  • Upload
    hadiep

  • View
    228

  • Download
    0

Embed Size (px)

Citation preview

3d filament orange

3D printing consumables have stringent requirements on the wire. After the gear is wound intothe nozzle, the distance between the gear and the fixed wheel is constant. If the wire diameter istoo long (more than 1.80MM), the distance between the two will swell. Open, then re-feeding iseasy to bite without feeding. Conversely, if the diameter of the wire is small, the gear will notsense the presence of the wire and will not bite into the material. The minimum is about 1.58,depending on the machine produced by each manufacturer.We can provide 45 common colors for choice, we can also accept buyer’s OEM customized colors,just provide a sample or pantone No. We can make for you.

Quality control:1. All of our 3D printer filaments are 100% virgin material,never use recycled material or regrindmaterial,and all had achieved the latest certificate.

2.Before the mass production,our engineer always do the test to make sure that each batch ofnew raw materials must be printed by 3D printer.

3.The Laser diameter runs automatically to control the diameter of the filaments and keeps it in aright range of 1.75/3.0mm,and our engineer will adjust it immediately when it alarms to indicateof wrong size,and this unqualified filament will be cut off and never use it.

4.To keep the filaments dry,each roll of filament is packed in a vacuumed polybag with a desiccantinside of it.7. We accept customized color.

We have 45 common colors keep instock:

iMLucky 3d takes great pride in it’s work and in the wide variety of products that iMLucky offers.We are experienced in servicing the US market, European market and Africa market .Please beaware that our production lead times depend on specific items and item quantities. Our successhas been based on our understanding of the demands and nature of promotional and marketingdeadline s. That's why we always ensure that every order is delivered on time.