LOW COST PRECISION AND RELIABILITYThe DP3 is the latest evolution of the traditional three

roll double pinch plate bending machine. It has been

designed to cover the needs of the fabrication shop:

Strength, User Friendliness and Versatility. FACCIN’s

experience in manufacturing heavy and super-heavy

duty machines is applied to the design of the DP3

series of plate rolls.

• The DP3 series is the most precise 3 roll machine

in its category. The RGS design reduces to a minimum

the distance between the bending points guaranteeing

higher bending accuracy.

• The MCS bearing system, incorporating 4 independent

bearings for each bending roll is a standard feature

of the DP3. It guarantees higher reliability (higher

capacity of load absorption) and increases the range

for tilting the side rolls, resulting in more versatility,

when rolling cones.

• The Ultra wide roll support with lubrication circuit

are mounted over the slides to prevent wear and

tear.

• Another important standard feature to increase the

versatility of the machine is the roll shaft extensions

to allow dies to be fitted to bend profiles and pipes.

• The very high rotation power is a guarantee of the

DP3’s superior rolling torque and speed, available

without loss of energy as all three rolls are driven

independently by hydro-motors and gearboxes

directly coupled to the rolls shafts.

by Faccin

3 Roll Double PinchPlate Bending Rolls

3 Roll Double PinchPlate Bending Rolls

3DP 1521 1500 15 12 9 215 195 10 3.000 3.2x1x1.13DP 1526 1500 23 18 13 265 245 15 5.000 4x1.2x1.73DP 1528 1500 28 22 16 285 265 20 5.000 4x1.2x1.73DP 2021 2000 13 9 7 215 195 10 3.000 3.7x1x1.13DP 2026 2000 19 15 11 265 245 15 5.000 4.5x1.2x1.73DP 2028 2000 23 18 13 285 265 20 6.000 4.5x1.2x1.73DP 2521 2500 9 7 5 215 195 10 4.000 4.2x1x1.13DP 2526 2500 15 12 9 265 245 15 6.000 5x1.2x1.73DP 2528 2500 19 15 11 285 265 20 7.000 5x1.2x1.73DP 2534 2500 23 19 15 340 315 25 11.000 4.8x1.6x1.83DP 3121 3000 7 5 3 215 195 10 4.000 4.7x1x1.13DP 3126 3000 13 9 7 265 245 12.5 7.000 5.5x1.2x1.73DP 3128 3000 15 12 9 285 265 15 8.000 5.5x1.2x1.73DP 3132 3000 17 14 11 320 300 20 11.000 5.2x1.4x1.73DP 3134 3000 20 15 12 340 315 25 12.000 5.2x1.4x1.7

by Faccin

3 Roll Double PinchPlate Bending Rolls

3 Roll Double PinchPlate Bending Rolls

Faccin s.r.l. - 25010 Visano (Brescia) Italy - via dell’Industria, 19tel. +39 030 9958735 r.a. - fax +39 030 9958771 - e-mail: info@faccin.com - web: www.faccin.com

DAT

A C

AN

BE

CH

AN

GED

WIT

HO

UT

PRIO

R N

OTI

CE

IN C

ON

SID

ERAT

ION

OF

CO

NTI

NU

ING

TEC

HN

OLO

GIC

AL

IMPR

OV

EMEN

TS

LARGER, SMALLER, INTERMEDIATE SIZES AND SPECIAL VERSION ARE AVAILABLE BUT NOT LISTED. PLEASE SEND US YOUR DETAILED ENQUIRIES.

Roll Drive System Shaft Extension

Series Production Profile Rolling Cone Rolling

Model/Size Plate Rolling Prebend Prebend Top Roll Side Rolls Power Weight Dimensionsmm 5xD mm 5xD mm 1,4xD mm mm mm (Hp) Kg mt

STANDARD CONFIGURATION:• Linear slides for roll movement;• Ultra wide roll supports;• 4 independent bearings on bending rolls;• Three independently driven rolls;• Full hydraulic power;• Metric scales for rolls positioning;• Front swing console with handle;• Lubrication circuit;• Emergency stop button;• Safety Guard cable;

UPON REQUEST:• Induction hardened rolls;• Rolls surface polishing;• Digital readouts for rolls positioning;• Cone bending attachment;• Special colours;• Profile bending dies;• Top and Side Plate supports;• Vertical rolls versions;• Corrugated rolls versions;