6
Zebra Asphalt Parallel to the curve Oblique Parallel 1. Place the piece on the ground and clearly mark the position of the 3 holes. 2. Drill the 3 holes with a SDS Plus 16x150mm drill bit. Clean thoroughly. 3. Apply the resin with the product's mixer cannula (place the first piece down and make sure that the resin introduced into the hole is mixed correctly). 4. Attach the piece by firstly screwing the middle screw; keep going until all 3 screws are well tightened. 5. Attach the protective closing lids. Recommended Attachment Installation A non-styrene epoxy chemical resin comprised of two components and a 12mm threaded rod with a length no greater than the thickness of the asphalt. Concrete Option A: Metallic attachment, 8.8 Double Expansion 14x140 or 12x120mm. Option B: A non-styrene epoxy chemical resin comprised of two components and a 12mm threaded rod with a length of 12 or 14 cm. Position (relative to the road) Installation Customization of the reflecting strips 300 200 790 2000 www.zicla.com | [email protected] Tel. +34 93 224 27 31 Fax. +34 93 221 70 60 C/ Ramon Turró 100-104, 4º-3ª 08005, Barcelona

300 790 2000 - Plasback

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: 300 790 2000 - Plasback

Zebra

Asphalt

Parallel to the curve Oblique Parallel

1. Place the piece on the ground and clearly mark the position of the 3 holes.

2. Drill the 3 holes with a SDS Plus 16x150mm drill bit. Clean thoroughly.

3. Apply the resin with the product's mixer cannula (place the first piece down and make sure that the resin introduced into the hole is mixed correctly).

4. Attach the piece by firstly screwing the middle screw; keep going until all 3 screws are well tightened. 5. Attach the protective closing lids.

Recommended Attachment Installation

A non-styrene epoxy chemical resin comprised of two components and a 12mm threaded rod with a length no greater than the thickness of the asphalt.

ConcreteOption A: Metallic attachment, 8.8 Double Expansion 14x140 or 12x120mm.

Option B: A non-styrene epoxy chemical resin comprised of two components and a 12mm threaded rod with a length of 12 or 14 cm.

Position (relative to the road)

Installation

Customization of the reflectingstrips

300

200

790

2000

www.zicla.com | [email protected]. +34 93 224 27 31

Fax. +34 93 221 70 60C/ Ramon Turró 100-104, 4º-3ª

08005, Barcelona

Page 2: 300 790 2000 - Plasback

Zebra

Material

Recycled plastic100% recycled PVC

Origin:Electric cable plastic covering, blinds, pipes...

Elongation at break

ShA

MPa

%

45-95

3-15

DIN 53505

UnitProperties

Hardness

Tear Strength

Abrasion loss Excellent

Lightfastness Good

Resistance to acids Good

Resistance to bases Good

Reaction to fire

kN/m

Regulation

DIN 53457

DIN 53457

DIN 53515

Value

400-570

38-96

Test

Applied force(kg)

Elongation(mm)

On the material

On the main part

Compresive strength

Tensile modulus of elasticy

0

1000

1500

5 10 15 20

500

2000

2500

3000

3500

4000

4500

0

BFL-s1Euroclasses

www.zicla.com | [email protected]. +34 93 224 27 31

Fax. +34 93 221 70 60C/ Ramon Turró 100-104, 4º-3ª

08005, Barcelona

Page 3: 300 790 2000 - Plasback

Pictures

Zebrawww.zicla.com | [email protected]

Tel. +34 93 224 27 31Fax. +34 93 221 70 60

C/ Ramon Turró 100-104, 4º-3ª08005, Barcelona

Page 4: 300 790 2000 - Plasback

Zebrawww.zicla.com | [email protected]

Tel. +34 93 224 27 31Fax. +34 93 221 70 60

C/ Ramon Turró 100-104, 4º-3ª08005, Barcelona

Page 5: 300 790 2000 - Plasback

Zebrawww.zicla.com | [email protected]

Tel. +34 93 224 27 31Fax. +34 93 221 70 60

C/ Ramon Turró 100-104, 4º-3ª08005, Barcelona

Page 6: 300 790 2000 - Plasback

Agpac Ltd.PO Box 4575Christchurch Mail CentreChristchurch 8140New Zealand

Chris Hartshorne

Phone: +64 3 338 2400Fax: +64 3 338 [email protected]