Upload
yraidis-pertuz-roble
View
215
Download
0
Embed Size (px)
Citation preview
8/19/2019 28647.AutographPC
1/2
Features and benefits
Individual well, pump, motor, seal,
cable, and controller design screens
– Determines performance
parameters with equipment screens
Nodal analysis
– Uses state-of-the-art multiphase
flow correlations for accurate
pressure gradient calculations Sensitivity analysis
– Evaluates a specific equipment
design for a wide range of
operating parameters
Dynamic simulation of operations
– Provides evaluation of system
during startup, transient running
conditions, and shutdown;
used for troubleshooting and
operations training Extensive help features
– Offers in-depth information on input
parameters and program options
Exports data to other software packages
– Allows for customization of reports
in Microsoft Excel® or Word®
Tapered pump design
– Allows pump design to use
multiple stage types to properly
handle gas compression
Stress analysis for equipment
passing through bends or doglegs
– Evaluates the equipment for stress
loads caused by wellbore deviations
The Baker Hughes Centrilift AutographPC™
software is the artificial lift industry’s most
comprehensive and user-friendly system
design and application simulation software.
This arms our Baker Hughes application
engineers with a powerful tool to give you
the best solution for each application. This
software can be used to design production
systems for all of our product lines, including:
electrical submersible pumping (ESP) systems;
electrical submersible progressing cavity
pumping (ESPCP™) systems; rod-driven
progressing cavity pumping (RDPCP™)
systems; horizontal surface pumping(HPump™) systems; and gas lift systems.
Each system installation is unique and
with this software, all the well information,
including production characteristics, fluid
properties and well conditions, can be entered
during the initial design phase to produce the
optimum solution for each sizing. This user-
friendly software can be used for both fixed
speed and variable speed applications.
AutographPC software also provides very easy
to use Sensitivity Analysis to quickly evaluate
your design in a wide range of possible
operating conditions.
AutographPC software’s dynamic simulator
is the only software of its kind in the
industry, allowing you to ‘see’ how the
pumping system behaves during the firstcrucial minutes or hours of operation after
startup, or longer term as the well ages and
well conditions change. This feature allows
you to change up to 30 different operating
conditions and simulate how the system will
react, getting immediate feedback.
AutographPC Sizing and Simulation SoftwareOptimize production for the life of your well
OVERVIEW| bakerhughes .com
8/19/2019 28647.AutographPC
2/2
AutographPC, ESPCP, RDPCP, HPump, Vision and XPVision are trademarks of Baker Hughes Incorporated.
Disclaimer of Liability: This information is provided for general information purposes only a nd is believed to be accurate as of the date hereof; however, Baker Hughes Incorporated and its affiliates do not make any warranties or representations of any kind regardingthe information and disclaim all express and implied warranties or representations to the fullest extent permissible by law, including those of merchantability, fitness for a particular purpose or use, title, non-infringement, accuracy, correctness or completeness of theinformation provided herein. All information is furnished “as is” and without any license to distribute. The user agrees to assume all liabilities related to the use of or reliance on such information. BAKER HUGHES INCORPORATED AND ITS AFFILIATES SHALL NOT BELIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER INCLUDING BUT NOT LIMITED TO ITS NEGLIGENCE.
© 2014 Baker Hughes Incorporated. All rights reserved. 28647 01/2014
The simulator can track and plot the
resulting changes of many parameters like
flow rates, intake and discharge pressure,
current, motor temperature and torque, just
to name a few. In addition, the simulator
displays alarms when the system goes out of
its recommended operating range, and helpsto diagnose common problems like tubing
leaks, pump wear, or pump-off. Our software
also assists in forensic analysis by simulating
conditions that can lead to a failure.
The AutographPC sizing and simulation
software is a cornerstone of our unmatched
design, service, and support – ensuring
the most efficient system and optimizedproduction for the life of a well. It also serves
as the calculation engine for Baker Hughes
XPVision™ software that connects real-time
field data with the model.
Contact your Baker Hughes representative
today or visit www.bakerhughes.com/esp to
find out how AutographPC software can help
you optimize production for the producinglife of your well.
Pump Screen
This is the “central” screen since the pump selection
drives the selection of the other submersible pumpingsystem components.
Sensitivity Analysis P lot
A sensitivity analysis option provides a powerful tool tovary parameters (water cut, rate, intake, pressure, etc.),which may be critical to design, and see the impact on
other design parameters such as Total Dynamic Head and
brake HP.
Simulator Screen
The simulator generates data that can be plotted, saved
in its own internal format for later retrieval, or exportedinto Microsoft Excel or Microsoft Word for analysis.
Gas Lift – Pressure Gradient Screen
The latest version of AutographPC software handles not
only pumps but also gas lift systems for design, trouble- shooting, and analysis.
Stress Analysis ScreenThe ASAP feature allows you to configure the ESP and
computes the static bending stress as the equipment
passes a ‘dog-leg’ during installation and displays a redflag if the stress is beyond recommended limits.
OVERVIEW