Click here to load reader
Upload
tarakan84
View
219
Download
0
Embed Size (px)
Citation preview
8/13/2019 25652-2000-3PS-NW00-N0008r001v2_0
http://slidepdf.com/reader/full/25652-2000-3ps-nw00-n0008r001v20 1/6
SPECIFICATION AMENDMENTTAKREER
PROJECT No 5636
Agreement no 10-5636-F-1
CARBON BLACK &DELAYED COKER PROJECT
COMPANY Doc. No. 5636-AMD-MW-008
ENG Doc. 25652-2000-3PS-NW00-N0008 Rev. 1
INTERNATIONAL BECHTEL CO. LTD.
THE DESIGN OR PART THEREOF CONTAINED IN THIS DOCUMENT WAS DEVELOPED FOR TAKREER FOR THE PROJECT AND REMAINS THE PROPERTY OF TAKREER. ALL
INTERNATIONAL BECHTEL CO. LTD. PROPRIETARY INFORMATION OR UNDERLYING INTELLECTUAL PROPERTY UTILIZED IN THE CREATION OF THE DESIGN OR INFORMATIONCONTAINED HEREIN SHALL REMAIN THE PROPERTY OF INTERNATIONAL BECHTEL CO. LTD..
ELECTRONIC DOCUMENTS, ONCE PRINTED, ARE NON-CONTROLLED AND MAY BECOME OUTDATED
25652-2000-3PS-NW00-N0008.doc Page 1 of 6
AMENDMENT TO
DESIGN GENERAL SPECIFICATION
DGS-MW-008
METALLIC MATERIALS
CARBON BLACK & DELAYED COKER PROJECTFRONT END ENGINEERING DESIGN
8/13/2019 25652-2000-3PS-NW00-N0008r001v2_0
http://slidepdf.com/reader/full/25652-2000-3ps-nw00-n0008r001v20 2/6
TAKREER SPECIFICATION AMENDMENT
METALLIC MATERIALS
TAKREER
PROJECT No 5636
Agreement no 10-5636-F-1
CARBON BLACK &
DELAYED COKER PROJECT
COMPANY Doc. No. 5636-AMD-MW-008
ENG Doc. 25652-2000-3PS-NW00-N0008Rev. 1
25652-2000-3PS-NW00-N0008.doc
ELECTRONIC DOCUMENTS, ONCE PRINTED, ARE NON-CONTROLLED AND MAY BECOME OUTDATED
Page 2 of 6
This page is a record of all revisions of this document. All previous issues are hereby
superseded and are to be destroyed.
NOTES:
Revisions after IFD are denoted as follows:
(a) By a vertical line in the right-hand margin against the revised text.
(b) By a triangle symbol for graphics, the revision number being denoted within the symbol.
Revision symbols are positioned adjacent to the revision.
(c) CHKD = Checked by, DISC = Discipline Lead, PEM = Project Engineer Manager,
PMC = Project Management Consultant.
APPROVEDREV DATE
REASON
FOR ISSUEBY CHKD
DISC PEM PMC COMPANY
1 15-Mar-11 IFF
0 28-Feb-11 IFA DS EBF DS / PW PC
Signed (Initials)
8/13/2019 25652-2000-3PS-NW00-N0008r001v2_0
http://slidepdf.com/reader/full/25652-2000-3ps-nw00-n0008r001v20 3/6
TAKREER SPECIFICATION AMENDMENT
METALLIC MATERIALS
TAKREER
PROJECT No 5636
Agreement no 10-5636-F-1
CARBON BLACK &
DELAYED COKER PROJECT
COMPANY Doc. No. 5636-AMD-MW-008
ENG Doc. 25652-2000-3PS-NW00-N0008Rev. 1
25652-2000-3PS-NW00-N0008.doc
ELECTRONIC DOCUMENTS, ONCE PRINTED, ARE NON-CONTROLLED AND MAY BECOME OUTDATED
Page 3 of 6
PARAGRAPHS REVISED THIS ISSUE
Para. No. Para. No. Para. No. Para. No.
Old 2.2 deleted
8/13/2019 25652-2000-3PS-NW00-N0008r001v2_0
http://slidepdf.com/reader/full/25652-2000-3ps-nw00-n0008r001v20 4/6
TAKREER SPECIFICATION AMENDMENT
METALLIC MATERIALS
TAKREER
PROJECT No 5636
Agreement no 10-5636-F-1
CARBON BLACK &
DELAYED COKER PROJECT
COMPANY Doc. No. 5636-AMD-MW-008
ENG Doc. 25652-2000-3PS-NW00-N0008Rev. 1
25652-2000-3PS-NW00-N0008.doc
ELECTRONIC DOCUMENTS, ONCE PRINTED, ARE NON-CONTROLLED AND MAY BECOME OUTDATED
Page 4 of 6
TABLE OF CONTENTS
1. SCOPE .......................................................................................................................................5
2. AMENDMENTS ........................................................................................................................5
2.1. Amendments to Section 1 – General ....................................................................................5
2.2. Amendments to Section 1.7 – Material Temperature Limits.................................................5
APPENDIX 1 - DGS-MW-008 REV 1................................... ...................................................6
8/13/2019 25652-2000-3PS-NW00-N0008r001v2_0
http://slidepdf.com/reader/full/25652-2000-3ps-nw00-n0008r001v20 5/6
TAKREER SPECIFICATION AMENDMENT
METALLIC MATERIALS
TAKREER
PROJECT No 5636
Agreement no 10-5636-F-1
CARBON BLACK &
DELAYED COKER PROJECT
COMPANY Doc. No. 5636-AMD-MW-008
ENG Doc. 25652-2000-3PS-NW00-N0008Rev. 1
25652-2000-3PS-NW00-N0008.doc
ELECTRONIC DOCUMENTS, ONCE PRINTED, ARE NON-CONTROLLED AND MAY BECOME OUTDATED
Page 5 of 6
1. SCOPE
This addendum specification and its attachments cover the requirements for Metallic Materials.
This specification should be read in conjunction with the attached Design general Specification
No DGS-MW-008 and the specific requirements of the requisition(s) in which it is incorporated.
2. AMENDMENTS
The following amendments and additions shall apply to Design General Specification Internal
Linings, DGS-MW-008 Revision 1.
All references to “DGS-XX-YYY” shall be replaced with “5636-AMD--XX-YYY” in the
following sections-.
All references to PROJECT shall be replaced “CARBON BLACK & DELAYED COKER
Project.”
2.1. Amendments to Section 1 – General
1.11 Definitions
The following definitions shall be added:
COMPANY – shall be defined as ABU DHABI OIL REFINING COMPANY (TAKREER)
CONTRACTOR – shall be defined as the organisation to which TAKREER award the
Engineering, Procurement and Construction (EPC) phase.
MANUFACTURER/VENDOR – shall be defined as the supplier of equipment and support
services for a particular piece of equipment/package.
2.2. Amendments to Section 1.7 – Material Temperature Limits
Add final sentence-
“The use of other materials for temperatures between -46ºC and -60ºC may beconsidered, provided the supplier can demonstrate adequate manufacturing
experience in satisfying the specification and the required code impact test
requirements at the specified MDMT. COMPANY approval is required for any
proposed substitution”.
8/13/2019 25652-2000-3PS-NW00-N0008r001v2_0
http://slidepdf.com/reader/full/25652-2000-3ps-nw00-n0008r001v20 6/6
TAKREER SPECIFICATION AMENDMENT
METALLIC MATERIALS
TAKREER
PROJECT No 5636
Agreement no 10-5636-F-1
CARBON BLACK &
DELAYED COKER PROJECT
COMPANY Doc. No. 5636-AMD-MW-008
ENG Doc. 25652-2000-3PS-NW00-N0008Rev. 1
25652-2000-3PS-NW00-N0008.doc
ELECTRONIC DOCUMENTS, ONCE PRINTED, ARE NON-CONTROLLED AND MAY BECOME OUTDATED
Page 6 of 6
APPENDIX 1 - DGS-MW-008 REV 1
DESIGN GENERAL SPECIFICATION
METALLIC MATERIALS – SELECTED STANDARDS