26-62A

Printed in U.S.A. October 1997

Manufacturers of Precision Instruments

ILLUSTRATED PARTS LIST

JOINT TORQUE SYSTEM(ENGLISH AND SI UNITS)

Part Number 26-62Revision A

Manual 26-62 contains 276 pages as follows:

Cover ............................. October 1997 ii thru iv ........................... .October 1997 l-l thru l-8 ........................ February 1981 2-l thru 2-110 ...................... February 1981 3-l thru 3-120 ...................... .October 1997 4-1 thru 4-32. ...................... February 1981

All product, brand, or trade names used in this publication are the trademarks or registered trademarks of their respective owners.

Information in this manual is subject to change without notice.

IMPORTANT SAFETY NOTICE

Proper service and repair is important to the safe, reliable operation of all M/D TOTCO equipment. The service procedures recommended by M/D TOTCO and described in the technical manuals are recommended methods of performing service operations. When these service operations require the use of tools specially designed for the purpose, those special tools should be used as recommended. Warnings against the use of specific service methods that can damage equipment or render it unsafe are stated in the manuals. These warnings are not exclusive, as M/D TOTCO could not possibly know, evaluate and advise service people of all conceivable ways in which service might be done or of all possible associated hazardous consequences. Accordingly, anyone who uses service procedures or tools which are not recommended by M/D TOTCO must first sat- isfy themselves thoroughly that neither personnel safety nor equipment safety will be jeopardized by the method selected.

October 1997 M/D TOTCO

. . . III

LIMITED PRODUCT WARRANTY

THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT BY WAY OF LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.

Martin-Decker TOTCO (Company) warrants to Buyer (Purchaser) of new products manufactured or supplied by the Company that such products are, at the time of delivery to the Purchaser, free of material and workmanship defects, subject to the following exceptions:

A. Any product which has been repaired or altered in such a way, in the Companys judgement, as to affect the product adversely, including any repairs, rebuilding, welding or heat treating outside of Company authorized facility.

B. Any product which has, in the Companys judgement, been subject to negligence, accident, or improper storage.

C. Any product which has not been installed, operated and maintained in accordance with normal practice and within the recommendations of the Company.

D. For all items of special order by Buyer which are not manufactured by Company, Buyer should submit warranty claims directly to the manufacturer thereof.

The Companys obligation under this warranty is limited to repairing, or at its option, replacing any products which in its judgement proved not to be as warranted within the applicable warranty period. All costs of transportation of products claimed not to be as warranted to authorized Company service facility shall be borne by Buyer. Costs of return transportation to Buyer of products accepted for repair or replacement by Company under the warranty provisions of the Sales Agreement shall be borne by the Company. Company may, at its sole option elect to refund the purchase price of the products, and Company shall have no further obligation under the Sales Agreement.

The cost of labor for installing a repaired or replacement part shall be borne by Buyer. Replacement parts provided under the terms of this warranty are warranted for the remainder of the warranty period of the product upon which installed to the same extent as if such parts were original components thereof.

The warranty periods for various products are:

A. Hydraulic, Mechanical, Electronic Equipment: one (1) year from date of installation or fifteen (15) months from date of shipment from Company, whichever occurs first.

B. All Elastomer Diaphragms: six (6) months from date of shipment from Company.

No deviations from the Companys standard warranty terms or period as stated herein will be honored unless agreed to in writing by an authorized Company representative prior to acceptance of the order.

EXCLUSIVITY OF REMEDY AND LIMITATION OF LIABILITY. THE REMEDIES PROVIDED FOR IN THIS WARRANTY SHALL CONSTITUTE THE SOLE RECOURSE OF BUYER AGAINST COMPANY FOR BREACH OF ANY OF COMPANYS OBLIGATIONS UNDER THE SALES AGREEMENT WITH BUYER, WHETHER THE CLAIM IS MADE IN TORT OR IN CONTRACT, INCLUDING CLAIMS BASED ON WARRANTY, NEGLIGENCE, OR OTHERWISE.

IN NO EVENT SHALL COMPANY BE LIABLE FOR DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT, STRICT LIABILITY OR IN TORT (INCLUDING NEGLIGENCE), NOR FOR LOST PROFITS.

iv October 1997 M/D TOTCO

INSTRUCTION M A N U A L 26-62 T A B L E O F C O N T E N T S

-

P a g e

INTRODUCTION ............................ l-l l-l Introduction ........................ l-l l-4 G r o u p Assembly Parts List Section ............. l-l l-6 . Figure a n d Index N u m b e r Column .............. l-l l-7 . Part N u m b e r Column .................... l-l l-8 . Description Column .................... l-l l-10 . Units Per Assembly Column ................ l-5 l-11 . Use o n C o d e Column .................... l-5 l-12 Numerical Index Section .................. l-5 l-14 . Second a n d Succeeding Position Arrangement ........ l-5 1-15 Additional Parts Lists .................. l-5 l-17 H o w to Use the Illustrated Parts Breakdown ......... l-5 G R O U P A S S E M B L Y P A R T S LIST (ENGLISH). ................ 2-l G R O U P A S S E M B L Y P A R T S LIST (SI UNITS) ................ 3-l NUMERICALINDEX .......................... 4-l

Section

I

II III

IV

LIST O F ILLUSTRATIONS

Figure

l-l l-2 2-l

2-2

2-3

2-4

2-5

2-6

2-7

2-8

2-9

2-10

2-11

2-12

2-13

H O W T o Use the Illustrated Parts Breakdown . . . . . . Catalog Numbering System (English/S1 Units) . . . . . Joint Torque (JT) System (English), 2,500 to 5,000 . .

Ft-Lb, Box Mount Joint Torque (JT) System (English), 7,500 to 10,000 .

Ft-Lbs, Box Mount Joint Torque (JT) System (English), 12,000 to 20,000 .

Ft-Lbs, Box Mount Joint Torque (JT) System (English), 25,000 to 100,000

Ft-Lbs, Box Mount Joint Torque (JT) System (English), 2,500 to 5,000 - .

Ft-Lbs, Clamp Mount Joint Torque (JT) System (English), 7,500 to 10,000 =

Ft-Lbs, Clamp Mount Joint Torque (JT) System (English), 12,000 to 20,000 .

Ft-Lbs, Clamp Mount Joint Torque (JT) System (English), 25,000 to 100,000

Ft-Lbs, Clamp Mount Joint Torque (JT) System (English), 2,500 to 5,000 . .

Ft-Lbs, T o n g Mount (90) Joint Torque (JT) System (English), 7,500 to 10,000 .

Ft-Lbs, T o n g Mount (90) Joint Torque (JT) System (English), 12,000 to 20,000 .

Ft-Lbs, T o n g Mount (90') Joint Torque (JT) System (English), 25,000 to 100,000

Ft-Lbs, T o n g Mount (90') Joint Torque (JT) System (English), 2,500 to 5,000 . .

Ft-Lbs, Panel Mount

.......

....... .......

. . . . . . . 2-4

.......

.......

. . . . . . . 2-18

. . . . . . . 2-26

. . . . . . .

. . . . . . .

. . . . . . .

. . . . . . . 2-41

. . . . . . . 2-45 _

P a g e

l-2 l-7 * 2-l

2-8

2-12

2-15

2-22

2-30

2-33

2-37

ii

INSTRUCTION MANUAL 26-62 LIST OF ILLUSTRATIONS (CONTD)

Figure Page

2-14

2-15

2-16

2-17 2-18 2-19 2-20 2-21 2-22 2-23 2-24

2-25

2-26

2-27

2-28 2-29 2-30 2-31 2-32 3-l

3-2

3-3

3-4

3-5

3-6

3-7

3-8

3-9

3-10

3-11

3-12

3-13

Joint Torque (JT) System (English), 7,500 to 10,000 . . . . . Ft-Lbs, Panel Mount

Joint Torque (JT) System (English), 12,000 to 20,000 . . . . Ft-Lbs, Panel Mount

Joint Torque (JT) System (English), 25,000 to 100,000 . . . . Ft-Lbs, Panel Mount

Load Cell Assembly (3.68 In.) . . . . . . . . . . . . . . . . Load Cell Assembly (4.0 In.) . . . . . . . . . . . . . . . . Load Cell Assembly (6.53 In.) . . . . . . . . . . . . . . . . . Gauge and Damper Assembly (English), 2,500 to 5,000 Ft-Lbs . Gauge and Damper Assembly (English), 7,500 to 10,000 Ft-Lbs . Gauge and Damper Assembly (English), 12,000 to 20,000 Ft-Lbs Gauge and Damper Assembly (English), 25,000 to 100,000 Ft-Lbs Gauge and Damper Assembly (English), 2,500 to 5,000 Ft-Lbs, .

Panel Mount Gauge and Damper Assembly (English), 7,500 to 10,000 Ft-Lbs,

Panel Mount Gauge and Damper Assembly (English), 12,000 to 20,000 Ft-Lbs,

Panel Mount Gauge and Damper Assembly (English), 25,000 to 100,000 . . .

Ft-Lbs, Panel Mount Damper Assembly (Low Pressure), Gauge Mount . . . . . . . . . Damper Assembly (High Pressure), Gauge Mount . . . . . . . . Damper Assembly (Low Pressure), Panel Mount . . . . . . . . . Damper Assembly (High Pressure), Panel Mount . . . . . . . . Linkage Assembly . . . . . . . . . . . . . . . . . . . . . . Joint Torque (JT) System (SI Units), 3,000 to 7,000 Newton .

Metres, Box Mount Joint Torque (JT) System (SI Units), 11,000 to 14,000 Newton

Metres, Box Mount Joint Torque (JT) System (SI Units), 17,000 to 27,000 Newton

Metres, Box Mount Joint Torque (JT) System (SI Units), 34,000 to 135,000 . . .

Newton Metres, Box Mount Joint Torque (JT) System (SI Units), 3,000 to 7,000 Newton .

Metres, Clamp Mount Joint Torque (JT) System (SI Units), 11,000 to 14,000 . . . .

Newton Metres, Clamp Mount Joint Torque (JT) System (SI Units), 17,000 to 27,000 . . . .

Newton Metres, Clamp Mount Joint Torque (JT) System (SI Units), 34,000 to 135,000 . . .

Newton Metres, Clamp Mount Joint Torque (JT) System (SI Units), 3,000 to 7,000 Newton .

Metres, Tong Mount Joint Torque (JT) System (SI Units), 11,000 to 14,000 . . . .

Newton Metres, Tong Mount Joint Torque (JT) System (SI Units), 17,000 to 27,000 . . . .

Newton Metres, Tong Mount Joint Torque (JT) System (SI Units), 34,000 to 135,000 . . .

Newton Metres, Tong Mount Joint Torque (JT) System (SI Units), 3,000 to 7,000 Newton .

Metres, Panel Mount

. . . 2-48

. . . 2-59

. . . 2-61

. . . 2-63

. . . 2-64

. . . 2-68

. . . 2-74

. . . 2-80

. . . 2-84

. . . 2-106

. . . 2-107

. . . 2-108

. . . 2-109

. . . 2-110

. . . 3-l

2-52

2-56

2-88

2-94

2-100

3-4

3-9

3-14

3-18

3-21

3-26

3-31

3-35

3-38

3-43

3-48

3-52

iii

INSTRUCTION PilANUAL 26-62 LIST O F ILLUSTRATIONS ( C O N T D)

Figure P a g e

3-14

3-15

3-16

3-17 3-18 3-19 3-20

3-21

3-22

3-23

3-24

3-25

3-26 G a u g e a n d D a m p e r Assembly (SI Units), 17,000 to 37,000

3-27 G a u g e a n d D a m p e r Assembly (SI Units), 34,000 to 135,000 . . . . . . Newton Metres, Panel Mount

3-28 D a m p e r Assembly (Low Pressure), G a u g e Mount . . . . . . ...... 3-115 - 3-29 D a m p e r Assembly (High Pressure), G a u g e Mount . . . . . ...... 3-116 3-30 D a m p e r Assembly (Low Pressure), Panel Mount . . . . . . ...... 3-117 3-31 D a m p e r Assembly (High Pressure), Panel Mount . . - . . ...... 3-118 3-32 Linkage Assembly . . . . . . . . . . . . . . . . . . . ...... 3-119

Joint Torque (JT) System (SI Units), 11,000 to 14,000 . Newton--Metres, Panel Mount

Joint Torque (JT) System (SI Units), 17,000 to 27,000 . Newton Metres, Panel Mount

Joint Torque (JT) System (SI Units), 34,000 to 135,000 Newton Metres, Panel Mount

L o a d Cell Assembly (3.68 In.) . . . . . . . . . . . . . L o a d Cell Assembly (4.0 In.) . . . . . . . . . . . . . L o a d Cell Assembly (6.53 In.) . . . . . . . . . . . . . G a u g e a n d D a m p e r assembly (SI Units), 3,000 to 7,000 .

Newton Metres G a u g e a n d D a m p e r Assembly (SI Units), 11,000 to 14,000



Newton Metres G a u g e a n d D a m p e r Assembly (SI Units), 3,000 to 7,000 .

Newton Metres, Panel Mount G a u g e a n d D a m p e r Assembly (SI Units), 11,000 to 14,000

Newton Metres, Panel Mount

Newton Metres, Panel Mount

. . . . . .

. . . . . . 3-60

. . . . . . 3-65

...... 3-69

...... 3-71

...... 3-72

...... 3-74

. . . . . . 3-78

. . . . . . 3-84

. . . . . .

. . . . . .

. . . . . . 3-98

. . . . . .

3-55

3-90

3-94

3-104

3-110

iv

INSTRUCTION MANUAL 26-62 SECTION I

INTRODUCTION

l-1 INTRODUCTION

1-2 This manual contains an illustrated parts breakdown for the Joint Torque Systems manufactured by TOTCO.

1-3 This section describes how to use the Group Assembly Parts List, Numerical Index (when included), Recommended Spare Parts List (when included), and

any other parts identification and ordering data.

l-4 GROUP ASSEMBLY PARTS LIST SECTION

l-5 The Group Assembly Parts List Section (Figure 2-l and subsequent) includes detailed or exploded views accompanied by parts lists keyed to the index

numbers on the illustrations. Each assembly is listed in its order of disassembly. Detail parts descriptions are indented to show relationship to their assemblies. Attaching parts are listed immediately following the parts they attach and are identified by the abbreviation (AP) following the descriptions. Attaching parts are indented at the same level as the items they attach. The relationship of each part to its next higher assembly or main group is shown either by indention or by cross reference notes.

l-6 FIGURE AND INDEX NUMBER COLUMN. In this column the digit(s) preceding the dash refer to the figure in the parts breakdown on which a part or assembly

is illustrated (See Figure l-l). Digit(s) following the dash are the figure numbers for the parts. An asterisk(*) following dash indicates the part is not illustrated.

l-7 PART NUMBER COLUMN. This column lists TOTCO part numbers, part numbers of suppliers to TOTCO and also standard items. Part numbers are used ex-

clusively to identify parts. The entry STD HDWE in this column means hardware, without an assigned part number, and available from normal commercial sources. Information for purchase of these items is contained in the DESCRIPTION column.

l-8 DESCRIPTION COLUMN. This column lists each assembly, its attaching parts (AP) and detail parts of the assembly indented to show their relationship

to the assembly. Where vendor-supplied parts are used by TOTCO, the manufacturers' names are included in this column. Parts identified with (AP) are attaching parts for items and assemblies. Where it is impractical to show completely in one illustration all detail parts of any one subassembly, the subassembly is illustrated completely assembled on this illustration and a separate view of the subassembly is furnished. A notation in parentheses following the part description, cross refers the subassembly to its illustration. A notation in parentheses following the description of the part on the subassembly view refers to the figure and index number of the subassembly on the next higher assembly (NRA) illustration.

l-9 Listed parts are indented to indicate item relationshiD of next higher assembly. The description of each assembly is followed in the list (except

for attaching parts) by its detail parts indented one column to the right (See 4, Figure l-l). To determine the next higher assembly of a part or assembly, note the column in which the first word of the nomenclature appears. The first item directly above which appears one column to the left (except for attaching parts) is the next higher assembly.

l-l

INSTRUCTION MANUAL 26-62

Identifying and locating parts information in the parts list and associated illustration.

2 Index number of a part an the illustration and accompanying A. .

parts list. index number in parts list are assifPted in disassembly order.

3 Part numbsr of assemblies and illustrated detail parts.

. CLWII. ho .lm, NVIS. Pen .n.

4 Description of parts indented . cLEI8. Pea .n.

to show relationship to the assembly of which it is a part, pup mu, . . I

i.e., clevis, -8, is a detail p(rt .xru..ion . . . of cylinder assembly, part number

.a, o-32 x 1,4ur> . . . . . . . . . . .

#r-1890. 8pring. -18, is a part of piston rod and calibration spring assembly, part number 284888.

Attaching parts (AP) are always indented at the same level as, and directly beneath, the item

eXt higher assembly (NHA) references indicate the illustration and index number which the asssmbly is shown a complstely assembled cond md also the asssmbly of whi

7 Quantity of parts used in one, ortoattachone,partor

8 Use an Codes define specific differences betwem similar assemblies. Far sxample, indmted parts beming code A are used only in the assembly bearing the same A cods. Whew tiers is no code Istter assigned in the USE DN CODE colWnn. uncoded detail parts are used in. and are cormnon, to all of the coded top assemblies fi.8.. A. 8, C) of a particular parts list.

FIGURE l-l. HOW TO USE THE ILLUSTRATED PARTS BREAKDOWN (Sheet 1 of 3)

l-2


. ti. lhl.-(?.rk& :. . . . .

\

flC ay) . Lu6r..mtor?wrur. . . . . . 1

wa. LLLCNC 0glm- : LABP. -6 PII OMLV . . . : : : : : : : : : .aom.c+iMlu . . . . . . . . . . I

To identify a part when the

a part number IS known:

1 Wmnthspartnum4mrisknawn. refer to the Numerical Index (Wztian VII). Locate the part number and nots W figure and index number an which the pm appears.

To identify a part when the

1 Wmnthspartnum4mrisknawn. refer to the Numerical Index (Wztian VII). Locate the part number and nots W figure and index number an which the pmt appears.

2 Tuntothafigure 2 Tuntothafigure mdlocatetheind UtdlOLWBthOifld was referenced in was referenced in Max.

3 If a pictorial rems6mati0n of the part, or it8 location is desired. refer to the sams index numbsr on the accompanying illustrati0n.

FIGURE l-l. HOW TO USE THE ILLUSTRATED PARTS BREAKDOWN (Sheet 2 of 3)

l-3


......... 6-20 ......... 6-22 ......... 6-2 ......... 6-26 ......... 6-28 ......... 6-W .

I I ch.lf 0 ,,..,~A.*::fZ ~2~; : : : : : : : : : : : : : : : : : : I i

\

To identify a part when the part number is NOT known:

1 Determine the fuwtion and applications of the part required.

I/

-15 26-094 -16 STD nl

Turn tc the List of Illustrations and select the most appropriate title. Note the illustration page number.

2 Turn to the pegs indicated and I locate the part on tie illustration.

From the illustration, obtain the index nunher a&-d to the part.

I

Refer to the accompanying descripticn for specific informatim regarding

-

FIGURE l-l. H O W TO USE THE ILLUSTRATED PARTS BREAKDOWN (Sheet 3 of 3)

1-4


l-10 UNITS PER ASSEMBLY COLUMN. This column lists the number of units required for one next higher assembly. The quantities specified, therefore, are

not necessarily the total number used per installation or end item. AR denotes that parts should be selected as required. The term REF denotes parts which are listed for reference purposes. Units per assembly for other REF items are shown on the appropriate figures referenced in the DESCRIPTION column. NP denotes parts which are not procurable.

l-11 USE ON CODE COLUMN. Code letters in this column show variations in parts on two or more similar assemblies. Parts peculiar to a particular assembly

are identified by the same code letter as the main assembly; common parts are uncoded.

1-12 NUMERICAL INDEX SECTION (When Included)

1-13 The Numerical Index Section contains an alphanumerical listing of parts and/or drawings that are listed in the Group Assembly Parts List. Standard

hardware items are not Included. Alphabetical part identifiers are listed first, followed by numerical listing. The index is arranged in order of precedence beginning on the extreme left-hand (first) position as follows:

Letters A through Z

Numbers 0 through 9

l-1.4 L- SECOND AND SUCCEEDING POSITION ARRANGEMENT. The order of precedence in continuing the part number arrangement in the second and succeeding posl-

tions of the part number from left to right is as follows:

(1) Space (blank column) (5) Letters A through Z

(2) Diagonal (slant) (6) Numbers 0 through 9

(3) Point (period)

(4) Dash (-)

1-15 ADDITIONAL PARTS LISTS (SECTIONS)(When Included)

1-16 Additional informative lists, such as Recommended Spare Parts List and Fuse List, follow the Graup Assembly Parts List Section or Numerical Index

Section (as applicable).

1-17 HOW TO USE THE ILLUSTRATED PARTS BREAKDOWN

1-18 If the item part number is known, turn to the Numerical Index for the applicable figure and index number. Locate the illustration and descrip-

tion of the part in the Group Assembly Parts List, using the figure and index number.

1-19 If the item part number is unknown, turn to the List of Illustrations and locate the figure and breakdown on which the part appears. Identify the

part on the Illustration and use Its figure and index number to find the part number and description in the Illustrated Parts Breakdown.

l-5


l-20 CATALOG NUMBERS VERSUS PART NUMBERS

l-21 Certain product line equipment systems are coded with catalog numbers in -- addition to part numbers. These catalog numbers are listed in the Group

Assembly Parts List Section(s) under the system part numbers in parentheses. Catalog numbers are also cross-referenced in the Numerical Index Section (See Figure l-2).

l-6


JOINT TORQUE SYSTEM, ENGLISH/S1 UNITS

EACH JOINT TORQUE SYSTEM INCLUDES: l Desired Dial Capacity in Ft. Lbs.. based on Tong Handle Length l 6 Fluid-filled Gauge. l Desired Load Cell with 2 Shackles. l Hand Pump and Fluid. In addition, hydraulic hose is shipped with each system. based on the mounting configuratlons as specified below: Box Mount . . . TongClampMount ,............. ..::

.25 of 5.000 psi WP Hose. 1 1. .~~~:...~~...5of5,000psiWPHose.

Tong Bracket Mount .5 of 5.000 psi WP Hose. PanelMount ..:. .:. .::::: ;.1:1:::::.25of5,OOOpslWPHose.

SPECIFICATION VARIABLES Dial (Ft. Lbs.) Load Cell (Inches) Handle Length (Inches) Mounting Configuration

AVAILABILITY CHART

Dial Load Handle Ft. Lbs.

12,000 15,000 20,000 25,000 30,000

50,000 100.000

17.000 ; Box Mount ~-. 24. 36. 42. 48 21.000 Tong Clamp Moclnt 27.000 I

4 00 ~ Tong Bracket Mount

34.000 Panel Mount 40.000

~ I --

68.000 4.oc A-- ---.. --- 36. 42. 48 - -- .--- 135.000 6.53 48. 52 __-- -..... -- _~

SPECIFYING CATALOG NUMBER FOR ORDERING PURPOSES (1) Verify that your requirement can be met by referring to the availability chart above. (2) Using the example below as a guide. develop your own catalog number. using the ordering codes table,

EXAMPLE: JT-01 O-400-24-PM

Dia


JOINT TORQUE SYSTEM, ENGLISH& UNITS (Contd.)

ORDERING CODES

Dials 2,500 Ft. Lbs. 5,000 Ft. Lbs. 7,500 Ft. Lbs.

10,000 Ft. Lbs. 12,000 Ft. Lbs. 15,000 Ft. Lbs. 20,000 Ft. Lbs. 25,000 Ft. Lbs. 30.000 Ft. Lbs. 50.000 Ft. Lbs.

Load Handle Mounting Codes Cells Codes Length Codes Configurations Codes

2.5 3.68 Load Cell 368-gHdl_ Length 24 Box Mount BM 5.0 4.00 Load Cell 400 36 Hdl Length 36 Tong Clamp Mount TCM 7.5 6.53 Load Cell 653 42 Hdl. Length 42 Tong Bracket Mount TBM 010 48 Hdl. Length 46 Panel Mount PM 012 52 Hdl. Length 52 015 020 025 030 050

FIGURE 1-2. CATALOG JUMBERING SYSTEM (ENGLISH/S1 UNITS)(Cont'd.)

.-

l-8

INSTRUCTION MANUAL 26-62 SECTION II

GROUP ASSEMBLY PARTS LIST (ENGLISH)

FIGURE'2-1. JOINT TORQUE (JT) SYSTEM (ENGLISH), 2,500 TO 5,000 FT-LB, BOX MOUNT

FIG. SI UNITS USE INDEX PART NUMBER DESCRIPTION PER ON

NO. (CATALOG NO.) 1234567 ASSY CODE

2-1- 213394-103 (JT-2.5-368-42-BM)

213394-104 (JT-2.5-400-48-BM)

213396-103 (JT-2.5-400-42-BM)

213396-104 (JT-2.5-400-48-BM)

JT SYSTEM (ENGLISH), Complete with 2500 . . . . 1 A ft-lb dial for 42 in. handle, 6 in. fluid filled gauge, box mount, 3.68 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 2500 . . . . 1 B ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 2500 . . . . 1 C ft-lb dial for 42 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 2500 . . . . 1 D ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft hose, hand pump and fluid.

2-l


- FIG. .& UNITS USE INDEX PART NUMBER DESCRIPTION PER ON -


2-l- 213398-101 (JT-5.0-368-24-BM)

213398-102 (JT-5.0-368-36-BM)

213400-101 (JT-5.0-400-24-BM)

-1 210658-125 -2 999205-104

999205-205

-3 212380-101 '

212365-101

-4 999393-025

-5 999321-320

-6 210134 -7 213426-103

213426-104

213428-103

213428-104

213430-101

213430-102

JT SYSTEM (ENGLISH), Complete with 5000 . . . ft-lb dial for 24 in. handle, 6 in. fluid filled gauge, box mount, 3.68 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid



. HOSE ASSY, 25 ft . . . . . . . . . . . . .

. SHACKLE, 7/8 in. shackle, 1 in. pin, . . . 6 l/2 ton

. SHACKLE, 1 in. shackle, 1 l/8 in. pin,. . . 16 ton

. LOAD CELL ASSY, Tension, free spin, . . . . 3.68 in. (See Figure 2-17 for details)

. LOAD CELL ASSY, Tension, free spin, . . . . 4.0 in. (See Figure 2-18 for details)

. BOLT, Hex hd, l/4-20 unc x l/2, cad . . . pl stl (AP)

. WASHER, Split lock, l/4 nom, cad . . . . . pl stl (AP)

BRACKET, 6 in., gauge, box mount . . . . . : GAUGE AND DAMPER ASSY, 2500 ft-lb, 3.68 . .

in. tension load cell, 42 in. handle, box mount (See Figure 2-20 for details)

. GAUGE AND DAMPER ASSY, 2500 ft-lb, 3.68 . in. tension load cell, 48 in. handle, box mount (See Figure 2-20 for details)




. GAUGE AND DAMPER ASSY, 5000 ft-lb, 3.68 in. tension load cell, 36 in. handle, box' mount (See Figure 2-20 for details)

. 1 E

. 1 F

. 1

. 1

. 1 A,E,F

. 1 B,C,D,G

. 1 A,E,F

- . 1 B,C,D

. 3

. 3

. 1

. 1

. 1

. 1

. 1

.l

. 1

2-2


FIG. & UNITS USE INDEX DESCRIPTION PER ON

NO. PART NUMBER 1234567 ASSY CODE

2-1- 213432-101 . GAUGE AND DAMPER ASSY, 5000 ft-lb, 4.0 . . . 1 G in. tension load cell, 24 in. handle, box mount (See Figure 2-20 for details)

-8 k 212450-102 .HANDPUMP . . . . . . . . . . . . . . . . . 1 -9 2 214359-101 . FLUID, Instrument (M-15) . . . . . . . . . . 1

*Not Illustrated

2-3


FIGURE'2-2. JOINT TORQUE (JT) SYSTEM (ENGLISH), 7,500 TO 10,000 FT-LBS, BOX MOUNT -

FIG. & UNITS USE INDEX PART NUMBER DESCRIPTION PER ON


2-2- 213402-101 (JT-7.5-368-24-BM)

213402-102 (JT-7.5-368-36-BM)

213402-103 (JT-7.5-368-42-BM)

213402-104 (JT-7.5-368-48-BM)


JT SYSTEM (ENGLISH), Complete with 7500 . . . ft-lb dial for 36 in. handle, 6 in. fluid filled gauge, box mount, 3.68 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid.


JT SYSTEM (ENGLISH), Complete with 7500 . . . ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, box mount, 3.68 in. piston type load cell with two shackles, 25 ft hose, hand pump and fluid.

1 A

1

1

1 D

2-4




2-2- 213404-101 (JT-7.5-400-24-BM)

213404-102 (JT-7.5-400-36-BM)

213404-103 (JT-7.5-400-42-BM)

213404-104 (JT-7.5-400-48-BM)

213406-101 (JT-OlO-368-24-BM)

213406-102 (JT-OlO-368-36-BM)

213406-103 (JT-OlO-368-42-BM)

213406-104 (JT-010-368-48-B?!)

213408-101 (JT-OlO-400-24-BM)

213408-102 (JT-OlO-400-36-BM)

JT

JT

JT

JT

JT

JT

JT

JT

JT

JT

SYSTEM (ENGLISH), Complete with 7500 . . . . 1 ft-lb dial for 24 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump fluid SYSTEM (ENGLISH), Complete with 7500 . 1 ft-lb dial for 36 in. handle, 6 in. fluid' filled gauge, box mount, 4.9 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid SYSTEM (ENGLISH), Complete with 7500 . . . 1 ft-lb dial for 42 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft hose, hand pump and fluid SYSTEM (ENGLISH), Complete with 7500 . . . 1 ft-lb dial for 48 in. handle, 6 in. fluid filled auge, box mount, 4.0 in. piston type load ce 1 with two shackles, 25 ft B hose, hand pump and fluid SYSTEM (ENGLISH), Complete with 10,000. . . 1 ft-lb dial for 24 in. handle, 6 in. fluid filled gauge, box mount, 3.68 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid SYSTEM (ENGLISH), Complete with 10,000 . . 1 ft-lb dial for 36 in. handle, 6 in. fluid filled gauge, box mount, 3.68 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid SYSTEM (ENGLISH), Complete with 10,000 . . 1 ft-lb dial for 42 in. handle, 6 in. fluid filled gauge, box mount 3.68 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid SYSTEM (ENGLISH), Complete with 10,000 . . 1 ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, box mount, 3.68 in. piston type load cell with two shackles, 25 ft hose, hand pump and fluid SYSTEM (ENGLISH), Complete with 10,000 . . 1 ft-lb dial for 24 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid SYSTEM (ENGLISH), Complete with 10,000 . . 1 ft-lb dial for 36 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid

E

F

G

H

I

J

K

L

M

N

2-5


FIG. & UNITS INDEX PART NUMBER DESCRIPTION

USE -.

NO. PER ON

(CATALOG NO.) 1234567 ASSY CODE

2-2-

-1 -2

-3

-4

-5

-6 -7

213408-103 (JT-OlO-400-42-BM)

213408-104 (JT-OlO-400-48-BM)

210658-125 999205-104

999205-205

212380

212365

999393-025

999321-320 *

210134 213434-101

213434-102

213434-103

213434-104

213436-101

213436-102

213436-103

213436-104

JT SYSTEM (ENGLISH), Complete with 10,000 . . 1 ft-lb dial for 42 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Compl,ete with 10,000 . . . 1 ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft hose, hand pump and fluid

. HOSE ASSY, 25 ft . . . . . . . . . . . . . . 1

. SHACKLE, 7/8 in. shackle, 1 in. pin, . . . . 2 6 l/2 tons

. SHACKLE, 1 in. shackle, 1 l/8 in. pin,. . . . 2 16 tons

. LOAD CELL ASSY, Tension free spin, :. . . . 1 3.68 in. (See Figure 2-17 for details)

. LOAD CELL ASSY, Tension free spin, . . . . . 1 4.0 in. (See Figure 2-18 for details)

. BOLT, Hex hd, cad pl stl, l/4-20 unc x . . . 3 l/2 in. lg (AP)

. WASHER, Splitlock, cad pl stl, l/4 . . . . 3 nom (AP)

BRACKET, 6 in. gauge box mount 1 : GAUGE AND DAMPER ASSY, 7500 ft-l&*3:68 : : : 1


. GAUGE AND DAMPER ASSY, 7500 ft-lb, 3.68 . . . 1 . tension load cell, 36 in. handle

Ex mount (See Figure 2-21 for details) . GAUGE AND DAMPER ASSY,'7500 ft-lb, 3.68 . . . 1


. GAUGE AND DAMPER ASSY, 7500 ft-lb, 3.68 . . . 1 in. tension load cell, 48 in. handle, box mount (See Figure 2-21 for details)





0

A,B,D,D I,J,K,L E,F,G,H M,N,O,P A,B,C,D I, J,K,L E,F,G,H M,N,O,P

.-

A

B

C

D

E

F

G

H

2-6




2-2- 213438-101

213438-102

213438-103

213438-104

213440-101

213440-102

213440-103

213440-104

-8 9~ 212450-102 -9 * 214359-101

. GAUGE AND DAMPER ASSY, 10,000 ft-lb, 3.68 in. tension load cell, 24 in. handle, box mount (See Figure 2-21 for details)





. GAUGE AND DAME'ER ASSY, 10,000 ft-lb, 4.0 in. tension load cell, 36 in. handle, box mount (See Figure 2-21 for details)



HANDPUMP................ : FLUID, Instrument (M-15) . . . . . 1 . .

. . 1 I

. . 1 J

. . 1 K

. . 1 L

. . 1 M

. . 1 N

. . 1 0

. . 1 P

. . 1 1

*Not Illustrated

2-7


FIGURE'2-3. JOINT TORQUE (JT) SYSTEM (ENGLISH), 12,000 TO 20,000 FT-LBS, BOX MOUNT



2-3- 213410-101 (JT-012-368-24-B?!)

213410-102 (JT-012-368-36-BM)

213410-103 (JT-012-368-42-BM)

213410-104 (JT-012-368-48-BM)

JT SYSTEM (ENGLISH), Complete with 12,000 . . ft-lb dial for 24 in. handle, 6 in. fluid filled gauge, box mount, 3.68 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH),Complete with 12,000 . . ft-lb dial for 36 in. handle, 6 in. fluid filled gauge, box mount, 3.68 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 12,000 . . ft-lb dial for 42 in. handle, 6 in. fluid filled gauge, box mount, 3.68 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 12,000 . . ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, box mount, 3.68 in. pistion type load cell with two shackles, 25 ft hose, hand pump and fluid

1 A

1

1 C

1 D

2-8


FIG. 6r UNITS ZlSE INDEX PART NUMBER DESCRIPTION PER ON


2-3- 213412-101 (JT-012-400-24-BM)

213412-102 (JT-012-400-36-BM)

213412-103 (JT-012-400-42-BM)

213412-104 (JT-012-400-4%BM)

213414-101 (JT-015-400-24-BM)

213414-102 (JT-015-400-36-BM)

213414-103 (JT-015-400-42-BM)

213414-104 (JT-015-400-48-BM)

213416-101 (JT-02G-400-24-BM)

213416-102 (JT-020-400-36-BM)

JT SYSTEM (ENGLISH), Complete with 12,000 . . . 1 E ft-lb dial for 24 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 12,000 . . . 1 F ft-lb dial for 36 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 12,000 . . . 1 G ft-lb dial for 42 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 12,000 . . . 1 H ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 15,000 . . . 1 ft-lb dial for 24 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid


JT SYSTEM (ENGLISH), Complete with 15,000 . . , 1 ft-lb dial for 42 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 15,000 . . . 1 ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft hose, hand pump and fluid.



2-9


FIG. & UNITS USE INDEX PART NUMBER DESCRIPTION PER ON -


2-3-

-1 -2

-3

-4 999393-025

-5 999321-320

-6 210134 -7 213442-101

213416-103 (JT-020-400-42-BM)

213416-104 (JT-020-400-48-BM)

210658-125 999205-104 999205-205

212380

212365

213442-102

213442-103

213442-104

213444-101

213444-102

213444-103

213444-104

JT SYSTEM (ENGLISH), Complete with 20,000. . . 1 ft-lb dial for 42 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 20,000. . . 1 ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft hose, hand pump and fluid

. HOSE ASSY, 25 ft . . . . . . . . . . . . . . 1

. SHACKLE, 718 in. shackle, 1 in. pin, . . . . 2

. SHACKLE, 1 in. shackle, 1 l/8 in. pin, . . . 2 16 tons

. LOAD CELL ASSY, Tension free spin, 3.68. . . 1 in. (See Figure 2-17 for details)

. LOAD CELL ASSY, Tension free spin, 4.0 . . . 1 in. (See Figure 2-18 for details)

. BOLT, Hex hd, cad pl stl, l/4-20 uric x . . 3 l/2 in. lg (AP)

. WASHER, Splitlock, cad pl stl, l/4 . . . . 3 nom (AP)

BRACKET, 6 in. gauge box mount . . . . . . . 1 : GAUGE AND DAMPER ASSY, 12,000 ft-lb, . . . . 1

3.68 in. tension load cell, 24 in. handle, box mount (See Figure 2-22 for details)

. GAUGE AND DAMPER ASSY, 12,000 ft-lb, . . . . 1 3.68 in. tension load cell, 36 in. handle, box mount (See Figure 2-22 for details)





. GAUGE AND DAMPER ASSY, 12,000 ft-lb . . . . 1 4.0 in. tension load cell, 42 in. handle, box mount (See Figure 2-22 for details)

. GAUGE AND DAMPER ASSY, 12,000 ft-lb . l . . .l 4.0 in. tension load cell, 48 in. handle, box mount (See Figure 2-22 for details)

0

A,B,C,D E,F,G,H,I, J,K,L,M,N, o,p

A,B,C,D

E,F,G,H,I J,K,L,M,N, o,p

-

A

B

C

D

E

F

G

H

2-10




2-3- 213446-101

213446-102

213446-103

213446-104

213448-101

213448-102

213448-103

213448-104 1

-89~ 212450-102 -g* 213359-101

. GAUGE AND DAMPER ASSY, 15,000 ft-lb, . . . . 4.0 in. tension load cell, 24 in. handle, box mount (See Figure 2-22 for details)




. GAUGE AND DAMkER ASSY, 20,000 ft-lb, . . . . 4.0 in. tension load cell, 24 in. handle, box mount (See Figure 2-22 for details)

. GAUGE AND DAMPER ASSY, 20,000 ft-lb, . . . . 4.0 in. tension load cell, 36 in handle, box mount (See Figure 2-22 for details)



HANDPUMP.. . . . . . . . . . . . . . . . : FLUID, Instrument (M-15). . . . . . . . . .

1 I

1 J

1 K

1 L

1 M

1 N

1 0

1 P

1 1

*Not Illustrated

2-11


i

FIGURE 2-4. JOINT TORQUE (JT) SYSTEM (ENGLISH), 25,000 TO 100,000 FT-LBS, BOX MOUNT



2-4- 213418-101 (JT-025-400-24-BM)

213418-102 (JT-025-400-36-BM)

213418-103 (JT-025-400-42-BM)

213418-104 (JT-025-400-48-BM)

B

JT SYSTEM (ENGLISH), Complete with 25,000 . . . 1 A ft-lb dial for 24 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid



JT SYSTEM (ENGLISH), Complete with 25,000 . . . 1 ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft hose, hand pump and fluid

C

D

2-12




2-4- 213420-101 (JT-030-400-24-BM)

213420-102 (JT-030-400-36-BM)

213420-103 (JT-030-400-42-BM)

213420-104 (JT-030-400-48-BM)

213422-101 (JT-050-400-36-BM)

213422-102 (JT-050-400-42-BM)

213422-103 (JT-050-400-48-BM)

213424-101 (JT-lOO-653-48-BM)

213424-102 (JT-lOO-653-52-BM)

-1 210658-125 -2 999205-205




JT SYSTEM (ENGLISH), Complete with 30,000 . . . 1 ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. piston type load cell with two shackles, 25 ft hose, hand pump and fluid



JT SYSTEM (ENGLISH), Complete with 50,000 . . . 1 ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, box mount, 4.0 in. pistion type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 100,000. . . 1 ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, box mount, 6.53 in. piston type load cell with two shackles, 25 ft hose, hand pump and fluid.

JT SYSTEM (ENGLISH), Complete with 100,000. . . 1 ft-lb dial for 52 in. handle, 6 in. fluid filled gauge, box mount, 6.53 in. piston type load cell with two shackles, 25 ft high pressure hose, hand pump and fluid

. HOSE ASSY, 25 ft . . . . . . . . . . . . . . 1

. SHACKLE, 1 in. shackle, 1 l/8 in. pin, . . . 2 16 tons

E

F

G

H

I

J

K

L

M

2-13


FIG. & UNITS USE INDEX DESCRIPTION PER ON --


2-4-3 212365

212371-101

-4 999393-025

-5 999321-320

-6 210134 -7 213450-101

213450-102

213450-103

213450-104

213452-101

213452-102

213452-103

213452-104

213454-101

213454-102

213454-103

213456-101

213456-102

-8* 212450-102 -9* 214359-101

*Not Illustrated

2-14

. LOAD CELL ASSY, Tension free spin, . . . . . 1 A thru K 4.0 in. (See Figure 2-18 for details)

. LOAD CELL ASSY, Tension free spin, . . . . . 1 L,M 6.53 in. (See Figure 2-19 for details)

. BOLT, Hex hd, cad pl stl, l/4-20 unc x . . . 3 x l/2 in. lg (AP)

. WASHER, Splitlock, cad pl stl, l/4 . . . . . 3 nom (AP)

BRACKET, 6 in. gauge box mount .l : GAUGE AND DAMPER ASSY, 25,000 ft&,'4:0' : . 1 A


. GAUGE AND DAMPER ASSY, 25,000 ft-lb, 4.0 . . 1 B in. tension load cell, 36 in. handle, box mount (See Figure 2-23 for details)

. GAUGE AND DAMPER ASSY, 25,000 ft-lb, 4.0 . . 1 C in. tension load cell, 42 in. handle, box mount (See Figure 2-23 for details)

. GAUGE AND DAMPER ASSY, 25,000 ft-lb, 4.0 . . 1 D in. tension load cell, 48 in. handle, box mount (See Figure 2-23 for details)

. GAUGE AND DAMPER ASSY, 30,000 ft-lb, 4.0 . . 1 E in. tension load cell, 24 in. handle, box mount (See Figure 2-23 for details)

. GAUGE AND DAMPER ASSY, 30,000 ft-lb, 4.0 . . 1 F in. tension load cell, 36 in. handle, box mount (See Figure 2-23 for details)

. GAUGE AND DAMPER ASSY, 30,000 ft-lb, 4.0 . . 1 G in. tension load cell, 42 in. handle, box mount (See Figure 2-23 for details)

. GAUGE AND DAMPER ASSY, 30,000 ft-lb, 4.0 . . 1 H in. tension load cell, 48 in. handle, box mount (See Figure 2-23 for details)

. GAUGE AND DAMPER ASSY, 50,000 ft-lb, 4.0 . . 1 I in. tension load cell, 36 in. handle, box mount (See Figure 2-23 for details)

. GAUGE AND DAMPER ASSY, 50,000 ft-lb, 4.0 . . 1 J in. tension load cell, 42 in. handle, box mount (See Figure 2-23 for details)

. GAUGE AND DAMPER ASSY, 50,000 ft-lb, 4.0 . . 1 K in. tension load cell, 48 in. handle, box mount (See Figure 2-23 for details)

. GAUGE AND DAMPER ASSY, 100,000 ft-lb, 6.53 . 1 L in. tension load cell, 48 in. handle, box mount (See Figure 2-23 for details)

. GAUGE AND DAMPER ASSY, 100,000 ft-lb, 6.53 . 1 M in. tension load cell, 52 in. handle, box mount (See Figure 2-23 for details)

HmpU$fp..................l : FLUID, Instrument (M-15). . . . . . . . . . . 1


FIGURE 2-5. JOINT TORQUE (JT) SYSTEM (ENGLISH), 2,500 TO 5,000 FI-LBS, CLAMP MOUNT

-FIG. & UNITS USE INDEX PART NUMBER DESCRIPTION PER ON


2-5- 213900-103 (JT-2.5-368-42-TCM)

213900-104 (JT-2.5-368-48-TCM)

213902-103 (JT-2.5-400-42-TCM)

213902-104 (JT-2.5-400-48-TCM)

JT SYSTEM (ENGLISH), Complete with 2500 . . . 1 A ft-lb dial for 42 in. handle, 6 in. fluid filled gauge, clamp mount, 3.68 in. piston type load cell with two shackles, 5 ft hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 2500 . . . 1 B ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, clamp mount, 3.68 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 2500 . . . 1 C ft-lb dial for 42 in. handle, 6 in. fluid filled gauge, clamp mount, 4.0 in. piston type load cell with two shackles, 5 ft hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 2500 . . . 1 D ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, clamp mount, 4.0 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

2-15


---___ FIG. & UNITS USE INDEX PART NUMBER DESCRIPTION PER ON -

NO. (CATALOG NO.) 1234567 ASSY CODE -

2-5- 213904-101 (JT-5.0-368-24-TCM)

213904-102 (JT-5.0-368-36-TCM)

213906-101 (JT-5.0-400-24-TCM)

-1 210658-105 -2 999205-104

999205-205

-3 212380-101

212365-101

-4 999279-300

-5 999383-065

-6 213426-103

213426-104

213428-103

213428-104

213430-101

213430-102

213432-101

JT SYSTEM (ENGLISH), Complete with 5000 . . . ft-lb dial for 24 in. handle, 6 in. fluid filled gauge, clamp mount, 3.68 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid



. HOSE ASSY, 5 ft . . . . . . . . . . . . . .

. SHACKLE, 7/8 in. shackle, 1 in. pin, . . . 6 l/2 tons

. SHACKLE, 1 in. shackle, 1 l/8 in. pin, . . 16 tons

. LOAD CELL ASSY, Tension free spin, . . . . 3.68 in. (See Figure 2-17 for details)

. LOAD CELL ASSY, Tension free spin, . . . . 4.0 in. (See Figure 2-18 for details)

. NUT, Elastic stop, cad pl stl, lo-32 . . . unf (AP)

. SCREW, Fillister hd, cad pl stl, lo- . . . 32 unf-2A x 1.25 in. lg (AP)

. GAUGE AND DAMPER ASSY, 2500 ft-lb, 3.68 . . in. tension load cell, 42 in. handle, clamp mount (.See Figure 2-20 for details)

. GAUGE AND DAMPER ASSY, 2500 ft-lb, 3.68 . . in. tension load cell, 48 in. handle, clamp mount (See Figure 2-20 for details)






1 E

1

1

1 2 A,B,E,F

2 C,D,G

1 A,B,E,F

1 C,D,G-.

3

3

1

2-16

.-_




2-5-7 999244-062 . SCREW, Set socket head, 5/8-11 ....... 2 unc - 2A x 3.0 in. lg (AP)

-8 210127 . BRACKET, 6 in. gauge ............ 1 -9 ?: 212450-102 HANDPUMP ................ ..l -10 k 214359-101 : FLUID, Instrument (M-15) .......... 1

;kNot Illustrated

2-17


FIGURE'2-6. JOINT TORQUE (JT) SYSTEM (ENGLISH), 7,500 TO 10,000 FT-LBS, CLAMP MOUNT



2-6- 213908-101 (JT-7.5-368-24-TCM)

213908-102 (JT-7.5-368-36-TCM)

213908-103 (JT-7.5-368-42-TCM)

213908-104 (JT-7.5-368-48-TCM)


JT SYSTEM (ENGLISH), Complete with 7500 . . . ft-lb dial for 36 in. handle, 6 in fluid filled gauge, clamp mount, 3.68 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 7500 . . . ft-lb dial for 42 in. handle, 6 in. fluid filled gauge, clamp mount, 3.68 in. piston type load cell with two shackles, 5 ft hose, hand pump and fluid


1 A

1

1

1 D

2-18



NO. (CATALOG NO.) 1234567 ASSY CODE - _--

2-6- 213910-101 (JT-7.5-400-24-TCM)

213910-102 (JT-7.5-400-36-TCM)

213910-103 (JT-7.5-400-42-TCM)

213910-104 (JT-7.5-400-48-TCM)

213912-101 (JT-OlO-368-24-TCM)

213912-102 (JT-OlO-368-36-TCM)

213912-103 (JT-OlO-368-42-TCM)

213912-104 (JT-OlO-368-48-TCM)

213914-101 (JT-OlO-400-24-TCM)

213914-102 (JT-OlO-400-36-TCM)



JT SYSTEM (ENGLISH), Complete with 7500 . . . ft-lb dial for 42 in. handle, 6 in. fluid filled gauge, clamp mount, 4.0 in. piston type load cell with two shackles, 5 ft hose, hand pump and fluid


JT SYSTEM (ENGLISH), Complete with 10,000 . . ft-lb dial for 24 in. handle, 6 in. fluid filled gauge, clamp mount, 3.68 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid


JT SYSTEM (ENGLISH), Complete with 10,000 . . ft-lb dial for 42 in. handle, 6 in. fluid filled gauge, clamp mount, 3.68 in. piston type load cell with two shackles, 5 ft hose, hand pump and fluid




1 E

1 F

1

1 H

1

1

1

1

1

1

2-19



NO. (CATALOG NO.) 1234567 ASSY CODE _.-

2-6- 213914-103 (JT-OlO-400-42-TCM)


JT SYSTEM (ENGLISH), Complete with 10,000 . .

0

'213914-104 (JT-OlO-400-48-TCM)

-1 210658-105 -2 999205-104

999205-205

-3 212380

212365

-4 999279-300

-5 999383-065 '

-6 213434-101

213434-102

.

.

.

.

.

.

.

.

.

.

ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, clamp mount, 4.0 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

HOSE ASSY, 5 ft . . . . . . . . . . . . . . SHACKLE, 718 in. shackle, 1 in. pin, . . .

6 l/2 tons SHACKLE, 1 in. shackle, 1 l/8 in. pin, . .

16 tons LOAD CELL ASSY, Tension free spin, . . . .

3.68 in. (See Figure 2-17 for details) LOAD CELL ASSY, Tension free spin, . . . .

4.0 in. (See Figure 2-18 for details) NUT, Elastic stop, cad pl stl, lo-32 . . .

unf W)

APB, C,D I,J,K,L E,F,G,H M,N,O,P A,B,C,D I,J,K,L E,F,G,H M,N,O,P

SCREW, Fillister hd, cad pl stl, lo-32 . . unf-2A x 1.25 in lg (AP)

GAUGE AND DAMPER ASSY, 7500 ft-lb, 3.68 . . in. tension load cell, 24 in. handle, clamp mount (See Figure 2-21 for details)



- A

B

213434-103 C

213434-104 . GAUGE AND DAMPER ASSY, 7500 ft-lb, 3.68 . . in. tension load cell, 48 in. handle, clamp mount (See Figure 2-21 for details)

D


E


1

1

1 2

2

1

1

3

3

1

1

1

1

1

1

1

1

F


G


H

2-20




2-6- 213438-101

213438-102

213438-103

213438-104

213440-101

213440-102

213440-103

213440-104 '

-7 999244-062

-8 210127 -g* 212450-102 -lo* 214359-101

. GAUGE AND DAMPER ASSY, 10,000 ft-lb, 3.68 . . 1 in. tension load cell, 24 in. handle, clamp mount (See Figure 2-21 for details)








. SCREW, Set socket head, 518-11 unc - 2A . . . 2 x 3.0 in. lg (AP)

. BRACKET, 6 in. gauge . . . . . . . . . . . . 1

.HANDPUMP..................l

. FLUID, Instrument (M-15) . . . . . . . . . . 1

*Not Illustrated

2-21


FIGURE 2-7. JOINT TORQUE (JT) SYSTEM (ENGLISH), 12,000 TO 20,000 FT-LBS, CLAMP MOUNT

FIG. fx UNITS USE INDEX PART NUMBER DESCRIPTION PER ON


2-7- 213916-101 (JT-012-368-24-TCM)

213916-102 (JT-012-368-36-TCM)

213916-103 (JT-012-368-42-TCM)

213916-104 (JT-012-368-48-TCM)


JT SYSTEM (ENGLISH), Complete with 12,000 . . ft-lb dial for 36 in. handle, 6 in. fluid filled gauge, clamp mount, 3.68 piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid



1 A

1

1

1 D

2-22




2-7- 213918-101 (JT-012-400-24-TCM)

213918-102 (JT-012-400-36-TCM)

213918-103 JT-012-400-42-TCM)

213918-104 (JT-012-400-48-TCM)

213920-101 (JT-015-400-24-T&)

213920-102 (JT-015-400-36-TCM)

213920-103 (JT-015-400-42-TCM)

213920-104 (JT-015-400-48-TCM)

213922-101 (JT-020-400-24-TCM)

213922-102 (JT-020-400-36-TCM)


JT SYSTEM (ENGLISH), Complete with 12,000 . l ft-lb dial for 36 in. handle, 6 in. fluid filled gauge, clamp mount, 4.0 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid


JT SYSTEM (ENGLISH), Complete with 12,000 . l ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, clamp mount, 4.0 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 15,000 * * ft-lb dial for 24 in. handle, 6 in. fluid filled gauge, clamp mount, 4.0 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid






1 E

1 F

1 G

1 H

1

1

1

1

1 M

1

2-23


FIG. & INDEX PART NUMBER DESCRIPTION

NO. (CATALOG NO.) 1234567

UNITS USE -. PER ON

ASSY CODE

2-7- 213922-103 (JT-020-400-42-TCM)

213922-104 (JT-020-400-48-TCM)

-1 210658-105 -2 999205-104

999205-205

-3 212380

212365

-4 999279-300

-5 999383-065

-6 213442-101

213442-102

213442-103

213442-104

213444-101

213444-102

213444-103

213444-104


JT SYSTEM (ENGLISH), Complete with 20,000 . .

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, clamp mount, 4.0 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

HOSE ASSY, 5 ft . . . . . . . . . . . . . . SHACKLE, 7/8 in. shackle, 1 in. pin, . . .

6 l/2 tons SHACKLE, 1 in. shackle, 1 l/8 in. pin, . .

16 tons LOAD CELL ASSY, Tension free spin, . . . .

3.68 in. (See Figure 2-17 for details) LOAD CELL ASSY, Tension free spin, . . . .

4.0 in. (See Figure 2-18 for details) NUT, Elastic stop, cad pl stl, lo-32 . . .

unf (AP) SCREW, Fillister hd, cad pl stl, lo-32 . .

unf - 2A x 1.25 in. lg (AP) GAUGE AND DAMPER ASSY, 12,000 ft-lb, 3.68 .

in. tension load cell, 24 in. handle, clamp mount (See Figure 2-22 for details)

GAUGE AND DAMPER ASSY, 12,000 ft-lb, 3.68 . in. tension load cell, 36 in. handle, clamp mount (See Figure 2-22 for details)







1

1

1 2

2

1

1

3

3

1

1

1

1

1

1

1

1

0

A,B,C,D I,J,K,L E,F,G,H M,N,O,P A,B,C,D I,J,K,L E,F,G,H M,N,O,P

-_

A

B

C

D

E

F

G

H

2-24


FIG. 6 UNITS USE INDEX DESCRIPTION PER ON


2-7- 213446-101

213446-102

213446-103

213446-104

213448-101

213448-102

213448-103

213448-104 '

-7 999244-062

-8 210127 -9" 212450-102 -10" 214359-101

. GAUGE AND DAMPER ASSY, 15,000 ft-lb, 4.0 . . l in. tension load cell, 24 in. handle, clamp mount (See Figure 2-22 for details)



. GAUGE AND DAMPER ASSY, 15,000 ft-lb, 4.0 . . l in. tension load cell, 48 in. handle, clamp mount (See Figure 2-22 for details)

. GAUGE AND DAME'ER ASSY, 20,000 ft-lb, 4.0 . . 1 in. tension load cell, 24 in. handle, clamp mount (See Figure 2-22 for details)

. GAUGE AND DAMPER ASSY, 20,000 ft-lb, 4.0 . l in. tension load cell, 36 in. handle, clamp mount (See Figure 2-22 for details)



. SCREW, Set, socket head, 5/8-11 unc - 2A . . 2 x 3.0 in. lg (AP)

. BRACKET, 6 in. gauge . . . . . . . . . . . . 1 HANDPUMP . . . . . . . . . . . . . . . . . 1

: FLUID, Instrument (M-15) . . . . . . . . . . 1

*Not Illustrated

2-25


26

6'

-62, -2

8

FIGURE 2-8. JOINT TORQUE (JT) SYSTEM (ENGLISH), 25,000 TO 100,000 FT-LBS, CLAMP MOUNT .-


NO. (CATALOG No.) 1234567 ASSY CODE

2-8- 213924-101 (JT-025-4OO-24-TCM)

213924-102 (JT-025-400-36-TCM)

213924-103 (JT-025-400-42-TCM)

213924-104 (JT-025-400-48-TCM)





1 A

1 B

1 C

1 D

2-26


FIG. h UNITS USE INDEX PART NUMBER DESCRIFTION PER ON

NO. (CATALOG ~0.) 1234567 ASSY CODE

2-8- 213926-101 (JT-030-400-24-TCM)

213926-102 (JT-030-400-36-TCM)

213926-103 (JT-030-400-42-TCM)

213926-104 (JT-030-400-48-TCM)

213928-101 (JT-050-400-36-TCM)

213928-102 (JT-050-400-42-TCM)

213928-103 (JT-050-400-48-TCM)

213930-101 (JT-lOO-653-48-TCM)

213930-102 (JT-lOO-653-52-TCM)

-1 210658-105 -2 999205-205



JT SYSTEM (ENGLISH), Complete with 30,000 . . ft-lb dial for 42 in. handle, 6 in. fluid filled gauge, clamp mount, 4.0 in. piston type load cell with two shackles, 5 ft hose, hand pump and fluid.



JT SYSTEM (ENGLISH), Complete with 50,000 . . ft-lb dial for 42 in. handle, '6 in. fluid filled gauge, clamp mount, 4.0 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid


JT SYSTEM (ENGLISH), Complete with 100,000. . ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, clamp mount, 6.53 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 100,000. . ft-lb dial for 52 in. handle, 6 in. fluid filled gauge, clamp mount, 6.53 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

. HOSE ASSY, 5 ft . . . . . . . . . . . . . .


1 E

1 F

1 G

1 H

1

1

1

1

1

1 2

2-27


FIG. & UNITS USE INDEX DESCRIFTION PER ON -

NO. PART NUMBER 1234567 AS.9 CODE

2-8-3 212365

212371-101

-4 999279-300

-5 999383-065

-6 213450-101

213450-102

213450-103

213450-104

213452-101

213452-102

213452-103

213452-104

213454-101

213454-102

213454-103

213456-101

213456-102

. LOAD CELL ASSY, Tension free spin, . . . . . 4.0 in. (See Figure 2-17 for details)

. LOAD CELL ASSY, Tension free spin, . . . . . 6.53 in. (See Figure 2-18 for details)

. NUT, Elastic stop, cad pl stl, lo-32 . . . . unf (AP)

. SCREW, Fillister hd, cad pl stl, lo- . . . . 32 unf-2A x 1.25 in. lg (AP)

. GAUGE AND DAMPER ASSY, 25,000 ft-lb, 4.0 . . in. tension load cell, 24 in. handle, clamp mount (See Figure 2-23 for details)




. GAUGE AND DAM!='ER ASSY, 30,000 ft-lb, 4.0 . . in. tension load cell, 24 in. handle, clamp mount (See Figure 2-23 for details)


. GAUGE AND DAMPER ASSY, 30,000 ft-lb, 4.0. . in. tension load cell, 42 in. handle, clamp mount (See Figure 2-23 for details)





. GAUGE AND DAMPER ASSY, 100,000 ft-lb, 6.53. in. tension load cell, 48 in. handle, clamp mount (See Figure 2-23 for details)

. GAUGE AND DAMPER ASSY, 100,000 ft-lb, 6.53. in. tension load cell, 52 in. handle, clamp mount (See Figure 2-23 for details)

1 A thru K

1 L,M

3

3

1 A

1

1

1

1 E

1 F -

1

2-28




2-8-7 999244-062 . SCREW, Set, socket head, 518-11 unc- . . . . 2 2A x 3.0 in. lg (AP)

-8 210127 . BRACKET, 6 in. gauge . . . . . . . . . . . . 1 -9" 212450-102 . HANDPUMP . . . . . . . . . . . . . . . . . 1 -lo?; 214359-101 . FLUID, Instrument (M-15) . . . . . . . . . . 1

f;Not Illustrated

2-29


FIGURE'2-9. JOINT TORQUE (JT) SYSTEM (ENGLISH), 2,500 TO 5,000 FT-LBS, TONG MOUNT (90) -


NO. (CATALOG ~0.) 1234567 ASSY CODE

2-9- 213932-103 JT SYSTEM (ENGLISH), Complete with 2500 . . . 1 A (JT-2.5-368-42-TBM) ft-lb dial for 42 in. handle, 6 in. fluid

filled gauge, tong mount (900), 3.68 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

213932-104 JT SYSTEM (ENGLISH), Complete with 2500 . . . 1 B (JT-2.5-368-48-TBM) ft-lb dial for 48 in. handle, 6 in. fluid


213934-103 JT SYSTEM (ENGLISH), Complete with 2500 . . . 1 (JT-2.5-400-42-TBM) ft-lb dial for 42 in. handle, 6 in. fluid


C

2-30

INSTRUCTION FANUAL 26-62



2-9- 213934-104 (JT-2.5-400-48-TBM)

213936-101 (JT-5.0-368-24-TBM)

213936-102 (JT-5.0-368-36-TBM)

213938-101 (JT-5.0-400-24-TBM)

-1 210658-105 -2 999205-104

999205-205

-3 212380

212365

-4 999393-025

-5 999321-320

-6 213818 -7 213426-103

213426-104

213428-103

213428-104

JT SYSTEM (ENGLISH), Complete with 2500 . . . ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, tong mount (900), 4.0 piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 5000 . . . ft-lb dial for 24 in. handle, 6 in. fluid filled gauge, tong mount (900), 3.68 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 5000 . . . ft-lb dial for 36 in. handle, 6 in. fluid filled gauge, tong mount (900),. 3.68 in. piston type load cell with two shackles, 5 ft hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 5000 . . . ft-lb dial for 24 in. handle, 6 in. fluid filled gauge, tong mount (go'>, 4.0 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

. HOSE ASSY, 5 ft . . . . . . . . . . . . . .

. SHACKLE, 7/8 in. shackle, 1 in. pin, . . . 6 l/2 tons


. LOAD CELL ASSY, Tension free spin, * . * * 3.68 in. (See Figure 2-17 for details)

. LOAD CELL ASSY, Tension free spin, . . * . 4.0 in. (See Figure 2-18 for details)

. BOLT, Hex hd, cad pl stl, l/4-20 unc * * . l/2 in. lg (AP)

. WASHER, Splitlock, cad pl stl, l/4 * * . * nom (AP)

. BRACKET, 6 in. gauge, tong mount 90' . . .

. GAUGE AND DAMPER ASSY, 2500 ft-lb, 3.68 . . in. tension load cell, 42 in. handle, tong mount (See Figure 2-20 for details)

. GAUGE AND DAMPER ASSY, 2500 ft-lb, 3.68 - . in. tension load cell, 48 in. handle, tong mount (See Figure 2-20 for details)

. GAUGE AND DAMPER ASSY, 2500 ft-lb, 4.0 * * in. tension load cell, 42 in. handle, tong mount (See Figure 2-20 for details)

. GAUGE AND DAMPER ASSY, 2500 ft-lb, 4.0 . * in. tension load cell, 48 in. handle, tong mount (See Figure 2-20 for details)

1

1

1

1

1 2

2

1

1

3

3

1 1

1

1

1

D

E

F

G

A,B,E,F

C,D,G

A,B,E,F

C,D,G

2-31


FIG. & UNITS USE INDEX DESCRIPTION PER ON -


2-9- 213430-101 . GAUGE AND DAMPER ASSY, 5000 ft-lb, 3.68 . . . 1 E in. tension load cell, 24 in. handle, tong mount (See Figure 2-20 for details)

213430-102 . GAUGE AND DAMPER ASSY, 5000 ft-lb, 3.68 . . . 1 F in. tension load cell, 36 in. handle, tong mount (See Figure 2-20 for details)

213432-101 . GAUGE AND DAMPER ASSY, 5000 ft-lb, 4.0 . . . 1 G in. tension load cell, 24 in. handle, tong mount (See Figure 2-20 for details)

-a* 212450-102 .HANDPUMP..................l -9" 214359-101 . FLUID, Instrument (M-15) . . . . . . . . . . 1

*Not Illustrated

2-32

INSTRUCTION WNLJAL 26-62

FIGURE 2-10. JOINT TORQUE (JT) SYSTEM (ENGLISH), 7,500 TO 10,000 FT-LBS, TONG MOUNT (90)



2-10- 213940-101 (JT-7.5-368-24-TBM)

213940-102 (JT-7.5-368-36-TBM)

213940-103 (JT-7.5-368-42-TBM)

213940-104 (JT-7.5-368-48-TBM)

JT SYSTEM (ENGLISH), Complete with 7500 . . - ft-lb dial for 24 in. handle, 6 in. fluid filled gauge, tong mount (900), 3.68 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 7500 . . . ft-lb dial for 36 in. handle, 6 in. fluid filled gauge, tong mount (900>, 3.68 in. piston type load cell with two shackles, 5 ft hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 7500 . . . ft-lb dial for 42 in. handle, 6 in. fluid filled gauge, tong mount (900), 3.68 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 7500 . - . ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, tong mount (go'>, 3.68 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

1 A

1

1

1

2-33




2-10- 213942-101 (JT-7.5-400-24-TBM)

213942-102 (JT-7.5-400-36-TBM)

213942-103 (JT-7.5-400-42-TBM)

213942-104 (JT-7.5-400-48-TBM)

213944-101 (JT-OlO-368-24-TBM)

213944-102 (JT-OlO-368-36-TBM)

213944-103 (JT-OlO-368-42-TBM)

213944-104 (JT-OlO-368-48-TBM)

JT SYSTEM (ENGLISH), Complete with 7500 . . . ft-lb dial for 24 in. handle, 6 in. fluid filled gauge, tong mount (900>, 4.0 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 7500 . . . ft-lb dial for 36 in. handle, 6 in. fluid filled gauge, tong mount (9Oo), 4.0 in. piston type load cell with two shackles, 5 ft hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 7500 . . . ft-lb dial for 42 in. handle, 6 in. fluid filled gauge, tong mount (go'), 4.0 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 7500 . - . ft-lb dial for 48 in. handle, 6 in. fluid filled gauge, tong mount (900>, 4.0 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 10,000 a . ft-lb dial for 24 in. handle, 6 in. fluid filled gauge, tong mount (900), 3.68 in. piston type load cell with two shackles, 5 ft high pressure hose, hand pump and fluid

JT SYSTEM (ENGLISH), Complete with 10,000. . ft-lb di

Documents

26-62A