Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
300-HW SeriesWaterless Hot Food Well
300-HW
96
Standard Features• Extend food holding times with efficient, precise Halo Heat® technology
• Maintain food quality without the use of extremely hot elements, added humidity or fans
• Increase sales with attractive food presentation and quality
• Reduce installation and operating costs with no water or plumbing needed
• Save on maintenance costs, eliminating lime and scale buildup associated with traditional steam tables
• Increase employee and customer safety with elimination of hot water and steam
• Provide optimal holding temperatures with an adjustable thermostat that can be flush-mounted into the counter or a location out of sight from customers
• Set ideal holding temperatures for any dish with an individual well control option
• HWLF models feature a large flange
• HWI and HWILF models are controlled by two (2) separate adjustable thermostats
• 300-HW/D4, 300-HW/D6, 300-HWLF/D4, and 300-HWLF/D6 models include six (6) half/third-size divider bars and two (2) large pan divider bars
• 300-HW/D443 and 300-HW/D643 models include nine (9) half/third-size divider bars and two (2) large pan divider bars
• 300-HWI/D4, 300-HWI/D6, 300-HWILF/D4, and 300-HWILF/D6 models include six (6) half/third-size divider bars
• 300-HWI/D443 and 300-HWI/D643 models include nine (9) half/third-size divider bars
Three full-size or GN 1/1 pans
Six half-size or GN 1/2 pans
D4: Nine third-size or GN 1/3 pans
D443: Twelve third-size or GN 1/3 pans
D4: 72 lb (33 kg) product maximum; 43.5 qt (42 L) volume maximum
D443: 96 lb (43,5 kg) product maximum; 56.6 qt (53,3 L) volume maximum
*Based on 4” deep pans. Will also accept 2-1/2” (65mm) deep pans; D6 hot wells will accept 6” (150mm) deep pans.
CAPACITY
Configurations (select one)■ 300-HW/D4 ⬜ 300-HW/D6
■ 300-HW/D443 ⬜ 300-HW/D643
■ 300-HWLF/D4 ⬜ 300-HWLF/D6
■ 300-HWI/D4 ⬜ 300-HWI/D6
■ 300-HWI/D443 ⬜ 300-HWI/D643
■ 300-HWILF/D4 ⬜ 300-HWILF/D6
Electrical■ 120V ⬜ 208–240V
■ 230V
Control box cord location■ Back, standard
■ Bottom, optional
Accessories (select all that apply)■ Pan divider bar—half-size/third-size (11318)
■ Pan divider bar—full-size (16019)
■ Pan divider bar—D443/D643 size (1012405)
■ Locking kit (5020849)
Unlike traditional steam tables or dry wells, waterless hot food wells from Alto-Shaam feature radiant Halo Heat® technology that evenly surrounds food without the use of extremely hot elements, added humidity or fans. Extend hold times, maintain food quality and reduce operating costs to maximize return on investment.
12
3
1-9/16" (39mm)
40-15/16" (1039mm)
37-7/8" (962mm)
23-1
/8" (
586m
m)
1-1/
2" (3
8mm
)
20-3
/16"
(512
mm
)W
ELL
5-3/8"(135mm)
6-15/16" (175mm)
5" (127mm)
300-HW/D4
5-3/8"(135mm)
6-15/16" (175mm)
5" (127mm)
1-9/16" (39mm)
40-15/16" (1039mm)
37-7/8" (962mm)WELL
30-3
/16"
(765
mm
)
27-1
/4" (
691m
m)
WEL
L
1-1/
2" (3
8mm
)
300-HW/D443
1-7/
8" (4
6mm
)
4-1/
8" (1
04m
m)
20-3
/16"
(512
mm
)W
ELL
22-1
/16"
(559
mm
)
9/16" (14mm)FLANGE
7-5/16" (185mm)
5-9/16" (140mm)
4-3/8" (111mm)WELL1-
7/8"
(46m
m)
4-1/
8" (1
04m
m)
7-5/16" (185mm)
5-9/16" (140mm)
4-3/8" (111mm)WELL
27-1
/4" (
691m
m)
WEL
L
29-1
/16"
(738
mm
)
9/16" (14mm)FLANGE
6-7/16"(163mm)
6-15/16" (175mm)
1/4" (6mm)
Ø 3/16" (5mm)
4-15
/16"
(125
mm
)
2-1/
2" (6
3mm
)
39-5/8" (1007mm)
11/16" (17mm)FLANGE
11/16" (17mm)FLANGE
6" (152mm)
Optional stainless steel heat shield(not factory supplied)
6" (1
52m
m)
Conduit when exiting bottom
11-3/8" (288mm)
6"(152mm)
5-3/8" (135mm)
Conduit when exiting back
4-15
/16"
(125
mm
)
4" (1
02m
m)
300-HW Series
3-3/16" (81 mm)
44-1/4" (1123mm)
37-7/8" (962 mm)WELL
27-1
/16"
(686
mm
)
20-3
/16"
(512
mm
)W
ELL
3-7/
16" (
87m
m)
5-3/8"(135mm)
6-15/16 " (175 mm)
5" (127 mm)
6-15/16" (175 mm)
6-7/16 " (163 mm)1/4" (6mm)
Ø 3/16" (5mm)
4-15
/16"
(125
mm
)
2-1/
2" (6
3mm
)
39-11/16" (1007mm)
2-5/16" (59mm)FLANGE
2-5/16" (59mm)FLANGE
6" (152mm)
Optional stainless steel heat shield(not factory supplied)
7-5/16" (185mm)
5-9/16" (140 mm)
4-3/8" (111mm)WELL
20-3
/16"
(512
mm
)W
ELL
22-1
/16"
(559
mm
)
2-1/
2" (6
3mm
)FL
AN
GE
1-7/
8" (4
6mm
)
4-1/
8" (1
04m
m)
6" (1
52m
m)
Conduit when exiting bottom
11-3/8" (288mm)
6"(152mm)
5-3/8" (135mm)
Conduit when exiting back
4-15
/16"
(125
mm
)
4" (1
02m
m)
300-HWLF/D4
300-HWLF Series
Specification
Specification
39-11/16" (1007mm)
5/8" (16mm)FLANGE
6" (152mm)
Optional stainless steel heat shield(not factory supplied)
4-15
/16"
(125
mm
)
2-1/
2" (6
3mm
)
13-7/16" (340mm)
13-15/16" (353mm)
1/4" (6mm)
Ø 3/16" (5mm)
30-1
/4" (
767m
m)
27-1
/4" (
691m
m)
WEL
L
12" (305mm)
13-15/16" (353mm)
1-7/16" (36mm)
40-7/8" (1038mm)
12" (304mm)WELL
1-1/
2" (3
8mm
)
300-HWI/D443
23-3
/16"
(588
mm
)
5-3/8"(135mm)
13-15/16" (353mm)
12" (305mm)
1-7/16" (36mm)
40-7/8" (1038mm)
1-1/
2" (3
8mm
)
12" (304mm)WELL
20-3
/16"
(512
mm
)W
ELL
300-HWI/D4
7-5/16" (185mm)
1-7/
8" (4
6mm
)4-
1/8"
(104
mm
)
5-9/16" (141mm)
20-3
/16"
(512
mm
)W
ELL
4-3/8" (111mm)WELL
22-1
/16"
(559
mm
)
5/8"
(15m
m)
FLA
NG
E27
-1/4
" (69
1mm
)W
ELL
29-1
/16"
(738
mm
)
5/8"
(15m
m)
FLA
NG
E
7-5/16" (185mm)
5-9/16" (141mm)
1-7/
8" (4
6mm
)4-
1/8"
(104
mm
)
4-3/8" (111mm)WELL
6" (1
52m
m)
Conduit when exiting bottom
11-3/8" (288mm)
6"(152mm)
5-3/8" (135mm)
Conduit when exiting back
4-15
/16"
(125
mm
)
4" (1
02m
m)
300-HWI Series
39-11/16" (1007mm)
2-5/16" (59mm)FLANGE
6" (152mm)
Optional stainless steel heat shield(not factory supplied)
27-1
/16"
(686
mm
)
20-3
/16"
(512
mm
)W
ELL
3-7/
16" (
87m
m)
3-1/8" (79mm)
44-1/4" (1124mm)
12" (305mm)WELL
5-3/8"(135mm)
13-15/16" (353mm)
12" (305mm)
7-5/16" (185mm)
5-9/16" (141mm)
20-3
/16"
(512
mm
)W
ELL
22-1
/16"
(559
mm
) 2-1/
2" (6
3mm
)FL
AN
GE
1-7/
8" (4
6mm
)4-
1/8"
(104
mm
)
4-3/8" (111mm)WELL
13-15/16" (353mm)
13-7/16" (340mm)1/4" (6mm)
4-15
/16"
(125
mm
)
2-1/
2" (6
3mm
)
Ø 3/16" (5mm)
6" (1
52m
m)
Conduit when exiting bottom
11-3/8" (288mm)
6"(152mm)
5-3/8" (135mm)
Conduit when exiting back
4-15
/16"
(125
mm
)
4" (1
02m
m)
300-HWILF/D4
300-HWILF SeriesSpecification
Specification
300-HW Series
• Appliance must be installed level and must not be installed in any area where it may be directly affected by steam, grease, dripping water, high temperatures, or any other severely adverse conditions.
• Some foods may require additional overhead heating. Always monitor the food temperature and add overhead heating when needed.
• Countertop material must withstand temperatures up to 200°F (93°C).
• A stainless steel heat shield is recommended if the area under the appliance is used for storage.
CHECK FIRST
DIMENSIONS
Model Exterior (H x W x D) Interior (H x W x D)300-HW/D4 7-5/16" x 40-15/16" x 23-1/8" (185mm x 1039mm x 586mm) 4-3/8" x 37-7/8" x 20-3/16" (111mm x 962mm x 512mm)300-HW/D6 9-1/4" x 40-15/16" x 23-1/8" (234mm x 1039mm x 586mm) 6-3/8" x 37-7/8" x 20-3/16" (162mm x 962mm x 512mm)300-HW/D443 7-5/16" x 40-15/16" x 30-3/16" (184mm x 1039mm x 765mm) 4-3/8" x 37-7/8" x 27-1/4" (111mm x 962mm x 691mm)300-HW/D643 9-3/16" x 40-15/16" x 30-3/16" (233mm x 1039mm x 765mm) 6-3/8" x 37-7/8” x 27-1/4" (162mm x 962mm x 691mm)300-HWLF/D4 7-5/16" x 44-1/4" x 27-1/16" (185mm x 1123mm x 686mm) 4-3/8" x 37-7/8" x 20-3/16" (111mm x 962mm x 512mm)300-HWLF/D6 9-1/8" x 44-1/4" x 27-1/16" (232mm x 1123mm x 686mm) 6-3/8" x 37-7/8" x 20-3/16" (162mm x 962mm x 512mm)300-HWI/D4 7-5/16" x 40-7/8" x 23-3/16" (185mm x 1038mm x 588mm) 4-3/8" x 12" x 20-3/16" (111mm x 304mm x 512mm)300-HWI/D6 9-1/4" x 40-7/8" x 23-3/16" (234mm x 1038mm x 586mm) 6-3/8" x 12" x 20-3/16" (162mm x 304mm x 512mm)300-HWI/D443 7-5/16" x 40-7/8" x 30-1/4" (185mm x 1038mm x 767mm) 4-3/8" x 12" x 27-1/4" (111mm x 304mm x 691mm)300-HWI/D643 9-1/4" x 40-7/8" x 30-1/4" (234mm x 1038mm x 767mm) 6-3/8" x 12" x 27-1/4" (162mm x 304mm x 691mm)300-HWILF/D4 7-5/16" x 44-1/4" x 27-1/16" (185mm x 1124mm x 686mm) 4-3/8" x 12" x 20-3/16" (111mm x 304mm x 512mm)300-HWILF/D6 9-1/4" x 44-1/4" x 27-1/16" (234mm x 1124mm x 686mm) 6-3/8" x 12" x 20-3/16" (162mm x 304mm x 512mm)
Counter Cutout (W x D) Control Box Cutout (H x W x D)*300-HW/D4 40-1/4" x 22-1/2" (1022mm x 559mm) 4-1/4" x 5-1/4" x 11-3/8" (108mm x 133mm x 288mm)300-HW/D6 40-1/4" x 22-1/2" (1022mm x 559mm) 4-1/4" x 5-1/4" x 11-3/8" (108mm x 133mm x 288mm)300-HW/D443 40-1/4" x 29-1/2" (1022mm x 749mm) 4-1/4" x 5-1/4" x 11-3/8" (108mm x 133mm x 288mm)300-HW/D643 40-1/4" x 29-1/2" (1022mm x 749mm) 4-1/4" x 5-1/4" x 11-3/8" (108mm x 133mm x 288mm)300-HWLF/D4 40-1/4" x 22-1/2" (1022mm x 559mm) 4-1/4" x 5-1/4" x 11-3/8" (108mm x 133mm x 288mm)300-HWLF/D6 40-1/4" x 22-1/2" (1022mm x 559mm) 4-1/4" x 5-1/4" x 11-3/8" (108mm x 133mm x 288mm)300-HWI/D4 40-1/4" x 22-1/2" (1022mm x 559mm) 4-1/4" x 12-1/4" x 11-3/8" (108mm x 311mm x 288mm)300-HWI/D6 40-1/4" x 22-1/2" (1022mm x 559mm) 4-1/4" x 12-1/4" x 11-3/8" (108mm x 311mm x 288mm)300-HWI/D443 40-1/4" x 29-1/2" (1022mm x 749mm) 4-1/4" x 12-1/4" x 11-3/8" (108mm x 311mm x 288mm)300-HWI/D643 40-1/4" x 29-1/2" (1022mm x 749mm) 4-1/4" x 12-1/4" x 11-3/8" (108mm x 311mm x 288mm)300-HWILF/D4 40-1/4" x 22-1/2" (1022mm x 559mm) 4-1/4" x 12-1/4" x 11-3/8" (108mm x 311mm x 288mm)300-HWILF/D6 40-1/4" x 22-1/2" (1022mm x 559mm) 4-1/4" x 12-1/4" x 11-3/8" (108mm x 311mm x 288mm)*Allow 6" (152mm) clearance from control box to conduit bend.
Net Weight Ship Weight** Ship Dimensions (L x W x H)**300-HW/D4 54.5 lb (25 kg) 128 lb (58 kg) 49" x 34" x 15" (1245mm x 864mm x 381mm)300-HW/D6 61 lb (28 kg) 160 lb (73 kg) 49" x 34" x 15" (1245mm x 864mm x 381mm)300-HW/D443 68 lb (31 kg) 128 lb (58 kg) 49" x 34" x 15" (1245mm x 864mm x 381mm)300-HW/D643 75 lb (34 kg) 160 lb (73 kg) 49" x 34" x 15" (1245mm x 864mm x 381mm)300-HWLF/D4 58 lb (26 kg) Contact factory Contact factory300-HWLF/D6 64.5 lb (29 kg) 110 lb (50 kg) 49" x 34" x 15" (1245mm x 864mm x 381mm)300-HWI/D4 69 lb (31 kg) 117 lb (53 kg) 49" x 34" x 15" (1245mm x 864mm x 381mm)300-HWI/D6 77.5 lb (35 kg) 125 lb (57 kg) 49" x 34" x 15" (1245mm x 864mm x 381mm)300-HWI/D443 85 lb (39 kg) Contact factory Contact factory300-HWI/D643 99 lb (45 kg) Contact factory Contact factory300-HWILF/D4 74 lb (34 kg) 135 lb (61 kg) 49" x 34" x 15" (1245mm x 864mm x 381mm)300-HWILF/D6 83 lb (38 kg) 125 lb (57 kg) 49" x 34" x 15" (1245mm x 864mm x 381mm)* *Domestic ground shipping information. Contact factory for export weight and dimensions.
W164 N9221 Water Street | Menomonee Falls, Wisconsin 53051 | U.S.A.Phone: 262.251.3800 | 800.558.8744 U.S.A./Canada | Fax: 262.251.7067 | alto-shaam.com
HW-SPC-0005 - 11/19 Printed in U.S.A. Due to ongoing product improvement, specifications are subject to change without notice.
CONTACT US
Model V Ph Hz A kW Cord & Plug
300-HW/D4 and /D6,300-HWLF/D4 and /D6, 300-HWI/D4 and /D6,
300-HWILF/D4 and /D6
120V 120 1 50/60 15.0 1.8 NEMA 5-20p20A-125V plug
208–240V 208 1 50/60 6.5 1.4 NEMA 6-15p15A-250V plug
(U.S.A. only)240 1 50/60 7.5 1.8
230V 230 1 50/60 7.8 1.8 CEE 7/7plug rated 250V
CH2-16pplug rated 250V
BS 1363 (U.K. only)plug rated 250V
300-HW/D443,300-HW/D643, 300-HWI/D443,300-HWI/D643
120V 120 1 50/60 20.3 2.4 NEMA L5-30p30A-125V plug
208–240V 208 1 50/60 8.8 1.8 NEMA 6-15p15A-250V plug
(U.S.A. only)240 1 50/60 10.1 2.4
230V 230 1 50/60 10.6 2.4 CEE 7/7plug rated 250V
CH2-16pplug rated 250V
BS 1363 (U.K. only)plug rated 250V
Cord length: 120V: 6 ft (1.8 m); 208–240V: 9 ft (2.7 m); 230V (CEE): 9 ft (2.7 m); 230V (CH, BS): 8 ft (2.5 m)
ELECTRIC
5-20P
BS 1363
CH2-16P
CEE 7/7
6-15P
L5-30P
BS 1363
CH2-16P
CEE 7/7
6-15P
HEAT
1” (25 mm) from combustible surfaces
CLEARANCE
300-HW Series
Heat of rejection
300-HW Heat Gain qs,
BTU/hr
Heat Gain qs,kW
243 0.07