24 square / 30 square / 40 square series FEATURES · (XL20-CV) Panel surface (Square washer screw) Terminal cover Applicable accessories Panel cut dimensions XL20-LED - XL20-LENS-XL20-CV

1

2

3

4

6

7

5

8

9

10

300

（cd/m 2 ）

200

100

0 20

40 60 80 100 120 140 160 180 200 220 （V ） XL3600(30×60)

XL4800(40×80)

XL3010(30×30)

XL4010(40×40)

XL2000(24×24)

XL3000(30×30)

XL4000(4001)(40×40)

24V, 48V, 100/110V, 125V AC/DC

8mA

（XL3000 type）（DL303M type）

Oblique window

250V

24V, 48V, 100 / 110V, 125V AC / DC, 200 / 220V AC

24 square / 30 square / 40 square series

●LED TYPE

MULTI-WINDOW INDICATOR

XL TYPE

Specification

Type (window size)

Rated insulation voltage (Ui)

Rated operational voltage (Ith)

Rated current(per LED unit)

Voltage fluctuation range

Operating temperature

Storage temperature

Relative humidity

Altitude

Panel thickness

Insulation resistance

Power-frequency withstand voltage

Impulse withstand voltage

Terminal strengt

Recognition distance

Degree of protection

Vibration resistance

Shock resistance

Weight (per window)

Others

Within ±15%

‒25 to 65℃45% to 85%

2,000 m max.

Thickness: 1 to 6mm

1,000MΩ or more (Whole live part to mounting panel)

2,000V AC / 1 min. (Whole live part to mounting panel)

±7kV / 3 times for each pole (1.2 / 50µs) (Whole live part to mounting panel)

Tensile: 50N (1min.) in 2 directions; tightening: 0.8N·m (10 to 15 sec.)

Mounting surface luminance: 1,000 Lx; visible distance: 10m

IP40 (Panel front portion)

10 to 55Hz; double amplitude: 1.5mm, 1 hour in each of 3 axial directions

500 m/s2 ; 3 times in each of 6 directions

With the function of error illumination prevention

Approx. 30g Approx. 50g Approx. 60g Approx. 100g Approx. 120g Approx. 50g

With one-point illumination

Approx. 60g

9mA (18mA for 24V only)For green and blue LED unit, 7mA

‒20 to 50℃‒20 to 40℃



FEATURES

The 4-element LED (Aℓ InGAP-LED) has been adopted to achieve higher brightness.(Four times (max.) brighter than our previous models) The front access method simplifies

the procedure for changing power supply voltage. We can accept orders for a single unit and handle short delivery periods.

●XL Type Input Voltage – Brightness Characteristics

The short body with a reduced panel back dimension meets the requirement for smaller-size indicators.

The XL type provides an illumination voltage limiter circuit as a standard feature to prevent the LED from erroneously lighting due to induced voltage.

With the new lens structure, you can easily insert a name label. To improve ease of use, print film applicable to laser printers is also available.(Aavailable accessory)

Voltage

24V type (Unlit under voltages up to approx. 8V)



Brig

htne

ss

The energy-saving design can reduce power consumption by approx. 30% (as compared with previous models). Rated operating current (at 110 V AC)XL type: approx. 11 mA DL type: approx. 18 mA

XL3010 and XL4010 are equipped with the bullet LED for one-point illumination, allowing easy recognition even in outdoor use. The one-point illumination lights up the LED of each color.

To enhance safety, the XL type provides the terminal cover for the wiring screw live parts as a standard equipment. As the terminal cover is a joint type, you can mount and dismount the cover without dropping and losing it.

The XL type can use both AC and DC power supplies (AC/DC power supply type).

The 220 V type is exclusive to AC power supply.

The XL type uses chip modules, ensuring high performance, high reliability and low cost.

SPECIFICATIONS (RATINGS, PERFORMANCE)

With the XL2000 type, the terminal cover is to be mounted for each window.

B19

1

2

3

4

6

7

5

8

9

10

300

（cd/m 2 ）

200

100

0 20

40 60 80 100 120 140 160 180 200 220 （V ） XL3600(30×60)

XL4800(40×80)

XL3010(30×30)

XL4010(40×40)

XL2000(24×24)

XL3000(30×30)

XL4000(4001)(40×40)

24V, 48V, 100/110V, 125V AC/DC

8mA

（XL3000 type）（DL303M type）

Oblique window

250V

24V, 48V, 100 / 110V, 125V AC / DC, 200 / 220V AC

24 square / 30 square / 40 square series

●LED TYPE


XL TYPE

Specification

Type (window size)


Rated operational voltage (Ith)

Rated current(per LED unit)

Voltage fluctuation range


Storage temperature

Relative humidity

Altitude

Panel thickness


Power-frequency withstand voltage

Impulse withstand voltage

Terminal strengt

Recognition distance


Vibration resistance

Shock resistance

Weight (per window)

Others

Within ±15%

‒25 to 65℃45% to 85%

2,000 m max.

Thickness: 1 to 6mm

1,000MΩ or more (Whole live part to mounting panel)

2,000V AC / 1 min. (Whole live part to mounting panel)

±7kV / 3 times for each pole (1.2 / 50µs) (Whole live part to mounting panel)

Tensile: 50N (1min.) in 2 directions; tightening: 0.8N·m (10 to 15 sec.)

Mounting surface luminance: 1,000 Lx; visible distance: 10m

IP40 (Panel front portion)

10 to 55Hz; double amplitude: 1.5mm, 1 hour in each of 3 axial directions

500 m/s2 ; 3 times in each of 6 directions

With the function of error illumination prevention

Approx. 30g Approx. 50g Approx. 60g Approx. 100g Approx. 120g Approx. 50g


Approx. 60g


‒20 to 50℃‒20 to 40℃



FEATURES

The 4-element LED (Aℓ InGAP-LED) has been adopted to achieve higher brightness.(Four times (max.) brighter than our previous models) The front access method simplifies

the procedure for changing power supply voltage. We can accept orders for a single unit and handle short delivery periods.

●XL Type Input Voltage – Brightness Characteristics

The short body with a reduced panel back dimension meets the requirement for smaller-size indicators.

The XL type provides an illumination voltage limiter circuit as a standard feature to prevent the LED from erroneously lighting due to induced voltage.

With the new lens structure, you can easily insert a name label. To improve ease of use, print film applicable to laser printers is also available.(Aavailable accessory)

Voltage




Brig

htne

ss

The energy-saving design can reduce power consumption by approx. 30% (as compared with previous models). Rated operating current (at 110 V AC)XL type: approx. 11 mA DL type: approx. 18 mA

XL3010 and XL4010 are equipped with the bullet LED for one-point illumination, allowing easy recognition even in outdoor use. The one-point illumination lights up the LED of each color.

To enhance safety, the XL type provides the terminal cover for the wiring screw live parts as a standard equipment. As the terminal cover is a joint type, you can mount and dismount the cover without dropping and losing it.

The XL type can use both AC and DC power supplies (AC/DC power supply type).

The 220 V type is exclusive to AC power supply.

The XL type uses chip modules, ensuring high performance, high reliability and low cost.


With the XL2000 type, the terminal cover is to be mounted for each window.

B20

A S

WIT

CH

B P

ILO

T L

AM

P &

IN

DIC

ATO

RD

ELE

CTR

ON

IC

DEV

ICES

C C

ON

NEC

TIN

G

DEV

ICES

E CO

NTR

OL

C

ENTE

R P

AR

TS

PILOT LAMP & INDICATOR

XL3000

３０× n ＋５

３０× m ＋５

３０３０× n ６

３０× m

３０× m＋１２

６

３０× n ＋１２

３０

３０

３０

６.５７０

M３ .５ ×８

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

１０

１４

XL2000

24 × n ＋５

24 × m ＋５

6

24

24

24 ×m

24 24 6

24 × m＋

12

24 ×n 24 × n＋12

M3.5 ×8

62 58.5

6.5

X2

X1

9.5


XL TYPE●LED TYPE

STANDARD PRODUCTSHOW TO ORDER

Fitting(XL-TK)

Mounting panel (t=1 to 6mm)

(XL20-CV)

Panel surface

(Square washer screw)

Terminal cover

●Applicable accessories

●Panel cut dimensions

XL20-LED -

XL20-LENS-

XL20-CV

XL-TK

XL-SB5

XL-NQ (Sold separately)

XL-NP (Sold separately)

XL20-FM (Sold separately)

m: No. of rows, n: No. of columns

LED unit

Lens

Terminal cover

Fitting

Jumper

Removing tool

Voltage label

Film

Panel surface


Fitting(XL-TK)

Terminal cover(XL-CV)


●Applicable accessoriesLED unit

Lens

Terminal cover

Fitting

Jumper

Removing tool

Voltage label

Film


XL30-LED -

XL30-LENS-

XL-CV

XL-TK

DL-SB1





（30×30）

（24×24）

XL2000XL30 Series

Type Maximum number of lamps27 rows and 27 columns20 rows and 20 columns

XL36 Series 20 rows and 10 columnsXL40 SeriesXL48 Series

15 rows and 15 columns15 rows and 7 columns

*1 Please indicate the display color array as the upper left reference from the front view.*2 When mixed voltages are mixed, please display in order of display color, quantity, voltage.*3 It is also possible to use white (W) for all lenses. In that case, please write “W”. Also, in the case of mixing of different voltages, please indicate the display color “W”. (Ex: RW12/024)*4 Please download and fill in the XL type collective indicator light order sheet from our website.*5 W (milky white) is like an amber color of an incandescent lamp.

* Power supply voltage 200 / 220V is only AC.* In case of XL2000, until AC · DC 125V is available.

CodeItem

Basic type

Voltage

Color

No.

①

②③

Number of vertical lights

Number of horizontal lights

④

⑤

Description

XL2000

XL2040

XL3000

XL3600

XL4000

XL4800

XL3010

XL3040

XL4010

XL4001

XL4040

000

024

048

110

125

220

MIX

R

G

O

W*5

P

Y

B

M

Sise 24×24

Sise 24×24

Sise 30×30

Sise 30×60

Sise 40×40

Sise 40×80

Sise 30×30

Sise 30×30

Sise 40×40

Sise 40×40

Sise 40×40

With no LED unit

AC・DC24V

AC・DC48V

AC・DC100 / 110V

AC・DC125V

AC200 / 220V

Combination of multiple colors and different voltages

Combination of multiple colors

Remark

Power supply voltage 110V only

When 30 × 30 and 30 × 60 are mixed, it becomes

the basic form of one with many lights.






—


—

—

It becomes only the body frame part

—

—

—

—

A separate resistor is required for DC 200 / 220V.

XL2000 is excluded.

Please indicate quantity by display color, usage voltage.*2

—

—

—

—

XL3000 only

—

—

Please indicate the display color arrangement

［XL type］ Combination of single color and same voltage

XL3000 - 02 × 10 - 110 - R W① ② ③ ④ ⑤ *3

Combination of multiple colors and same voltage

XL3000 - 02 × 10 - 110 - M W Specification① ② ③ ④ ⑤ *3 *4

Combination of multiple colors and diferent voltages

XL3000 - 02 × 10 - MIX - M W Specification① ② ③ ④ ⑤ *3 *4

Red

Green

Orange

Milky White

Pure White

Yellow

Blue

Standard color

Special color

Please check below for the maximum number of lights.


1

2

3

B21

XL3000

３０× n ＋５

３０× m ＋５

３０３０× n ６

３０× m

３０× m＋１２

６

３０× n ＋１２

３０

３０

３０

６.５７０

M３ .５ ×８

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

１０

１４

XL2000

24 × n ＋５

24 × m ＋５

6

24

24

24 ×m

24 24 6

24 × m＋

12

24 ×n 24 × n＋12

M3.5 ×8

62 58.5

6.5

X2

X1

9.5


XL TYPE●LED TYPE

STANDARD PRODUCTSHOW TO ORDER

Fitting(XL-TK)


(XL20-CV)

Panel surface


Terminal cover



XL20-LED -

XL20-LENS-

XL20-CV

XL-TK

XL-SB5





LED unit

Lens

Terminal cover

Fitting

Jumper

Removing tool

Voltage label

Film

Panel surface


Fitting(XL-TK)




Lens

Terminal cover

Fitting

Jumper

Removing tool

Voltage label

Film


XL30-LED -

XL30-LENS-

XL-CV

XL-TK

DL-SB1





（30×30）

（24×24）

XL2000XL30 Series

Type Maximum number of lamps27 rows and 27 columns20 rows and 20 columns

XL36 Series 20 rows and 10 columnsXL40 SeriesXL48 Series

15 rows and 15 columns15 rows and 7 columns

*1 Please indicate the display color array as the upper left reference from the front view.*2 When mixed voltages are mixed, please display in order of display color, quantity, voltage.*3 It is also possible to use white (W) for all lenses. In that case, please write “W”. Also, in the case of mixing of different voltages, please indicate the display color “W”. (Ex: RW12/024)*4 Please download and fill in the XL type collective indicator light order sheet from our website.*5 W (milky white) is like an amber color of an incandescent lamp.

* Power supply voltage 200 / 220V is only AC.* In case of XL2000, until AC · DC 125V is available.

CodeItem

Basic type

Voltage

Color

No.

①

②③

Number of vertical lights

Number of horizontal lights

④

⑤

Description

XL2000

XL2040

XL3000

XL3600

XL4000

XL4800

XL3010

XL3040

XL4010

XL4001

XL4040

000

024

048

110

125

220

MIX

R

G

O

W*5

P

Y

B

M

Sise 24×24

Sise 24×24

Sise 30×30

Sise 30×60

Sise 40×40

Sise 40×80

Sise 30×30

Sise 30×30

Sise 40×40

Sise 40×40

Sise 40×40

With no LED unit

AC・DC24V

AC・DC48V

AC・DC100 / 110V

AC・DC125V

AC200 / 220V

Combination of multiple colors and different voltages

Combination of multiple colors

Remark









—


—

—

It becomes only the body frame part

—

—

—

—

A separate resistor is required for DC 200 / 220V.

XL2000 is excluded.

Please indicate quantity by display color, usage voltage.*2

—

—

—

—

XL3000 only

—

—

Please indicate the display color arrangement

［XL type］ Combination of single color and same voltage

XL3000 - 02 × 10 - 110 - R W① ② ③ ④ ⑤ *3

Combination of multiple colors and same voltage

XL3000 - 02 × 10 - 110 - M W Specification① ② ③ ④ ⑤ *3 *4

Combination of multiple colors and diferent voltages

XL3000 - 02 × 10 - MIX - M W Specification① ② ③ ④ ⑤ *3 *4

Red

Green

Orange

Milky White

Pure White

Yellow

Blue

Standard color

Special color



1

2

3

B22

A S

WIT

CH

B P

ILO

T L

AM

P &

IN

DIC

ATO

RD

ELE

CTR

ON

IC

DEV

ICES

C C

ON

NEC

TIN

G

DEV

ICES

E CO

NTR

OL

C

ENTE

R P

AR

TS


XL4000

４０× n ＋５

４０× m ＋５

４０× n ４０

６

４０× m

４０× m＋１２

６

４０× n ＋１２

４０

６.５７０

M３ .５ ×８

X２ X１

１０

１４

X２ X１

X２ X１

X２ X１

XL4001

４０× n ＋５

４０× m ＋５

40 ×n 40 × n＋12

40

40 ×m

40 × m＋12

6

40

6

70 (1 2.2 )

M3.5 ×8

8°

X２ X１

１０

１４

X２ X１

X２ X１

X２ X１

XL3600

６０× n ＋５

３０× m ＋５

６０× n ６

３０× m

３０× m＋１２

６

６０× n ＋１２

３０

３０

６.５７０

M３ .５ ×８

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

１０

１４

30×n＋12 30×n

30×m＋12

6 30 30

30×m 30

30

6.5

6.5

6

6.5 70

(XL-CV)

M3.5 ×8

XL3010

３０× n ＋５

３０× m ＋５

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

１０

１４

With one-point illuminationWith one-point illumination


Terminal cover


Fitting(XL-TK)

Panel surface


Lens

Terminal cover

Fitting

Jumper

Removing tool

Voltage label

Film


XL3010-LED -

XL3010-LENS-

XL-CV

XL-TK

DL-SB1





Panel surface

Mounting panel (t=1 to 6mm)Fitting

(XL-TK)



XL30-LED -

XL36-LENS-

XL-CV

XL-TK

DL-SB1





Lens

Terminal cover

Fitting

Jumper

Removing tool

Voltage label

Film




Lens

Terminal cover

Fitting

Jumper

Removing tool

Voltage label

Film


Panel surface


(XL-TK)



XL40-LED -

XL40-LENS-

XL-CV

XL-TK

DL-SB2





Oblique window type




(XL-CV)Terminal cover

Fitting(XL-TK)


Panel surface

XL40-LED -

XL4001-LENS-

XL-CV

XL-TK

DL-SB2




LED unit

Lens

Terminal cover

Fitting

Jumper

Removing tool

Voltage label

Film


（30×60）

（30×30）（40×40）

（40×40）

STANDARD PRODUCTS

●LED TYPEMULTI-WINDOW INDICATOR

XL TYPE

B23

XL4000

４０× n ＋５

４０× m ＋５

４０× n ４０

６

４０× m

４０× m＋１２

６

４０× n ＋１２

４０

６.５７０

M３ .５ ×８

X２ X１

１０

１４

X２ X１

X２ X１

X２ X１

XL4001

４０× n ＋５

４０× m ＋５

40 ×n 40 × n＋12

40

40 ×m

40 × m＋12

6

40

6

70 (1 2.2 )

M3.5 ×8

8°

X２ X１

１０

１４

X２ X１

X２ X１

X２ X１

XL3600

６０× n ＋５

３０× m ＋５

６０× n ６

３０× m

３０× m＋１２

６

６０× n ＋１２

３０

３０

６.５７０

M３ .５ ×８

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

１０

１４

30×n＋12 30×n

30×m＋12

6 30 30

30×m 30

30

6.5

6.5

6

6.5 70

(XL-CV)

M3.5 ×8

XL3010

３０× n ＋５

３０× m ＋５

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

１０

１４

With one-point illuminationWith one-point illumination


Terminal cover


Fitting(XL-TK)

Panel surface


Lens

Terminal cover

Fitting

Jumper

Removing tool

Voltage label

Film


XL3010-LED -

XL3010-LENS-

XL-CV

XL-TK

DL-SB1





Panel surface


(XL-TK)



XL30-LED -

XL36-LENS-

XL-CV

XL-TK

DL-SB1





Lens

Terminal cover

Fitting

Jumper

Removing tool

Voltage label

Film




Lens

Terminal cover

Fitting

Jumper

Removing tool

Voltage label

Film


Panel surface


(XL-TK)



XL40-LED -

XL40-LENS-

XL-CV

XL-TK

DL-SB2





Oblique window type





Fitting(XL-TK)


Panel surface

XL40-LED -

XL4001-LENS-

XL-CV

XL-TK

DL-SB2




LED unit

Lens

Terminal cover

Fitting

Jumper

Removing tool

Voltage label

Film


（30×60）

（30×30）（40×40）

（40×40）

STANDARD PRODUCTS

●LED TYPEMULTI-WINDOW INDICATOR

XL TYPE

B24

A S

WIT

CH

B P

ILO

T L

AM

P &

IN

DIC

ATO

RD

ELE

CTR

ON

IC

DEV

ICES

C C

ON

NEC

TIN

G

DEV

ICES

E CO

NTR

OL

C

ENTE

R P

AR

TS


XL4010

４０× n ＋５

４０× m ＋５

40 ×n 40 × n＋12

40

40 ×m

40 × m＋12

40

11

8.5

6

6

70 6.5

M3.5 ×8

X２ X１

１０

１４

X２ X１

X２ X１

X２ X１

XL4800

８０× n ＋５

４０× m ＋５

８０× n ６

４０× m

４０× m＋１２

６

８０× n ＋１２

４０

６.５７０

M３ .５ ×８

X２ X１

１０

１４

X２ X１

X２ X１

X２ X１


XL TYPE●LED TYPE


XL4010-LED -

XL4010-LENS-

XL-CV

XL-TK

DL-SB2






Panel surface


Fitting(XL-TK)



LED unit

Lens

Terminal cover

Fitting

Jumper

Removing tool

Voltage label

Film


XL40-LED -

XL48-LENS-

XL-CV

XL-TK

DL-SB2






Panel surface


(XL-TK)

(Square washerscrew)



LED unit

Lens

Terminal cover

Fitting

Jumper

Removing tool

Voltage label

Film

XL3040（30×30）

３０× n ＋５

３０× m ＋５

３０３０×n ６

３０×m

３０×m＋１２

６

３０× n ＋１２

３０

３０

３０

６.５７０

（XL-TK）

M３.５×８

（XL-CV）

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

X２ X１

１０

１４

XL3040-LED110-

XL30-LENS-

XL-CV

XL-TK

DL-SB1

XL-NQ

XL-NP

XL30-FM

XL2040（24×24）

24× n ＋５

24× m ＋５

6

2424

24×m

24 246

24×m＋

12

24×n24×n＋12

M3.5×8

6258.5

6.5

(XL-TK)

(XL20-CV)

XL2040-LED -

XL20-LENS-

XL20-CV

XL-TK

XL-SB5

XL-NQ

XL-NP

XL20-FM

X2

X1

9.5

AC・DC100/110V仕様のみとなります。


SPECIAL PRODUCTS

Conforming to power standard B-402




Fitting

Mounting panel (t=1 to 6)



Panel surface

(Sold separately)

(Sold separately)

(Sold separately)

(Sold separately)

(Sold separately)

(Sold separately)


LED unit

Lens

Terminal cover

Fitting

Jumper

Removing tool

Voltage label

Film

Terminal cover



Panel surface

Mounting panel (t=1 to 6)

Fitting


Terminal cover


LED unit

Lens

Terminal cover

Fitting

Jumper

Removing tool

Voltage label

Film

（40×40）

（40×80）


STANDARD PRODUCTS

B25

XL4040 （4 0×40 ）

４０× n ＋５

４０× m ＋５

４０× n ４０

６

４０× m

４０× m＋１２

６

４０× n ＋１２

４０

６.５７０

（XL-TK ）

M３ .５ ×８

（XL-CV ）

X２ X１

１０

１４

X２ X１

X２ X１

X２ X１

XL3000

XL3600

30×30

XL2000 24×24

30×60

XL4000 40×40

XL4800 40×80

XL3000, XL3010

XL2000

XL3600

XL4000, XL4001, XL4010

XL4800

XL3000-02 × 10-000

XL30

XL40

XL3000, XL3600

XL20 XL2000

XL4000, 4001, 4800

XL3010 XL3010

XL4010 XL4010

XL30-LED024-R

R

O

W

G

Y

B

024

048

110

125

220

24V AC / DC

48V AC / DC

125V AC / DC

100 / 110V AC / DC

220 / 220V AC

● XL30-LED □ -□ ● XL20-LED □ -□ ● XL40-LED □ -□ ● XL3010-LED □ -□ ● XL4010-LED □ -□

XL30

XL36

XL3000

XL20 XL2000

XL3600

XL40 XL4000

XL48 XL4800

XL4001 XL4001

XL3010 XL3010

XL4010 XL4010

XL30-LENS-R

R

O

W

G

Y

B

XL20

XL30

18.8

24.8

XL36 24.8

XL40 34.8

A

18.8

24.8

54.8

34.8

B

1.5

1.5

1.5

1.5

XL48 34.8 74.8 1.5

XL4001 34.8 34.8 1.5

XL3010 24.8 24.8 1.5

XL4010 34.8 34.8 1.5

B

A

● XL2000


● XL36-LENS -□ ● XL48-LENS -□

● XL20-LENS -□ ● XL30-LENS -□ ● XL40-LENS -□

●XL4001-LENS-□●XL3010-LENS-□●XL4010-LENS-□

Standard Rectangular One-point illumination Oblique

ACCESSORIES


XL TYPE●LED TYPE

Main frame (Order unit: 1)

HOW TO ORDER

Basic type

No. ofcolumns

No. ofrows

Frame only

Code Window size (mm) Compatible model

LED unit (Order unit: 10)

Code Compatible model

Basic type Illumination colorCode Color

Power supply voltageCode Voltage

HOW TO ORDERNote) To use XL3600 or XL4800, two LED units are required per lamp.

The LED unit for XL4000, XL4001 and XL4800 are common.

The LED unit for XL3000 and XL3600 are common.

Except for XL20

Red

Orange

Milky white

Blue

Green

Yellow

Lens (Order unit: 10)

Code Compatible model

Basic type Illumination colorCode Color

Red

Orange

Milky white

Blue

Green

Yellow

HOW TO ORDER

■Lens configuration

Color filterLensLamp base

To engrave letters, use the diffusion filter (milky white) as a nameplate.

Dimension(mm)

Code Thickness

(Thickness 1.5)White filter (for light diffusion)(Thickness 1.5)


XL TYPE●LED TYPE

MULTI-WINDOW INDICATO

XL TYPE●LED TYPE

SPECIAL PRODUCTS



Panel surface

Mounting panel (t=1 to 6)Fitting

(Square washerscrew)

Terminal cover

XL4040-LED110-

XL40-LENS-

XL-CV

XL-TK

DL-SB2






LED unit

Lens

Terminal cover

Fitting

Jumper

Removing tool

Voltage label

Film

●Color filter・　Diffusion filter size

B26

A S

WIT

CH

B P

ILO

T L

AM

P &

IN

DIC

ATO

RD

ELE

CTR

ON

IC

DEV

ICES

C C

ON

NEC

TIN

G

DEV

ICES

E CO

NTR

OL

C

ENTE

R P

AR

TS

●XL-NP

●XL-TK ●XL-NQ

100 / 110VAC / DC100 / 110VAC / DC

100 / 110VAC / DC100 / 110VAC / DC100 / 110VAC / DC

100 / 110VAC / DC100 / 110VAC / DC


100 / 110VAC / DC100 / 110VAC / DC


100 / 110VAC / DC100 / 110VAC / DC


XL-NP -110

２８

５

３０

７

24V AC / DC

48V AC / DC

125V AC / DC

100 / 110V AC / DC

220 / 220V AC

024

048

110

125

220

３０４ . ５

４ . １

３

４ . ２

８.５

３ 4０４ .3

４ . １

３

４ . ２

８

4

φ4

R3.5

9.5

30

9.5 φ 4

R3.5

DL-SB1 XL-SB1C XL-SB5 DL-SB2 XL-SB2C

R４.３

１１ . ５

４０

１１ . ５５. ２

R ４. ３

R ２. １

８

φ ４.２ 4

3 4.5

4 8

3

24

B

A

21 0

297

XL20-FM

XL30-FM

19.0

25.0

XL36-FM 25.0

XL40-FM 35.0

17.5

23.5

53.5 125

33.5

XL48-FM 35.0 73.5

9.5mm

21mm

２６

１, ０００

●XL-CV (for XL3000・4000 type)

R2

R1 D1

R3 LED

X1

X2 C1

C2

R1 D1

R3 R4 LED

X1

X2

Panel back dimension: 62㎜

(Cover in place)


(Cover in place)

The cover may be attached either vertically or horizontally in accordance with the crimp terminal connection type.

Jumper (Order unit: 100)

With insulation coatFor horizontal crossover only With insulation coat

(Thickness: 0.5) (Thickness: 0.5) (Thickness: 0.5) (Thickness: 0.5) (Thickness: 0.5)

Applicable to XL3000, 3010, 3040, 3600Applicable to XL2000 Applicable to XL4000, 4001, 4010, 4040, 4800

Fitting Film (Name label) A4 size (Order unit: 1)Removing tool

(Order unit: 10)(Order unit: 10)

Type Dimension A (mm) Dimension B (mm) No. of windowsLength (μm)

After printing letters, cut the film into pieces along the perforations with scissors. For printing, use a laser printer. With features of excellent heat resistance and weather resistance, the film is reliable to use.

Removal use for lens and LED unit

154 windows / sheet

88 windows / sheet

33 windows / sheet

48 windows / sheet

16 windows / sheet

Voltage label (Order unit: 10)

(20 sheets per set)

Code

Brown

Orange

Blue

Blue

Red

Background colorVoltage

Power supply voltage

For details of dimensions and specifications, contact Fuji Electric Industry.

TECHNICAL DATA

■Circuit diagram

Rated voltage: 24, 48, 100 / 110, 125V AC / DC(XL2000 / XL30 / XL40)

Rated voltage: 200 / 220V AC(XL30 / XL40)

R1: Limit resistance 1R2: Limit resistance 2R3: Illumination voltage control resistance R4: Protection resistance D1: Rectifying diodeLED: Light emitting diode C1: Limit capacitor C2: Protection capacitor

Note) The 220 V AC type of XL30 / XL40 develops an inrush current of approx. 70 mA (max.) per lamp. With the XL3600 / XL4800, the inrush current is approx. 140 mA (max.). Be careful about the power supply capacity. With the XL3600 / XL4800, two circuits (shown on the left) are connected in parallel.

■Component materials

Color frame

Lens

Housing

Unit

Terminal screw

Terminal cover

Terminal

Name RemarksMaterial

Modified PPO

Polycarbonate

Modified PPO

PBT

Copper alloy

Carbon steel

Polycarbonate

UL-94-V0, Oxygen index: 26 or higher



UL-94-V0

Tin solder plated

Nickel plated

UL94-V2

●Major component list■LED service life

●Life curve of LED used in FUJI ELECTRIC

INDUSTRY products (Typical case)

100

80

60

40

20

0101 102 103

Time (h)104 105

(Measured data)

(Estimated)

<Compliance with the Fire Law>

Re

lativ

e b

rig

htn

ess

(%

)

Generally, the brightness of LED decreases over time while energized. Fuji Electric Industry defines the time when LED brightness is reduced to half the initial value as the LED service life.(The brightness reduction rate varies depending on operating conditions such as temperature and humidity.)

Among all the components marked with (asterisk), those exposed on the panel surface are made of flame-retardant materials with a 26 or higher oxygen index.

Brightness reduction curve（Ta＝２５℃）


XL TYPE●LED TYPE

Terminal cover (Order unit: 10)

●XL20-CV (for XL2000 type)

ACCESSORIES

B27

●XL-NP

●XL-TK ●XL-NQ

100 / 110VAC / DC100 / 110VAC / DC


100 / 110VAC / DC100 / 110VAC / DC


100 / 110VAC / DC100 / 110VAC / DC


100 / 110VAC / DC100 / 110VAC / DC


XL-NP -110

２８

５

３０

７

24V AC / DC

48V AC / DC

125V AC / DC

100 / 110V AC / DC

220 / 220V AC

024

048

110

125

220

３０４ . ５

４ . １

３

４ . ２

８.５

３ 4０４ .3

４ . １

３

４ . ２

８

4

φ4

R3.5

9.5

30

9.5 φ 4

R3.5

DL-SB1 XL-SB1C XL-SB5 DL-SB2 XL-SB2C

R４.３

１１ . ５

４０

１１ . ５５. ２

R ４. ３

R ２. １

８

φ ４.２ 4

3 4.5

4 8

3

24

B

A

21 0

297

XL20-FM

XL30-FM

19.0

25.0

XL36-FM 25.0

XL40-FM 35.0

17.5

23.5

53.5 125

33.5

XL48-FM 35.0 73.5

9.5mm

21mm

２６

１, ０００

●XL-CV (for XL3000・4000 type)

R2

R1 D1

R3 LED

X1

X2 C1

C2

R1 D1

R3 R4 LED

X1

X2


(Cover in place)


(Cover in place)

The cover may be attached either vertically or horizontally in accordance with the crimp terminal connection type.

Jumper (Order unit: 100)

With insulation coatFor horizontal crossover only With insulation coat

(Thickness: 0.5) (Thickness: 0.5) (Thickness: 0.5) (Thickness: 0.5) (Thickness: 0.5)

Applicable to XL3000, 3010, 3040, 3600Applicable to XL2000 Applicable to XL4000, 4001, 4010, 4040, 4800

Fitting Film (Name label) A4 size (Order unit: 1)Removing tool

(Order unit: 10)(Order unit: 10)

Type Dimension A (mm) Dimension B (mm) No. of windowsLength (μm)

After printing letters, cut the film into pieces along the perforations with scissors. For printing, use a laser printer. With features of excellent heat resistance and weather resistance, the film is reliable to use.

Removal use for lens and LED unit

154 windows / sheet

88 windows / sheet

33 windows / sheet

48 windows / sheet

16 windows / sheet

Voltage label (Order unit: 10)

(20 sheets per set)

Code

Brown

Orange

Blue

Blue

Red

Background colorVoltage

Power supply voltage

For details of dimensions and specifications, contact Fuji Electric Industry.

TECHNICAL DATA

■Circuit diagram

Rated voltage: 24, 48, 100 / 110, 125V AC / DC(XL2000 / XL30 / XL40)

Rated voltage: 200 / 220V AC(XL30 / XL40)

R1: Limit resistance 1R2: Limit resistance 2R3: Illumination voltage control resistance R4: Protection resistance D1: Rectifying diodeLED: Light emitting diode C1: Limit capacitor C2: Protection capacitor

Note) The 220 V AC type of XL30 / XL40 develops an inrush current of approx. 70 mA (max.) per lamp. With the XL3600 / XL4800, the inrush current is approx. 140 mA (max.). Be careful about the power supply capacity. With the XL3600 / XL4800, two circuits (shown on the left) are connected in parallel.

■Component materials

Color frame

Lens

Housing

Unit

Terminal screw

Terminal cover

Terminal

Name RemarksMaterial

Modified PPO

Polycarbonate

Modified PPO

PBT

Copper alloy

Carbon steel

Polycarbonate




UL-94-V0

Tin solder plated

Nickel plated

UL94-V2

●Major component list■LED service life

●Life curve of LED used in FUJI ELECTRIC

INDUSTRY products (Typical case)

100

80

60

40

20

0101 102 103

Time (h)104 105

(Measured data)

(Estimated)

<Compliance with the Fire Law>

Re

lativ

e b

rig

htn

ess

(%

)

Generally, the brightness of LED decreases over time while energized. Fuji Electric Industry defines the time when LED brightness is reduced to half the initial value as the LED service life.(The brightness reduction rate varies depending on operating conditions such as temperature and humidity.)

Among all the components marked with (asterisk), those exposed on the panel surface are made of flame-retardant materials with a 26 or higher oxygen index.

Brightness reduction curve（Ta＝２５℃）


XL TYPE●LED TYPE

Terminal cover (Order unit: 10)

●XL20-CV (for XL2000 type)

ACCESSORIES

B28

A S

WIT

CH

B P

ILO

T L

AM

P &

IN

DIC

ATO

RD

ELE

CTR

ON

IC

DEV

ICES

C C

ON

NEC

TIN

G

DEV

ICES

E CO

NTR

OL

C

ENTE

R P

AR

TS


XL30-LED110-□

R2

R1D1

R3 LED

X1

X2

＝＝10kΩ 11mA

220V－110VRa＝

▲ ▲

▲

▲ ▲

Wiring for XL3000-05 x 10

Ex. 1 To route wires inside the terminal cover (XL-CV)[Along cover lateral side]

Ex. 2 To route wires outside the terminal cover (XL-CV) [Along cover vertical side]

Align wires between the units and route the wires downward or upward.

Draw wires so they clear the cover and route the wires downward or upward.

■Separate resistor setup●(Example) To use the 110 V type indicator

with 220 V DC power supply:

■Voltage fluctuations(Voltage fluctuation range and illumination time)

Note) To consider heat generation during illumination, use the indicator

under the following conditions:

220V DC (Power supply voltage)

Ra (Separate resistor)

(Rated voltage of indicator)

(Power supply voltage) – (Rated voltage of indicator)

Number oflamps

assembled

Max. operating voltage range (Time)

Up to4 lamps

Up to5 lamps

All windows ON 50% max. 30% max.

(continuous)

———

(continuous)

(continuous)

XL3640

XL4040

30×60

XL2040 24×24

XL3040 30×30 Rated voltage:100 / 110V

AC / DC only40×40

XL4840 40×80

Window size (mm)Basic type Power supply voltage

The minimum operating voltage is set at -15% of the rated voltage in

consideration of the brightness. For detailed information, contact Fuji

Electric Industry.

■The following modes conform to the power standard (B402).For detailed information, contact Fuji Electric Industry.

●●

＋15％（３ｈ）

＋15％

＋30％（３ｈ）＋30％

＋15％

＋30％（３ｈ）


XL TYPE●LED TYPE

■Wiring

TECHNICAL DATA

To use many lamps, consider the wiring route by referring to the following examples:Use thorough caution with the wiring route, so that you can easily check the screw tightening conditions and wire numbers.

■How to remove lenses

INSTRUCTION MANUAL

Press the suction cup of the removing tool (XL-NQ) against the lens and then remove the lens.

■How to remove LED units

■How to mount LED units and lenses

Assemble the lens to the LED unit and then insert them together into the main body.Sufficiently press the lens with your finger until it stops.Note: Do not try to directly press the LED unit with your fingers.

■Instructions

Hook the wider claw of the removing tool (XL-NQ) onto the LED unit removing slit and then pull out the LED unit horizontally.

●The terminal screws should be tightened at 0.8 N·m.●To connect wiring, be sure to use an insulating tube or

the like.●To mount the main body to the panel, use fittings

(XL-TK).●The fittings (XL-TK) should be tighten at 0.2 N·m.●The fittings (XL-TK) should be positioned diagonally.

●The LED unit should be inserted into the main body with the lens assembled to the LED unit.●To remove the LED unit, hook the leading end of the

stick of the removing tool (XL-NQ) onto the LED unit removing slit and then pull out the LED unit toward you.●To remove the lens, press the suction cup of the

removing tool (SL-NQ) against the lens and then pull out the lens.

B29

XL30-LED110-□

R2

R1D1

R3 LED

X1

X2

＝＝10kΩ 11mA

220V－110VRa＝

▲ ▲

▲

▲ ▲

Wiring for XL3000-05 x 10

Ex. 1 To route wires inside the terminal cover (XL-CV)[Along cover lateral side]

Ex. 2 To route wires outside the terminal cover (XL-CV) [Along cover vertical side]

Align wires between the units and route the wires downward or upward.

Draw wires so they clear the cover and route the wires downward or upward.

■Separate resistor setup●(Example) To use the 110 V type indicator

with 220 V DC power supply:

■Voltage fluctuations(Voltage fluctuation range and illumination time)

Note) To consider heat generation during illumination, use the indicator

under the following conditions:

220V DC (Power supply voltage)

Ra (Separate resistor)

(Rated voltage of indicator)

(Power supply voltage) – (Rated voltage of indicator)

Number oflamps

assembled

Max. operating voltage range (Time)

Up to4 lamps

Up to5 lamps

All windows ON 50% max. 30% max.

(continuous)

———

(continuous)

(continuous)

XL3640

XL4040

30×60

XL2040 24×24

XL3040 30×30 Rated voltage:100 / 110V

AC / DC only40×40

XL4840 40×80

Window size (mm)Basic type Power supply voltage

The minimum operating voltage is set at -15% of the rated voltage in

consideration of the brightness. For detailed information, contact Fuji

Electric Industry.

■The following modes conform to the power standard (B402).For detailed information, contact Fuji Electric Industry.

●●

＋15％（３ｈ）

＋15％

＋30％（３ｈ）＋30％

＋15％

＋30％（３ｈ）


XL TYPE●LED TYPE

■Wiring

TECHNICAL DATA

To use many lamps, consider the wiring route by referring to the following examples:Use thorough caution with the wiring route, so that you can easily check the screw tightening conditions and wire numbers.

■How to remove lenses

INSTRUCTION MANUAL

Press the suction cup of the removing tool (XL-NQ) against the lens and then remove the lens.

■How to remove LED units

■How to mount LED units and lenses

Assemble the lens to the LED unit and then insert them together into the main body.Sufficiently press the lens with your finger until it stops.Note: Do not try to directly press the LED unit with your fingers.

■Instructions

Hook the wider claw of the removing tool (XL-NQ) onto the LED unit removing slit and then pull out the LED unit horizontally.

●The terminal screws should be tightened at 0.8 N·m.●To connect wiring, be sure to use an insulating tube or

the like.●To mount the main body to the panel, use fittings

(XL-TK).●The fittings (XL-TK) should be tighten at 0.2 N·m.●The fittings (XL-TK) should be positioned diagonally.

●The LED unit should be inserted into the main body with the lens assembled to the LED unit.●To remove the LED unit, hook the leading end of the

stick of the removing tool (XL-NQ) onto the LED unit removing slit and then pull out the LED unit toward you.●To remove the lens, press the suction cup of the

removing tool (SL-NQ) against the lens and then pull out the lens.

B30

A S

WIT

CH

B P

ILO

T L

AM

P &

IN

DIC

ATO

RD

ELE

CTR

ON

IC

DEV

ICES

C C

ON

NEC

TIN

G

DEV

ICES

E CO

NTR

OL

C

ENTE

R P

AR

TS


SS

250V

SQ MS

20mA or less 25mA

100MΩor more

Water-proof / dust-proof（IP65）

150g 250g


Rated current

Withstand voltage

Lightning impulse


Shock resistance

Service life

Location of use



Weight

TypeSpecification

MACLIT INDICATOR

FEATURES

■The Maclit indicator is operated by the electromagnetic polarity inversion method. The status is displayed by rotating the display part. The SS and MS types have built-in LED for night time use.

■SS and MS can display 3 states; “Load ON”, “Load OFF”, “Loss of power to the indicator”.

■Materials with high weather resistance are available for outdoor equipment (SQ and MS types).

■The Maclit Indicator can operate at low power consumption. It offers various advantages including energy saving, space saving, and maintenance free.

■The MS type is provided with the residual display function. When the display power source is lost, the color displayed immediately before that loss and the other colors appear at their respective ratios of 2/3 and 1/3 on the display part. This function allows you to identify the status at a glance in which the power source has been lost (except for the MSD indicator).


2,500V AC / 1 min.

±7kV / 3 times for each pole (1.2 / 50µs)

50G or more

Indoor

Closed type

300,000 times or more 100,000 times or more

Indoor / outdoor

–20 to 50°C –20 to 60°C

XL TYPE MULTI-WINDOW INDICATOR ORDER SHEET

XL — — —×

CompanynameE-mail

address

Personin charge

Phone No.

Ordertype

Quantity Units Deliveryperiod

(DD / MM / YY)Order No.

Basic type No. ofrows

Power supplyvoltage

Illuminationcolor

Color(when unlit)

No. ofcolumns

Order date (Year / Month / Day )

Illumination Color and Power Supply Voltage Layout Diagram

Example

01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20

01

02

03

04

05

06

07

08

09

10

Voltage

Voltage

Voltage

Voltage

Voltage

Voltage

Voltage

Voltage

Voltage

Voltage

01 02 03 04 05 06 07 08 09 10

If an illumination color is not specified, the color of the illumination face is □.

If a power supply voltage is not specified, the voltage is V.□ □ □

XL2000/XL30/XL40

XL36/XL48

01 02 03 04 05 06 07 08 09 10

01

Voltage

01 02 03 04 05

R

G W O024 024

Row

Column

Column

Row

Indicates an order for XL2000 / XL30 / XL40 with an illumination color of “O” and power supply voltage of “024”.

Indicates an order for XL2000 / XL30 / XL40 with an illumination color of “W” and power supply voltage of “024”.

Indicates an order for XL2000 / XL30 / XL40 with an illumination color of “G” and power supply voltage of “110”.

Indicates an order for XL2000 / XL30 / XL40 with an illumination color of “R” and power supply voltage of “110”.

●Draw a solid line to show the shape of the illumination frame to order in the following layout diagram. ●For the lens color arrangement, specify the illumination color code (R, O, W, G, Y, B). ●To specify a combination of different voltages, specify the power supply voltage code (024, 048, 110, 125, 220). ●Before you issue an order, thoroughly check the contents of your order. For orders with a short delivery

period, we may not accept cancellation or change of your order.

If an illumination color is not specified, the color of the illumination face is □.

If a power supply voltage is not specified, the voltage is V.□ □ □ 1 1 0

B31

Documents

24 square / 30 square / 40 square series FEATURES · (XL20-CV) Panel surface (Square washer screw) Terminal cover Applicable accessories Panel cut dimensions XL20-LED - XL20-LENS-XL20-CV