3-Phase Submersible Motor Control

SubMonitor Features One unit for all ratings

190 to 600 VAC 50 and 60 Hz Motor ratings from 3 to 359 amps (3

to 200 Hp) Continuously monitors & displays

Voltage – all three legs Current – all three legs Pump status

Easy to Install Enter motor nameplate data

Hz Volts Service Factor Amps

Motor data can be entered anytime Before installation in panel

Wall outlet transformer

After installation

User-Friendly Features

Detachable Display Mount on front of panel NEMA 3R rated

Integrated current transformers No external CT’s to add No additional turns of wire to

calculate

DIN rail mounting UL 508 Listed

SubMonitor Advanced Features Event history log

Pump run time counter >500 events recorded

Faults Setting changes Power interruptions Manual resets

Password protected settings Optional

Pump / Motor Protection Protects against

Overload Underload Under/Overvoltage Current Unbalance Overheated Motor (Subtrol-

Equipped) False Start (Chattering relays) Phase Reversal (reverse rotation)

Two Package Versions

SubMonitor Premium Package SubMonitor Lightning Arrestor 3-year SubMonitor warranty 3-year FE Motor warranty Panel Door Mounting Kit

SubMonitor Standard Unit SubMonitor 1-year warranty

Warranty Policy 3-Year Warranty

3 years from installation not to exceed 4 years from SubMonitor date code

Requirements:Simultaneous installation of SubMonitor, Subtrol-

Equipped Motor, Lightning ArrestorCompleted warranty card submitted within 30 days

of installations Covers motor and SubMonitor Warranty on replacement units is the period

remaining on the 3-year warranty or the standard warranty, whichever is longer

Components

Easy to Install

Wiring

Wiring

General Panel Configuration

Alarm Circuit is not represented

T1 T2 T3

Contactor

M1, M2 SubMonitor Connections To Contactor Coil

Wiring – External Alarm Alarm circuit

Lampdialer

115 or 230 Volt

Power External Source or

Control Power Transformer

M1 M2 A1 A2

SubMonitor Installations Easy Set-up

Simple text in display area

One menu level to set-up motor for commissioning Simple intuitive interactive push/turn knob

Special Conditions

The SubMontior is NOT COMPATIABLE with variable frequency drives, electric phase converters, or soild state soft starters…….cause nuisance tripping of the motor overheat fault.

Reduced-voltage starters may be used with SubMontior if thewy are bypassed.

2 sec Maximum due to the 3 sec reaction time of SubMonitor

D3 Service tool Provides the ability to download

data from the SubMonitor and upload that data to a PC

Software included with D3

USB Cable Connector provided

Easy to use

.xls file format for spreadsheet format

SubMonitor Installations

Thank you!