25 x 25 mm Ø 16 mm

76

Front dimensions: 25 x 25 mm (24 x 24 mm for mosaic on request)

Panel cut-out: Ø 16 mmFront bezel height: 12 mmTravel: 6 mm

77

>> 01

>> 08

>> 07

>> 06

>> 05

>> 03

>> 02

>> 04

>> 09

IP65

6 mm

78 Georg Schlegel GmbH & Co. KG - 88525 Dürmentingen - +49 (0) 73 71 / 502-0 - Fax: +49 (0) 73 71 / 502 49 - [email protected] - www.schlegel.biz

Overview / Housing Colours / Symbol Definition - QUARTRON series

01 Pushbutton Heads page 8202 Emergency Stop Buttons page 8503 Mushroom Heads page 8504 Knob Set for Rotary Switch / Potentiometer page 8605 Selector Heads page 8706 Toggle Heads page 87

07 Key Actuators page 8808 Acoustic Buzzers page 9209 Pilot Lights page 93

Contact Blocks / Lampholders page 414

degree of protection illuminating option

operating travel labelling option

AAZ

CT

CTP

CTF

PTP

PTF

ASI

79Georg Schlegel GmbH & Co. KG - 88525 Dürmentingen - +49 (0) 73 71 / 502-0 - Fax: +49 (0) 73 71 / 502 49 - [email protected] - www.schlegel.biz

AT.../AF.../AZ...Contact BlocksFaston terminalspage 416

CT...Contact BlocksFaston terminalspage 510

CTP...Contact BlocksPCB-mount terminalspage 486

CTF...Contact BlocksFaston terminalspage 494

PTP...Contact BlocksPCB-mount terminalspage 518

PTF...Contact BlocksFaston terminalspage 518

ASI...Contact Blocks for AS-InterfaceSafety @ Workpage 564

31,8

31,3 37 31,3

48,2

54

67,5

PTP... PTF... CTP... CT.../CTF... CZ... A... ASI_SAW...

+10,

5

CAP...CAFP...

XAP...

+10,

5

CT CTF CZ ASIPTP PTF CTP A AZ


Mounting Depth Dimensions

Cutout Dimensions

Min. mounting grid 25 x 38 mm when using external nameplate holders


Mounting and Service Instructions

suitable contact blocks



IP65

6 mm

IP67

6 mm

IP67

IP67

3mm

IP65

6 mm

Pushbutton Heads (momentary/push-push)*) 24 x 24 mm on request,lenses and nameplates to be ordered separately

Illustration Dimensions Description Type


QUARTRONØ 16 mm

Pushbutton Head*

A AZ CT CTF CTP CZ

front bezel black QXT charcoal QXTDG

Pushbutton Head*with transparent silicone cap

A AZ CT CTF CTP CZ

front bezel black QXP

Sealing Cap TK25Smade of silicone rubber, down to -50°C

Short-stroke Membrane Pushbutton Head - with transparent silicone cap, down to -50° C- with transparent, flat lens, add code letter to type number, e.g. QXDMRT (red-RT, green-GN, yellow-GB, blue-BL, clear-KL)- with illuminating option, blank nameplate included. Standard or special imprints on request.

ASI B BT BZ BZ B CT CTF CTP CZ

front bezel black QXDM... charcoal QXDMDG...

Pushbutton 1 NOwith 2 Faston terminals 2.8x0.8 mm, 250 V, 6(4) A, AC,with labelling option(plug sockets for PCB‘s, type YAP...)

front bezel black QXTI

IP65

3mm

IP65

6 mm

IP65

3mm

Pushbutton Heads (momentary/push-push)Lenses and nameplates to be ordered separately



QUARTRONØ 16 mm

Short-stroke Pushbutton 1 NOwith 2 Faston terminals 2.8x0.8 mm,250 V, 6(4) A, AC(plug sockets for PCBs, type YAP...)

front bezel black QXDI

Height Compensation Spacer for QXDI and QXTI YAP21

Pushbutton 1 NCwith 2 Faston terminals 2.8x0.8 mm, 250 V, 6(4) A, AC,(plug sockets for PCB‘s, type YAP...)

front bezel black QXTO

Short-stroke Pushbutton 1 NC with 2 Faston terminals 2.8x0.8 mm,250 V, 6(4) A, AC(plug sockets for PCBs, type YAP...)

front bezel black QXDO

Height Compensation Spacer for QXDO and QXTO YAP20

Accessories for Actuators



QUARTRON

Concave Lens, transparentcolour blue T25DBL yellow T25DGB green T25DGN clear T25DKL red T25DRT opalwhite T25DWS

Flat Lens, transparentcolour blue T25FBL yellow T25FGB green T25FGN clear T25FKL red T25FRT opalwhite T25FWS

Flat Lens, non-transparentcolour blue T25FGBL yellow T25FGGB green T25FGGNcolour black T25FGSW red T25FGRT white T25FGWS

High Lens, transparentcolour blue T25HBL yellow T25HGB green T25HGN clear T25HKL red T25HRT

Nameplate BSQX...with standard imprint, please specify index number (see nameplates on pages 410)

Nameplate BSQXBwith special imprint according to customer‘s specifications

Ø 22 mm



IP65

6 mm

IP65

6 mm

Emergency Stop ButtonsMushroom Heads*) 24 x 24 mm on request



QUARTRON

Blank Nameplate BSQXU

For further emergency stops, please refer to the chapter „Emergency-stop Heads“ starting on page 362The emergency-stop heads can also be supplied as latching mushroom heads with mushrooms in different colours.

Ø 16 mm

Mushroom Head, latch-type*latching in depressed position, key reset,with keyhole coverswitching position indicator Noanti-lock collar Norelease key release

A AZ PTP

mushroom head redfront bezel black QXVSCH charcoal QXVSCHDG

Mushroom Head, momentary*other mushroom colours on requestswitching position indicator Noanti-lock collar No

A AZ CT CTF CTP CZ

front bezel black QXS charcoal QXSDG

PTF

IP65

IP65

IP65

Knob Set for rotary switches*) 24 x 24 mm on requestKnob Set for potentiometers



QUARTRONØ 16 mm

Knob Set for rotary switches, without inscription*

front bezel black QXDAU charcoal QXDAUDG

Knob Set for rotary switches, with inscription*different versions on requestfront bezel black QXDAB... charcoal QXDABDG...

Knob Set for potentiometers*for potentiometers of 6 mm shaft dia. and thread M10x0.75.Delivery without potentiometer.Shaft length: approx. 50 mm ± 4 mmfront bezel black QXR charcoal QXRDG

different versions on request







IP65

IP65

IP65

IP65

Selector Heads (momentary/maintained)*) 24 x 24 mm on request

I = Switching position> = Spring return

Toggle Heads



QUARTRONØ 16 mm

Selector Head*, maintained

A AZ CT CTF CTP CZ

front bezel black QXWA charcoal QXWADG

A AZ

front bezel black QXWB charcoal QXWBDG

Selector Head, momentary*

A AZ CT CTF CTP CZ

front bezel black QXSTA charcoal QXSTADG

A AZ

front bezel black QXSTB charcoal QXSTBDG

Selector Head*, left maintained, right momentary

A AZ

front bezel black QXWC charcoal QXWCDG

Toggle Headother toggle colours on request

A AZ CT CTF CTP CZ

front bezel black QXK charcoal QXKDG









IP65

IP65

Key Actuators (momentary/maintained)*) 24 x 24 mm on request

I = Switching postition> = Spring returnO = Key removable position



QUARTRONØ 16 mm

Key Actuator*including two keysother lock types on request

A AZ

front bezel black QXSSA12E charcoal QXSSDGA12E

A AZ


A AZ CT CTF CTP CZ


A AZ CT CTF CTP CZ


A AZ CT CTF CTP CZ


A AZ CT CTF CTP CZ


Key Actuator, momentary*

A AZ


A AZ CT CTF CTP CZ


including two keysother lock types on request




IP65

IP65





QUARTRONØ 16 mm

Key Actuator, left maintained, right momentary*

A AZ


A AZ


Lockable Pushbutton Head*including two keys

Type N: Depresses with or without key. Lock latches in depressed position and resets with key turned clockwise. Key removable in both positions.

Type 1: Depresses only with key turned clockwise. Turn key into vertical position, the lock latches. Reset by turning key clockwise. Key removable in both vertical positions.

Type 2:Depresses only with key in the right position (= basic position). Turn key into vertical position, the lock latches. Key only removable in the latching position. Reset by turning key clockwise.

Type 3:Depresses only with key turned clockwise. The lock does NOT latch in depressed position (key neither turnable nor removable in depressed position; MOMENTARY). Key only removable in the off-position.

A AZ CT CTF CTP CZ

front bezel black QXSCHA...front bezel charcoal QXSCHDGA...

including two keysother lock types on request











IP65IP65IP65

IP65P65P65

IP65P65P65





QUARTRONØ 16 mm

Key Actuator with protection cap, maintained*including two keys,other lock types on request

A AZ

front bezel black QXSSKA12E

A AZ


A AZ CT CTF CTP CZ


A AZ CT CTF CTP CZ


A AZ CT CTF CTP CZ


A AZ CT CTF CTP CZ


Key Actuator with protection cap, momentary*including two keys,other lock types on request

A AZ


A AZ CT CTF CTP CZ


Key Actuator with protection cap, left maintained, right momentary*

A AZ


A AZ


including two keys,other lock types on request




QUARTRON

Spare Keys ES3A36standard spare key, specify key number for special locks

Spare Key (standard) ESE845standard spare key, specify key number for special locks

Ø 16 mm

IP65

IP65

IP65

IP65

Buzzers



QUARTRONØ 16 mm

Buzzeroperating voltage: 12 ... 24V AC/DCoperating current: max. 30mAsignal frequency: 3.5 +/- 0.5 Hzvolume: max. 85 db (10cm, 24V) max. 80 db (10cm, 12V)operating temperature: -20°C ... 60°Cfront bezel black QXNSG+SG-24V

Interval Buzzeroperating voltage: 12 ... 24V AC/DCoperating current: max. 30mAsignal frequency: 3.5 +/- 0.5 Hzvolume: max. 85 db (10cm, 24V) max. 80 db (10cm, 12V)interval: 1 soperating temperature: -20°C ... 60°Cfront bezel black QXNSG+SGI-

24V

Illuminated Buzzeroperating voltage: 12 ... 24V AC/DCoperating current: max. 30mAsignal frequency: 3.5 +/- 0.5 Hzvolume: max. 85 db (10cm, 24V) max. 80 db (10cm, 12V)operating temperature: -20°C ... 60°Cfront bezel black QXNSGL+SGLR-

24V

Illuminated Interval Buzzeroperating voltage: 12 ... 24V AC/DCoperating current: max. 30mAsignal frequency: 3.5 +/- 0.5 Hzvolume: max. 85 db (10cm, 24V) max. 80 db (10cm, 12V)interval: 1 soperating temperature: -20°C ... 60°Cfront bezel black QXNSGL+SGILR-

24V

Faston Clamp 2.8 x 0.8 mm with snap-in pin

FH2,8

Cross section 0.75 - 1.50 mm², brass, with pin to snapfit into the socket XA, XAL and the insulating case IH2.8

suitable lampholders

IP65

IP65

Pilot Light Heads/Pilot Lights*) 24 x 24 mm on request,lenses and nameplates to be ordered separately



QUARTRON

Insulating Case IH2,8for Faston clamp FH2,8, slip on from the front

Double Faston FD2,8for the connection of 2 Faston clamps FH2.8

Ø 16 mm

Pilot Light with Faston terminals 2.8x0.8 mm*front bezel black QXL5 charcoal QXL5DG

Pilot Light Head*

A CT CTF CTP CZ

front bezel black QXN charcoal QXNDG

Flat Lens, depolishedcolour blue KF25BL yellow KF25GB green KF25GN red KF25RT opalwhite KF25WS

Flat Lens, transparentcolour blue KF25KSBL yellow KF25KSGB green KF25KSGN clear KF25KSKL red KF25KSRT

IP65

Pilot Light Heads/Pilot LightsLenses and nameplates to be ordered separately



QUARTRON

Nameplate BSQX...with standard imprint, please specify index number (see nameplates on pages 410)

Lampholder L5

Nameplate BSQXBwith special imprint according to customer‘s specifications

Blank Nameplate BSQXU

Ø 16 mm

Panoramic Pilot Light with Faston terminals 6.3/2.8x0.8 mm

QXL9

BA9s socketmax. 250V 2W

Panoramic Lenscolour blue KH25BL yellow KH25GB green KH25GN clear KH25KL red KH25RT opalwhite KH25WS

IP65

Seven-segment Displays



QUARTRONØ 16 mm

4-Digit 7-Segment Display with serial interfaceOperating temperature : -30 bis +70°COperating voltage: 24V DC (18-28V)Current consumption: 70mA at 24VInputs (Enable, Clock, Data): 24V PLC levelClock pulse rate: 0...10kHzData telegram: 20 bit, serialAvailable character set: 0...9, A, I, II, U, -, blankConnection: via integrated 6-pole diode plug acc. to DIN 45322

Option: parallel control (8 bit) via additional modulefront bezel black LXLASCE-SPS

DIN Female Connector MAK6serves to connect the 7-segment displays in compliance with DIN 45322




QUARTRON

Hexagonal Mounting Tool S16with torque limitation,for the series OKTRON, OKTRON-JUWEL, OKTRON-R, RONTRON-R-JUWEL, RONTRON-R-Exclusive, RONTRON-Q-JUWEL, RONTRON-Q-Exclusive, QUARTRON(-L), QUARTRON-JUWEL(-L), RX, RX-JUWEL

Mounting Tool Adapter with 1/4“ connections

SRA

for mounting tools S16 and S22

Ø 16 mm

Threaded Adapter R16X1Allows true-to-size mounting of actuators for 16 mm mounting dia. into 22.5 mm holes.Includes also a suitable sealing.

External Nameplate Holder for outside marking of the actuators of the QUARTRON and OKTRON series, accepts self-adhesive nameplatescolour charcoal QXABT

Self-adhesive Nameplate - laser-printed BZ16G

Inscription according to customer‘s specificationDimensions: 22 x 11 mm

Self-adhesive Nameplate - blank BZ16UDimensions: 22 x 11 mm

Self-adhesive Nameplate BZ16B...with standard inscription, please specify index no. (see nameplates)Dimensions: 22 x 11 mm

IP65




QUARTRONØ 16 mm

Yellow Nameplateself-adhesive PVC foilprinting on requestouter dia. 60 mmfor mounting dia. 16 mmcolour yellow NAS_16

Yellow Nameplate with quadrilingual imprintself-adhesive PVC foilouter dia. 60 mmfor mounting dia. 16 mmcolour yellow NAS_16_548

Protective Shroudfor actuators of 16 mm mounting dia. colour yellow QXSK charcoal QXSKDG

Lead-sealable Protective Lid KDQ16fits onto the pushbuttons of the QUARTRON series

Height Compensation Spacer for KDQ16 KDAU16for height compensation on PCB assembly

Lamp Remover LZ-MG

Universal Lens Remover USK

Square Dummyto close unused mounting aperturescolour black Q16

Documents

25 x 25 mm Ø 16 mm