7/29/2019 360_Degree_Optics_Illuminators.pdf

1/2www.opto-engineering.com

lTPC30 LED ring illuminator has

been specifcally designed or OE PC13030and PC12030 Pericentric Lenses. TheIlluminator is made o 8 LED bar modulesassembled on a mounting ange. The barscan be electrically connected in parallelby means o cables plugged into barconnectors, thus maintaining the deault24V DC input voltage in any module. Eachbar is provided with a partially diusivewindow, ensuring homogeneous targetillumination; each module can be orientedin order to achieve the most appropriate

angle o illumination. The LED illuminatorcan be easily assembled onto a PericentricLens by means o the thread in themounting ange. This unit is also suitableor direct illumination in Telecentric Lensapplications.

lTPCPW is a LED illuminator designedor OE PolyView Opticsillumination.The electrical layout is the same as theLTRNPC30(see above).The eight bars can be oriented in order toprovide the most suitable geometry orilluminating the outer suraces o a sampleimaged by a PCPW0xx lens.The illuminator can be assembled on the

PolyView Lens and placed at dierentheights by unscrewing the M3 grainson the illuminator ange into one o theilluminator V-grooves.

part number lTPC30ight coour white, 6300 K

dimensions

outer diameter (mm) 180,0

inner diameter (mm) 153,0

height (mm) 35,0

weight (g) 250

mount M153 x 1

votage (V, DC) 24

power (watt) 9

compatibe PC enses PC13030HP, PC12030HP

compatibe TC enses TCxx80, TCxx96, TCxx120

part number lTPCPWight coour white, 6300 K

dimensions

outer diameter (mm) 160,0

inner diameter (mm) 117,0

height (mm) 35,0

weight (g) 160

mount side M3 through-holes

votage (V, DC) 24

power (watt) 9

compatibe PC enses PCPW013, PCPW012, PCPW023compatibe TC enses TC2372, TCxx80

IlluMINatoRS FoR 360 oPtIcS

7/29/2019 360_Degree_Optics_Illuminators.pdf

2/2www.opto-engineering.com

lTPW is a small LED ring illuminator

compatible with dierent OE products andsuitable or a variety o inspections.The conic shape o the diuser provides theoptimum illumination geometry or HoleInspection Optics since the light output isoriented towards the hole suraces.The height o the illuminator can beadjusted to ft dierent object geometriesby means o a ange which locks theilluminator onto the Hole Inspection lensbody.This illuminator is also perectly suitable

or illuminating the inner sides o a cavityimaged by a PolyView Lens; the illuminatorange is threaded to ft the PolyView Lensinternal mounting thread.LTRNPWHI also mechanically andoptically fts TC230x and TC4M0x typetelecentric lenses, allowing or a very evenillumination, ideal or surace measurementapplications.This illuminator can also be used incombination with OE MC3-03X Variable

Macro Lens over the entire range omagnifcations.

part numberlTPWight coour white, 6300 K

dimensions

outer diameter (mm) 54,0

inner diameter (mm) 28,0

height (mm) 18,3

weight (g) 30

mount threaded retaining ring

votage (V, DC) 24

power (watt) 3

compatibe PC enses PCPW0xx, PCHI0xx

other compatibe enses TC230x, MC3-03X

LTRNPCHI assembled into a PolyViewLens to provide inner sampleillumination.

LTRNPCHI used in combination withan Hole Inspection Lens.

LTRNPCHI fts OE small telecentriclens or perect sample illuminationand accurate measurement.

LTRNPCHI mounted on a MC3-03Xmacro lens.

IlluMINatoRS FoR 360 oPtIcS