6
® (Phone) 1-800-237-1326 7:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com ® C Frame & Mullion Doors “Northern Grown Hardwoods” Style 10 Frame Door Style 10 LP001 - 2x2 4 Lites Style 10 LP118 - 13 Lites Frame and Mullion Lite Pattern Options Lite Pattern Notes All lites will be evenly spaced unless otherwise noted. Additional design charg- es may apply for custom- er specified lite pattern configurations or place- ment. True divided lites are available for an addition- al upcharge. Style 10 LP001 - 2x4 8 Lites These examples show the detail of our half lap mullion con- struction, providing you with a stronger joinery option. This is standard for most stile and rail profiles that have matching mullion stock options. Half Lap Mullion Construction Style 10 LP118 - 9 Lites Most styles are available as a frame or mullion door. When ordering door styles 2500, 2505, 2525, 3500, 3535, 7000, 7010, 7020, 7030, 7040 and 7070 as mullions; we suggest that your lite pattern be no greater than 2 wide, due to the shape of the rails. (Those ordered with 3 or more lites in the width may require custom construction.) When ordering a mullion door please indicate the lite pattern configuration by using the format shown in the examples below. In most cases, standard placement for mullions shall be to equally divide the space. (If ordering equally divid- ed lites, the first number indicates the quantity of horizontal lites and the second number indicates the quantity of vertical lites.) The Frame and Mullion examples shown throughout this section are drawn at a width of 14" and a height of 28", unless otherwise noted. Custom placement of mullions is also available. Please provide a drawing for a quote. Mullion joinery is predominately a half lap construction and available with most stile and rail profiles that have matching mullion stock options. For mullion strips over 28", WalzCraft recommends applying a small bead of silicone between the back of the mullion and the glass to help assure stability and prevent possible warpage. This applies to standard lites only. Rubber Glass Retainer is available in Black, Brown, White & Clear. It is best to wait until you receive your frame to measure the actual opening size for your glass. If your project is time sensitive, our Customer Support Team may assist with calculating sizes to a tolerance of + / - 2mm. We do not calculate the glass size for true divided mullions or frames with multiple openings. Style 10 LP118 - 11 Lites Lite Pattern 118 Notes Specify the width and the height of the corner lites. The minimum size for corner lites is 2" x 2". Additional design charg- es may apply for custom- er specified lite pattern configurations or place- ment. True divided lites are available for an addition- al upcharge. Style 10 LP001 - 2x3 6 Lites

333_4777_12.1 Web Site - Wood Frame & Mullion Doors

Embed Size (px)

Citation preview

Page 1: 333_4777_12.1 Web Site - Wood Frame & Mullion Doors

® (Phone) 1-800-237-1326 7:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com® C

Frame & Mullion Doors “Northern Grown Hardwoods”

Style 10Frame Door

Style 10LP001 - 2x2

4 Lites

Style 10LP118 - 13 Lites

Frame and Mullion Lite Pattern Options Lite Pattern Notes

All lites will be evenly spaced unless otherwise noted. Additional design charg- es may apply for custom- er specified lite pattern configurations or place- ment. True divided lites are available for an addition- al upcharge.

Style 10LP001 - 2x4

8 Lites

These examples show the detail of our half lap mullion con-struction, providing you with a stronger joinery option. This is standard for most stile and rail profi les that have matching mullion stock options.

Half Lap Mullion Construction

Style 10LP118 - 9 Lites

Most styles are available as a frame or mullion door. When ordering door styles 2500, 2505, 2525, 3500, 3535, 7000, 7010, 7020, 7030, 7040 and 7070 as mullions; we suggest that your lite pattern be no greater than 2 wide, due to the shape of the rails. (Those ordered with 3 or more lites in the width may require custom construction.) When ordering a mullion door please indicate the lite pattern configuration by using the format shown in the examples below. In most cases, standard placement for mullions shall be to equally divide the space. (If ordering equally divid- ed lites, the first number indicates the quantity of horizontal lites and the second number indicates the quantity of vertical lites.) The Frame and Mullion examples shown throughout this section are drawn at a width of 14" and a height of 28", unless otherwise noted. Custom placement of mullions is also available. Please provide a drawing for a quote. Mullion joinery is predominately a half lap construction and available with most stile and rail profiles that have matching mullion stock options. For mullion strips over 28", WalzCraft recommends applying a small bead of silicone between the back of the mullion and the glass to help assure stability and prevent possible warpage. This applies to standard lites only. Rubber Glass Retainer is available in Black, Brown, White & Clear. It is best to wait until you receive your frame to measure the actual opening size for your glass. If your project is time sensitive, our Customer Support Team may assist with calculating sizes to a tolerance of + / - 2mm. We do not calculate the glass size for true divided mullions or frames with multiple openings.

Style 10LP118 - 11 Lites

Lite Pattern 118 Notes

Specify the width and the height of the corner lites. The minimum size for corner lites is 2" x 2". Additional design charg- es may apply for custom- er specified lite pattern configurations or place- ment. True divided lites are available for an addition- al upcharge.

Style 10LP001 - 2x3

6 Lites

Page 2: 333_4777_12.1 Web Site - Wood Frame & Mullion Doors

® (Phone) 1-800-237-1326 7:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com® C

Frame & Mullion Doors“Best in the Midwest!”

Mullion Lite Pattern Options

Style 1996 LP101 - 8 Lites

Style 1996 LP102 - 10 Lites

Style 10 LP100 - 5 Lites

LP103-L LP103-R LP104-R

LP103 is designed for use with Quarter Circle doors with an outside radius. The L and R indicate that the lite patterns are for doors with a left and right radius.

LP104 is designed for use with Quarter Circle doors with an inside radius. The L and R indicate that the lite patterns are for doors with a left and right radius.

Style 997RLP104 - 7 Lites

Style 996RLP103 - 7 Lites

Style 996L LP103 - 7 Lites

Style 997LLP104 - 7 Lites

LP104-L

Lite Pattern 100 Notes Minimum width for a frame with a Mullion Lite Pattern Option is 12". (Minimum is based on 2¼" stiles and rails.) Available for most Traditional GRF profiles with matching mullion stock options. Limitations apply to Mitered GRF profile options. Limitations apply to this mullion pattern and applied molding. A CAD drawing must be approved, prior to manufac- turing the product.

Lite Pattern 101 and 102 Notes

Minimum width for a frame with a Mullion Lite Pattern Option is 12". (Minimum is based on 21/4" stiles & bottom rail & top rail at narrowest.) Available for most Traditional GRF profiles with matching mullion stock options. Mitered GRF profile options are not avail- able. Limitations apply to this door style and applied molding.

Lite Pattern 103 and 104 Notes

Minimum width for a frame with a Mullion Lite Pattern Option is 12". (Minimum is based on 21/4" stiles, bottom rail and top rail at narrowest.) Available for most Traditional GRF profiles with matching mullion stock options. Mitered GRF profile options are not available. Limitations apply to this door style and applied molding.

Style 10 LP100 - (3) Patterns,

11 Lites

Lite Pattern 124 Notes Specify the width and the height of the corner lites. The minimum size for corner lites is 2" x 2". Available for most Traditional GRF profiles with matching mullion stock options. Limitations apply to Mitered GRF profile options.

A CAD drawing must be approved, prior to manu- facturing the product. Style 10

LP124 - 20 Lites

Lite Pattern 126 Notes Minimum width for a frame with a Mullion Lite Pattern Option is 12". (Minimum is based on 2¼" stiles and rails.) Diamond portion is a fixed size at 2" x 2". Height must be two times the width of the door. Available for most Traditional GRF profiles with matching mullion stock options. Limitations apply to Mitered GRF profile options.

A CAD drawing must be approved, prior to manufactur- ing the product.

Style 10 LP126 - 11 Lites

Page 3: 333_4777_12.1 Web Site - Wood Frame & Mullion Doors

® (Phone) 1-800-237-1326 7:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com® C

Frame & Mullion Doors “WalzCraft is a Premier Leader in the Industryfor Manufacturing Custom Products!”

Mullion Lite Pattern Options

Style 10 LP105 - (2)

Patterns, 12 Lites

LP105 and LP114 are designed to complement Gothic doors and can be used with Frame Groups

A1, A2, A3, A4, E1, E2 & E3.Height must be, equal to or greater than the width to allow one pattern or twice the width for a LP105 pattern on Top

& Bottom or LP114.

Style 10 LP105 - 7 Lites

Lite Pattern 105 and 114 Notes

Minimum width for a frame with a Mullion Lite Pattern Option is 12". (Minimum is based on 21/4" stiles and rails.) Available for most Traditional GRF profiles with matching mul- lion stock options. Limitations apply to Mitered GRF profile options. See our Web Site for availability. A CAD drawing must be ap- proved, prior to manufacturing the product.

Style 10 LP105 Over 2x2 Lites

11 Lites

Lite Pattern 111 Notes Minimum width for a frame with a Mullion Lite Pattern Option is 12". (Minimum is based on 21/4" stiles and rails.) Minimum height needs to be two times the width that is specified. Available for most Traditional GRF profiles with matching mullion stock options. Limitations apply to Mitered GRF profile options. See our Web Site for availability. A CAD drawing must be approved, prior to manu facturing the product.

Style 10 LP111 - (2)

Patterns, 7 Lites

Style 10 LP112 - 7 Lites

Style 10 LP111 - 4 Lites

Style 10 LP114 - 12 Lites

Drawn at: 12"W x 28"HDrawn at: 12"W x 28"H

Lite Pattern 112 Notes Minimum width for a frame with a Mullion Lite Pattern Option is 12". (Minimum is based on 21/4" stiles and rails.) Minimum height needs to be two times the width that is specified. Available for most Traditional GRF profiles with matching mullion stock options. Limitations apply to Mitered GRF profile options. See our Web Site for availability. A CAD drawing must be ap- proved, prior to manufacturing the product. Style 10

LP113 - 5 Lites

Lite Pattern 113 and 116 Notes

Minimum width for a frame with a Mullion Lite Pattern Option is 12". (Minimum based on 2¼" S & R's.) Available for most Traditional GRF profiles with matching mullion stock options. Limitations apply to Mitered GRF profile options. Limitations apply to this mullion pattern and applied molding. A CAD drawing must be ap- proved, prior to manufactur- ing the product.

Style 10LP116 - 5 Lites

Style 10 LP125 - 3 Lites

Style 10 LP125 - (2)

Patterns, 5 Lites

Lite Pattern 125 Notes Minimum width for a frame with a Mullion Lite Pattern Option is 12". (Minimum is based on 21/4" stiles and rails.) Available for most Traditional GRF profiles with matching mullion stock options. Limitations apply to Mitered GRF profile options. See our Web Site for availability. A CAD drawing must be approved, prior to manu facturing the product.

Page 4: 333_4777_12.1 Web Site - Wood Frame & Mullion Doors

® (Phone) 1-800-237-1326 7:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com® C

Frame & Mullion Doors“For a quote on your next project, call our Customer Support Team at 1-800-237-1326.”

Mullion Lite Pattern Options

Lite Pattern 115 Notes Minimum width for a frame with a Mullion Lite Pattern Option is 12". (Minimum is based on 2¼" stiles and rails.) Available for most Traditional GRF profiles with matching mullion stock options. Limitations apply to Mitered GRF profile options. Limitations apply to this mul- lion pattern and applied mold- ing. A CAD drawing must be approved, prior to manufac- turing the product.

Style 10LP115 - 7 Lites

Style 10LP115 - (2)

Patterns, 12 Lites

Style 10LP107 - (2)

Patterns, 7 Lites

Lite Pattern 107 and LP117 Notes

Minimum width for a frame with a Mullion Lite Pattern Option is 12". (Minimum is based on 21/4" stiles and rails.) Available for most Traditional GRF profiles with matching mul- lion stock options. Limitations apply to Mitered GRF profiles and applied mold- ing. See our Specification Catalog for pricing double patterns. A CAD drawing must be approved, prior to manufacturing the product.

Style 10LP117 - (2)

Patterns, 8 Lites

Style 10LP108 - 6 Lites

Lite Pattern 108 Notes Minimum width for a frame with a Mullion Lite Pattern Option is 12". (Minimum is based on 21/4" stiles & rails.) Opening height of the lite pattern must be specified. (Minimum height is 2".) Width of the lite pattern will be equal. Short pieces will be half of the height of the vertical pieces above it and have a “female” cut on the ends. Available for SR100, SR102 & SR107 “Traditional” GRF profile options. Available for MP609, MP611, MP612, MP724, MP726 & MP728 “Mitered” GRF Profile families.

Lite Pattern 110 Notes Minimum width for a frame with a Mullion Lite Pattern Option is 12" (Minimum is based on 21/4" stiles and rails.) Available for most Traditional and Mitered GRF profiles with match- ing mullion stock options. 1" between center lites with the remaining equal- ly divided to the outside.

Style 10 LP110 - 4 Lites

Style 10 LP109 - 4 Lites

This drawing shows the horizontal mullion strip

dividing the opening at an approximate

40/60 ratio.You must specify mullion location when ordering.

Lite Pattern 109 Notes

Specify the horizontal mullion strip placement from the top of the door to the top of the mul- lion strip for 3, 4 or 5 lite options. Additional design charges may apply for customer specified lite pattern configurations or placements that vary from the designs shown. True divided lites are available for an addi- tional upcharge.Style 10

LP109 - 3 Lites Style 10

LP109 - 5 Lites Style 40MUL

w/LP109 - 4 Lites

Style 40MUL Notes

Lite Pattern is ap- plied to the front face of a ¼" Veneered Flat Panel. A lite pattern must be specified for this style. Available with most “Traditional” stile and rail profiles that have matching mul- lion stock options. If ordering with the LP109 lite pattern, see placement guide- lines to the left.

This drawing shows the horizontal mullion strip

dividing the opening at an approximate

40/60 ratio.You must specify mullion location when ordering.

Page 5: 333_4777_12.1 Web Site - Wood Frame & Mullion Doors

® (Phone) 1-800-237-1326 7:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com® C

Frame & Mullion Doors “Where Custom Made Quality Begins” ®

To calculate Lite Pattern Pricing use the Frame Group price for the Door Style

selected from our Specification Catalog.

Add the standard per Lite cost, whether standard or true lites, in addition to the Lite Pattern Charge.

If using True Divided Lites, the multiplier would be 1½ times the Lite Pattern Charge.

Mullion Lite Pattern Options

Lite Pattern 121 and 122 Notes Minimum width for a frame with a Mullion Lite Pattern Option is 12". (Minimum is based on 2¼" stiles and rails.) Corner lites must be specified at the widest and narrowest, which will determine the radius of the curved piece. (The minimum at the nar- rowest is 2".) Available for most Traditional GRF profiles with matching mullion stock options. Limitations apply to Mitered GRF profile options. See our Web Site for availability.

Style 10 LP121 - 4 Lites

Style 10LP121 - (2)

Patterns, 7 Lites

Style 10 LP122 - 6 Lites

Style 10LP122 - (2)

Patterns, 9 Lites

Lite Pattern 119 and 120 Notes Minimum width for a frame with a Mullion Lite Pattern Option is 12". (Minimum is based on 2¼" stiles and rails.) Corner lites must be specified at the widest and narrowest, which will determine the radius of the curved piece. (The minimum at the nar- rowest is 2".) Available for most Traditional GRF profiles with matching mullion stock options. Limitations apply to Mitered GRF profile options. See our Web Site for availability.

Style 10 LP119 - 3 Lites

Style 10LP119 - (2)

Patterns, 5 Lites

Style 10 LP120 - 4 Lites

Style 10LP120 - (2)

Patterns, 6 Lites

Style 2000LP106 - 9 Lites

Lite Pattern 106 Notes Minimum width for a frame with a Mullion Lite Pattern Option is 12". (Minimum is based on 2¼" stiles, bottom rail and top rail at narrow- est.) The minimum size for corner lites is 2" x 2". Specify Width and Height of the Corner Lites. Available for most Traditional GRF profiles with matching mullion stock options. Mitered GRF profile options are not available. Limitations apply to this door style and applied molding.

Page 6: 333_4777_12.1 Web Site - Wood Frame & Mullion Doors

® (Phone) 1-800-237-1326 7:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com® C

Frame & Mullion Doors“More design options from WalzCraft!”

Mullion Lite Pattern Options

Minimum Width using standard 2¼" Stiles

Style 3020Frame Group: C1

LP123 - 8 Lites

To calculate Lite Pattern Pricing use the Frame Group price

for Door Style 3020 from our Specification Catalog.

Add the Applied Molding Charges.

Add the Standard per Lite cost, in addition to the Lite Pattern charge.

True Divided Lites are not available.

Minimum Width using standard 2¼" Stiles

Style 3020Frame Group: C1LP123 - 10 Lites

Width dimensions for the LP123 Lite Patterns are limited to fi xed sizes, due to their complexity. Heights may vary. Minimum Width dimensions are based on 2¼" Stiles and vary given the number of lites per opening. Beneath each drawing we depict the minimum width, standard stile size and the number of lites that will accommodate that frame size. When ordering sizes that range between one of two templates, the frame must be constructed with non-standard part sizes to maintain the mullion template size. You may increase the size of the stiles on the frame with fewer lites, or decrease the size of the stiles on the frame with the greater number of lites. If ordering a mullion door 12½" wide, you will need 2½" stiles. The top and bottom rails may also be increased by the same value to maintain aesthetics and balance proportions. LP123 mullions are only constructed with the SR100 Stile & Rail Profi le and Applied Molding #101 or #102, with the #1895 Mullion Stock. Limited to the following Outside Edge Profi les: D7, D12, D15, D17, D18, D21, D24, D32, D41, D52, D67, D93, D101, D102, D115, D118 and D120.

Minimum Width using standard 2¼" Stiles

Style 3020Frame Group: C1LP123 - 10 Lites

Minimum Width using standard 2¼" Stiles

Style 3020Frame Group: C1LP123 - 10 Lites

Minimum Width using standard 2¼" Stiles

Style 3020Frame Group: C1LP123 - 10 Lites