77

MA

GN

ET

IC C

ON

TA

CT

S

SENTROL 1.800.547.2556

MA

GN

ET

IC C

ON

TA

CT

S

3000 Series

Recessed RollerPlunger WithWire Leads

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.50"3.81 cm

1.188"3.02 cm

1.50"3.81 cm

1.75"4.45 cm

0.750"1.905 cm

Flange thickness 0.050"

Models 3002, 3003, 3004

ULLISTED

ULLISTED

3008 “Shorty”• Short housing (3/4") fits in tight quarters• Ideal for replacing short mechanical

switches• Flow-through design to ensure opera-

tion in dirty environments

3002, 3003, 3004, 3005, 3006, 3007• Versatile; three different mounting

configurations• Ideal for residential doors• Works as plunger or ball switch• Flanges for reliable, positive retention• Spacers, mounting screws included

ORDERING Closed Open S.P.D.T. LeadINFORMATION Loop Loop Type

Short Roller Plunger Contact 3008 1 foot#22 wire

Roller Plunger Contact 3002 3003 3004 1 foot#22 wire

Roller Plunger Contact 3005 3006 3007 1 foot#22 wire

NOTE: Specify white or mahogany brownSelected models available in whiteFor Accessories, see page 108Protected by U.S. patent 5,155,460

Roller/Plunger

Not to scale

Not to scale

ULLISTED

1.50"3.81 cm

1.188"3.02 cm

1.50"3.81 cm

1.75"4.45 cm

0.750"1.905 cm

Flange thickness 0.050"

Models 3005, 3006, 3007

0.750"1.905 cm

0.050"0.127 cm

0.800"2.03 cm

0.20" (0.635 cm)

1.20"3.05 cm

FRONT VIEW

0.750"1.905 cm

SIDE VIEW

New Improved Design!

6.32

SENTROL 1.800.547.2556

MA

GN

ET

IC C

ON

TA

CT

S

3040/3050 Series

Panic Switch WithTerminals

• Mounts underneath or on side of desk orcounter; difficult to detect

• Smooth housing prevents accidentaldamage to clothing

• Actuating lever designed to accommodateonly tip of finger

• Reed contacts reset when lever is inclosed position

• Latching LED indicates when switch isactivated; LED powered by 12 VDC24 hour switchable power or equivalent

• SPDT output for electrical compatibility

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

R

1.77"4.50 cm

0.76"1.93 cm

2.90"7.37 cm

Not to scale

Special Purpose

ORDERING S.P.D.T. LeadINFORMATION Type

Bill Trap 3555 6" VinylJacketed

NOTE: Black only

• Hidden installation in bottom of cashregister drawer; removing all the moneyfrom the tray trips the switch—withoutthief knowing

• Hermetically sealed and epoxy-embedded reeds resist moist, dustyenvironments, shock and vibration forfewer false alarms

• Highly stable Alnico V magnet indurable plastic housing; long life andfewer service calls

• Compact and self-adhering (no drilling);simple installation

3555 Series

Bill Trap With VinylJacketed Leads

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Not to scale

3.375"8.65 cm

0.375"0.96 cm

0.25"0.64 cm

2.563"6.57 cm

ULLISTED

ULLISTED

ULLISTED

ORDERING S.P.S.T. S.P.D.T. LED Latching LeadINFORMATION LED Circuit Type

Surface Mount Panic Switch

3040— • Red Yes Screw Terminals

3045 • None No Screw Terminals

3050— • Bi-Color Yes Screw Terminals

3055 • Bi-Color No Screw Terminals

Panic Switch Cold Temp.

3040CT— • Red Yes 12 ft Jacketed

3045CT • None No 12 ft Jacketed

NOTE: White only

S E N T R O LP R O D U C T I N F O R M A T I O N B U L L E T I N

5812NT SERIESACOUSTICGLASSBREAK SENSORShatterPro™ 3Model numbers:5812NT, R5812NT, 5815NT, R5815NT

The Sentrol 5812NT Series ShatterPro™ 3 is the

latest breakthrough in Sentrol’s advanced series of

acoustic glassbreak sensors. In independent lab tests,

Sentrol's ShatterPro 3 provides 25 percent better false-

alarm immunity than industry-leading glassbreak

sensors. The coverage pattern can be easily adjusted

to fit small or large rooms. Interference outside the

range will not cause false alarms.

The ShatterPro 3 detects in a full 360°-coverage

pattern, with a maximum 25’ (7.5m) radius from sensor

to glass.

Using Sentrol’s patented Pattern Recognition Tech-

nology, the sensor listens for actual patterns of break-

ing glass while eliminating most false alarm patterns.

ShatterPro 3 listens across the glassbreak frequency

spectrum for greater false alarm immunity.

Available with a round or rectangular housing,

ShatterPro 3 can be tested without opening the sensor

by activating the Sentrol hand-held glassbreak tester at

close range. A simple hand clap feature lets end-users

confirm at any time that the ShatterPro 3 is operational.

• 25 percent better false alarmimmunity than industry leaders*

• Adjustable to room size

• All-new, easy-accessdesign

• End-user can test sensor opera-tion with a clap of the hands

• Alarm Memory

*Wyle Labs Glassbreak Testing, May 2000

continued

©2001 Interlogix, Inc.

Interlogix reserves the right to change specifications without notice.

ShatterPro and ShatterPoint are trademarks of Interlogix, Inc.

12345 SW Leveton Dr. Tualatin, OR 97062PH 503.692.4052 FX 503.691.7566 www.interlogixinc.comUSA & Canada: 800.547.2556Technical Service: 800.648.7424FaxBack: 800.483.2495

.81"2.1 cm

4.0"

10.2

cm

4.0"

10.2

cm

Sentrol 5812NT Series ShatterPro™ 3Specifications:

ElectricalInput voltage ........................................................ 9 to 16VDCCurrent:

Typical ........................................................................ 15mAMaximum .................................................................... 25mA

Electrical configuration ................................. Form A, Form CField wiring size ........................................................ 18 AWGRelay rating .................................................. 16V, 50mA max.Detection range ........................... 3'-25' (0.9 m-7.6 m) x 360°Alarm response............................................................. 4 sec.

FeaturesMinimum glass size ................... 12" x 24" (30.5 cm x 61 cm)Recommended glass thickness:

Plate ....................................... 3/32"-1/4" (2.4 mm-6.4 mm)Tempered ................................. 1/8"-1/4" (3.2 mm-6.4 mm)Wired ............................................................. 1/4" (6.4 mm)Laminated ................................ 1/8"-1/4" (3.2 mm-6.4 mm)

EnvironmentalOperating temperature .......................... 32°-122°F (0°-50°C)Relative humidity ............................. 10-90% non-condensing

DimensionsRound housing

Depth ............................................................ 0.81" (2.1 cm)Diameter ....................................................... 4.0" (10.2 cm)

Rectangle housingDepth ............................................................ 0.81" (2.1 cm)Width ............................................................ 2.75" (7.0 cm)Height ......................................................... 4.52" (11.5 cm)

Color ...............................................................................white

Listings ................................................................... UL, C-UL

Dimensions

5812NT5815NT

G-4205-st2.5K-0201

Ordering Information

.81"2.1 cm

2.75"7.0 cm

4.52

"11

.5 c

m

4.52

"11

.5 c

m

R5812NTR5815NT

Model Number Description Color

5812NT ShatterPro 3 with rectangular housing, Form A White

R5812NT ShatterPro 3 with round housing, Form A White

5815NT ShatterPro 3 with rectangular housing, Form C, tamper switch White

R5815NT ShatterPro 3 with round housing, Form C, tamper switch White

Accessories

5709C Glassbreak hand-held tester White

Mounting Location

Ceilingmount

Wallmount

25' (7.6 m)max.

25' (7.6 m)max.