24 3814 YZ LD 000002 IS01 List of Codes and Standrs

LIST OF CODES AND STANDARDS

Document Identification Code

3814-YZ-LD-000002

Sheet 1 / 11 Issue 01 Client: CDEEE - Corporación Dominicana de Empresas Eléctricas Estatales

Plant: 2x376 MWe Coal-Fired Power Plant Location: Punta Catalina, Baní República Dominicana

This document is CDEEE’s property, and cannot be used by others for any purpose, without prior written consent


03

02

01 Feb 28, 2014 ISSUE FOR COMMENTS F. Della Torre A. Canducci A. Canducci

Issue Date Reason for Issue – Revision Description Prepared Checked Approved



3814-YZ-LD-000002




CONTENTS

1 SCOPE .............................................................................................................................................. 3

1.1 GENERAL ..................................................................................................................................... 3 1.2 LIST OF CODES AND STANDARDS ACCORDING “ESPECIFICACIONES TECNICAS” (ITB) ....................... 3 1.3 LIST OF LOCAL CODES AND STANDARDS ........................................................................................ 9 1.4 ADDITIONAL CODES AND STANDARDS .......................................................................................... 10



3814-YZ-LD-000002




1 SCOPE

1.1 General

For general PROJECT definitions (COMPANY, CONTRACTOR, PROJECT, etc.) and abbreviations, refer to the document:

Project Procedure Coordination 3814-MZ-PC-000001.

The design, development and implementation of the PROJECT shall comply with the applicable codes and standards, as listed in the following paragraphs.

If a particular code, or if another applicable standard, supports or provides more than one level of quality, CONTRACTOR shall comply with the more demanding prescription, as determined by COMPANY.

Apart from the codes and standards, the CONTRACTOR shall comply with the applicable Dominican legislation. In case of discrepancy between the applicable Dominican legislation and applicable codes and standards, the more demanding one, that encourages the full and thorough completion of the works in optimal conditions, shall prevail, as determined by the COMPANY.

This DOCUMENT incorporates the PROJECT requirements contained in the following contractual documentation:

“Condiciones generales del contrato de EPC de 19 Septiembre de 2013”

“Especificaciones Tecnicas de 04 de Julio de 2013” and “Adenda No. 1 de 04 de Septiembre 2013”

1.2 List of codes and standards according “Especificaciones Tecnicas” (ITB)

1.2.1 Schedule of references:

AAMA – American Architectural Manufacturers Associations

AASHTO – American Association of State Highway and Transportation Officials

ABMA - American Bearing Manufacturers Association

ACGIH - American Conference of Industrial Hygienists

ACI - American Concrete Institute

AEIC - Association of Edison Illuminating Companies

AGMA - American Gear Manufacturers Association

AISC - American Institute of Steel Construction

AISI – American Iron and Steel Institute

AMCA - Air Movement and Control Association

ANSI - American National Standards Institute

API - American Petroleum Institute

APWA – American Public Works Association

ASCE - American Society of Civil Engineers

ASHRAE – American Society of Heating, Refrigeration, Air Conditioning Engineers



3814-YZ-LD-000002




ASME - American Society of Mechanical Engineers

ASTM – International Standards Worldwide

AWS – American Welding Society

AWWA – American Water Works Association

BOCA – Building Officials and Code Administrators

CEMA – Conveyor Equipment Manufacturer’s Association

CMAA – Crane Manufacturers Associations of America

CRSI - Concrete Reinforcing Steel Institute

EEMUA - Engineering Equipment and Material Users’ Association

EIA - Electronic Industry Association

EJMA - Expansion Joint Manufacturers Association

EMACC - Energy Materials Coordinating Committee

EN – European Standard

EPA - Environmental Protection Agency

FM – FM Global

HEI – Heat Exchange Institute

HMI - Hoist Manufacturer's Institute

IBC - International Building Code (2009)

ICAC - Institute of Clean Air Companies

ICBO – International Conference of Building Officials

ICC - International Code Council, Inc.

ICEA – Insulated Cable Engineers Association

IEC - International Electrotechnical Commission

IEEE - Institute of Electrical and Electronics Engineers

IES - Illuminating Engineering Society

IESNA - Illuminating Engineering Society of North America

IETA - International Electrical Testing Association - Acceptance Testing Specifications for Electric Power Distribution Equipment and Systems

IFC - International Fire Code

IMC - International Mechanical Code

IPC - International Plumbing Code

ISA - The Instrumentation, Systems, and Automation Society

ISO - International Standards Organization

LPI – Lightning Protection Institute

MBMA – Metal Building Manufacturers Association

http://books.google.it/books?id=Qj12AFpD_SMC&pg=PA132&lpg=PA132&dq=EMACC+REGULATORYU&source=bl&ots=jikogKCn-u&sig=f4RSfL3aQsbAbFZi0AslpCK3z9w&hl=it&sa=X&ei=vwoLU6WFL-Kq4ATkk4CABg&ved=0CDMQ6AEwAQ



3814-YZ-LD-000002




MCAA – Measurement Control and Automation Association (formerly Scientific Apparatus and Manufacturers Association (SAMA))

MIMARENA – “Ministerio de Medio Ambiente y Recursos Naturales”

MPI – Master Painting Institute

MSS - Manufacturer's Standardization Society of the Valve and Fittings Industry

NEC - National Electrical Code

NEMA - National Electrical Manufacturers' Association

NERC – National Electric Reliability Council

NESC - National Electrical Safety Code

NETA – Inter-National Electrical Testing Association

NFPA - National Fire Protection Association

NRMCA - National Ready Mix Concrete Association

NSF - National Sanitation Foundation

OSHA – U. S. Department of Labor, Occupational Safety and Health Administration

PCI - Precast/Prestressed Concrete Institute

PDI - Plumbing and Draining Institute

PFI - Pipe Fabrication Institute

SAMA - Scientific Apparatus Makers Association

SBCCI - Southern Building Code Congress International

SDI - Steel Deck Institute

SSPC – Steel Structures Painting Council

STI – Steel Tank Institute

TEMA - Tubular Exchanger Manufacturers Association

UFC - Unified Facilities Criteria

UL - Underwriters' Laboratories, Inc.

WRI - Wire Reinforcement Institute

International Finance Organization –World Bank Group - Environmental, Health and Safety Guidelines for Thermal Power Plants

1.2.2 Specific codes and standards required for PROJECT development

Abbreviations, symbols and drawings:

ANSI Y1.1 and IEEE 260

ANSI Y32.2/IEEE 315/CSA Z99

Specific requirements:

AAMA 2605

AASHTO H-20, AASHTO HS-20, AASHTO LTS-3



3814-YZ-LD-000002




ACGIH 0100,

ACI 2009 Manual of Standard Practice,

ACI Guide for Design and Construction of Fixed Offshore Concrete Structures

ACI 117, ACI 207R, ACI 211.1, ACI 214, ACI 301, ACI 304, ACI 304R, ACI 305, ACI 305R, ACI 307-08, ACI 308, ACI 309, ACI 309R, ACI 311, ACI 315, ACI 318, ACI 318M, ACI 347, ACI 351.3R-04, ACI 357, ACI 357R-84, ACI 530

AEIC CS6

AISC Steel Construction Manual

AISC Steel Design Guide

AISC “Specification for the Design, Fabrication, and Erection of Structural Steel for Buildings.”

AISC 303-05, AISC 341-05, AISC 360-05

AISI 1012, AISI 1015, AISI 4140

AISI “Specification for the Design of Cold-Formed Steel Structural Members”

ANSI 70, ANSI 802.3, ANSI B16.5, ANSI B17.1, ANSI B20.2, ANSI B30.16, ANSI B31, ANSI C2, ANSI C12.11, ANSI C12.16, ANSI C12.20, ANSI C29.9, ANSI C37.04, ANSI C37.06, ANSI C37.09, ANSI C37.10, ANSI C37.11, ANSI C37.13, ANSI C37.17, ANSI C37.20, ANSI C37.32, ANSI C37.90, ANSI C50.13, ANSI C50.41, ANSI C57.12.00, ANSI C57.12.01, ANSI C57.12.10, ANSI C57.12.14, ANSI C57.12.22, ANSI C57.12.25, ANSI C57.12.26, ANSI C57.12.28, ANSI C57.12.90, ANSI C57.13, ANSI C57.91, ANSI C57.113, ANSI C57, ANSI C58.12.25, ANSI C62.11, ANSI C62.41, ANSI C68.1, ANSI C78.1300, ANSI C80.1, ANSI C80.3, ANSI C80.4, ANSI C80.5, ANSI C81.10-76, ANSI C81.61-90, ANSI C82, ANSI C93.1M, ANSI C93.2, ANSI C136.20, ANSI H35.1-88, ANSI MC96.1, ANSI S2.19, ANSI Z55.1

ANSI/ASME B1.20.1, ANSI/ASME B16.1, ANSI/ASME B16.5, ANSI/ASME B16.34, ANSI/ASME B30.11, ANSI/ASME B31.1

ASME Boiler and Pressure Vessel Code

ASME 4.1, ASME A13.1 , ASME A17.1, ASME A17.2, ASME B16.10, ASME B16.18, ASME B16.25, ASME B16.47, ASME B20.1, ASME B31.12

ASME PTC 4, ASME PTC 6, ASME PTC 19.3, ASME PTC 19.11, ASME PTC 46, ASME QW-483, ASME QW-484, ASME TDP-1

ANSI/IEEE 115, ANSI/IEEE 141, ANSI/IEEE 242, ANSI/IEEE 666, ANSI/IEEE C29, ANSI/IEEE C37.09, ANSI/IEEE C37.12, ANSI/IEEE C37.13, ANSI/IEEE C37.20.2.2, ANSI/IEEE C37.20.7; ANSI/IEEE C37.23, ANSI/IEEE C37.24, ANSI/IEEE C37.90.1, ANSI/IEEE C37.90.2, ANSI/IEEE C37.91, ANSI/IEEE C37.97, ANSI/IEEE C37.101, ANSI/IEEE C37.102, ANSI/IEEE C37.106, ANSI/IEEE C37.110, ANSI/IEEE C37.113, ANSI/IEEE C57.12.00, ANSI/IEEE C57.12.01, ANSI/IEEE C57.12.14, ANSI/IEEE C57.12.25

IEEE 4, IEEE 18, IEEE 32, IEEE 43, IEEE 48, IEEE 80, IEEE 81, IEEE 85, IEEE 95, IEEE 112, IEEE 118, IEEE 142, IEEE 383, IEEE 386, IEEE 421.1, IEEE 421.2, IEEE 421.3, IEEE 421.5, IEEE 446, IEEE 450, IEEE 485, IEEE 519, IEEE 576, IEEE 605, IEEE 762, IEEE 802.3, IEEE 837, IEEE 841, IEEE 946, IEEE 980, IEEE 998, IEEE 1119, IEEE 1184, IEEE 1036, IEEE 1202

IEEE C37.21, IEEE C37.90.1, IEEE C50.13, IEEE C57.12.10, IEEE C57.12.80, IEEE C57.12.90,



3814-YZ-LD-000002




IEEE C57.19.00, IEEE C57.19.01, IEEE C57.98, IEEE C57.113, IEEE C57.116, IEEE C57.131, IEEE C62.41, IEEE C62.45, IEEE C136.10

ANSI/IES RP-7, ANSI/IES RP-8, ANSI/NETA ATS-2009

API 650

ASCE Structural Design of Air and Gas Ducts for Power Stations and Industrial Boiler Applications, ASCE Substation Structure Design Guide Manual

ASCE 5, ASCE 6, ASCE 7-05, ASCE 24-05, ASCE 37-02, ASCE 113

ASTM A6, ASTM A36/A36M, ASTM A53/A53M, ASTM A 82, ASTM A105, ASTM A106, ASTM A121, ASTM A123/A123M, ASTM A153/A153M, ASTM A185, ASTM A194, ASTM A213, ASTM A240/A240M, ASTM A242, ASTM A269, ASTM A283, ASTM A307, ASTM A312, ASTM A325/A325M, ASTM A385, ASTM A390, ASTM A392, ASTM A394, ASTM A441, ASTM A479, ASTM A490/A490M, ASTM A491, ASTM A 497, ASTM A499, ASTM A500, ASTM A504, ASTM A514, ASTM A515, ASTM A517, ASTM A542, ASTM 526, ASTM A529/A529M, ASTM A563/A563M, ASTM A570, ASTM A572/A572M, ASTM A588, ASTM A611, ASTM A615/A615M, ASTM A653, ASTM A675, ASTM A706, ASTM A775/A775M, ASTM A792, ASTM A824, ASTM A871, ASTM A934/A934M, ASTM A992/A992M, ASTM A1011, ASTM AR400,

ASTM B3, ASTM B8, ASTM B26, ASTM B33, ASTM B117, ASTM B189, ASTM B209, ASTM B230, ASTM B232, ASTM B245, ASTM B429, ASTM B695

ASTM C31, ASTM C33, ASTM C39/C39M, ASTM C40, ASTM C42/C42M, ASTM C76, ASTM C94/C94M, ASTM C108, ASTM C131, ASTM C138, ASTM C142, ASTM C143/C143M, ASTM C150, ASTM C172, ASTM C173, ASTM C192/C192M, ASTM C195, ASTM C231, ASTM C260, ASTM C309, ASTM C330, ASTM C478, ASTM C494/C494M, ASTM C533, ASTM C547, ASTM C592, ASTM C595, ASTM C612, ASTM C618, ASTM C836, ASTM C881, ASTM C920, ASTM C989, ASTM C1064/C1064M, ASTM C1090, ASTM C1107, ASTM C1218, ASTM C1252, ASTM C1602

ASTM D117, ASTM D149, ASTM D235, ASTM D242, ASTM D256A, ASTM D523, ASTM D638, ASTM D698, ASTM D792, ASTM D877, ASTM D1472, ASTM D1533, ASTM D1556, ASTM D1557, ASTM D1752, ASTM D1894, ASTM D1933, ASTM D2103, ASTM D2167, ASTM D2216, ASTM D2419, ASTM D2794, ASTM D2847, ASTM D2922, ASTM D3017, ASTM D3363, ASTM D3487, ASTM D4059, ASTM D4263, ASTM D4444, ASTM D6386

ASTM E329, ASTM E548, ASTM E605, ASTM E736, ASTM E1745

ASTM F436/F436M, ASTM F512, ASTM F563, ASTM F900, ASTM F959/F959M, ASTM F1083, ASTM F1554, ASTM F1852, ASTM F1869, ASTM F2280, ASTM F2329

AWS D1.1, AWS D1.2, AWS D1.4, AWS D1.6, AWS D9.1, AWS D12.1

AWWA C207, AWWA C210, AWWA C606, AWWA C906, AWWA D100, AWWA D103

CMAA “Specification #70 for Electric Overhead Traveling Cranes”

CRSI 63, CRSI 65

EEMUA 191

EIA 232-D, EIA RS-455, EIA TIA 455-25A, EIA 455-41, EIA 455-59

EMACC G8.2, EMACC E14.1



3814-YZ-LD-000002




EN 61000-4-2, EN 61000-4-2

HEI Standard for Steam Surface Condenser

HEI Performance Standard for Liquid Ring Vacuum Pumps

HEI Standards for Closed Feedwater Heaters

HEI Standards and Typical Specifications for Deaerators

HMI-100

ICEA S-19-81, ICEA S-93-639, ICEA T-29-520

IEC 534-8-3, IEC 751, IEC 60068, IEC 60255, IEC 61131

ISA 7.0.01, ISA S7.0.01, ISA S75.01, ISA S75.17

ANSI/ISA-18.2, ANSI/ISA-50.00.01, ANSI/ISA-51.1

ISO 1940, ISO 5049-1, ISO 9000, ISO 9001, ISO 10816

LPI 175

MBMA “Low Rise Building Systems Manual”, MBMA-01

MPI 1, MPI 2, MPI 4, MPI 9, MPI 19, MPI 20, MPI 21, MPI 22, MPI 39, MPI 42, MPI 45, MPI 47, MPI 48, MPI 50, MPI 57, MPI 77, MPI 79, MPI 90, MPI 95, MPI 101, MPI 107, MPI 108, MPI 113, MPI 116, MPI 141, MPI 145, MPI 164

MSS-SP45, MSS-SP58, MSS-SP61

NEMA 1, NEMA 2, NEMA 3R/3S, NEMA 4, NEMA 12, NEMA 250, NEMA 270, NEMA AB1, NEMA B150, NEMA CC1, NEMA FA 1, NEMA HV1, NEMA ICS 1, NEMA ICS 2, NEMA ICS 3, NEMA ICS 4, NEMA ICS 6, NEMA MG1, NEMA MG2, NEMA OD 3, NEMA SG2, NEMA SG4, NEMA SG5, NEMA SG6, NEMA SH5, NEMA TC2, NEMA TC3, NEMA TC6, NEMA TC8, NEMA TC9, NEMA TR1, NEMA RN1, NEMA SH5, NEMA VE1, NEMA WC74

NFPA 12/12B, NFPA 13/13A, NFPA 15, NFPA 16, NFPA 17/17A, NFPA 20, NFPA 24, NFPA 30, NFPA 37, NFPA 50A, NFPA 68, NFPA 70, NFPA 70E, NFPA 71, NFPA 72, NFPA 75, NFPA 77, NFPA 85, NFPA 90A/90B, NFPA 91, NFPA 101, NFPA 110, NFPA 497, NFPA 499, NFPA 650, NFPA 654, NFPA 780, NFPA 820, NFPA 850

NRMCA "Concrete Plant Standards", "Truck Mixer and Agitator Standards", NRMCA QC3

NSF/ANSI standard 61

PCI 2004 Bridge Design Manual Chapter 20

PCI MNL-116, PCI MNL-120

PDI Standard WH-201

SAMA RC-17

SSPC-PA1, SSPC-PA Guide 3, SSPC Paint 16, SSPC-QP1, SSPC-SP1, SSPC-SP2, SSPC-SP3, SSPC-SP6, SSPC-SP7, SSPC-SP10, SSPC-SP12

UFC 4-152-01

UL 1, UL 6, UL 6A, UL 44, UL 50, UL 57, UL 83, UL 96, UL 96A, UL 347, UL 347A, UL 360, UL 467, UL 489, UL 496, UL 508, UL 508C, UL 514A, UL 542, UL 595, UL 651, UL 676, UL 773, UL 773A, UL 797, UL 864, UL 869A, UL 870, UL 884, UL 924, UL 935, UL 1004, UL 1029, UL 1072,



3814-YZ-LD-000002




UL 1242, UL 1277, UL 1283, UL 1449, UL 1569, UL 1570, UL 1571, UL 1572, UL 1581, UL 1684, UL 1778, UL 1971, UL 2200, UL VW1

1.3 List of local codes and standards

1.3.1 Electrical local codes (Codigo de Rete):

Ley General de Electricidad No. 125-01

Codigo de Conexion

1.3.2 Environmental local codes (Mimarena)

Ley General Sobre Medio Ambiente y Recursos Natural

Normas y Procedimientos para Permisos Ambientales

NORMA AMBIENTAL SOBRE CALIDAD DEL AGUA Y CONTROL DE DESCARGAS

NORMA AMBIENTAL SOBRE CALIDAD DE AGUAS SUBTERRÁNEAS Y DESCARGAS AL SUBSUELO

Resolucion N.16 – 2008 Dragadorio.

NORMAS AMBIENTALES DE CALIDAD DEL AIRE Y CONTROL DE EMISIONES

REGLAMENTO PARA LA REDUCCIÓN Y ELIMINACIÓN DEL CONSUMO DE LAS SUSTANCIAS AGOTADORAS DE LA CAPA DE OZONO

NORMA PARA LA GESTIÓN AMBIENTAL DE MARINAS

NORMAS AMBIENTALES PARA LA PROTECCIÓN CONTRA RUIDOS

REGLAMENTO PARA LA GESTION INTEGRAL DE ACEITES USADOS

NORMA PARA LA GESTIÓN AMBIENTAL DE RESIDUOS SÓLIDOS NO PELIGROSOS

Reglamento de Etiquetado e Información de Riesgo y Seguridad De Materiales Peligrosos

REGLAMENTO AMBIENTAL PARA USO, MANEJO, TRANSPORTE Y DISPOSICIÓN DE BIFENILOS POLICLORADOS (PCB)

Reglamento para la Transportación de Sustancias y Materiales Peligrosos

REGLAMENTO PARA LA GESTIÓN DE SUSTANCIAS Y DESECHOS QUIMICOS PELIGROSOS EN LA REPUBLICA DOMINICANA

REGLAMENTO AMBIENTAL PARA PLANTAS DE ALMACENAMIENTO, ENVASADO Y EXPENDIO DE GAS LICUADO DE PETROLEO.

1.3.3 Engineering local codes (Reglamentos Ingenieria)

Evaluacion_de_Codigo_por_Viento (Manual Diseño Viento)

M-002 ESTACIONAMIENTO VEHICULAR

M-003 INSTALACIONES ELECTRICAS

M-005 REGLAMENTO PARA DIBUJOS EDIFICACIONES

M-007 Regl. Proyectar sin Barreras Arquit.



3814-YZ-LD-000002




M-009 ESPECIFICACIONES GENERALES

M-010 INSTALACIONES ELECTRICAS PARTE2

M-011 Crit. Bás. Estudios Geotec. Carret.

M-012 DISENO GEOMETRICO DE CARRETERAS

M-013 Instr.Present. Prop. Estud. Proy. Carret.

M-014 ESPECIFICACIONES GRAL. CONSTRUCCION DE CARRETERAS

M-016 RECOMENDACIONES PARA VIVIENDA URBANA

M-017 Presentacion_de_proyectos_viales PALOMINO

M-018 Diseño Flexocompr. Muros Armados

M-019 RECOMENDACIONES SISTEMA DE DRENAJE CARRETERAS

M-020 MANUAL AMBIENTAL PARA DISENO Y CONSTRUCCION DE PROYECTOS VIALES

PT-1 Efectos P-D en la Respuesta Sísmica No Lineal

R-001 REGLAMENTO SISMICO

R-004 SUPERVISION R-006 RECOMENDADIONES ANÁLISIS SÍSMICO EJEMPLOS

R-008 INSTALACIONES SANITARIAS

R-021 REQTOS DE APLICACION REGTO GRAL. EDIF. TRAT. PLANO

R-022 Regl. Dis. Const. Subest. Distr. Media a Baja Tensión

R-023 REGLAMENTO PLANTAS FISICAS ESCOLARES

R-024 ESTUDIOS GEOTECNICOS

R-025 PLANTAS ELECTRICAS DE EMERGENCIA

R-026 EXCAVACION DE ZANJAS

R-027 REGLAMENTO MAMPOSTERIA

R-028 REGLAMENTO ACERO

R-029 REGLAMENTO MADERA

R-030 REGLAMENTO GLP

R-031 CIRCULACION VERTICAL

R-032 Decreto No 85-11 – Reglamento para la Securidad y Proteccion Contra Incendios

REQUISITOS PARA EVALUACION ESTRUCTURAL DE EDIFICIOS EXISTENTES O INICIADOS

1.4 Additional codes and standards

1.4.1 Included in Technical Proposal

ARI - Air conditioning and refrigeration Institute

EN 779, EN 1822

KKS (Kraftwerk Kennzeichen System): Identification System for Power Plants

SMACNA - Sheet Metal and Air Conditioning National Association, Inc.



3814-YZ-LD-000002




1.4.2 Further specific requirements

ANSI B16.20, ANSI B40.1, ANSI Z358.1

API 520, API 2000, API RP 520, API RP 521, API RP 526, API RP 527, API RP 551, API RP 598

ASHRAE - Fundamentals, HVAC Systems & Equipment and HVAC Applications (Sound & Vibration Control); ASHRAE 52, ASHRAE 55

ASME PTC 19.1, ASME PTC 19.5

ASTM: ASTM D3359, ASTM D4541, ASTM D4752

IEC 60044, IEC 60060, IEC 60099, IEC 60129, IEC 60137, IEC 60270, IEC 60358, IEC 60507, IEC 60529, IEC 60534-8-3, IEC 60584, IEC 60651, IEC 60751, IEC 60801-1/2/3, IEC 61000, IEC-61508-1/2/3/4/5/6/7, IEC 61850

IEEE-1159

ISA 75.11, ISA S 5.2, ISA S 5.3

ISO 2808, ISO 4287-1, ISO 5167, ISO 8502-3

ITU-R (All Series): "International Telecoms Union. Recommendations for Radio Systems"

ITU-T (All Series): "International Telecoms Union. Recommendations for Telecoms"

NFPA 10, NFPA 11, NFPA 14, NFPA 22, NFPA 55, NFPA 69, NFPA 80A, NFPA 221, NFPA 400, NFPA 704, NFPA 750, NFPA 2001

SSPC-PA2, SSPC-PA17, SSPC-PA Guide15, SSPC Paint 20, SSPC-SP11, SSPC-VIS1

TIA/EIA: "Telecommunication Industries Association / Electronic Industries Association"

Documents

24 3814 YZ LD 000002 IS01 List of Codes and Standrs