30S316-H2S

PHILLIPS 66 COMPANY PHILTEX/RYTON COMPLEX PIPING SPECIFICATION

PHILTEX/RYTON COMPLEX PIPING SPECIFICATIONSPECIFICATION NUMBER: 30S316-H2S

FILLIN \* MERGEFORMAT

QUOTE \* Upper \* MERGEFORMAT

FILLIN \* MERGEFORMAT

SERVICE: ASME CLASS 300 HYDROGEN SULFIDE (316 STAINLESS STEEL) (21)

DATE: 6/9/04

MINIMUM C/A: 0" (38)MIN NDE: 100%MAXIMUM HARDNESS: N/ASTRESS RELIEF: NOHYDROSTATIC TESTING: YES (20)

PRESSURE/TEMPERATURE LIMITATIONS: ASME CLASS 300 (NOT FOR CONTINUOUS SERVICE BELOW - 150 ) MEETS CODE(S): ASME B31.3COLOR: N/A

PHILTEX/RYTON SPEC

SIZE & 11 23468101214161820-24

FLANGES

(19) (30) (1)(35)

ASME FORMDROPDOWN

A182 F316/316L RF

SW PRF'D WN - SCH 40S

SE DO NOT USE

A182 F316/316L RF

WN PRFD / S0

WN SCH 10SA182 F316/316L RF WN PRFD / SO

WN SCH 10S

FITTINGS

ELL, TEE,

RED, CAP

(1)SW - A182 F316/316L 3000# PRF'D

SE - DO NOT USE

BW- A403 WP316/316L SCH 40S

A403

WP316/316L

SCH 10S

A403 WP316/316L

SCH 10S

CPLGS-

INLINE

(1)SW - 182 F316/316L 3000#

SE - DO NOT USE

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

BRANCH CONNECTUSE THE TABLE IN SECTION 3.6 OF THE APPPLICATION GUIDELINES

PIPE

SIZE & 11 23468101214161820-24

NIPPLE (5)

(17)(38)A312 TP316/316L

SE- DO NOT USE

FORMTEXT

SW- SCH40SSMLS


SE

(5)DO NOT USE


BW / SW

(5)A312 TP316/316L

SCH 40S

SMLSA312 TP316/316L SCH 10SEFW

A312 TP316/316L SCH 10SEFW

WELDOLET & BW ELBOLET ( 2 INA182 F316/316L SCH 40SBOLTING MATERIALA193 B7M STUD WITH GREEN XYLON 1014 OR 1424 COATING. PRF'D

A 193 B8M CLASS II STUD BOLTS

NEVER MIX B7M & B8M.

WELDOLET & BW ELBOLET 3 IN 6 INA182 F316/316L SCH - 10SNUTSA194 2H HEAVY HEX NUTS WITH GREEN XYLON 1014 OR 1424 COATING PRF'D. USE COATED ONLY WITH COATED BOLTS.

SOCKOLET & SW ELBOLETA182 F316/316L 3000#GASKETS(1)CORRUGATED 316SS W/GRAPHITE PRFD. IDT WD-20, J M CLIPPER ELASTOGRAPH, GARLOCK GRAPHONIC ALL ACCEPTABLE.

(2)IN AREAS WHERE GRAPHONICS GASKETS WILL NOT ACCOMMODATE FLANGE CAP USE SPIRAL WOUND 316 SS WITH GRAPHITE FILL

(3)USE GRAPHONICS WITH NICKEL 200 AT RYTON

PLUGS, SOLID, ROUND HEADA182 F316/316L (15)TUBING (1/2 & SMALLER) SMLS 316 STAINLESS STEEL ( .035 WALL)

BUSHINGSA182 F316/316L (16)SWAGELOK TUBING FITTINGS 316 STAINLESS STEEL

UNIONSSW -A182 F316/316L3000# - FLANGES PRF'DTHREAD COMPOUNDRECTORSEAL / GLADIATOR PASTE / VIRGIN TEFLON PRFD

SWAGE NIPPLE FOR ( 2 IN PIPEA403 WP316/316L SCH 80THERMOWELL CONNECTIONSOCKOLET / SW ELBOLET PRF'D or FLANGED316 SS THERMOWELL PRF'D

Philtex/Ryton Mechanical Design Engineering must approve any exceptions to these specifications for any job on a case-by-case basis.30S316-H2SREV: 2

PHILTEX/RYTON COMPLEX PIPING SPECIFICATIONSPECIFICATION NUMBER: 30S316-H2S

SERVICE: ASME CLASS 300 HYDROGEN SULFIDE (316 STAINLESS STEEL) (21)DATE: 6/9/04

Valves listed below are preferred Consult the Phillips Engineering Standards for the other acceptable alternatives.

Orbit valves are considered a specialty item consult engineering.

SIZE -1 23468 1214 - 24

GATE

OS&Y

BODY MATERIAL

TRIM MATERIAL

PACKING MATERIAL

BONNET CONSTRUCT

END CONNECTION

NOTESA182 F316/316L (800#) 316 SS HF

GRAPHITE (23)

WELDED / BOLTED- B7M W/2HM NUTS FE

API 602 (6)

A351 CF8 316 SS HF

GRAPHITE (23)BOLTED- B7M W/2HM NUTSFEAPI 600

CHECK

(14) (25)BODY MATERIAL

TRIM MATERIAL

SPRING MATERIAL

END CONNECTION

NOTESA182 F316/316L

316 SS HF

INCONEL X-750

FE

(800#)

A351 CF8 316 SS

INCONEL X-750FEWATER

BUTTERFLY

FIRESAFE

API 607

API 609

(25)BODY MATERIAL

TRIM MATERIAL

PACKING MATERIAL

END CONNECTION

NOTESUSE BALL VALVEA351 CF8 316 SS

GRAPHITE (23)FEWAFER DOUBLE OFFSET (MIN.)

BALL

FIRESAFE

API 607

API 608

BODY MATERIAL

TRIM MATERIAL

PACKING MATERIAL

SEAT MATERIAL

END CONNECTION

NOTESA182 F316/316L

316 SS

GRAPHITE (23)

GLASS FILL TEFLON

FE

(6)JAMESBURY 5300-31-3600XTA351 CF8 316 SSGRAPHITE (23)GLASS FILL TEFLONFEJAMESBURY 5300-31-3600XT

PLUG

FIRESAFE

API 607

BODY MATERIAL

PLUG MATERIAL

SLEEVE MATERIAL

END CONNECTION

NOTESA351 CF8

316 SS

TEFLON

FE

A351 CF8 316 SSTEFLONFE

GLOBE

OS&Y

BODY MATERIAL

TRIM MATERIAL

PACKING MATERIAL

BONNET CONSTRUCT

END CONNECTION

NOTESA182 F316/316L (800#) 316 SS HF GRAPHITE (23)

BOLTED

FE

A351 CF8 316 SS HFGRAPHITE (23)BOLTEDFE

Notes:

(1) Use socket weld fittings except in areas where welding is not permitted.

(5) All first take-off piping thread nipples to 1 to first block valve shall be schedule 80 and stamped 80.

(6) Atmospheric vent and drain valves must be 1.

(14) Use only spring loaded check valves in vertical lines. Do not install any check valve with normal flow direction being down.

(15) No hexagonal head or hollowed out plugs allowed.

(16) Bushings to be a minimum of two size reductions. Use only on instruments takeoffs downstream of block valve.

(17) No all thread nipples allowed.

(19) Although one may be preferred over the other, slip-on flanges and weld neck flanges are interchangeable.

(20) If hydrotesting with water, the chloride content must be less than 250 ppm.

(21) Stainless steel 316L is acceptable substitutes for stainless steel 316.

(23) Valves shall have die formed graphoil rings with braided graphite wiper ring top and bottom with corrosion inhibitor

(25) Equipment installed between flanges, i.e., wafer butterfly and check valves and some control valves, requires fire insulation or shielding of the flange bolts.

(30) Locate flanges in horizontal lines where possible.

(35) For slip-on flanges, leave a 1/4" gap on the back weld or drill an 1/8" hole from the backside to the bore for hydrogen gas to escape.(38) If C/A of 1/16" is needed, all screwed piping 1/2" - 1 1/2" shall be schedule 80 or 80S.

Documents

30S316-H2S