358 Astro LED - suspension · Astro LED - suspension acc. 533 adjustable connector ... (UNI-EN 12464-1) recommends a speciﬁ c UGR value for different applications ranging between

358

1988

85

5080

5080

0/180°

358

120

280300

Ø512

100

163

LED EM

Astro LED - suspension

acc. 533 adjustable connector

993975-00

Adjustable connector - 120°

acc. 1175 Box997658-00

To be used when pur-chasing Astro EM ver-sion, with sub-code –07.

acc. 538 suspension for ceiling fitting

993976-00

In stainless steel. Adjustable suspension (0/180°) to allow proper mounting of the Astro.Purchase separately chain/tiges. Ideal for ellip-tical beam Astro version.

Accessories

The UGR (unifi ed glare rating) is an international unifi ed measure developed by the CIE (Commission International de l’Eclairage) to assess the direct glare generated by a lighting system. The European standard regulating the lighting of indoor work places (UNI-EN 12464-1) recommends a specifi c UGR value for different applications ranging between 10 and 30; the lower the UGR value, the lower the glare. The exact value of this index differs by project type because it depends on the position of the luminaires, room characteristics (dimensions, refl ections) and on the point of observation of viewers.

Classification of UGR values by applications

UGR

≤ 16 Very demanding applications (technical drawings)≤ 19 Offi ces and schools (reading, business meetings, computer work)≤ 22 Industrial applications, craftsmen≤ 25 Transit areas> 28 High glare

Below are some examples of industrial environments requiring the installation of fi xtures with UGR<22 in compliance with standard UNI-EN 12464-1:• General areas inside buildings – storage areas• Industrial and manufacturing activities• Chemical and pharmaceutical industry• Mechanical, electronic and electro-technical industry• Paper mills

07D LED sospensioni_Astro.indd 358 20/06/17 11:56

359

SUS

PENS

ION


Housing/Frame: in die-cast alu-minium with cooling fi ns integrated into the cover and designed with a very small surface exposed to wind.

Diffuser: tempered glass, 4 mm thick, resistant to thermal shocks and impacts (UNI-EN 12150-1: 2001).

Coating: polyester resin for powder coating, resistant to corrosion and saline environments.

Standard supply: temperature con-trol inside the device with automatic resetting. complete with quick con-nection.

Dimmable: Standard 1-10V dim-mer, dimmable from 10% to 100%.

LED: power factor ≥0,95.

On request: possibility for the various options for managing the supply point (see table on p. XVII). Presence sensor or light sensor to wall or ceiling (see chapter dimmable fixture control kit).

electronic safety device to protect the LED module and the related ballast compliant

with EN 61547.It works in two modes:- differential mode: surge between power cables and between the phase and neutral.- common mode: surge between power, L/N and ground cables or between the fixture’s body if it is of class II and installed on a metal pole.On request: for Class II fixtures, protection up to 10KV.

SURGE

Luminous flux maintenanceTa = -40°C ÷ +40°C

90% 100.000h (L90B10) 12-16-24 LED

90% 80.000h (L90B10) 32 LED

Astro has all the qualities of the new LED technology. With a functional and highly recognisable design, it is also very ver-satile thanks to multiple versions with different optics featuring narrow-beam, wide-beam or elliptical lenses for great design fl exibility.

The UL Verifi ed Mark is identifi ed with the ““Low Flicker Risk” logo that includes a maximum fl icker va-lue of 8% at frequencies of ≥400 Hz.

On request

On request: ideal version for spaces with a high concentration of particular volatile chemicals around the luminaires (see chemical compatibility table in

chapter legend and Info).

On request:

LED AMBER

version with LED AMBER 2200K with subcode -73

LED 6500K

version with LED 6500K with subcode -0083


360

verifi care OTTICHE - n. LED

Light level recognition area Presence / motion detection

α = 13°

h

d

h * d

8 m 1.8 m

10 m 2.3 m

12 m 2.7 m

14 m 3.2 m

16 m 3.7 mh

d

αhigh = 60°

α low = 72°

h * Zoom d

8 m low 12.0 m

9 m low 13.5 m

10 m low 15.0 m

11 m low 16.5 m

12 m low 18.0 m

12 m high 14.0 m

13 m high 15.2 m

14 m high 16.4 m

15 m high 17.6 m

16 m high 18.8 m1 2

A

B

Time

Ligh

t

Default Parameter Motion Detector

A light-level1 time delayB sec. level2 if vacant

Astro LED - with sensor

On request with sub-code -0061: Astro DALI version with easy-to-use, safe and con-venient automatic presence and light sensor.

Presence and light sensors - DIMM DALI

On request with sub-code -19: Astro with easy-to-use, safe and convenient DIMM 1-10V (with the option to dim lights depending on the amount of daylight).

Presence sensors - DIMM 1/10V

TECHNICAL SPECIFICATIONSRated supply voltage 220-240 Vac - 50/60Hz

High frequency 5.8GHz±75MHz, ISM wave band, <0.5mW

Detection angle ceiling: 360° - wall: 150°

Detection area 8 max (choice)

Detection motion speed 0.5~3m/s

Installing height ceiling: 3-15 m max.

Power consumption ≤0.5W (standby), <1W (operation)

IP degree IP65

Technology Microwave

Operating temperature (sensor) -35 ... +70 °C

Hold time (choice) 5s / 30s / 90s / 3min / 20min /30min

Ambient light (choice) 5lux / 15lux / 30lux / 50lux /100lux / 150lux / Disable

Stand-by period (choice) 5s / 5min / 10min / 30min / 1h / ∞Stand-by DIMM level (choice) 10% / 20% / 30%/ 50%

(Optional) remote control to change parameters after installation, without opening the fi xture TECHNICAL SPECIFICATIONS FEATURES

Power source 220-240V AC - 50/60 HzRated Load 600 WPower consumption <0,9 W

High frequency 5,8GHz CW Radar, ISM band - 0,2 - <10 mW

Installing height ceiling: 2-8m

Detection area ceiling: 360° Ambient light (choice) 2-10-50-2000 Lux

Detection distance (adjustable) ceiling: Ø 1-8 m Hold time (choice) min: 5sec (± 3 sec.)

max: 30min (±1 min.)

Detection motion speed 0,6-1-1,5 m/s Stand-by period (choice) 10s, 1min, 5min, 10min,

30min, 1H, +∞,0s

Detection range (choice) 10%-50%-75%-100%

Stand-by DIMM level (choice) 10%-20%-30%-50%

• High-frequency motion detector with dimmer for invisible light switching, especially suited for use in lighting fi xtures.• Dimmable ballast with 1-10V interface.• Inputs for multiple devices to cover a larger detection area (see rated load).• Detection range, twilight value and additional activation time may be set with a potentiometer.• HF technology: 5.8GHz, it reacts to very small movements, re-gardless of temperature; it also sees through walls.

SENSOR

DIMM DALI

SENSOR

DIMM 1/10V

If the sensor does not detect motion, lights stay on constant for a pre-set time.

As soon as the sensor detects motion in the scan area, lights will automatically increase to 100%.

If no motion is detected after a certain amount of time, the sen-sor will dim back to the set level.

Lights can be dimmed from 100% to 1% (with the option to go completely OFF)

Time can be set from 30 sec. to 60 min.

EXAMPLE OF THE 2-STEP DIMMING FUNCTION

TECHNICAL SPECIFICATIONS

Rated supply voltage 220-240 Vac - 50/60Hz

Power consumption 2 W

Output, stand-by 0,5 W

Operating temperature (sensor) 0 ... +60 °C

IP degree IP65

Time delay (regolabile) min: 30sec - max: 60min

Technology PIR

Max. installation height 16m

Light detection angle 13 °

Motion detection anglehigh low

72° 60°

Momentary-action switch input for on/off switching and dimming

All functions can be set by request or with the (optional) remote control


361

163

24 LED

16 LED

12 LED

100

Ø46

2Ø

462

Ø46

2

32 LED

Ø51

2

163

24 LED

16 LED

12 LED

100

Ø46

2Ø

462

Ø46

2

32 LED

Ø51

2

IP66IK08

IP66IK08 UGR<22

verifi care OTTICHE - n. LED

UGR<22

Ethr

+40C° -40

LOW

FLICKER

Ethr

+40C° -40

LOW

FLICKER

94W=6/8kV125W=6/8kV187W=6/8kV SURGE

new 2786

5˚5˚ 15˚15˚ 25˚25˚ 35˚35˚

45˚45˚

55˚55˚

65˚65˚

75˚75˚85˚85˚95˚95˚105˚105˚115˚115˚

150

300

450

600

750cd/Klm

100.000h

100.000h 94W=6/8kV125W=6/8kV187W=6/8kV SURGE

new2787

5˚5˚ 15˚15˚ 25˚25˚ 35˚35˚

45˚45˚

55˚55˚

65˚65˚

75˚75˚85˚85˚95˚95˚105˚105˚115˚115˚

300

600

900

1200

1500cd/Klm

EL FL FS

SUS

PENS

ION

Astro LED - UGR<22 - suspension

2786 Astro - UGR<22 - wide beam CLD CELL-D (1-10V) CLD CELLD-E LED (Tj=85°C)

wattage (700mA) colour weight code code W K - ølm 700mA - CRI

LED s. silver 11.10 330160-00 330160-0794 4000K - 12960lm - CRI 80

LED graphite 11.10 330164-00 330164-07LED s. silver 11.10 330161-00 330161-07

125 4000K - 17280lm - CRI 80LED graphite 11.10 330165-00 330165-07LED s. silver 12.00 330162-00 330162-07

187 4000K - 25920lm - CRI 80LED graphite 12.00 330166-00 330166-07

Emergency version: acc. 1175 (997658-00) to be purchased separately.On request: Astro with emergency wiring with centralized power supply CLD CELL-EC (sub-code -0050).

2787 Astro - UGR<22 - elliptical beamCLD CELL-D (1-10V) CLD CELLD-E LED (Tj=85°C)





187 4000K - 25920lm - CRI 80LED graphite 12.00 330176-00 330176-07

Emergency version: acc. 1175 (997658-00) to be purchased separately.On request: Astro with emergency wiring with centralized power supply CLD CELL-EC (sub-code -0050).

elliptical beam

Optics : in high-performance metallic V0 polycarbonate with micro-faceted fi nish.

Below are some examples of industrial environments requiring the installation of fi xtures with UGR<22 in compliance with standard UNI-EN 12464-1:• General areas inside buildings – stora-ge areas• Industrial and manufacturing activities• Chemical and pharmaceutical industry• Mechanical, electronic and electro-technical industry• Paper mills

Below are some examples of industrial environments requiring the installation of fi xtures with UGR<22 in compliance with standard UNI-EN 12464-1:• General areas inside buildings – stora-ge areas• Industrial and manufacturing activities• Chemical and pharmaceutical industry• Mechanical, electronic and electro-technical industry• Paper mills


362

163

24 LED

16 LED

12 LED

100

Ø46

2Ø

462

Ø46

2

32 LED

Ø51

2

IP66IK08

163

24 LED

16 LED

12 LED

32 LED

100

Ø46

2Ø

462

Ø46

2Ø

512

IP66IK08

SURGE

94W=6/8kV125W=6/8kV187W=6/8kV230W=6/8kV250W=6/8kV

1789

5°5° 15°15° 25°25°35°35°

45°45°

55°55°

65°65°75°75°85°85°95°95°

105°105°115°115°

150

300

450

600

750cd/Klm

new

SURGE

94W=6/8kV125W=6/8kV187W=6/8kV250W=6/8kV1788

5°5° 15°15° 25°25°35°35°

45°45°

55°55°

65°65°

75°75°85°85°95°95°105°105°115°115°

250

500

750

1000

1250cd/Klm

Ethr

Ethr

+40C° -40

+40C° -40

ENEC

ENEC

*80.000h

100.000hDALI

*80.000h

100.000h


1788 Astro - narrow beamCLD CELL-D (1-10V) CLD CELLD-E LED (Tj=85°C)





187 4000K - 25920lm - CRI 80LED graphite 12.00 330084-00 330084-07LED * s. silver 12.50 330082-00 330082-07

250 4000K - 34560lm - CRI 80LED * graphite 12.50 330085-00 330085-07

* 32 LED version with luminous flux maintenance 90%: 80.000h (L90B10). Emergency version: acc. 1175 (997658-00) to be purchased separately.On request: Astro with emergency wiring with centralized power supply CLD CELL-EC (sub-code -0050).

1789 Astro - wide beamCLD CELL-D (1-10V) CLD CELLD-E LED (Tj=85°C)







Optics : made of PMMA with high tem-perature resistance and UV rays.

CLD CELLD-D (DALI) CLD CELLD-DE LED (Tj=85°C)potenza (850mA) colour weight code code W K - ølm 850mA - CRI


LED graphite 11.10 330089-00 330089-07

* 32 LED version with luminous flux maintenance 90%: 80.000h (L90B10). Emergency version: acc. 1175 (997658-00) to be purchased sepa-rately.On request: Astro with emergency wiring with centralized power supply CLD CELL-EC (sub-code -0050).

LED AMBER

LED AMBER


363

163

24 LED

16 LED

12 LED

100

Ø46

2Ø

462

Ø46

2

32 LED

Ø51

2

IP66IK08 94W=6/8kV125W=6/8kV187W=6/8kV250W=6/8kV

SURGE 2785

new

5°5° 15°15° 25°25°35°35°

45°45°

55°55°

65°65°75°75°85°85°95°95°

105°105°115°115°

150

300

450

600

750cd/Klm

163

24 LED

16 LED

12 LED

100

Ø46

2Ø

462

Ø46

2

32 LED

Ø51

2

IP66IK08 94W=6/8kV125W=6/8kV187W=6/8kV250W=6/8kV

SURGE 2789

5˚5˚ 15˚15˚ 25˚25˚ 35˚35˚

45˚45˚

55˚55˚

65˚65˚

75˚75˚85˚85˚95˚95˚105˚105˚115˚115˚

400

800

1200

1600

2000cd/Klm

Ethr

Ethr

+40C° -40

+40C° -40

LOW

FLICKER

LOW

FLICKER

EL FL FS

*80.000h

100.000h

*80.000h

100.000h

SUS

PENS

ION


2785 Astro - wide beam - with polycarbonate diffuseurCLD CELL-D (1-10V) CLD CELLD-E LED (Tj=85°C)








2789 Astro - elliptical beamCLD CELL-D (1-10V) CLD CELLD-E LED (Tj=85°C)








Diffuser: Injection moulded, in V2 self-extinguishing, UV stabilized, van-dal-resistant clear polycarbonate, ideal for the food industry.

On request: version with diffuser in special polycarbonate material, ideal for the food industry with special pro-cessing methods.

Ideal version for warehouses and stora-ge shelving. To be used with acc. 538.

elliptical beam

food industry

LED AMBER

LED AMBER


Documents

358 Astro LED - suspension · Astro LED - suspension acc. 533 adjustable connector ... (UNI-EN 12464-1) recommends a speciﬁ c UGR value for different applications ranging between