Upload
window-hardware
View
215
Download
0
Embed Size (px)
Citation preview
8/9/2019 25 series TrimLine POLE-OPERATED CAM HANDLE LOCKS
1/4
25 POLE-OPERATEDCAM HANDLE LOCKS
Truth Cam Handle Locks are designedto provide long and trouble-freeservice. The hole in the handle allowsoperation of cam lock in elevatedlocations. Two-piece strike design
includes a black polyester insert toprovide a smooth operation and reducewear. Inserts are available in variousheights to assure tight lock-up ofwindow. The 90 rotation of the handlelocks or unlocks the sash. This productcan exceed 300 lbs. of forced entryresistance per locking point.
Truth offers two different ways inwhich this product can be mounted tothe window sash - Face Mounted (In-line or Offset options), or for concealedmounting applications, an Angle Basefeature is available. Consult thedrawings for further details.
WARRANTY:
Protected under the terms of the TruthWarranty for Window and DoorManufacturers and AuthorizedDistributors. Refer to Truths Termsand Conditions for further details.
MATERIAL: High-pressure die-castzinc handle, base and strike housing.Strike housing materials and finishesmatch cam handles. Inserts are blackpolyester. #30569 Strike made of
painted steel.
FINISH: Electrostatically applied,durable coatings that provide excellentresistance to chipping, scratching andcorrosion while maintaining colorstability for years in direct sunlight.Please refer to Truth's Color Chart forexamples of Truth's most popular finishoptions. Truth also offers a wide rangeof decorative "plated" finishes - contactTruth for additional information onavailability of these finishes on specificproduct lines.
AWNING
TRUTH TIPS:
1. For accurate hardware placement invinyl or metal applications, pre-drilling
of the window profile is recommended.
2. For vinyl window applications,mounting screws should pass throughtwo PVC walls, or one PVC wall andone insert wall. For this reason, it maybe necessary to use a longer screw thanis recommended.
3. For metal window profiles, Truthrecommends machine screws.However, in most applications, sheetmetal screws will provide adequateholding power.
INCLUDE TRUTH SPECS ON
YOUR NEXT WINDOW PROJECT
Cam handle locks shall be includedwhich will increase both security andweather seal tightness. The locks musthold securely up to 300 lbs. of forceper lock for negative air pressure andforced entry resistance. A hole shall beprovided in the handle for poleoperation in out-of-reach applications.
Window locks shall be of cam handledesign and utilize a two-piece strike.The cam handle must be constructed of
high pressure zinc alloy die castings.Marring of window surfaces will beeliminated by using a plastic insertmounted in a high pressure zinc diecast strike housing.
Window locks shall be 25 series PoleOperated, as manufactured by TruthHardware, Owatonna, MN.
ORDERING INFORMATION &
OPTIONS:
1. Choose cam handle mounting
desired by part number (see drawingsfor various options).
2. Specify finish number desired.
3. Specify left- or right-hand(determined by which direction thehandle points in the locked position,when viewed from the inside, on aproject out bottom window).
4. Select mounting hardware (soldseparately):
a. Choose strike and insert part
numbers. Make sure strike coincideswith handle (offset or in-line). NOTE:#25.70 and #25.72 can be used with a#30569 strike plate allowing use ofeither left- or right-hand cam handleswith the same strike placement.
b. Optional (1)#20408 Rubber-cork adhesivebacked gasket for In-line bases.(1)#20556 Rubber-cork adhesivebacked cam handle gasket for Offsetbases.
RECOMMENDED SCREWS:
Types of screws required determinedby material of profile used. Refer todrawings for complete information onscrew type and quantity needed (soldseparately). For additional informationregarding screw selection - see TruthTips and refer to Tech Note #11.
8/9/2019 25 series TrimLine POLE-OPERATED CAM HANDLE LOCKS
2/4
25 POLE-OPERATEDCAM HANDLE LOCKS
a
FIG. 3 CAM HANDLE 25.72 (in-line base)
FIG. 1 APPLICATION OF IN-LINE AND ANGLE BASE POLE OPERATED CAM HANDLES
SASH
FRAME
SASH
HARDWARE SHOWN
25.72 CAM HANDLE
20236 STRIKE HOUSING
20233 INSERT
RIGHT HAND SHOWN
FRAME
RECOMMENDED SCREWS:
METAL: 2 (P/N 19630) #10-24 X .312 PHILLIPS, FLAT HEAD, SST METAL MACHINE SCREWS
PVC/WOOD: 2 - #10-24 PHILLIPS, FLAT HEAD, SST SCREWS (LENGTH AND THREAD TYPE DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
METAL: 2 (P/N 19630) #10-24 X .312 PHILLIPS, FLAT HEAD, SST METAL MACHINE SCREWS
PVC/WOOD: 2 - #10-24 PHILLIPS, FLAT HEAD, SST SCREWS (LENGTH AND THREAD TYPE DETERMINED BY PROFILE)
RIGHT HAND SHOWN
HARDWARE SHOWN25.74 CAM HANDLE
20236 STRIKE HOUSING
20233 INSERT
STRIKE HOUSING AND INSERTSEE FIG. 6 AND 7
.344(8.7mm)
.875(22.2mm)
1.500(38.1mm)
1.125(28.6mm)
3.438(87.3mm)
.750(19.1mm)
3.438(87.3mm)
.750(19.1mm)1.500
(38.1mm)
.250(6.4mm)
1.125(28.6mm)
.344(8.7mm)
.875(22.2mm)
FIG. 2 CAM HANDLE 25.70 (offset base)
8/9/2019 25 series TrimLine POLE-OPERATED CAM HANDLE LOCKS
3/4
25 POLE-OPERATEDCAM HANDLE LOCKS
FIG. 4 CAM HANDLE 25.74 (A-1 angle base)
FIG. 5 CAM HANDLE 25.41 (A-3 angle base)
3.438(87.3mm)
1.375(34.9mm)
1.938(49.2mm)
1.750(44.5mm)
.438(11.1mm)
.438(11.1mm)
.938(23.8mm)
1.375(34.9mm)
.984(25.0mm)
3.438(87.3mm)
.875(22.2mm)
.656(16.7mm)
.188(4.8mm)
.140(3.6mm)
1.0(25.4mm)
.938(23.8mm)
.344(8.7mm)
.188(4.8mm)
.188(4.8mm)
.844(21.4mm)
1.125(28.6mm)
1.125(28.6mm)
.344(8.7mm)
.188(4.8mm)
.140(3.6mm).344
(8.7mm)
.718(18.3mm)
.656(16.7mm)
RECOMMENDED SCREWS:
METAL: 2 (P/N 19640) #10-24 X .375 PHILLIPS, PANHEAD, SST METAL MACHINE SCREWS
PVC/WOOD: 2 - #10-24 PHILLIPS, PAN HEAD, SSTMETAL MACHINE SCREWS (LENGTH ANDTHREAD TYPE DETERMINED BY PROFILE)
RECOMMENDED SCREWS:
METAL: 2 (P/N 19640) #10-24 X .375 PHILLIPS, PANHEAD, SST METAL MACHINE SCREWS
PVC/WOOD: 2 - #10-24 PHILLIPS, PAN HEAD, SSTMETAL MACHINE SCREWS (LENGTH ANDTHREAD TYPE DETERMINED BY PROFILE)
RIGHT HAND SHOWN
RIGHT HAND SHOWN
8/9/2019 25 series TrimLine POLE-OPERATED CAM HANDLE LOCKS
4/4
24 POLE-OPERATEDCAM HANDLE LOCKS
c
FIG. 6 IN-LINE STRIKE HOUSING 20236
FIG. 8 STRIKE PLATE 30569
FIG. 7 OFFSET STRIKE HOUSING 20237
FIG. 9 GASKET 20556 (offset base) FIG. 10 GASKET 20408(in-line base)
SASH
FRAME
FRAME
.032(.8mm)
.032(.8mm)
1.438(36.5mm) 1.438
(36.5mm)
.375(9.5mm)
1.468(37.3mm)
2.938(74.6mm)
.500(12.7mm)
.625(15.9mm)
RECOMMENDED SCREWS:
WOOD/PVC/METAL: 2 - #7 PHILLIPS, FLAT HEAD, STEELSCREWS (LENGTH AND THREAD TYPEDETERMINED BY PROFILE)
.750(19.1mm)
.438
(11.1mm)
1.500(38.1mm)
2.062(52.4mm)
2.062(52.4mm)
1.500(38.1mm)
A
.625(15.9mm)
A
RECOMMENDED SCREWS:
METAL: 2 (P/N 19630) #10-24 X .312 PHILLIPS, FLATHEAD, SST METAL MACHINE SCREWS
PVC/WOOD: 2 - #10-24 PHILLIPS, FLAT HEAD, SSTSCREWS (LENGTH AND THREAD TYPEDETERMINED BY PROFILE)
RECOMMENDED SCREWS:
METAL: 2 (P/N 19630) #10-24 X .312 PHILLIPS, FLATHEAD, SST METAL MACHINE SCREWS
PVC/WOOD: 2 - #10-24 PHILLIPS, FLAT HEAD, SSTSCREWS (LENGTH AND THREAD TYPEDETERMINED BY PROFILE)
.282 (7.1mm)
OFFSET STRIKE HOUSINGIN-LINE STRIKE HOUSING
.344 (8.7mm)
A
20236
.218 (5.6mm)
STRIKEHOUSINGNUMBER
20237
.344 (8.7mm)
.282 (7.1mm)
A
.218 (5.6mm)
INSERTNUMBER
INSERTNUMBER
STRIKEHOUSINGNUMBER
20231
20232
20233
20231
20232
20233
INSERTINSERTSTRIKEHOUSING
STRIKEHOUSING
700 WEST BRIDGE STREET, OWATONNA, MN 55060 I 507.451.5620 800.866.7884 I TRUTH.COM