Upload
fredy-gualdron-vargas
View
18
Download
1
Tags:
Embed Size (px)
Citation preview
Summary of Software Features
Feat
Aut
Agg
Aut(IEE
Unit
Broa
Virt
Mul
Spa
Rap
Qua
RMO
Ema
Man
Port
Aler
SUPERSTACK 3 SWITCH 4200 SERIES MANAGEMENT QUICK REFERENCE GUIDE
dqa1730-0AAA02.fm Page 1 Wednesday, October 9, 2002 2:08 PM1
This table summarizes the software features that are supported by the Switch 4200 series.
For information about managing the software features of the Switch, refer to the SuperStack 3 Switch Management Interface Reference Guide on the CD-ROM that accompanies the Switch.
ure Switch 4200 Series
omatic IP Configuration Supported
regated Links Supported on 10/100/1000BASE-T ports and GBIC ports
omatic configuration of Aggregated Links - LACP E 802.3ad)
Supported in software version 2.xx and all subsequent versions.
Stacking Supported in software version 2.xx and all subsequent versions. Up to four units can be connected to form a stack via the 10/100/1000BASE-T ports.
dcast Storm Control Supported
ual LANs (VLANs) Support for up to 60 VLANs using the IEEE 802.1Q standard
ticast Filtering 128 Multicast filter groups supported
nning Tree Protocol (802.1D-1998) Supported
id Spanning Tree Protocol (802.1w) Supported
lity of Service (QoS) Support for two 802.1p priority queues per port
N Four groups supported: Statistics, History, Alarms, Events
il Notification of Events Supported
agement Web interface, command line interface, CLI Wizard and SNMP supported
Security Disconnect Unauthorized Device (DUD) supported
t LED Supported in software version 2.xx and all subsequent versions.
2Web Interface Map Device View
SyBPhPrSe
To
Setup
Console Folder
InitializeRebootSoftware Upgrade
Control Folder
CreateModify
Alert Folder
dqa1730-0AAA02.fm Page 2 Wednesday, October 9, 2002 2:08 PMFor detailed descriptions of the web interface operations and the command line interface (CLI) commands that you require to manage the Switch please refer to the Management Interface Reference Guide supplied in HTML format on the CD-ROM that accompanies your Switch.
stemridgeysical Interfaceotocolcurity
p-level Device View
Address DatabaseBroadcast Storm ControlLink AggregationMulticast FilterSpanning Tree
Bridge Folder
EthernetPhysical Interface Folder
Getting StartedConsoleControlManagementTelnetUnit
System Folder
History-1 HourHistory-48 Hours
History Folder
SnoopMode
IGMP Folder
AddAging TimeFindRemoveSummary
Address Database Folder
Setup
Broadcast Storm Control Folder
ModifySummary
Link Aggregation Folder
SetupAlertMonitor
Management Folder
ConnectTelnet Folder
NameNotepad
Unit Folder
IGMP
Multicast Filter Folder
Add PortAdmin StateLACP State
Remove PortpartnerID
Modify Folder
Setup
Spanning Tree Folder
HistorySetupSmart AutosensingStatisticsSummary
Ethernet Folder
IPProtocol Folder
Setup
IP Folder
DeviceNetwork
Security Folder
User
Device Folder
Modify
User Folder
Access
Network Folder
Port Security
Access Folder
Alert LEDNameNotepad
Unit Folder
TestDeleteSummary
ModifySummary
Monitor Folder
Web Interface Device Mimic
A Q
Ope
Bridg
Bridg
Bridg
Bridg
Bridg
Bridg
Bridg
Bridg
Bridg
Bridg
Bridg
Bridg
Bridg
Bridg
Phys
NameNotepad
History-1 HourHistory-48 Hours
Port Setup SummarySetup
SetupStatistics
dqa1730-0AAA02.fm Page 3 Wednesday, October 9, 2002 2:08 PM3
uick Guide to the Web Interface OperationsThis table describes the operations that are available in the Web Interface.
ration What does the Operation do?
e Address Database Add Adds an address to the database.
e Address Database Aging Time Configures the aging period for the address database.
e Address Database Find Displays the location of a MAC address.
e Address Database Remove Deletes an address from the database.
e Address Database Summary Views all addresses that are stored against a particular port or aggregated link.
e Broadcast Storm Control Setup Configures Broadcast Storm Control parameters for the stack.
e Link Aggregation Modify AddPort Adds a port to an aggregated link.
e Link Aggregation Modify Admin State Changes the state of an aggregated link.
e Link Aggregation Modify LACP State Enables or disables LACP on a port.
e Link Aggregation Modify Partner ID Sets an aggregated link to connect to a specified partner unit.
e Link Aggregation Modify Remove Port Deletes a port from an aggregated link.
e Link Aggregation Summary Lists all of the aggregated links.
e Multicast Filter IGMP SnoopMode Configures IGMP multicast learning for the unit.
e Spanning Tree Setup Configures spanning tree parameters.
ical Interface Ethernet History History-1 Hour Displays packet activity for all ports on a unit over the previous hour.
Unit
SetupPort Security
4Physical Interface Ethernet History History-48 Hours Displays packet activity for all ports on a unit over the previous 48 hours.
Physical Interface Ethernet Setup Sets up single or multiple ethernet ports.
Physical Interface Ethernet Smart Autosensing Configures smart autosensing for the unit.
Phys
Phys
Proto
Secu
Secu
Syste
Syste
Syste
Syste
Syste
Syste
Syste
Syste
Syste
Syste
Syste
Syste
Syste
Syste
Syste
Syste
Syste
Operation (Continued) What does the Operation do?
dqa1730-0AAA02.fm Page 4 Wednesday, October 9, 2002 2:08 PMical Interface Ethernet Statistics Displays statistics for packet and error traffic on one or more ports.
ical Interface Ethernet Summary Displays summary information for the unit.
col IP Setup Configures the IP information for the unit.
rity Device User Modify Modifies the password of the current user.
rity Network Access Port Security Sets the security mode of single or multiple ports on a unit.
m Console Setup Configures the type, speed and flow of a console port.
m Control Initialize Initailizes the unit to factory default settings.
m Control Reboot Resets the unit.
m Control Software Upgrade Upgrades the software on the unit.
m Getting Started Guides you through the initial configuration of the unit.
m Management Alert Create Creates and defines an email alert and its distribution.
m Management Alert Delete Deletes an existing email alert.
m Management Alert Modify Modifies an existing email alert and its distribution.
m Management Alert Summary Displays summary information for configured email alerts.
m Management Alert Test Sends a test email alert.
m Management Monitor Modify Sets up a device or port to be monitored for email alerts.
m Management Monitor Summary Displays summary information for devices or ports on which monitoring is enabled.
m Management Setup Changes information for the unit.
m Telnet Connect Starts a Telnet session to the unit in a separate window.
m Unit Alert LED Displays the Alert LED configuration for the unit selected.
m Unit Name Assigns a name to the unit.
m Unit Notepad Opens a notepad for the unit.
Command Line Interface Map To display sub-menus:
At the Select menu option prompt, enter the name of the menu or menus.
To display parent menus:At the Select menu option prompt, enter quit.
To display the Top-level menu:
dqa1730-0AAA02.fm Page 5 Wednesday, October 9, 2002 2:08 PM5
Press the [Esc] key.
To obtain help:At the Select menu option prompt, enter ?.
bridge
gettingStarted
logout
physicalInterface
protocol
security
system
trafficManagement
Top-level Menu
ethernet
Physical Interface Menu
addressDatabase
broadcastStormControl
linkAggregation
port
spanningTree
summary
vlan
multicastFilter
Bridge Menu
addPort
name
removePort
Modify Menu
addPort
removePort
summary
autoDiscovery
RouterPort Menu
queryMode
snoopMode
IGMP Menu
stpDefaultPathCosts
stpForwardDelay
stpHelloTime
stpMaxAge
stpPriority
stpState
stpVersion
Spanning Tree Menu
create
delete
detail
modify
summary
VLAN Menu
add
agingTime
find
remove
summary
Address Database Menu
igmp
routerPort
Multicast Filter Menu
detail
lacpState
stpCost
stpFastStart
summary
Port Menu
detail
modify
summary
Link Aggregation Menu
detail
flowControl
portCapabilities
portMode
portState
smartAutosense
summary
Ethernet Menu
addPort
linkState
partnerID
removePort
Modify Menu
6ip
Protocol Menu
default
noDefault
summary
Route Menu
modify
summary
Interface Menu
device
Security Menu
basicConfig
initializeConfig
interface
ping
route
IP Menu
access
user
Device Menu
Access Menu
dqa1730-0AAA02.fm Page 6 Wednesday, October 9, 2002 2:08 PMFor detailed descriptions of the web interface operations and the command line interface (CLI) commands that you require to manage the Switch please refer to the Management Interface Reference Guide supplied in HTML format on the CD-ROM that accompanies your Switch.
control
inventory
management
summary
unit
System Menu
network
create
delete
modify
summary
pwdRecover
User Menu
modify
summary
access
Network Menu
portSecurity
Access Menu
initialize
reboot
softwareUpgrade
Control Menu
alert
contact
location
monitor
name
password
remoteAccess
snmp
Management Menu
community
get
next
set
trap
SNMP Menu
classifier
profile
serviceLevel
trafficQueue
QOS Menu
qos
Traffic Management Menu
bridge
gettingStarted
feature
logout
physicalInterface
protocol
security
system
trafficManagement
Top-level Menu
create
delete
modify
summary
Trap Menu
create
delete
detail
modify
summary
Classifier Menu
addClassifier
assign
detail
listPorts
create
delete
modify
removeClassifier
summary
Profile Menu
summary
Service Level Menu
summary
Traffic Queue Menu
modify
summary
Monitor Menu
addAddress
create
delete
modify
removeAddress
summary
test
Alert Menu
Unit Menu
AlertLED
select
A Quick Guide to the Command Line Interface CommandsThis table describes the commands that are available in the Command Line Interface.
Command What does the Command do?
bridge addressDatabase add Adds a statically configured address.
bridge addressDatabase agingTime Sets the bridge address aging time.
bridge addressDatabase find Finds an address.
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
brid
dqa1730-0AAA02.fm Page 7 Wednesday, October 9, 2002 2:08 PM7
ge addressDatabase remove Removes an address.
ge addressDatabase summary Displays summary information on addresses.
ge broadcastStormControl Enables or disables broadcast storm control.
ge linkAggregation detail Displays detailed information on an aggregated link.
ge linkAggregation modify addPort Adds a port to an aggregated link.
ge linkAggregation modify linkState Enables or disables an aggregated link.
ge linkAggregation modify partnerID Sets an aggregated link to connect to a specified partner unit.
ge linkAggregation modify removePort Removes a port from an aggregated link.
ge linkAggregation summary Displays summary information on an aggregated link.
ge multicastFilter igmp queryMode Enables or disables IGMP query mode.
ge multicastFilter igmp snoopMode Enables or disables IGMP Multicast learning.
ge multicastFilter routerPort addPort Adds a statically configured router port.
ge multicastFilter routerPort autoDiscovery Enables or disables router port auto discovery.
ge multicastFilter routerPort removePort Removes a router port.
ge multicastFilter routerPort summary Displays summary information on a router port.
ge port detail Displays detailed information on a port.
ge port lacpState Enables or disables LACP on a port.
ge port stpCost Sets the Spanning Tree path cost parameter.
ge port stpFastStart Enables or disables Spanning Tree fast start.
ge port summary Displays summary information on a port.
ge spanningTree stpDefaultPathCosts Sets the bridge Spanning Tree default path costs
ge spanningTree stpForwardDelay Sets the bridge Spanning Tree forward delay parameter.
ge spanningTree stpHelloTime Sets the bridge Spanning Tree hello time parameter.
ge spanningTree stpMaxAge Sets the bridge Spanning Tree maximum age parameter.
ge spanningTree stpPriority Sets the bridge Spanning Tree priority parameter.
ge spanningTree stpState Enables or disables Spanning Tree on a bridge.
ge spanningTree stpVersion Selects the version of Spanning Tree to run on the bridge
ge summary Displays summary information on the bridge.
ge vlan create Creates a VLAN.
ge vlan delete Deletes a VLAN.
ge vlan detail Displays detailed information on a VLAN.
ge vlan modify addPort Adds a port to a VLAN.
ge vlan modify name Names a VLAN.
8bridge vlan modify removePort Removes a port from a VLAN.
bridge vlan summary Displays summary information on a VLAN.
gettingStarted Displays the CLI Wizard
logout Logs the User out of the CLI.
physicalInterface ethernet detail Displays detailed information on an Ethernet port.
physicalInterface ethernet flowControl Enables or disables flow control.
phys
phys
phys
phys
phys
prot
prot
prot
prot
prot
prot
prot
prot
secu
secu
secu
secu
secu
secu
secu
secu
syst
syst
syst
syst
syst
syst
syst
syst
syst
syst
syst
syst
Command (Continued) What does the Command do?
dqa1730-0AAA02.fm Page 8 Wednesday, October 9, 2002 2:08 PMicalInterface ethernet portCapabilities Sets the port capabilities.
icalInterface ethernet portMode Sets the port speed and duplex mode.
icalInterface ethernet portState Enables or disables an Ethernet port.
icalInterface ethernet smartAutosense Enables or disables smart autosensing.
icalInterface ethernet summary Displays summary information on an Ethernet port.
ocol ip basicConfig Performs basic IP management configuration.
ocol ip initializeConfig Resets IP information to factory defaults.
ocol ip interface modify Modifies IP interface information.
ocol ip interface summary Displays summary information on the IP interface.
ocol ip ping Polls remote devices.
ocol ip route default Defines the default route.
ocol ip route noDefault Removes the default route.
ocol ip route summary Displays summary information on the default route.
rity device access modify Modifies access rights.
rity device access summary Displays summary information on access rights.
rity device user create Creates a user.
rity device user delete Deletes a user.
rity device user modify Modifies a user.
rity device user pwdRecover Enables or disables password recovery.
rity device user summary Displays summary information on users.
rity network access portSecurity Enables or disables DUD and NTK.
em control initialize Resets to factory defaults.
em control reboot Performs a system reboot.
em control softwareUpgrade Performs an agent software upgrade.
em inventory Displays unit information.
em management alert addAddress Adds an email address to an alert.
em management alert create Creates an alert.
em management alert delete Deletes an alert.
em management alert modify Modifies an existing alert.
em management alert removeAddress Removes an email address from an alert.
em management alert summary Displays summary information for the alert settings.
em management alert test Generates a test alert.
em management contact Sets the system contact.
system management location Sets the system location.
system management monitor modify Modifies a monitored item.
system management monitor summary Displays summary information for monitored items.
system management name Sets the system name.
system management password Sets the system password.
system management remoteAccess Changes remote access permissions.
syst
syst
syst
syst
syst
syst
syst
syst
sys
sys
sys
tra
traf
traf
traf
traf
traf
traf
traf
traf
traf
traf
traf
traf
traf
traf
traf
Command (Continued) What does the Command do?
dqa1730-0AAA02.fm Page 9 Wednesday, October 9, 2002 2:08 PM9
em management snmp community Sets the SNMP community string.
em management snmp get Gets SNMP objects.
em management snmp next Gets the next SNMP objects.
em management snmp set Sets SNMP objects.
em management snmp trap create Creates a trap destination.
em management snmp trap delete Deletes a trap destination.
em management snmp trap modify Modifies a trap destination
em management snmp trap summary Displays summary information on a trap destination.
tem summary Displays summary information.
tem unit alertLED Controls the Alert LED.
tem unit select Inputs commands to another unit.
fficManagement qos classifier create Creates a classifier.
ficManagement qos classifier delete Deletes a classifier.
ficManagement qos classifier detail Displays detailed classifier information.
ficManagement qos classifier modify Modifies a classifier.
ficManagement qos classifier summary Displays summary information on classifiers.
ficManagement qos profile addClassifier Adds a classifier to a QoS profile.
ficManagement qos profile assign Assigns QoS profiles to ports.
ficManagement qos profile create Creates a QoS profile.
ficManagement qos profile delete Deletes a QoS profile.
ficManagement qos profile detail Displays detailed information about a QoS profile.
ficManagement qos profile listPorts Lists all ports with their associated QoS profiles.
ficManagement qos profile modify Modifies a QoS profile.
ficManagement qos profile removeClassifier Removes a classifier from a QoS profile.
ficManagement qos profile summary Displays a summary of QoS profiles.
ficManagement qos serviceLevel summary Displays summary information on service levels.
ficManagement qos trafficQueue summary Displays summary information on traffic queues.
10
dqa1730-0AAA02.fm Page 10 Wednesday, October 9, 2002 2:08 PM
dqa1730-0AAA02.fm Page 11 Wednesday, October 9, 2002 2:08 PM11
12
Copyright Unless othe3Com and t
dqa1730-0AAA02.fm Page 12 Wednesday, October 9, 2002 2:08 PM 2002, 3Com Technologies. All rights reserved.rwise indicated, 3Com registered trademarks are registered in the United States and may or may not be registered in other countries.he 3Com logo are registered trademarks of 3Com Corporation.
Part Number: DQA1730-0AAA02Published: October 2002
Summary of Software FeaturesWeb Interface Map Device ViewWeb Interface Device MimicA Quick Guide to the Web Interface OperationsCommand Line Interface MapA Quick Guide to the Command Line Interface Commands