300 OC Aluminium Top HOTPLATES - sklep.genos.com.plsklep.genos.com.pl/sklep2/zalaczniki/zalacznik962.pdf · 137 Large HOTPLATES Hotplate With Wattage Power Control Or Digital PID

135

HHOTPLATES300OC Aluminium Top

HOP-2525250x250mm hotplate



HOP Serie Aluminium Top Hotplates Features: Chemical resistant top plate, easy to clean. Excellent heat conduction distributes the heat evenly and uniformity over the entire heating surface. Sensitive “stepless” temperature control is maintained by means of a hydraulic thermostat with minimum overshoot and undershoot Making possible the processing of delicate materials at low critical temperatures. Pilot lamp indicates when heat is on. Special radiation shields keep apparatus relatively cool during continuous operation. Supplied with a 3-wire line cord and sturdy screw type support device at the rear of the base to hold standard rod.

Application: Distillations, extractions and digestions Heat aqueous reagents Semiconductor baking Acid/Base digestions - trace metal analysis. etc. Sample drying General reagent heating Heating TLC plates Evaporations Warning/curing applications - pastes, adhesives, and solder Ideal for general lab heating Liquid evaporations

Model Temperature range Top plate Dimensions Watt Weight

HOP-1212 40-300°C 115x115mm W140xH110xD220mm 450W 1.2kg




support device at the rear of the base to hold standard rod.

Hop-1818Back Panel

!"#$%&'()*+"!,'*+'*'-)*.$!*/0)'1%"2)3

This modern range of aluminium hotplates provides

superior temperature uniformity and stability is

available in 4 sizes.

HOP-1212

Compact and lightweight hotplate, great to use in

limited space.

Making possible the processing of delicate materials at

low critical temperatures.

45)2"62*+"$!.7

300OC300OC

HOP-2550

136

HOTPLATES Digital & Programmable

HOP-D Serie Digital & Programmable Hotplates, Aluminium TopApplication: Distillations, extractions and digestions Heat aqueous reagents Semiconductor baking Acid/Base digestions - trace metal analysis. etc. Sample drying General reagent heating Heating TLC plates Evaporations !"#$%$&'()#%$&*"++,%("-%.$/0+"/-1/2*"341/%51/2*6*/.,31# Viscosity studies Reaction optimization Solubility studies Safety thermostat

Features:

Temperature can be displayed in °C or °F.

Digital timer and ramp to temperature function.

Digital set-point and read-out of actual temperature.

PID microprocessor Eurotherm 2132 controller provides

precise temperature regulation all over the temp. range,

include the low temp close to the ambient.

Temperature may be controlled either at the plate surface by

internal sensor,or at the sample by a Thermocouple

Immersion probe.

Safety: in the event of broken sensor,power to the heater is

shut-down.

Temperature range :above ambient to 300°C.

Chemical resistant top plate, easy to clean.

Excellent heat conduction distributes the heat evenly and

uniformity over the entire heating surface.

Pilot lamp indicates when heat is on.

Special radiation shields keep apparatus relatively cool

during continuous operation.

HOP-2525D250x250mm Hotplate



Hop-1818DBack Panel

HOP-2550DLarge surface for large loads, 500x250mm Hotplate

Support device at the rear of the base External sensor input Safety thermostat External/internal sensor switch.

Model Temp. range Top plate Temp. stability Dimensions Watt Weight

HOP-1212D 40-300°C 115x115mm ±1° W140xH110xD220mm 450W 1.3kg




3216CP Optional Temperature programmer

45)2"62*+"$!.7

External temp. sensor 200mm length, 3.2mm diameter. Optional: Communicator 3216 Com. Optional: Optional Temperature programmer.

300OC300OC

H

137

HOTPLATESLarge

Hotplate With Wattage Power Control Or Digital PID Control

HOP-5843

HOP-6116-1

CERAN® Hot Plate With Thermostatic Temp. Control 50-500°C (Optional Digital Control)

CERAN® an unusual glass ceramic material which is highly

resistant to breakage and temperature changes, free from

distortion, permeable to ultra-violet light and highly acid-

resistant. Construction: The low mass CERAN® plate is

electrically heated over its full surface and is bedded into a

stainless steel frame which is mounted on an internally

insulated stainless steel housing. The temperature control

system consists of an electronic regulator, activated by a

NiCr-Ni temperature sensor (adjustable 50 ... 500°C) installed

in a aluminium pressure-cast housing. Warm-up time, e. 9".

500°C in 8 minutes. Four feet, which CERA-4328

Series A - with built-in control housing, Series SR - with separate control housing

WeightVoltWattCERAN® mmWxHxD(mm)Types

5.0kg230V AC1500430x140440x100x300CERA-4314

5.5kg230V AC2000280x280290x100x410CERA-2828

6.5kg230V AC3000280x430290x100x560CERA-4328

9.0kg3x400V, N+PE4400430x430440x100x560CERA-4343

11.5kg3x400V, N+PE5700580x430590x100x560CERA-5843

can be individually adjusted to an approx. height of 8 mm to ensure horizontal stability.

78+1*9:*4"/*9*/)++.#-%$&*#.3*4.,31#/*;3%/-"$(1*<==*>>?*@$*78+1/*AB*6*CD2*-41*1,1(-#%(",*(.$$1(-%.$*

E1-F11$*-41*(.$-#.,*4.)/%$&*6*-41*4.-*+,"-1*%/*+#.-1(-13*E8*"*G1H%E,1*>1-",*4./1I

370OC370OC

500OC500OC

Electrical hot plates with variable wattage control.

Robust construction for continuous performance.

Aluminium alloy hotplate. Because of the asymmetrical, long-

term heating system (hotplate corners and edges are subjected

to more heat) an even temperature is guaranteed over the

entire heating surface. Asbest-free insulation. The housing

is constructed from high-grade, stainless steel No. 1.4301,

whereby the central section has been additionally sprayed in

orange. Four adjustable feet ensure extra stability. Connecting

cable approx. 1,7 m. long, 230 Volt/ 3200 Watt with plug.

Option: Digital temp. controller.

Type Temp. Range Top Plate Dimen.(mm) DimensionsW (mm) Watt Volt Weight

HOP-3030 max. 370°C 300x300 W300xH312xD 300 1800

230

10kg

HOP-3535 max. 370°C 350x350 W350xH358xD350 2200 12kg


HOP-5035 max. 370°C 500x350 W350x H364xD350 2850 18kg


HOP-6116-1 30~110°C610x160 W610xH170xD160

1000220 11kg

HOP-6116-3 50~300°C 2000

H

138

H HOTPLATES

Electrical sandbaths with variable wattage control. Option:

Digital temp. controller. Robust construction for

continuous performance. Aluminium alloy hotplate. Because of

the asymmetrical, long-term heating system (hotplate corners

and edges are subjected to more heat) an even temperature

is guaranteed over the entire heating surface. The sandbaths

consist of an aluminium alloy hotplate with a screwed-on,

sealed stainless steel frame with a usable height of 50 mm.

The sand lays direct of the hotplate.

The housing is constructed from

high-grade, stainless steel No.1.4301,

whereby the central section has been

additionally sprayed in orange. 4 adjustable feet ensure extra

stability. Connecting cable approx. 1,7 m long, 230 Volt/3200

Watt with plug.

Incinerator/Sand

SOD-3636

Sand Baths Up To 370oC

Type Temp. Hotplate WxHxD(mm) Watt Volt Weight

SOD-3636

Max.

370°C

360x360 360x220x360 2200 230 13 kg

SOD-5136 510x360 360x220x510 2850 230 21 kg

SOD-5843 580x430 440x220x590 4000 230 27

Ashing & Burn Off Hotplate Furnace Up To 950oC

J.#*/%$&,1*"$3*/1#%1/*%$(%$1#"-%.$*.K*/.,%3*6*,%L)%3*/)E/-"$(1/I*

The operating temperature of approx. 950°C can be reached

within the space of a few minutes. The upper platform has 8

recesses with a diameter of 35 mm which can accommodate

porcelain crucibles of up to 50 mm diameter for drying,

+#1041"-%$&*6*K)>%$&0.KKI*741*)$%$4%E%-13*1H+./)#1*-.*.H8&1$*

speeds up the incineration process. The inclined position of

the crucibles in the lower incinerating bed (which has a length

of 400 mm) allows excellent observation and access to the

contents during operation. Modern design, easy to operate,

reliable, space-saving and of very good value.

HOF-604A/D

Model HOF-604A analog HOF-604D digital

Voltage 230-240V, 50/60Hz

Performance 2500 Watt

Width & Depth 450mm x 180mm

Height 310mm

Maximum crucible diameter 50mm

Maximum crucible height 50mm

Weight 8kg 7.8kg

Model HOF-604A: The upper part and the main housing are

made of highgrade stainless steel, the housing comes with an

.#"$&1*M$%/4*;B:N*O==O?I*741#1*%/*1,1(-#%(",*

F"--"&1*(.$-#.,I*741*"++,%"$(1*%/*M--13*F%-4*"*/"K1-8*/F%-(4*F4%(4*()-/*.KK*-41*>"%$/*/)++,8*-.*-41*41"-1#*

%>>13%"-1,8*-41*/1#5%(1*G"+*%/*.+1$13I*!41$*-41*G"+*%/*(,./132*+.F1#*%/*#1/-.#13*-.*-41*1,1>1$-I*

741*#1"380-.0)/1*"++"#"-)/*%/*31,%51#13*(.>+,1-1*F%-4*"*<IP*>*("E,1*6*A(4)Q.*+,)&I

Model HOF-604D: As SVR/E, but with an additional Eurotherm PID temperature controller up to 999°C, this is controlled by a

built-in,K type thermo couple. The pre-selected temperature is shown on the digital display with a constant ACTUAL temp.

950OC950OC

370OC370OC

139

HHOTPLATE/STIRRERSCeramic Top

HSCD-4Digital hotplate stirrer

Model Temp. range Top-plate Temp. control Magnetic stirrer

HPC-4 up to 500 °C 175x175mm Analog No

HPCD-4 up to 500 °C 175x175mm Digital No

HSC-4 up to 500 °C 175x175mm Analog 100~1200rpm

HSCD-4 up to 500 °C 175x175mm Digital 100~1200rpm

Features: High impact strength Acid and alkali resistance Heats rapidly up to 540°C in 8 minutes Stepless heat control Ceramic top remains perfectly flat to ensure maximum heat transfer. Reflective white top makes sample viewing easy. Not recommended for use with metal vessels.

Applications: Models are excellent for microscale chemistry R1$1#",*,"E*41"-%$&6/-%##%$& Sample drying Media preparation General microbiological applications

HPC-4 & HSC-4, Analog Models

HPCD-4 & HSCD-4, Digital ModelsMeasures Temperature on Plate or in Sample

Features: Microprocessor closed-loop control Digital display of all parameters for easy operation. Temperature can be displayed in °C or °F PID microprocessor Eurotherm 2132 controller provides precise temperature regulation all over the temp. range, include the low temp close to the ambient. Temperature may be controlled either at the plate surface by internal sensor,or at the sample by a Thermocouple Immersion probe. B">+*#"-1*-.*/1-+.%$-*6*-%>1#

Description: Solid state feedback control monitors and adapts to sudden changes in ambient or sample temperature, preventing boil-overs, ruined samples, and lost time. Digital display for quick and easy observation. S#15%.)/*/1-*+.%$-*%/*/-.#13*%$*>1>.#8*6*F%,,*"++1"#*.$*-41* display when the unit is switched on.

3216CPOptional programmer

3216 comOptional communication

HSC-4Analog Hotplate stirrer

HPC-4Analog Hotplate

support device at the rear of the base to hold standard rod

Back Panel - Analog Models

Back Panel - Digital ModelsSupport device at the rear of the base 8 External sensor input 8 Safety thermostat 8 External/internal sensor switch

500OC500OC

140

H HOTPLATE STIRRERS Aluminium Top

HS-Serie Hotplate Mgnetic Stirrers1$9)%#:0'4+"%%"!,'*!;' !"#$%&'()*+"!,3Quiet direct drive motor/magnet system provides speed from 100 to 1200 RPM.

Features:


Excellent heat conduction distributes the heat evenly and uniformity over the entire heating surface.

Sensitive “stepless” temperature control is maintained by means of a hydraulic thermostat with minimum overshoot

and undershoot Making possible the processing of delicate materials at low critical temperatures.


Special radiation shields keep apparatus relatively cool during continuous operation.

Supplied with a 3-wire line cord and sturdy screw type support device at the rear of the base to hold standard rod.

Uniform, stable heating

Designed for continuous use, to handle fluids of varying viscosities in up to 25liter capacity

Available in 4 models to accommodate most laboratory applications requiring mixing and temperature control.

Gentle or vigorous stirring

HS-1 T.>+"(-*6*,%&4-*F1%&4-2*&#1"-*-.*)/1*%$*,%>%-13*/+"(1*****GHS-5 For large capacity up to 25 liter, stir viscous solution

Applications:

Warming/mixing applications - gels, pastes, and adhesives

Standard reagent mixing and heating

Preparing culture media

Evaporation and distillation procedures

Titrations requiring heating and stirring of solution

Gentle heating

Microscale chemistry

R1$1#",*,"E*41"-%$&*6*/-%##%$&

Sample drying

Media preparation

General microbiological applications

Model Temp. range Speed range Capacity max. Top plate Dimensions Watt Weight

HS-1 40-300°C 100-1200rpm 8 Liter 115x115mm W140xH110xD220mm 450W 1.9kg

HS-4 40-300°C 100-1200rpm 10 Liter 175x175mm W200xH150xD260mm 750W 3kg

HS-5 40-300°C 100-1400rpm 20 Liter 175x175mm W200xH150xD260mm 1500W 3.4kg

GHS-5 40-300°C 100-1400rpm 25 Liter 250x250mm W250xH150xD260mm 3000W 4.4kg

support device at the rear of the base to hold standard rod

Back panel

GHS-5 HS-4 HS-1

45)2"62*+"$!.7

300OC300OC

141

HHOTPLATE STIRRERSDigital & Programmable

Application:

Warming/mixing applications -

gels, pastes, and adhesives.

Standard reagent mixing and

heating.

Preparing culture media.

Evaporation and distillation

procedures.

7%-#"-%.$/*#1L)%#%$&*41"-%$&*6*

stirring of solution.

Gentle heating.

Microscale chemistry.

*R1$1#",*,"E*41"-%$&*6*/-%##%$&I*

Sample drying.

Media preparation.

*General microbiological applications.

Features:

Temperature can be displayed in °C or °F.

Digital timer and ramp to temperature function.

Digital set-point and read-out of actual temperature.

PID microprocessor Eurotherm 2132 controller provides

precise temperature regulation all over the temp. range, in

clude the low temp close to the ambient.

Temperature may be controlled either at the plate surface by

internal sensor,or at the sample by a Thermocouple

Immersion probe.

Safety: in the event of broken sensor,power to the heater is

shut-down.

Temperature range :above ambient to 300°C.


Excellent heat conduction distributes the heat evenly and

uniformity over the entire heating surface.


Special radiation shields keep apparatus relatively cool during

continuous operation.

Designed for continuous use, to handle fluids of varying

viscosities in up to 25liter capacity.

Available in 4 models to accommodate most laboratory

applications requiring mixing and temperature control.

Gentle or vigorous stirring.

Back panel

HSD-Serie Digital Magnetic Stirrers

Support device at the rear of the base

External sensor input

Safety thermostat

External/internal sensor switch

External temp. sensor 200mm length, 3.2mm

diameter

ModelTemp.

range

Speed

range

Capacity

max.Top plate Dimensions Watt Weight

HSD-4 40-300°C 100-1200rpm 10 Liter 175x175mm W200xH150xD260mm 750W 3kg

HSD-5 40-300°C 100-1400rpm 20 Liter 175x175mm W250xH150xD260mm 750W 3.1kg

GHSD-5 40-300°C 100-1400rpm 25 Liter 250x250mm W500xH150xD250mm 1500W 3.5kg

DHSD-5 40-300°C 100-1400rpm 25 Liter250x250mm

DualW500xH150xD250mm 3000W 4.5kg

3216CPOptional programmer

3216 comOptional communication

GHSD-5 HSD-4

45)2"62*+"$!.7

300OC300OC

142

H HOTPLATE/STIRRERS Multi Position

Multi-Hotplate Stirrers, 4 Or 6 Places Aluminium Top Plate **Independent Heating & Stirring Control **up to 300OC/1600rpm

Model: MUHS-6, 6 Positions Multi position hotplate stirrer with six positions. Six individually controlled stirring and heating positions. Each position can be used to stir only, heat only or heat and stir at the same time. Ideal for a narrow bench-top or for applications needing support rack system. The top plates are chemical resistant and heat quickly. A-%##1#/*"#1*1L)%++13*F%-4*/-#.$&*>"&$1-/*6*4%&4*-.#L)1*** motors.

Temperature range: Up to 300oC

Speed control: Up to 1600RPMDimensions: Top plate 11.5x11.5cm, Overall W81xH14.5xD22cm (D includes support rod clamp)Power: 230V (or 115V), 50/60Hz, 3000W-6x500WNet weight: 12Kg

Model: MUHS-4, 4 PositionsMulti-position hotplate stirrer with four positions (in one row), Same as model MUHS-6, except dimensions which are: 60.5x14.5x22cm, weight 8 kg, power 2000 watt-4x500 watt.

MUHS-6

MUHS-2x2

MUHS-3x2

Model: MUHS-2x2 Multi position hotplate stirrer with four positions (in 2 rows 2+2). 4 individually stirring and heating positions. 4 chemical resistant top-plates, 11.5x11.5cm. The top plates are chemical resistant and heat quickly. Stirrers are equipped with strong magnets and high torque motors.

Temperature range: Up to 300oC

Speed control: Up to 1600RPMDimensions: Top plate 11.5x11.5cm Overall W30xH14.5xD31cm (D includes support rod clamp) Placed in two rows 2+2Power: 230V (or 115V), 50/60Hz, 2000W-4x500WNet weight: 8Kg

Model: MUHS-3x2

Multi-position hotplate stirrer with six positions (in 2 rows 3+3)

Same as model MUHS-2x2, except dimensions which are:

45x14.5x31cm, weight 8 kg, power 2000 watt-4x500 watt.

6 individually stirring and heating positions.

6 chemical resistant top-plates, 11.5x11.5cm.

The top plates are chemical resistant and heat quickly.

Stirrers are equipped with strong magnets and high torque

motors.

Options:

CH(1,,1$-*K.#*U),-%0)/1*6*"*!%31*V"#%.)/*A">+,1*71/-%$&* *A8/-1>%W13*9*6*X*Y.-+,"-10A-%##1#* *@$31+1$31$-*Y1"-%$&*6*Stirring Control* *Maximum Temperature of 300OC* *:,)>%$%)>*-.+/*41"-*)+*L)%(Q,8*6*)$%K.>%-8I*R#1"-*K.#*,.F*-1>+1#"-)#1*applications* *Z$%-/*"#1*E)%,-*K#.>*3)#"E,1*("/-*",)>%$%)>*("/1/*6*+"%$-13*F%-4*(41>%(",,8*#1/%/-"$-*+"%$-I

Model MUHP-3x2, Similar to the above described

model: MUHS-3x2, but without stirrers

Options: Model MUHP-2x2, Similar to the above described model: MUHS-2x2, but without stirrers

Model: MUHP-4Similar to the above described model: MUHS-4, but without stirrers.

Model: MUHP-6Multi position hotplate with six positions.

Options:

300OC300OC

Documents

300 OC Aluminium Top HOTPLATES - sklep.genos.com.plsklep.genos.com.pl/sklep2/zalaczniki/zalacznik962.pdf · 137 Large HOTPLATES Hotplate With Wattage Power Control Or Digital PID