1467 Anneke Oostmeijer ©Author - Designer - Registered Parchment Teacher

3D-Element

A

A

Element A

Gewoon Perkamentpapier

Ordinary parchment paper

Element B

Perkamentpapier Viooltjes

Parchment paper Violet Purple No. 61570

FANTASY WHITE WORK no 1650

General:

The card is made of ordinary parchment paper and the insert of Parchment Paper Violet Purple No. 61570.

The 3-D elements: A is made o??f ordinary parchment paper. B Parchment Paper Purple Violets No. 61570.

Tracing:

White pencil: fold line, leaves, outline card.

Tinta Tinta Pearl Red + Blue (mix) = Tinta Pearl purple: 3-D element Tulips, diagonal lines between the perforations.

Perfotaing shallow:

With the perforating tools 4-needle, 5-needle and Semi Circle according the pattern.

Embossing:

Embossing shadows in the leaves and Tulips (see color example). Motifs in the perforation pattern, fold line and outlines of the card.

Perforating deeply:

Again with the perforating tool 4-needle and Semi Circle.

The 5-needle perforations: rotate during deep perforation the needle slightly to the left and then slightly to the right.

With the perforation tool 2-needle: the outlines of the 3-D elements A and B.

Cutting

Cut crosses into the perforations and slots. The outlines of the 3-D elements A and B.

Finish:

Attach an insert sheet made of parchment paper Violet Purple inside the card with Spra Glue. Floding the card.

Perforate the card outlines shallow with perforating tool 2-needle (trough 3 layers).

Perforate with perforating tool 1-needle bold a second time, deep this time.

Cute the outlines out along these perforations. Confirm with Perga Glue the 3-D elements together and glue it on the card.

Good luck! Anneke Oostmeijer