Embed Size (px)
DESCRIPTION
loc
Citation preview
Assessment Manager: PC2 Page 1 of 11
Schedule of Accreditation issued by
United Kingdom Accreditation Service
21 - 47 High Street, Feltham, Middlesex, TW13 4UN, UK
2526
Accredited to
ISO/IEC 17025:2005
ASSA ABLOY
Issue No: 017 Issue date: 18 October 2013
Test Laboratory
Chubb Locks Custodial Services
Well Lane
Wednesfield
WV11 1TB
Contact: Mr I Bridge
Tel: +44 (0) 1902 867730
Fax: +44 (0) 1902 867789
E-Mail: [email protected]
Website: www.assaabloy.co.uk
Testing performed at the above address only
DETAIL OF ACCREDITATION
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
BUILDING HARDWARE - cylinders for locks
Key strength BS EN 1303:2005
Durability tests BS EN 1303:2005 Corrosion resistance and
temperature BS EN 1303:2005
Corrosion resistance (Test of
operation at extremes of temperatures)
BS EN 1303:2005
Operation of the security
mechanism BS EN 1303:2005
Torque resistance of plug and/or
cylinder BS EN 1303:2005
Resistance to drilling BS EN 1303:2005 Resistance to attack by chisel BS EN 1303:2005 Resistance to attack by twisting BS EN 1303:2005 Resistance to attack by
plug/cylinder extraction BS EN 1303:2005
LOCKS and LATCHES for doors in buildings
Freedom of operation of follower and spring bolt action in rim and mortice locks and latches
BS 5872:1980
Freedom of operation of cap
follower and spring bolt action in cylinder rim night latches
BS 5872:1980
2526
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh S t ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
ASSA ABLOY
Issue No: 017 Issue date: 18 October 2013
Testing performed at main address only
Assessment Manager: PC2 Page 2 of 11
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
LOCKS and LATCHES for doors in buildings (cont’d)
Freedom of operation of knob or handle and spring bolt action in cylinder rim night latches
BS 5872:1980
Strength of bolt spring BS 5872:1980 Strength of follower, spring bolt and
stopping medium in rim and mortice locks and latches
BS 5872:1980
Strength of knob, cams, spring bolt
and stopping medium in rim night latches
BS 5872:1980
Strength of connecting bar in rim
cylinders BS 5872:1980
Dead bolt against end pressure BS 5872:1980 Operation of security mechanism BS 5872:1980 Strength of keys BS 5872:1980 Spring bolt through follower BS 5872:1980 Spring bolt through striking plate or
staple BS 5872:1980
Locking snib action on cylinder rim
night latches BS 5872:1980
Strength of lock or latch case,
forend and bolt BS 5872:1980
Strength of staple BS 5872:1980 Strength of striking plate BS 5872:1980
2526
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh S t ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
ASSA ABLOY
Issue No: 017 Issue date: 18 October 2013
Testing performed at main address only
Assessment Manager: PC2 Page 3 of 11
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
BUILDING HARDWARE - locks and latches - mechanically operated locks, latches and locking plates
Return force of latch bolt Resistance to side load on latch bolt Torque to operate deadbolt
BS EN 12209:2003 BS EN 12209:2003 BS EN 12209:2003
Strength of normal latch action and
stops BS EN 12209:2003
Torque resistance of rim lock with
lockable handle/knob BS EN 12209:2003
Durability of latch action without
force applied Durability of latch action with force applied
BS EN 12209:2003 BS EN 12209:2003
Durability of deadbolt mechanism BS EN 12209:2003 Durability of locking snib
mechanism BS EN 12209:2003
Closing force BS EN 12209:2003 Corrosion resistance BS EN 12209:2003 Operation at extremes of
temperature BS EN 12209:2003
Torque resistance of knob or lever
handle on bored lock and latch sets BS EN 12209:2003
Torque resistance of knob or lever
handle on rim night latch BS EN 12209:2003
Resistance to side load on deadbolt BS EN 12209:2003 Resistance to drilling and side load
on deadbolt BS EN 12209:2003
Deadbolt projection BS EN 12209:2003
2526
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh S t ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
ASSA ABLOY
Issue No: 017 Issue date: 18 October 2013
Testing performed at main address only
Assessment Manager: PC2 Page 4 of 11
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
BUILDING HARDWARE (cont’d) - locks and latches - mechanically operated locks, latches and locking plates
Resistance to end load Resistance to end load with drilling Resistance to pulling of hook/claw bolt
BS EN 12209:2003 BS EN 12209:2003 BS EN 12209:2003
Resistance to disengaging of
hook/claw bolt BS EN 12209:2003
Resistance to forcing of locating
device in sliding door locks BS EN 12209:2003
Resistance to pulling off of knob on
bored lock and latch set BS EN 12209:2003
Resistance to end load on box
protected locking plate BS EN 12209:2003
Resistance to side load on locking
plate BS EN 12209:2003
Resistance to pulling on locking
plate BS EN 12209:2003
Resistance to lifting force on locking
plate BS EN 12209:2003
Protection against removal from
door BS EN 12209:2003
Strength of key BS EN 12209:2003 Manual locking BS EN 12209:2003 Manual locking with intermediate
locking positions BS EN 12209:2003
Automatically locking deadbolt BS EN 12209:2003 Automatically locking latch bolt BS EN 12209:2003 Torque to withdraw the latch bolt
with key BS EN 12209:2003
2526
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh S t ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
ASSA ABLOY
Issue No: 017 Issue date: 18 October 2013
Testing performed at main address only
Assessment Manager: PC2 Page 5 of 11
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
BUILDING HARDWARE (cont’d) - locks and latches - mechanically operated locks, latches and locking plates
Torque to withdraw latch bolt with handle Strength of bolt actions
BS EN 12209:2003 BS EN 12209:2003
Minimum follower restoring torque BS EN 12209:2003 Non-interpassing of keys with just
one interval differ BS EN 12209:2003
THIEF RESISTANT LOCK ASSEMBLIES - key egress - keyless egress
Durability of deadbolt mechanism BS 3621:2007 BS 8621:2007 BS EN 12209:2003
Durability of latch action with force applied
BS 3621:2007 BS 8621:2007 BS EN 12209:2003
Resistance to end load BS 3621:2007
BS 8621:2007 BS EN 12209:2003
Resistance to end load with drilling BS 3621:2007
BS 8621:2007 BS EN 12209:2003
Strength of key BS 3621:2007
BS 8621:2007 BS EN 12209:2003
Manual locking BS 3621:2007
BS 8621:2007 BS EN 12209:2003
Manual locking with intermediate
locking positions BS 3621:2007 BS 8621:2007 BS EN 12209:2003
Automatically locking deadbolt BS 3621:2007
BS 8621:2007 BS EN 12209:2003
Automatically locking latch bolt BS 3621:2007
BS 8621:2007 BS EN 12209:2003
2526
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh S t ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
ASSA ABLOY
Issue No: 017 Issue date: 18 October 2013
Testing performed at main address only
Assessment Manager: PC2 Page 6 of 11
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
THIEF RESISTANT LOCK ASSEMBLIES (cont’d) - key egress - keyless egress
Torque to withdraw the latch bolt with key
BS 3621:2007 BS 8621:2007 BS EN 12209:2003
Torque to withdraw latch bolt with handle
BS 3621:2007 BS 8621:2007 BS EN 12209:2003
Strength of bolt actions BS 3621:2007
BS 8621:2007 BS EN 12209:2003
Minimum follower restoring torque BS 3621:2007
BS 8621:2007 BS EN 12209:2003
Key strength BS 3621:2007
BS 8621:2007 BS EN 1303:2005
Durability tests BS 3621:2007
BS 8621:2007 BS EN 1303:2005
Corrosion resistance and
temperature BS 3621:2007 BS 8621:2007 BS EN 1303:2005
Corrosion resistance (Test of
operation at extremes of temperatures)
BS 3621:2007 BS 8621:2007 BS EN 1303:2005
Operation of the security
mechanism BS 3621:2007 BS 8621:2007 BS EN 1303:2005
Torque resistance of plug and/or
cylinder BS 3621:2007 BS 8621:2007 BS EN 1303:2005
Resistance to drilling BS 3621:2007
BS 8621:2007 BS EN 1303:2005
Resistance to attack by chisel BS 3621:2007
BS 8621:2007 BS EN 1303:2005
2526
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh S t ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
ASSA ABLOY
Issue No: 017 Issue date: 18 October 2013
Testing performed at main address only
Assessment Manager: PC2 Page 7 of 11
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
THIEF RESISTANT LOCK ASSEMBLIES - key egress - keyless egress
Resistance to attack by twisting BS 3621:2007 BS 8621:2007 BS EN 1303:2005
Resistance to attack by plug/cylinder extraction
BS 3621:2007 BS 8621:2007 BS EN 1303:2005
Security hardware and cylinder test
- Part 1 - Part 2
BS 3621:2007 BS 8621:2007 PAS 24:2007
REPLACEMENT LOCK CYLINDERS and ASSOCIATED HARDWARE
Enhanced security performance DHF TS 007:2012
BUILDING HARDWARE - padlocks and padlock fittings
Operational unlocking Corrosion resistance
BS EN 12320:2001 BS EN 12320:2001
Non-interpassing of keys BS EN 12320:2001 Resistance to pulling or pushing of
cylinder plug or locking mechanism - simulated pull - actual pull
BS EN 12320:2001
Torque resistance of cylinder plug BS EN 12320:2001 Resistance to pulling of shackle and
staple BS EN 12320:2001
Resistance to twisting of shackle
and staple BS EN 12320:2001
Resistance to cutting of shackle and
staple BS EN 12320:2001
Shackle accessibility check BS EN 12320:2001 Staple accessibility check BS EN 12320:2001 Resistance to impact at low
temperature BS EN 12320:2001
Drill resistance BS EN 12320:2001 Sawing resistance BS EN 12320:2001
2526
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh S t ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
ASSA ABLOY
Issue No: 017 Issue date: 18 October 2013
Testing performed at main address only
Assessment Manager: PC2 Page 8 of 11
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
BUILDING HARDWARE (cont’d) - padlocks and padlock fittings
Tensile test for padlocks Documented In-House Method No LTM 002
BUILDING HARDWARE - single-axis hinges
Measurements BS EN 1935:2002
Load-deformation BS EN 1935:2002 Overload BS EN 1935:2002 Shear strength BS EN 1935:2002 Endurance BS EN 1935:2002 Corrosion resistance BS EN 1935:2002 Shear strength with hinge pin
removed BS EN 1935:2002 Annex C.4
BUILDING HARDWARE - lever handles
Check of spindle and fastening elements
BS EN 1906:2010
Axial strength of lock or latch
furniture and fastening elements BS EN 1906:2010
Free play and safety BS EN 1906:2010 Free angular movement or
misalignment BS EN 1906:2010
Torque of return mechanism BS EN 1906:2010 Durability of mechanism BS EN 1906:2010 Rotational strength BS EN 1906:2010 Corrosion resistance BS EN 1906:2010 BUILDING HARDWARE - emergency exit devices operated by a push pad
Temperature test Corrosion test
BS EN 179:2008 BS EN 179:2008
Corrosion resistance BS EN 179:1998 Release BS EN 179:2008
BS EN 179:1998
2526
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh S t ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
ASSA ABLOY
Issue No: 017 Issue date: 18 October 2013
Testing performed at main address only
Assessment Manager: PC2 Page 9 of 11
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
BUILDING HARDWARE (cont’d) - emergency exit devices operated by a push pad
Re-engaging BS EN 179:2008 BS EN 179:1998
Durability (excluding devices with additional deadbolt)
BS EN 179:2008 BS EN 179:1998
Abuse resistance
- operating element BS EN 179:2008 BS EN 179:1998
Abuse resistance
- vertical rods BS EN 179:2008 BS EN 179:1998
Security BS EN 179:2008
BS EN 179:1998 BUILDING HARDWARE - panic exit devices operated by a horizontal bar
Temperature test Corrosion test
BS EN 1125:2008 BS EN 1125:2008
Corrosion resistance BS EN 1125:1997 Release BS EN 1125:2008
BS EN 1125:1997 Re-engaging BS EN 1125:2008
BS EN 1125:1997 Durability (excluding devices with
additional deadbolt) BS EN 1125:2008 BS EN 1125:1997
Abuse resistance
- bar BS EN 1125:2008 BS EN 1125:1997
Abuse resistance
- vertical rods BS EN 1125:2008 BS EN 1125:1997
Security BS EN 1125:2008
BS EN 1125:1997 WINDOWS and DOORS Weathertightness BS 6375-1:2009 Air permeability BS 6375-1:2009
BS EN 1026:2000 Watertightness BS 6375-1:2009
BS EN 1027:2000
2526
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh S t ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
ASSA ABLOY
Issue No: 017 Issue date: 18 October 2013
Testing performed at main address only
Assessment Manager: PC2 Page 10 of 11
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
WINDOWS and DOORS (cont’d) Resistance to wind load BS 6375-1:2009
BS EN 12211:2000 DOOR ASSEMBLIES - external, single leaf
Weathertightness Operating forces Resistance to vertical loads Resistance to static torsion Slamming resistance Closure against obstruction Abusive forces on handles Door assembly resistance to soft and heavy body impact Door leaf resistance to hard body impact Cyclic operation test Basic security test
PAS 23-1:1999
EXTERNAL DOORSETS - single and double leaf - single swing - hinged - inward and outward opening - with or without integral side panels and fanlights
Manipulation test Infill medium removal - manual test Infill medium removal - mechanical test Manual cutting test Mechanical loading test Manual check test Soft body impact test Hard body impact test Security hardware and cylinder test - Part 1 - Part 2
PAS 24:2012
PRIVATE LETTER BOXES and LETTER PLATES
Letter plate fixings BS EN 13724:2002 Clause 6.6.5.1 PAS 24:2012
Letter plate flap BS EN 13724:2002 Clause 6.6.5.2
2526
Accredited to
ISO/IEC 17025:2005
Schedule of Accreditation issued by
United Kingdom Accreditation Service 21 - 47 H igh S t ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK
ASSA ABLOY
Issue No: 017 Issue date: 18 October 2013
Testing performed at main address only
Assessment Manager: PC2 Page 11 of 11
Materials/Products tested
Type of test/Properties
measured/Range of measurement
Standard specifications/
Equipment/Techniques used
WINDOWS: SINGULAR and MULTILIGHT - top hung (open out), side hung (open in and open out), bottom hung (open in), butt hinged - top and side hung (open out), projected - top hung fully reversible - tilt and turn and turn and tilt - vertical sliding - fixed and dummy vents - double opening (French windows)
Manipulation test Infill medium removal - manual test Infill medium removal - mechanical test Mechanical loading test Manual check test
PAS 24:2012
END
