Di2510/Di3010/Di3510Di2510f/Di3010f/Di3510f

User Manual[Additional Functions ]

Administrator Management ScreensAdministrator SettingsSetting Machine AccessRemoving Penalties

www.konicaminolta.net

A maximum of 999 copies can be specified at one time with this machine.

1.1 Administrator Management Screens 1

Di2510/Di2510f/Di30

1.1 Administrator Management ScreensTo display the Administrator Management screensThis explains the method for displaying the Administrator Management screens.

1 Press the [Utility] key.

2 Touch [Admin. Management].

3 Use the 10-Key P8-digit administraPassword), and [Enter].

NoteIf the adminiscorrectly enteIncorrect admTry again. apnied by a beelow the instruadministrator

If the Accesstor code is cothree incorrectrator code iscess to the Athe Administrand then typeKeep the adm10/Di3010f/Di3510/Di3510f 1-1

ad to type in the tor code (Admin.

then touch

trator code is in-red, the message

inistrator code. pears accompa-ping sound. Fol-ctions in the message that appears and type in the correct code.

Lock function is set to ON, incorrectly typing the administra-unted as an incorrect attempt to access the machine. After t attempts to access the machine, even if the correct adminis-

entered on a later attempt, an error message appears and ac-dministrator Management screen is denied. To allow access to ator Management screen, turn the machine off, then on again, in the correct administrator code.inistrator code in a safe place hidden from the general user.

1 1.1 Administrator Management Screens

1-2

4 Touch [Admin. 1] or [Admin. 2] to display the desired screen. For details on the

Administrator Management 2 screen, refer to page 1-5.

5 From the screen perform or the fu

NoteAfter accountDi3010/Di351one of followiPrinter ContrNetwork ScaIf Copy Trac[Account Reg

1.2 Administrator Settings 1

Di2510/Di2510f/Di30

1.2 Administrator SettingsChanging the administrator access codeThis explains the method to specify or change the administrator access code.

To set the administrator access code

1 Follow the procedure described in To display the Administrator Management screens on page 1-1 to display the Administrator Management screen.

2 Touch [Admin. 1

3 Touch [Administr

4 Touch [Current Cuse the 10-Key Pcurrently specifieadministrator codPassword). Press the [C]

entered text. To return to t

screen, touch10/Di3010f/Di3510/Di3510f 1-3

], and then touch [Admin. Set].

ator Code Input].

ode], and then ad to type in the d 8-digit e (Admin.

key to erase all

he previous [Cancel].

1 1.2 Administrator Settings

1-4

5 Touch [New Code], and then use the 10-Key Pad to type in the new 8-digit administrator code (Admin. Password). Press the [C] key to erase all

entered text. To return to the previous

screen, touch [Cancel].

6 Touch [Retype Nthen use the 10-Kthe new 8-digit a(Admin. Passwor Press the [C]

entered text. To return to t

screen, touch

7 Touch [Enter].

NoteIf an incorrecType in the cany of the folThe code entministrator coThe code entThe code enttered beside If the Accesstor code is cothree incorrectrator code isadministratorturn the machtor code.Di2510/Di2510f/Di3010/Di3010f/Di3510/Di3510f

ew Code], and ey Pad to retype

dministrator code d). key to erase all

he previous [Cancel].

t administrator code is entered, an error message appears. orrect administrator code. The error message may appear in lowing cases.ered beside Current Code does not match the registered ad-de.ered beside New Code is not an 8-digit number.ered beside Retype New Code does not match the code en-New Code. Lock function is set to ON, incorrectly typing the administra-unted as an incorrect attempt to access the machine. After t attempts to access the machine, even if the correct adminis-

entered on a later attempt, an error message appears and the code cannot be changed. To change the administrator code, ine off, then on again, and then type in the correct administra-

1.3 Setting Machine Access 1

Di2510/Di2510f/Di30

1.3 Setting Machine AccessAccess Lock

The Access Lock function is used to specify whether (On) or not (Off) access to Administrator mode, lock jobs and user boxes is monitored.If the Access Lock function is set to On, the number of incorrect attempts to ac-cess Administrator mode, lock jobs and user boxes is counted. After three incorrect attempts, access to the machine is denied. To allow Administrator mode to be ac-cessed again, turn thuser boxes to be accrefer to the Printer C

To make settings fo

1 Follow the procescreens on page

2 Touch [Admin. 2[Access Lock].

3 To use the Accetouch [ON]. To sAccess Lock fu[OFF].10/Di3010f/Di3510/Di3510f 1-5

e machine off, then on again. However, to allow lock jobs and essed again, the penalty must be removed. For more details, ontroller User Manual.

r the Access Lock function

dure described in To display the Administrator Management 1-1 to display the Administrator Management screen.

], and then touch

ss Lock function, top using the nction, touch

1 1.3 Setting Machine Access

1-6

4 Touch [Enter]. To return to the previous screen, touch [Cancel].

5 Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to return to the Basics screen.Di2510/Di2510f/Di3010/Di3010f/Di3510/Di3510f

1.4 Removing Penalties 1

Di2510/Di2510f/Di30

1.4 Removing PenaltiesUnlockIf the Access Lock function is set to ON and the optional printer controller is in-stalled, the penalty must be removed in order to allow access after incorrect at-tempts to access lock jobs and user boxes. For more details, refer to the User Manual for the printer controller.In addition, to allow access after incorrect attempts to access Administrator mode, turn the machine off10/Di3010f/Di3510/Di3510f 1-7

, then on again.

1 1.4 Removing Penalties

1-8 Di2510/Di2510f/Di3010/Di3010f/Di3510/Di3510f

2004. 3 4031-7783-02

Copyright2003

KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.Printed in Japan

KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.Marunouchi Center Building, 1-6-1 Marunouchi, Chiyoda-ku, Tokyo, 100-0005, Japan

The information contained in this manual is subject to change without notice toincorporate improvements made on the product or products the manual covers.

For the preservation of forests, this manual was made using bagasse (sugar cane fibers used in the production of wood-free paper).

For the protection of the global environment and human welfare, thismanual was printed using soy ink.