2P-Epoxy/Polyamine Water Reducible Primer Based on Beckopox® EP 384 W / EP 075 / EH 623 W (Solutia)

DFT/Cure: 2.4 mil, air driedSubstrate: cold rolled steel

Exposure: 1000 h humidity (ASTM D 4585)Wet adhesion: cross hatch with tape test (DIN 53 151)

Blank Zn/Al Phosphate 0.8% HALOX® 520

®

* Percentage based on formula solids

2P-Epoxy/Polyamine Water Reducible Primer Based on Beckopox® EP 384 W / EP 075 / EH 623 W (Solutia)

DFT/Cure: 2.4 mil, air driedSubstrate: cold rolled steel

Exposure: 1000 h salt spray (ASTM B117)

Blank Zn/Al Phosphate 0.8% HALOX® 520

®

* Percentage based on formula solids

2P-Epoxy/Polyamine Water Reducible Primer Beckopox® VEP 2385 W/VEH 2133 W (Solutia)

DFT/Cure: 2.6 mil, 60 min. at 60˚DFT/Cure Topcoat: 2p PUR (SB) 2 mil, 30 min cure at 60˚C

Substrate: cold rolled steel Exposure: 240 h salt spray (ASTM B 117)

Blank 2% HALOX® 520

®

* Percentage based on formula solids

2-P Epoxy/Polyamine Water Reducible PrimerBeckopox® VEP 2385 W / VEH 2133 W (Solutia)

DFT/Cure: 2.6 mil, 60 min. at 60˚CTopcoat: 2p PUR (SB) 2 mil, 30 min cure at 60˚C; Substrate: cold rolled steel

Exposure: 240 h humidity (ASTM D 4585); Wet adhesion: cross hatch with tape test (DIN 53 151)

Blank 2% HALOX® 520

®

* Percentage based on formula solids

2p Epoxy/Polyamine Water Reducible PrimerBeckopox® VEP 2385 W / VEH 2133 W (Solutia)

DFT/Cure: Primer: 2.6 mil, 60 min. at 60˚CDFT/Cure: Topcoat: 2p PUR (SB) 2 mil, 30 min cure at 60˚C

Substrate: cold rolled steel; Exposure: 240 h salt spray (ASTM B 117)Wet adhesion: cross hatch with tape test (DIN 53 151)

Blank 2% HALOX® 520

®

* Percentage based on formula solids

2-P WB Epoxy ClearBeckopox® EP 384 W (Solutia), Anquamine® 456 (Air Products)

DFT/Cure: 1.4 mil DFTSubstrate: cold rolled steel

Exposure: 400 h salt spray (ASTM B117)

Blank 1% HALOX® 520

®

* Percentage based on formula solids

2-P WB Epoxy ClearEpi-Res® WD 510 (Resolution), Anquamine® 456 (Air Products)

DFT/Cure: 1.4 mil DFT Substrate: cold rolled steel

Exposure: 400 h salt spray (ASTM B117)

Blank 0.7% HALOX® 520

®

* Percentage based on formula solids

2-P WB Epoxy ClearBeckopox® EP 384W (Solutia), Beckopox® EH 623W

DFT/Cure: 1.4 mil DFTSubstrate: cold rolled steel

Exposure: 400 h salt spray (ASTM B117)

Blank 1% HALOX® 520

®

* Percentage based on formula solids

2-P W Epoxy ClearBeckopox® EP 384 W (Solutia), Anquamine® 456 (Air Products)

DFT/Cure: 1.4 mil DFTSubstrate: cold rolled steel

Exposure: 400 h water fog (ASTM 1735-99)

Blank 1% HALOX® 520

®

* Percentage based on formula solids

2-P WB Epoxy ClearBeckopox® EP 384 W (Solutia), Beckopox® EH 623W

DFT/Cure: 1.4 mil DFTSubstrate: cold rolled steel

Exposure: 400 h water fog (ASTM 1735-99)

Blank 1% HALOX® 520

®

* Percentage based on formula solids

2-P WB Epoxy ClearEpi-Res® WD 510 (Resolution), Anquamine® 456 (Air Products)

DFT/Cure: 1.4 mil DFTSubstrate: cold rolled steel

Exposure: 400 h water fog (ASTM 1735-99)

Blank 0.7% HALOX® 520

®

* Percentage based on formula solids

2-P WB Epoxy Clear

Blank 1% HALOX® 520 Blank 0.7% HALOX® 520 Blank 1% HALOX® 520

®

Epi-rez® WD 510 (Resolution) Anquamine®456 (Air Products),DFT: Primer: 1.4 mils,Substrate: cold rolled steel, Exposure: 150hWater Fog, (ASTM D1735-99)

Beckopox® EP 384 (Solutia) Anquamine®456 (Air Products),DFT: Primer: 1.4 mils,Substrate: cold rolled steel, Exposure: 150h Water Fog, (ASTM D1735-99)

Beckopox® EP 384W (Solutia), Beckopox®EH 623W,DFT: Primer: 1.4 mils, Substrate:cold rolled steel, Exposure: 150h WaterFog, (ASTM D1735-99)

* Percentage based on formula solids

2-P WB Epoxy ClearBeckopox® EP 384W (Solutia), Beckopox EH 623W

1.4 Mills DFT over Cold Rolled Steel400 h Water Fog, ASTM 1735-99

BLANK 1% HALOX® 520

2-P WB Epoxy ClearBeckopox® EP 384W (Solutia), Beckopox EH 623W

1.4 Mills DFT over Cold Rolled Steel400 h Salt Spray, ASTM B117

BLANK 1% HALOX® 520

2-P WB Epoxy ClearEpi-Res® WD 510 (Resolution), Anquamine® 456 (Air Products)

1.4 Mills DFT over Cold Rolled Steel400 h Water Fog, ASTM 1735-99

BLANK 0.7% HALOX® 520

2-P WB Epoxy ClearEpi-Res® WD 510 (Resolution), Anquamine® 456 (Air Products)

1.4 Mills DFT over Cold Rolled Steel400 h Salt Spray, ASTM B117

BLANK 0.7% HALOX® 520

2-P WB Epoxy ClearBeckopox® EP 384 W (Solutia), Anquamine®456 (Air Products)

1.4 Mills DFT over Cold Rolled Steel400 h Water Fog, ASTM 1735-99

BLANK 1% HALOX® 520

2-P WB Epoxy ClearBeckopox® EP 384 W (Solutia), Anquamine® 456 (Air Products)

1.4 Mills DFT over Cold Rolled Steel400 h Salt Spray, ASTM B117

BLANK 1% HALOX® 520

* Percentage based on formula solids