SCHEMATIC DIAGRAM

WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "X-RAY RADIATION PRECAUTION", "SAFETYPRECAUTION" AND "PRODUCT SAFETY NOTICE" ON THE MANUAL FOR THIS MODEL.

CAUTION: The international hazard symbols "*" in the schematic diagram and the parts list designate componentswhich have special characteristics important for safety and should be replaced only with types identical to those in theoriginal circuit or specified in the parts list. The mounting position of replacements is to be identical with originals.Before replacing any of these components, read carefully the PRODUCT SAFETY NOTICE on the MANUAL for thismodel. Do not degrade the safety of the receiver through improper servicing.

NOTE:1. RESISTOR Resistance is shown in ohm [K = 1.000, M = 1.000.000]. All resistors are 1/6W and 5%

tolerance carbon resistor, unless otherwise noted as the following marks.1/2R = Metal or Metal oxide of 1/2 watt 1/2S = Carbon compsistion of 1/2 watt1RF = Fuse resistor of 1 watt 10W = Cement of 10 wattK = ±10% G = ±2% F = ±1%

2. CAPACITOR Unless otherwise noted in schematic, all capacitor values less than 1 are expressed in?F, and the values more than 1 in pF.All capacitors are ceramic 50V, unless otherwise noted as the following marks.

Electolytic capacitor Mylar capacitor3. The parts indicated with " * " have special characteristics, and should be replaced with identical parts only.4. Voltages read with DIGITAL MULTI-METER from point indicated to chassing ground, using a color bar signal with all controls at normal, line voltage 220 volts.5. Waveforms are taken receiving color bar signal with enough sensitivity.6. Voltage reading shown are nominal values and may vary ±20% except H.V.

MODEL : 26WL36P

– 54 –

SCHEMATIC DIAGRAM STRUCTURE:

SIGNAL ( 1/11 ) [ SHEET - 1/11 ] ................ 1/36AV [ SHEET - 2/11 ] ................ 2/36YPBPRSW [ SHEET - 3/11 ] ................ 3/36MICON / TEXT [ SHEET - 4/11 ] ................ 4/36V / C [ SHEET - 5/11 ] ................ 5/36SIGNAL from AV [ SHEET - 6/11 ] ................ 6/36PC AUDIO SWITCHING [ SHEET - 7/11 ] ................ 7/36HP-AMP&MUTE [ SHEET - 8/11 ] ................ 8/36MON OUTPUT [ SHEET - 9/11 ] ................ 9/36COLOUR DIFFERENCE SWITCHING [ SHEET - 10/11 ] ............ 10/36SYNC_SW [ SHEET - 11/11 ] ............ 11/36

BACK / AV AV TERMINAL [ SHEET - 1/2 ] ................ 12/36AV from SIGNAL [ SHEET - 2/2 ] ................ 13/36

SCALER BLOCK DIAGRAM [ SHEET - 1/9 ] ................ 14/36LVDS_IN [ SHEET - 2/9 ] ................ 15/36DIGITAL RGB Pro. [ SHEET - 3/9 ] ................ 16/36SUB MAICON [ SHEET - 4/9 ] ................ 17/36OSD MIX [ SHEET - 5/9 ] ................ 18/36OSD±MIX [ SHEET - 6/9 ] ................ 19/36LVDS OUT [ SHEET - 7/9 ] ................ 20/36( 8/9 ) [ SHEET - 8/9 ] ................ 21/36ANALOG OSD / TEXT [ SHEET - 9/9 ] ................ 22/36

M2 / TEXT ( 1/2 ) [ SHEET - 1/2 ] ................ 23/36( 2/2 ) [ SHEET - 2/2 ] ................ 24/36

TIF-MA TIF & MA [ SHEET - 1/2 ] ................ 25/36AUDIO GAIN COMPENSATION [ SHEET - 2/2 ] ................ 26/36

FRONT AV ............................................................................................................................ 27/36KEY ........................................................................................................................................ 28/36LED RMT .............................................................................................................................. 29/36PC INPUT ............................................................................................................................. 30/36POWER SW .......................................................................................................................... 31/363D MOD ................................................................................................................................ 32/36G-HYPER ............................................................................................................................... 33/36A-OUT ( 1/2 ) [ SHEET - 1/2 ] ................ 34/36

( 2/2 ) [ SHEET - 2/2 ] ................ 35/36WIRING CONNECTION DIAGRAM ..................................................................................... 36/36

IMPORTANT

* The parts which are indicated with brokenlines are restricted to distribute outside.

TU

NE

R-A

PR

O B

OA

RD

[SHEET-1/11]SIGNAL - (1/11)26WL36P

TU

NE

R-A

PR

O B

OA

RD

IMPORTANT

* The parts which are indicated with brokenlines are restricted to distribute outside.

[SHEET-1/11]SIGNAL - (1/11)26WL36P

[SHEET-2/11]SIGNAL - AV26WL36P

[SHEET-2/11]SIGNAL - AV26WL36P

SIGNAL - YPBPRSW[SHEET-3/11]

26WL36P

SIGNAL - YPBPRSW[SHEET-3/11]

26WL36P

SIGNAL - MICON/TEXT[SHEET-4/11]

26WL36P

SIGNAL - MICON/TEXT[SHEET-4/11]

26WL36P

SIGNAL - V/C[SHEET-5/11]

26WL36P

SIGNAL - V/C[SHEET-5/11]

26WL36P

SIGNAL - SIGNAL from AV[SHEET-6/11]

26WL36P

For lightning

For lightning

For lightning

SIGNAL - SIGNAL from AV[SHEET-6/11]

26WL36P

For lightning

[SHEET-7/11]SIGNAL - PC AUDIO SWITCHING26WL36P

[SHEET-7/11]SIGNAL - PC AUDIO SWITCHING26WL36P

[SHEET-8/11]SIGNAL - HP-AMP&MUTE26WL36P

[SHEET-8/11]SIGNAL - HP-AMP&MUTE26WL36P

[SHEET-9/11]SIGNAL - MON OUTPUT26WL36P

[SHEET-9/11]SIGNAL - MON OUTPUT26WL36P

SIGNAL - COLOUR DIFFERENCE26WL36P

[SHEET-10/11]SWITCHING

SIGNAL - COLOUR DIFFERENCE26WL36P

[SHEET-10/11]SWITCHING

[SHEET-11/11]SIGNAL-SYNC_SW26WL36P

[SHEET-11/11]SIGNAL-SYNC_SW26WL36P

(Com

bine

d w

ith S

cart

)

BACK AV - AV TERMINAL[SHEET-1/2]

26WL36P

(Com

bine

d w

ith S

cart

)

BACK AV - AV TERMINAL[SHEET-1/2]

26WL36P

For lightning

BACK AV - AV from SIGNAL[SHEET-2/2]

26WL36P

For lightning

BACK AV - AV from SIGNAL[SHEET-2/2]

26WL36P

SCALER - BLOCK DIAGRAM[SHEET-1/9]

26WL36P

SCALER - BLOCK DIAGRAM[SHEET-1/9]

26WL36P

SCALER - LVDS_IN[SHEET-2/9]

26WL36P

SCALER - LVDS_IN[SHEET-2/9]

26WL36P

SCALER - DIGITAL RGB Pro.26WL36P

[SHEET-3/9]

SCALER - DIGITAL RGB Pro.26WL36P

[SHEET-3/9]

SCALER - SUB MAICON[SHEET-4/9]

26WL36P

SCALER - SUB MAICON[SHEET-4/9]

26WL36P

SCALER - OSD MIX26WL36P

[SHEET-5/9]

SCALER - OSD MIX26WL36P

[SHEET-5/9]

SCALER - OSD±MIX[SHEET-6/9]

26WL36P

SCALER - OSD±MIX[SHEET-6/9]

26WL36P

SCALER - LVDS OUT[SHEET-7/9]

26WL36P

SCALER - LVDS OUT[SHEET-7/9]

26WL36P

[SHEET-8/9]SCALER - (8/9)26WL36P

[SHEET-8/9]SCALER - (8/9)26WL36P

26WL36PSCALER - ANALOG OSD/TEXT

[SHEET-9/9]

26WL36PSCALER - ANALOG OSD/TEXT

[SHEET-9/9]

M2/TEXT - (1/2)26WL36P

[SHEET-1/2]

M2/TEXT - (1/2)26WL36P

[SHEET-1/2]

M2/TEXT - (2/2)26WL36P

[SHEET-2/2]

M2/TEXT - (2/2)26WL36P

[SHEET-2/2]

(SPK terminal)

(VIDEO1 GND)

(POWER UNIT)

[SHEET-1/2]TIF-MA - TIF & MA26WL36PGND for Screw metal fittings GND for Screw metal fittings

(SPK terminal)

(VIDEO1 GND)

(POWER UNIT)

GND for Screw metal fittings GND for Screw metal fittings

[SHEET-1/2]TIF-MA - TIF & MA26WL36P

Pin of MA module

TIF-MA - AUDIO GAIN26WL36P

[SHEET-2/2]COMPENSATION

Pin of MA module

TIF-MA - AUDIO GAIN26WL36P

[SHEET-2/2]COMPENSATION

FRONT AV26WL36P

SUB-SCREENEARPHONEHEADPHONE

SUB-SCREENEARPHONEHEADPHONE

FRONT AV26WL36P

KEY26WL36P

KEY26WL36P

LED RMT26WL36P

LED RMT26WL36P

PC AUDIO

PC INPUT26WL36P

PC AUDIO

PC INPUT26WL36P

POWER SW26WL36P

POWER SW26WL36P

3D MOD26WL26P

3D MOD26WL26P

G-HYPER26WL36P

G-HYPER26WL36P

A-OUT - (1/2)26WL36P

[SHEET-1/2]

A-OUT - (1/2)26WL36P

[SHEET-1/2]

(Screw: Chassis GND)

[SHEET-2/2]

26WL36PA-OUT - (2/2)

Corresponded to shielding (should be enclosed with GND) AUDIO OUTPUT(R/L)

The surface patterns under Q610 and Q6100 should be GND, and make many more through-holes between suface GNDs as much as possible.

(Screw: Chassis GND)

Corresponded to shielding (should be enclosed with GND)

The surface patterns under Q610 and Q6100 should be Gthrough-holes between suface GNDs as much as possible

[SHEET-2/2]

26WL36PA-OUT - (2/2)

AUDIO OUTPUT(R/L)

e GND, and make many more ible.

WIRING CONNECT DIAGRAM26WL36P

WIRING CONNECT DIAGRAM26WL36P