Upload
haliem
View
214
Download
1
Embed Size (px)
Citation preview
Serial Device Server
www.korenix.com 228
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
Redundant Ethernet
Management Security
PLC
RS232
JetPort Windows driver
Backup Path
Primary Path COM1
JetPort 5601
PLC
RS232
JetPort Windows driver
Backup Path Primary Path
COM1
JetPort 5601 JetPort 5601
RS232/422/485
Super Ring
JetNet 4508f JetNet 4508f
JetPort Windows driver
JetNet 4508f
Backup pathPrimary path
Redundant Dual Ethernet
COM1
PLC
Application 1: Provide a device end redundant link solution by connecting two Ethernet ports to the same switch with two separate uplinks or two switches with different links.
Internet
Secure Socket Layer
InternetExplorer
Netscape
HTTPSServer
HTTPServer
JetNet 5010G
Application 2: The Perfect network redundant solution for serial PLC devices by providing redundant uplinks which also connect to the Ethernet redundant network with the JetNet Super Ring technology.
HTTPS (Hypertext Transfer Protocol over Secure Socket Layer or HTTP over SSL) is a Web protocol, built into the browser that encrypts and decrypts user's page requests as well as the pages that are
returned by the Web server. It is a security protocol that provides communication privacy over the Internet. By adapting HTTPS technology, encrypted data
Application 1 Application 2
JetPort Series Industrial Secured Serial Device Server
The JetPort Serial Device Server Series is a smart RS-232 or RS-232/422/485 to Ethernet serial device server. It connects to the serial port devices such as card readers, measurement devices, or data acquisition terminals, over Ethernet, as if it were locally attached. The JetPort meets all customers’ requests such as redundant Ethernet management security, I/O and multi-link functions. The JetPort Commander, the JetPort Series free windows utility, provides user-friendly interfaces with auto device discovery in a LAN or adding devices on the public network.
www.korenix.com229
packets can be transmitted safely between the JetPort and the PC web browser, preventing unauthorized accesses.The SSH technology enables users to login in to remote host computers with security. It uses a client/server architecture to provide secure communications between two non-trusted ends. A SSH server can accepts or rejects incoming
connection attempts from local client ends via a secure authentication mechanism with data encryption. Users run SSH client programs (e.g. PuTTY) to issue requests to SSH servers. The JetPort supports the data cipher in DES-cbc (128-bit key) encryption and user authentication method by One Public Key + one Password.
JetPort Commander
Up to 5 simultaneous connectionsThe JetPor t ser ies prov ides you up to f ive simultaneous Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDP connections. All the services are developed over the TCP/IP protocol stacks. You can easily connect to the serial devices over Ethernet and develop your serial to Ethernet applications.
COM5
COM8
COM9
Digital display
POS terminalRS232
JetPort Windows driver
JetPort Windows driver
Ethernet
COM6
COM7
Card reader
Electronic meters
RS232
RS232
RS232
RS232
Application running on COM Port
COM Port driver
TCP/IPMedical measurement
Windows Virtual COMAfter installing JetPort Windows driver, the serial port on the JetPort can be accessed by the Windows as the virtual COM port. Users do not have to modify the existing program to upgrade the latency serial communications into serial over the IP application.
TCP / UDP SocketYou can also use TCP/UDP socket programs to control the JetPort’s serial port. The JetPort can be configured as TCP Server listening to TCP connection requests. It also can be configured as TCP Client actively requesting the TCP connection to send data, as well as UDP mode for multiple destination transmissions.
Ethernet
Data Server Console
Access Card ReaderRS232
RS232
JetPort - TCP ClientIP:192.168.10.11Destination IP:192.168.10.100 4040
JetPort - TCP ServerIP:192.168.10.10Listen Port:4000
TCP Request from Host
TCP Request from JetPort
IP:192.168.10.100Listen Port:4040
Easy-to-Use Windows Utility and Smart WizardsThe Korenix JetPort Commander is known for its abundant features, the user-friendly interface and the smart setup wizards. Customers can browse the JetPorts, configured services, monitor devices and the group setup.The group setup wizard includes Virtual COM Wizard, Group Setup Wizard, Group Firmware Wizard, Serial Tunnel Wizard and Group IP Wizard. Virtual COM Wizard: Three steps to configure all Virtual Com portsGroup Setup Wizard: Copy specific configurations from one to other devicesGroup Firmware Wizard: Group update firmware to multiple devicesSerial Tunnel Wizard: Couple devices to serial tunnelsGroup IP Wizard: Configure IP to multiple devices
Serial Device Server
www.korenix.com 230
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
Applications
POS
In order to improve the efficiency of the manufacturing lines of the factory, the control system company installed the Bar-Code System on each manufacturing l ine t rans fe r r ing the p roduc t da ta in to the management system. They chose the Korenix JetPort Series, the Industrial Secured Serial Device Server to enhance the Automation System of the product lines, including the JetPort 5601 and JetPort 5604.This application is adapted the network of TCP (Transmission Control Protocol – Remote Database) Server – TCP Client (Factory Manufacture Lines) with JetPort 5601 as well as through the network of the Virtual COM with JetPort 5604.
These methods have achieved the aim of Remote Management by transferring the Serial Data through the Ethernet to the database settled in the factory. The manufacturing data in other factories is transferred through the company dedicated lines with the set-up IP addresses between the Manufacture Lines and the Serial Device Server, i.e. assigning the certain JetPort devices to collect the data from certain Manufacture Lines.
Building an efficient and integrated management system
Main Products JetPort 5601 Industrial 1-port RS-232 Serial Device Server JetPort 5604 Industrial 4-port Redundant Serial Device ServerWhy Korenix Reliable - RTTD, Redundant to the Device JetPort 5604 series provide dual Ethernet ports. When the dual Ethernet ports are connected, only one path will be activated, this is known as Primary path. Convenience - JetPort 5604 series have four serial interfaces, and all of the interfaces can be configured with different serial interface types. Easy-to-use Windows Utility - JetPort Commander is known for its abundant features, user-friendly interface and smart setup wizards.
SMT line
DIP line
Ethernet
Database Server
JetPort 5601JetPort 5604
Serial
RS232
Switch
Mr. Allen Tsai
Powercon Control System
China
www.korenix.com231
Telecom
The biggest telecommunication company, who is the dominant player in the fixed-line market in Ukraine, provides the most comprehensive network services locally, including the construction of remote communication sites with phone stations whereequipments of serial interfaces and Ethernetcommunication channel are mostly implemented..Thei r par tner producer of phone stat ions –Shevchenko Factory (Kharkiv, Ukraine) faced the requirements of reliable system for remote sites monitoring and stations service through Ethernet network with less installation time and lower costs.
Hence JetPort 5604 was shortly chosen because of the redundant Ethernet path to ensure the nonstop data transmission and redundant power input as the possibility of power backup; Furthermore, the flexible 3-in-1, RS232/422/484 com port can be easily utilized for different serial interfaces at the remote phone stations. Besides the reliably designed hardware, the user-friendly software JetPort Commander made the originally complicated setup much easier for the operator to remotely manage and monitor the network status throughout the phone stations in the local area.
Building an efficient and integrated monitoring system
Main Products JetPort 5604 4-port RS232/422/485 Redundant Serial Device ServerWhy Korenix Reliable - RTTD, Redundant to the Device JetPort 5604 series provide dual Ethernet ports to ensure the nonstop network connection. Convenient - 3-in-1 RS232/422/485 in one com port which can be easily configured without interface changes. Easy-to-use Windows Utility - JetPort Commander is known for its abundant features, user-friendly interface and smart setup wizards.
CopperCopperCopper
Copper Copper Fiber 1GB
JetPort 5604
Hub
Hub
Router
Fiber ADSL 128KB Sync
CISCO 72 Series
Pavel Girak
SOLiTON
Ukraine
Serial Device Server
www.korenix.com 232
Korenix Industrial Product Selection Guide - Serial Device Server
Interface
Number of Ports:10/100Base-TX
Number of Ports: WLAN
Number of Ports:100Base-FX
(Multi Mode Fiber)
(Single Mode Fiber)
Power Jack
Fault Relay Output
1200VAC HIPOT
Mechanical
Rigid Aluminum Case
Dimensions (unit=mm)
Case Protection
Operating Temperature
DIN-Rail Kit
Protocols
Web-based Configuration
Windows Utility
Secured HTTPS,SSH
Super Ring, Couple Ring, Dual Homing
RTTD, Redundant Dual Ethernet
IGMP Snooping
Port VLAN
Quality of Service
SNMP V1/V2C
RMON1
SMTP(e-mail warning)
Syslog
Certifications
Regulatory Approvals:CE / FCC / UL
RoHS / WEEE
Number of Serial Ports
Power Terminal
IP 30
0~60oC
78.5(W)x29.2(H) x 79.6(D)
DC9~30V
1
1* RS232
JetPort 5201
Serial Server
96.1(W) x 29.6(H) x 99(D)
JetPort 5601f
IP 30
-10~70oC
DC9~30V
DC12~48V
1
JetPort 5601f-s
JetPort 5601f-m
1* RS232/422/485
Fiber Serial Server
IP 30
-10~70oC
DC9~30V
DC12~48V
2(Redundant)
1* RS232/422/485
JetPort 5601
Redundant Serial Server
IP 31
-10~70oC
145(W) x 46.5(H) x 120(D)
DC12~48V
DC12~48V
2(Redundant)
4*RS232/422/485
JetPort 5604
Redundant Serial Server
4 Digital Inputs 2 Digital Outputs
IP 31
-10~70oC
145(W) x 46.5(H) x 120(D)
DC12~48V
DC12~48V
JetPort 5604i
Isolation Redundant Serial Server
2(Redundant)
4 Digital Inputs 2 Digital Outputs
4*RS422/485 with 2KV Isolation
96.1(W) x 29.6(H) x 124(D)
IP 30
-10~55oC
DC12~48V
DC12~48V
1
1
1* RS232/ 422/485
JetPort 5801
Wireless Device Server
CE / FCC CE / FCC CE / FCC
www.korenix.com233
JetPort 5604 / 5604iThe First 4-port Redundant Serial Device Server
RTTD, Redundant to the DeviceThe JetPort 5604 series provides dual Ethernet ports. When the dual Ethernet ports are connected, only one path will be activated, known as Primary path, while the un-activated path will be the Backup path. When the primary path is down, the backup path will recover Ethernet connection in less than 200ms.
World’s First RTTD Technology
Inter-connect RTTD with Super RingThe JetPort 5604 RTTD technology works well with the JetNet 4000/5000 series Super Ring technology, which provides users the complete redundant solution from network infrastructure to the serial devices.
1 2
Ethernet
1 2
Ethernet
1 2
Ethernet
1 2
Ethernet
Only Ethernet 1 is linked
Only Ethernet 2 is linked
Ethernet port 1 is primary path, port 2 is backup path
Ethernet port 1 is backup path, port 2 is primary path
Automatic recovery
Backup Path(Un-Activated)
Primary Path(Activated)
Event warningwhen link failure
JetPort Commander
Activated: Light Green
Un-Activated: Dark Green
JetPort 5604RS232/422/485
Rapid Super Ring
- Ring Redundancy
JetPort Windows driver
JetNet 5010G
Backup pathPrimary path RTTD-Device Redundancy
PLC1 2
Ethernet
VC
OM
Rapid S
uper Ring R
TTD S
erial
Four Serial Interfaces Can Be Configured for Different Mode
The JetPort 5604 series have four serial interfaces, which can be configured with different serial interface types, such as RS232, RS422, 2-wire RS485 or 4-wire RS485. Each of the ports also can be configured with different service modes.
You can configure serial port 1 to the Virtual COM mode, serial port 2 to the TCP server, serial port 3 to the TCP client and serial port 4 to the UDP mode. All of the serial ports have their own settings and can operate well at the same time.
Serial Device Server
www.korenix.com 234
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
Up to 5 Simultaneous ConnectionsThe JetPort series provides you up to 5 simultaneous Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDP connections. All the services are developed
over the TCP/IP protocol stacks. You can easily connect to the serial devices over Ethernet and develop your serial to Ethernet applications.
JetPort Commander
DI1 DI2 DI3 DI4 DIG DO1 DO2 DOG
DI/DO Pin Assignment
010101 0101010101
DO DI
DI_4 DI_3 DI_2 DI_1 DI
1 1 1 1
DO DO_2 DO_1
0 0
DO DO_1 DO_2
1 0
Get status from remote DO
Get or Set
Value to the
DO
5V TTL
1: 2-5VDC
0: 0-0.8VDC
getdi
1:1:1:1
getdo
1:1
setdo 1:0
OK.
getdo
1:0
Telnet / TCP Program
GetDO GetDI SetDO
5V/TTL Digital Input and Digital OutputThe JetPort 5604 series provides four digital inputs and two digital outputs. It allows users to connect the termination units’ 5V TTL digital input/output. The JetPort Commander allows you to monitor the status of the DI and DO, and to assign the value of 0 or 1 to DO. The JetPort also provides one data port for users to program DI/O "get" and "set" commands figure on the right. The logic Low (Value=0) power voltage is 0-0.8V as the maximum. The logic High (Value =1) power voltage is as the minimum 2-5V. The JetPort also opens one TCP socket port for DI/DO programming commands.
TCP/UDP SocketYou can also use TCP/UDP socket programs to control the JetPort’s serial port. The JetPort can be configured as TCP Server, listening to TCP connection request, or as TCP Client actively requesting TCP connection to send data, or as UDP mode for multiple destination transmission.
TCP Client192.168.10.100
TCP requestFrom host
TCP Server mode192.168.10.101
TCP Mode: Request connection from TCP Client to TCP Server.
TCP Tunnel: Auto transmissionwithout VCOM Driver.
TCP TunnelAuto transmission
TCP Client mode192.168.10.102
TCP requestFrom JetPort
TCP Server192.168.10.104
Windows Virtual COMAfter installing JetPort Windows driver, the serial port on the JetPort can be accessed by the Windows as the virtual COM port. Users do not have to modify the existing program to upgrade the legacy serial communications into serial over IP applications.
Use one IP address to control multiple serial devices over the TCP/IP.
JetPort 5604192.168.10.2
JetPort Commander
VCOM 5: 192.168.10.2VCOM 6: 192.168.10.2VCOM 7: 192.168.10.2VCOM 8: 192.168.10.2
Application
VCOM
TCP/IP
Device Server
Serial Device
www.korenix.com235
Easy-to-Use Windows Utility and Smart Wizards
IP 1
IP 2
IP 3
IP 1~IP 3
Group IP Wizard: 3 steps to assign IP addresses.
Select target devices
Define theIP range Apply & Done
GroupIP assigned
JetPort 5604 JetPort 5601 JetPort 5201
The Korenix JetPort Commander is known for its abundant features, the user-friendly interface and the smart setup wizards. Customers can browse the JetPorts, configured services, monitor devices and group setup.The group setup wizard includes Virtual COM Wizard, Group Setup Wizard, Group Firmware Wizard, Serial Tunnel Wizard and Group IP Wizard. Virtual COM Wizard: Three steps to configure all Virtual Com portsGroup Setup Wizard: Copy specific configurations from one to other devicesGroup Firmware Wizard: Group update firmware to multiple device(s)Serial Tunnel Wizard: Couple devices to serial tunnelsGroup IP Wizard: Configure IP to multiple device(s)
Digital Input/Output4 DI and 2 DO, 5V TTL
LEDs Power and Serial Status
Serial Connectors4 RS-232/422/485 DB915 KV ESD protection110 bps to 460.8 Kbps
Long Distance RS422/485 120ohm Termination
No
1 2
Din Rail Mounting
Dual Ethernet PortsRJ-45 10/100MbpsRedundancy < 200msAuto MDI/MDIX
Reset Button
Dual Power Input12-48VDC Terminal Block / Power Jack
Din 35(35mm)
( V+ V- )
PWR1 PWR2
JetPort 5604 Appearance
Digital Input/Output4 DI and 2 DO, 5V TTL
LEDs Power and Serial Status
Serial Connectors4 RS-422/485 Terminal Block2KV Isolation protection110 bps to 460.8 Kbps
Long Distance RS422/485 120ohm Termination
No
1 2
Din Rail Mounting
Dual Ethernet PortsRJ-45 10/100MbpsRedundancy < 200msAuto MDI/MDIX
Reset Button
Dual Power Input12-48VDC Terminal Block / Power Jack
Din 35(35mm)
( V+ V- )
PWR1 PWR2
JetPort 5604i Appearance
Serial Device Server
www.korenix.com 236
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
1 2 3 4 5
6 7 8 9
Pin # RS232 RS422 RS485 (4 wire) RS485(2 wire)
1
2
3
4
5
6
7
8
9
DCD
RXD
TXD
DTR
GND
CTS
DSR
RTS
RI
RXD-
RXD+
TXD+
TXD-
GND
RXD-
RXD+
TXD+
TXD-
GND
DATA+
DATA-
GND
RS232 mode act as DTE
JetPort 5604 JetPort 5604i
Flexible Installation
1. Desktop
2. Wall Mount
3. DIN-Rail Mount
+
Wall Mount Plate
Foot pad
Korenix JetPort 5604 series have flexible mechanical
designs. These can help users to install JetPort 5604 in
different environments. With the vertical Din-Rail Mount, the
JetPort 5604 series provide IP31 protection.
IP31 Water proof
Front LEDsEasy Diagnostic
Front ConnectorsEasy Installation
Din 35(35mm)
Pin Assignment
www.korenix.com237
The JetPort 5604 series is a 4-port Redundant Serial Device Server. The JetPort 5604 provides four 3-in-1 RS232/422/485 serial interfaces. Users can use one IP address and Redundant Ethernet paths (RTTD Technology) to control 4 serial devices as max. over the Ethernet. To configure the JetPort Commander,
users can operate through the Windows utility or choose HTTPS/SSH for secured management.The JetPort 5604 series is also equipped with two types of power inputs, four 5V TTL Digital Inputs and two Digital Outputs. These are value-added features for users to construct the field installations.
4-ports RS-232/422/485 to redundant EthernetRTTD, Redundant to the Device function Dual Ethernet ports, network auto-recovery in Less Than 200msFour Digital Inputs and Two Digital OutputsRedundant Power Inputs by 12-48VDC Terminal Block and DC JackIndependent serial services, Virtual COM, TCP Server/Client/Tunnel and UDP ConnectionsJetPort Commander, Easy-to-use Windows Utility with smart setup WizardsSecured Management by HTTPS and SSHEvent Notification by Syslog, Email, SNMP trap and Digital OutputVertical mounting by DIN Rail, Wall mount/Desk-top
JetPort 5604Industrial 4-port Redundant Serial Device Server
Overview
5604Serial Device Server
Dimensions
RoHS
Serial Device Server
www.korenix.com 238
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
Network InterfaceEthernet: 2* 10/100BaseTX, Redundant Dual EthernetConnector: RJ-45, Auto MDI/MDI-XFeature: Auto Recovery in less than 200msProtection: Built-in 1.5 KV magnetic isolation protectionProtocols: IP, TCP, UDP, ICMP, DHCP, BootP, ARP/RARP, SNMP, HTTPS, SSH, SNTP, SMTPSerial CommunicationNumber of Ports: 4Interface: RS-232/RS422, 2/4-wire RS485Connectors: male DB9 Baud Rates: 110 bps to 460.8K bpsData Bits: 5, 6, 7, 8Parity: odd, even, noneStop Bits: 1, 1.5, 2RS-232: TxD, RxD, RTS, CTS, DTR, DSR, GND, DCDRS-422: Tx+,Tx-, Rx+, Rx-,GNDRS-485 (4-wire): Tx+,Tx-, Rx+, Rx-,GNDRS-485 (2-wire): Data+, Data-,GNDFlow Control: XON/XOFF, RTS/CTS, DTR/DSRSerial Line Protection: 15KV ESDLong Distance Termination: 2*pin 120ohm DIP switchesDigital Input/OutputNumber of DI: 4Power Input voltage: 5V/TTLLogic 0: 0.8V max (0-0.8V)Logic 1: 2.0V min (2-5V)Number of DO: 2Power Output voltage5V/TTLLogic 0: 0.8V max (0-0.8V)Logic 1: 2.0V min (2-5V)FeaturesLED: Power 1/Power 2: Startup(Red); Ready(Green)Ethernet port: Left:100M Link (Green On)/Activity(Green Blinking)Right:10M Link (Orange On)/Activity(Orange Blinking)Serial 1/2/3/4:TX only(Green), RX only(Red), Both RX/TX(Orange)Configuration: Windows Utility-JetPort Commander, HTTPS, SSHSerial Service: Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDPReset: Software reload default, Hardware reset button
Beeper: Embedded beeper for positioningRTTD: Redundant to the Device, Auto-recover in less than 200msSNTP: For time managementAccess IP Table: 16 IP addresses to prevent illegal usersMonitor: Devices’ status, VCOM statusSNMP: RFC1213 MIB II, RFC1317 RS232_like and SNMP TrapE-Mail Alert: Automatic e-mail warning by pre-defined eventsSystem Log: Trap to Syslog server or local displaySystem Events: Cold/Warm Start, Login Failed, IP and Password Changed, Access IP Blocked, DI/DO changed, Serial Port DCD/RI/DSR/CTS changed, Serial Port connected/disconnected.Windows UtilityJetPort Commander: Device Discovery, Auto IP, Network Setting, Device and Serial Port Setting and monitoring, Notification setting, Firmware Upgrade, Configuration Backup and Restore, Group Configuration Wizards.Serial Service Mode: Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDPAdvanced Serial Setting: TCP Alive Check Timeout, Inactivity Idle Timeout, Performance mode, Delimiter, Force TX Timeout for Data Packing and Force TX interval timeGroup Configuration Wizard: JetPort Commander: Group IP Wizard, Group firmware upgrade, Group Backup/Restore, VCOM and TCP Tunnel Setup WizardPower RequirementsSystem Power:PWR1: 12~48VDC Terminal BlockPWR2: 12~48VDC Power Jack with Power AdapterPower Line protection:1 KV Burst (EFT), EN61000-4-40.5 KV Surge, EN61000-4-5Power Consumption: Maximum 4.3 WattsMechanicalDimensions: 145mm(W)x46.5mm(H)x120mm(D)Regulatory Approvals: FCC Class A,CE Class A,UL,RoHSEnvironmentalOperating Temperature: -10 ~ 70OCOperating Humidity: 5% ~ 95%, (non-condensing)Storage Temperature: -40 ~ 85OCWarranty: 5 years
JetPort 5604 Industrial 4-port RS-232/422/485 Redundant Serial Device Server
Includes:
4-port RS-232/RS422/RS485 Redundant Serial Device Server
Quick Installation Guide
100-240VAC power adapte
Din-Rail kit and foot pads
Documentation and Software CD-ROM
Specification
Ordering Information
www.korenix.com239
The JetPort 5604i series is a 4-port Isolation Redundant Serial Device Server. Users can use one IP address, Redundant Ethernet paths (RTTD Technology) to control 4 serial devices as mas. over the Ethernet. To configure JetPort Commander, users can operate through the Windows utility or choose HTTPS/SSH for secured management.
The JetPort 5604i series is also equipped with two types of power inputs, four 5V TTL Digital Inputs and two Digital Outputs. The JetPort 5604i especially provides the 2KV isolation protection for the critical industrial environments. These are value-added features for users to construct the field installations.
4-ports RS-422/485 with isolation to redundant EthernetSupports 2KV isolation protection RTTD, Redundant to the Device function Dual Ethernet ports, network auto-recovery in Less Than 200msFour Digital Inputs and Two Digital OutputsRedundant Power Inputs by 12-48VDC Terminal Block and DC JackIndependent serial services, Virtual COM, TCP Server/Client/Tunnel and UDP ConnectionsJetPort Commander, Easy-to-use Windows Utility with smart setup Wizards.Secured Management by HTTPS and SSHEvent Notification by Syslog, Email, SNMP trap and Digital OutputVertical mounting by DIN Rail, Wall mount/Desk-top
5604iSerial Device Server
Industrial 4-port Isolation Redundant Serial Device ServerJetPort 5604i
Overview
Dimensions
RoHS
Serial Device Server
www.korenix.com 240
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
Reset: Software reload default, Hardware reset buttonBeeper: Embedded beeper for positioningRTTD: Redundant to the Device, Auto-recover in less than 200msSNTP: For time managementAccess IP Table: 16 IP addresses to prevent illegal usersMonitor: Devices’ status, VCOM statusSNMP: RFC1213 MIB II, RFC1317 RS232_like and SNMP TrapE-Mail Alert: Automatic e-mail warning by pre-defined eventsSystem Log: Trap to Syslog server or local displaySystem Events: Cold/Warm Start, Login Failed, IP and Password Changed, Access IP Blocked, DI/DO changed, Serial Port DCD/RI/DSR/CTS changed, Serial Port connected/disconnected.Windows UtilityJetPort Commander: Device Discovery, Auto IP, Network Setting, Device and Serial Port Setting and monitoring, Notification setting, Firmware Upgrade, Configuration Backup and Restore, Group Configuration Wizards.Serial Service Mode: Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDPAdvanced Serial Setting: TCP Alive Check Timeout, Inactivity Idle Timeout, Performance mode, Delimiter, Force TX Timeout for Data Packing and Force TX interval timeGroup Configuration Wizard: JetPort Commander: Group IP Wizard, Group firmware upgrade, Group Backup/Restore, VCOM and TCP Tunnel Setup WizardPower RequirementsSystem Power:PWR1: 12~48VDC Terminal BlockPWR2: 12~48VDC Power Jack with Power AdapterPower Line protection:1 KV Burst (EFT), EN61000-4-40.5 KV Surge, EN61000-4-5Power Consumption: Maximum 4.7 WattsMechanicalDimensions: 145mm(W)x46.5mm(H)x120mm(D)Regulatory Approvals: FCC Class A, CE Class A , UL, RoHSEnvironmentalOperating Temperature: -10 ~ 70OCOperating Humidity: 5% ~ 95%, (non-condensing)Storage Temperature: -40 ~ 85OCWarranty: 5 years
Network InterfaceEthernet: 2* 10/100BaseTX, Redundant Dual EthernetConnector: RJ-45, Auto MDI/MDI-XFeature: Auto Recovery in less than 200msProtection: Built-in 1.5 KV magnetic isolation protectionProtocols: IP, TCP, UDP, ICMP, DHCP, BootP, ARP/RARP, SNMP, HTTPS, SSH, SNTP, SMTPSerial CommunicationNumber of Ports: 4Interface: RS-422, 2/4-wire RS485 Connectors: 5-pin Terminal Block Baud Rates: 110 bps to 460.8K bpsData Bits: 5, 6, 7, 8Parity: odd, even, noneStop Bits: 1, 1.5, 2RS-422: Tx+,Tx-, Rx+, Rx-,GNDRS-485 (4-wire): Tx+,Tx-, Rx+, Rx-,GNDRS-485 (2-wire): Data+, Data-,GNDFlow Control: XON/XOFF, RTS/CTS, DTR/DSRSerial Line Protection: 15KV ESDLong Distance Termination: 2*pin 120ohm DIP switchesIsolationSerial Line Isolation: 2KVProtection Types: Port to Port, Port to Power/GND/CaseDigital Input/OutputNumber of DI: 4Power Input voltage: 5V/TTLLogic 0: 0.8V max (0-0.8V)Logic 1: 2.0V min (2-5V)Number of DO: 2Power Output voltage5V/TTLLogic 0: 0.8V max (0-0.8V)Logic 1: 2.0V min (2-5V)FeaturesLED: Power 1/Power 2: Startup(Red); Ready(Green)Ethernet port: Left:100M Link (Green On)/Activity(Green Blinking)Right:10M Link (Orange On)/Activity(Orange Blinking)Serial 1/2/3/4:TX only(Green), RX only(Red), Both RX/TX(Orange)Configuration: Windows Utility-JetPort Commander, HTTPS, SSHSerial Service: Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDP
JetPort 5604i: Industrial Industrial 4-port RS-422/485 with Isolation Redundant Serial Device Server
Includes:
4-port RS-422/RS485 with isolation Redundant Serial Device Server
Quick Installation Guide
100-240VAC power adapter
Din-Rail kit and foot pads
Documentation and Software CD-ROM
Specification
Ordering Information
www.korenix.com241
RoHS
RTTD, Redundant to the Device. Dual Ethernet ports, network auto-recovery in Less Than 200msOne port software selectable RS232/422/485 serial interface, Max. Serial Speed: 460.8kbpsSecured Management by HTTPS and SSH Dual Power Inputs by 12~48VDC Terminal Block and and 9~30V DC Jack JetPort Commander, Easy-to-use Windows Utility for Device Discovery, Multiple Device Managing and MonitoringVersatile Serial Services: Virtual Com, Serial Tunnel,TCP Server, TCPClient, UDPUp to 5 Simultaneous Serial Connections Event Warning by Syslog, Email, SNMP trap, and Beeper Virtual COM Driver for Windows 2000/XP/2003/Vista
The JetPort 5601 is a RS-232/422/485 to Redundant Ethernet Serial Device Server. The serial interface is configurable in software and supports speed as fast as 460.8kbps. The Redundant Dual Ethernet ports can auto-recover in less than 200ms if the master link fails, to guarantee a non-stop connection. The JetPort 5601 can be configured by the JetPort Commander, an easy-to-use utility for Windows, that covers all management, monitoring, and control functions forone or many JetPort servers.
In addition to the Windows configuration, the JetPort can be configured by HTTPS and SSH, giving administrators the flexibility and security for device management. Furthermore, there are up to 5 multi-link as Virtual COM or TCP/UDP connections. JetPort 5601 is equipped with two types of power input, terminal block or power jack. The JetPort 5601 can be wall mounted or din-rail mounted with the din-rail kit.
1-port RS-232/422/485 Redundant Serial Device ServerJetPort 5601
Overview
The JetPort 5601 provides dual Ethernet ports. When dual Ethernet ports are connected, only one of the paths, the primary path, is activated, the other is backup path. When the primary path is down, the backup path will recover Ethernet connection in less than 200ms.
RTTD, Redundant to The DeviceThe JetPort RTTD technology also works well with the JetNet 4000/5000 series Super Ring technology, which provides users the complete redundant solution from network infrastructure to the serial devices.
Serial Device Server
www.korenix.com 242
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
The JetPort 5601 serial port supports RS-232/422, 2/4 wire RS485 and is configurable by software. The serial speed can be set as fast as 460.8kbps for RS232, RS422, and RS485. The serial port can work in various communication modes, including virtual com, TCP server, TCP client, UDP, and serial tunnel. Advanced settings for controlling the data
communications, such as TCP alive check, delimiter, and timeout, are also supported. For industrial redundant solutions, the JetPort supports to 5 simultaneous connections as maximun for virtual com, TCP server, TCP client modes, sending data to 5 hosts simultaneously.
The HTTPS is a security protocol that provides communication privacy over the Internet . The SSH allows users to securely login to the remote JetPort
device servers and provides encrypted and authenticated communications between the JetPort and administrator computers.
The Korenix JetPort Commander is known for its abundant features, the user-friendly interface and the smart setup wizards. Customer can browse the JetPorts, configured services, monitor devices and
group setup. The group setup wizard includes Virtual COM Wizard, Group Setup Wizard, Group Firmware Wizard, Serial Tunnel Wizard and Group IP Wizard.
Reset RS232/422/485Long RangeTermination
(V+ V- )
5601
PWR1
PWR2
Eth1
Eth2
Serial
Eth2 Eth1 PWR2 PWR1
Serial Device Server
LEDPWR1, PWR2, Eth1, Eth2, Serial TX/RX
Redundant Dual 10/100M Ethernet
Mounting Ear
Long Distance RS422/485 120ohm Termination
1 RS-232/422/485 DB9 Serial Connector
H/W Reset ButtonNo
1 2
PWR 1: Terminal Block, 12-48VDCPWR 2: Power Jack, 9~30 VDC
( V+ V- )PWR1 PWR2
DimensionsJetPort 5601 Appearance
RS-232 / 422 / 485 3-in-1 Serial Configuration
Secured Management by HTTPS and SSH
JetPort Commander, Easy to Use Windows Utility
www.korenix.com243
System Log: Trap to Syslog server or local displaySystem Events:Cold/Warm Start, Login Failed, IP and Password Changed, Access IP Blocked, Serial Port DCD/RI/DSR/CTS changed, Serial Port connected/disconnected.Windows UtilityJetPort Commander:Device Discovery, Auto IP, Network Setting, Device and Serial Port Setting and monitoring, Notification setting, Firmware Upgrade, Configuration Backup and Restore, Group Configuration Wizards.Serial Service Mode:Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDPAdvanced Serial Setting:TCP Alive Check Timeout, Inactivity Idle Timeout, Performance mode, Delimiter, Force TX Timeout for Data Packing and Force TX interval timeGroup Configuration Wizard:JetPort Commander: Group IP Wizard, Group firmware upgrade, Group Backup/Restore, VCOM and TCP Tunnel Setup WizardPower RequirementsSystem Power:PWR1: 12~48VDC Terminal BlockPWR2: 9~30VDC Power Jack with Power AdapterPower Line protection:1 KV Burst (EFT), EN61000-4-40.5 KV Surge, EN61000-4-5Power Consumption: Maximum 3.7 WattsMechanicalDimensions: 96.1mm(W)x99mm(D)x29.6mm(H)Regulatory Approvals: FCC Class A, CE Class A , UL, RoHSEnvironmentalOperating Temperature: -10 ~ 70OCOperating Humidity: 5% ~ 95%, (non-condensing)Storage Temperature: -40 ~ 85OCWarranty: 5 years
Network InterfaceEthernet: 2* 10/100BaseTX, Redundant Dual EthernetConnector: RJ-45 Auto MDI/MDI-XFeature: Auto Recovery in less than 200msProtection: Built-in 1.5 KV magnetic isolation protectionProtocols: IP, TCP, UDP, ICMP, DHCP, BootP, ARP/RARP, Telnet, SNMP, HTTP, SNTP, SMTPSerial CommunicationNumber of Ports: 1Interface: RS-232/422, 2/4-wire RS485Connectors: Male DB9Baud Rates: 110 bps to 460.8K bpsData Bits: 5, 6, 7, 8Parity: odd, even, noneStop Bits: 1, 1.5, 2RS-232: TxD, RxD, RTS, CTS, DTR, DSR, GND, DCDRS-422: Tx+,Tx-, Rx+, Rx-,GNDRS-485 (4-wire): Tx+,Tx-, Rx+, Rx-,GNDRS-485 (2-wire): Data+, Data-,GNDFlow Control: XON/XOFF, RTS/CTS, DTR/DSRSerial Line Protection:15KV ESDLong Distance Termination: 2*pin 120ohm DIP switchesFeaturesLED:Power 1/Power 2: Startup(Red); Ready(Green)Ethernet 1/Ethernet 2 : 10M Link(Orange), 100M Link(Green)Serial: Transmitting data(Green), Receiving data(Orange)Configuration: Windows Utility-JetPort Commander, HTTP, TelnetSerial Service: Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDPReset: Software reload default, Hardware reset buttonSNTP: For time managementAccess IP Table: 16 IP addresses to prevent illegal usersMonitor: Devices’ status, VCOM statusSNMP: RFC1213 MIB II, RFC1317 RS232_like and SNMP TrapE-Mail Alert: Automatic e-mail warning by pre-defined events
Specification
JetPort 5601 1-port RS-232/RS422/RS485 Redundant Serial Device Server
Includes:
1-port RS-232/RS422/RS485 Redundant Serial Device Server
Quick Installation Guide
100V - 240V power adapter
Din-Rail kit and foot pads
Documentation and Software CD-ROM
Ordering Information
Serial Device Server
www.korenix.com 244
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
RoHS
The JetPort 5601f is a RS-232/422/485 to Fiber Ethernet serial server. The serial interface is configurable in software and supports speed as fast as 460.8kbps. The fiber port supports one multi-mode fiber SC port, with max. 2KM communication distance, or single-mode fiber SC port, with max. 30KM distance. The JetPort 5601f can be configured by the JetPort Commander, an easy-to-use utility for Windows, that covers all management, monitoring, and control functions for one or multiple JetPort
servers. In addition to Windows configuration, the JetPort can be configured by HTTPS and SSH, giving administrators the flexibility and security for device management. Furthermore, there are up to 5 multi-link Virtual COM or TCP/UDP connections. JetPort 5601f is equipped with two types of power input, terminal block or power jack. The JetPort 5601 can be wall mounted or din-rail mounted by the din-rail kit.
One-port RS-232/422/485 to Fiber Ethernet Solution One Multi-mode or Single-mode Fiber Port, maximum 2KM or 30KM distanceMax. Serial Speed: 460.8kbpsSecured Management by HTTPS and SSHDual Power Input by 12~48VDC Terminal Block and 9~30VDC Power JackJetPort Commander, Korenix Windows Utility for Device Discovery, Multiple Device Setting and Monitoring.Versatile Serial Modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDPUp to 5 Simultaneous Serial ConnectionsEvent Warning by Syslog, Email, SNMP trapEmbedded beeper for positioning Virtual COM Driver for Windows 2000/XP/2003/Vista
1-port RS-232/422/485 Fiber Serial Device ServerJetPort 5601f
Overview
The fiber Ethernet allows higher communication bandwidth and provides total immunity against EMI/RFI interferences and increased security. In addition, the Fiber serial server can be used without risk in hazardous applications without EMC emission,
Fiber Optic for Hazardous Applications and Long Distanceground loops, immunity against lightning and high voltage environments. For long distance applications, the single-mode fiber supports 30KM transmission distance and multi-mode 2KM.
www.korenix.com245
The JetPort 5601 serial port supports RS232, RS422, 2/4 wire RS485 and is configurable by software. The serial speed can be set as fast as 460.8kbps for RS232, RS422, and RS485. The serial port can work in various communication modes, including virtual com, TCP server, TCP client, UDP, and serial tunnel. Advanced settings for controlling the
data communications such as TCP alive check, delimiter, and timeout are also supported. For industrial redundant solutions, the JetPort supports to maximum 5 simultaneous connections for virtual com, TCP server, TCP client modes, and sending data to 5 hosts simultaneously.
The HTTPS is a security protocol that provides communication privacy over the Internet . The SSH allows users to securely login to the remote JetPort
device servers and provides encrypted and authenticated communications between the JetPort and administrator computers.
The Korenix JetPort Commander is known for its abundant features, the user-friendly interface and the smart setup wizards. Customers can browse the JetPorts, configured services, monitor devices and
group setup. The group setup wizard includes Virtual COM Wizard, Group Setup Wizard, Group Firmware Wizard, Serial Tunnel Wizard and Group IP Wizard.
5601f
(V+ V- )
PWR1
PWR2
Fiber
Serial
RX TX PWR1 PWR2
Serial Device Server
Reset RS232/422/485Long RangeTermination
LEDPWR1, PWR2, Eth1, Eth2, Serial TX/RX
Mounting Ear
Long Distance RS422/485 120ohm Termination
1 RS-232/422/485 DB9 Serial Connector
H/W Reset Button
100Base-FXMulti-/Single-modeSC Fiber Connector
No
1 2
PWR 1: Terminal Block, 12-48VDCPWR 2: Power Jack, 9~30 VDC
( V+ V- )PWR1 PWR2
DimensionsJetPort 5601f Appearance
RS-232 / 422 / 485 3-in-1 Serial Configuration
Secured Management by HTTPS and SSH
JetPort Commander, Easy to Use Windows Utility
Serial Device Server
www.korenix.com 246
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
Serial Service: Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDPReset: Software reload default, Hardware reset buttonSNTP: For time managementAccess IP Table: 16 IP addresses to prevent illegal usersMonitor: Devices’ status, VCOM statusSNMP: RFC1213 MIB II, RFC1317 RS232_like and SNMP TrapE-Mail Alert: Automatic e-mail warning by pre-defined eventsSystem Log: Trap to Syslog server or local displaySystem Events: Cold/Warm Start, Login Failed, IP and Password Changed, Access IP Blocked, Serial Port DCD/RI/DSR/CTS changed, Serial Port connected/disconnected.Windows UtilityJetPort Commander: Device Discovery, Auto IP, Network Setting, Device and Serial Port Setting and monitoring, Notification setting, Firmware Upgrade, Configuration Backup and Restore, Group Configuration Wizards.Serial Service Mode: Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDPAdvanced Serial Setting: TCP Alive Check Timeout, Inactivity Idle Timeout, Performance mode, Delimiter, Force TX Timeout for Data Packing and Force TX interval timeGroup Configuration Wizard: JetPort Commander: Group IP Wizard, Group firmware upgrade, Group Backup/Restore, VCOM and TCP Tunnel Setup WizardPower RequirementsSystem Power:PWR1: 12~48VDC Terminal BlockPWR2: 9~30VDC Power Jack with Power AdapterPower Line protection: 1 KV Burst (EFT), EN61000-4-40.5 KV Surge, EN61000-4-5Power Consumption: Maximum 3.7 WattsMechanicalDimensions: 96.1mm(W)x99mm(D)x29.6mm(H)Regulatory Approvals: FCC Class A, CE Class A , UL,RoHSEnvironmentalOperating Temperature: -10 ~ 70OCOperating Humidity: 5% ~ 95%, (non-condensing)Storage Temperature: -40 ~ 85OCWarranty: 5 years
Network InterfaceEthernet: 100BaseFXConnector: 100BaseFX: Duplex SCCables: Multi-mode fiber: 50/125um or 62.5/125um, max. distance 2KM Single-mode fiber: 8/125um, 9/125um or 10/125 um, max. distance 30KMFiber Transceiver:JetPort 5601f-m, Multi-mode: 2KM max. distance Wave-length: 1310nm Min Tx Power:-19dBm Max Tx Power:-14dBm Min Rx Sensitivity:-30dBm Link budget:11dBm JetPort 5601f-s, Single-mode: 30KM max. distance Wave-length:1310nm Max Tx Power:-8dBm Min Tx Power:-15dBm Min Rx Sensitivity:-34dBm Link budget:19dBmProtocols: IP, TCP, UDP, ICMP, DHCP, BootP, ARP/RARP, SNMP, HTTPS, SSH, SNTP, SMTPSerial CommunicationNumber of Ports: 1Interface: RS-232, RS422, 2/4-wire RS485Connectors: Male DB9Baud Rates: 110 bps to 460.8K bpsData Bits: 5, 6, 7, 8Parity: odd, even, noneStop Bits: 1, 1.5, 2RS-232: TxD, RxD, RTS, CTS, DTR, DSR, GND, DCDRS-422: Tx+,Tx-, Rx+, Rx-,GNDRS-485 (4-wire): Tx+,Tx-, Rx+, Rx-,GNDRS-485 (2-wire): Data+, Data-,GNDFlow Control: XON/XOFF, RTS/CTS, DTR/DSRSerial Line Protection:15KV ESDLong Distance Termination: 2*pin 120ohm DIP switchesFeaturesLED: Power 1/Power 2: Startup(Red); Ready(Green)Ethernet 1/Ethernet 2 : 10M Link(Orange), 100M Link(Green)Serial: Transmitting data(Green), Receiving data(Orange)Configuration: Windows Utility-JetPort Commander, HTTPS, SSH
JetPort 5601f -m 1-port RS-232/RS422/RS485 Fiber
Serial Device Server,multi-mode/2KM
Includes:
1-port RS-232/RS422/RS485 Fiber Serial Device
Server One Fiber Port,multi-mode
Quick Installation Guide
Documentation and Software CD-ROM
Din-Rail kit and foot pads
100V - 240V power adapter
JetPort 5601f -s 1-port RS-232/RS422/RS485 Fiber
Serial Device Server, single-mode/30KM
Includes:
1-port RS-232/RS422/RS485 Fiber Serial Device
Server One Fiber Port,single-mode
Quick Installation Guide
Documentation and Software CD-ROM
Din-Rail kit and foot pads
100V - 240V power adapter
Specification
Ordering Information
www.korenix.com247
JetPort 58011-port RS-232/422/485 Wireless Serial Device Server
The JetPort 5801 is an one port RS-232/422/485 to Wireless Serial Device Server. The Wireless LAN solution is 802.11b/g with up to 54Mbps, which can give you an easy way and high bandwidth connection to the hard-to-wire serial devices, ease your network cabling problem in the field. Protect your serial data transmission with 128 bit WEP and WPA over the Wireless LAN and avoid the unauthorized
access or hack. The JetPort 5801 can be configured by the JetPort Commander, users can manage the wired and wireless JetPort without installing additional software. The JetPort 5801 is equipped with two types of power input, terminal block or power jack. The JetPort 5801 can be wall mounted or din-rail mounted by the din-rail kit.
One-port RS-232/422/485 to 802.11b/g (up to 54Mbps) Wireless networkEncrypted data transmission with 128-bit WEP and WPAExternal antenna can expand the range of WLANDual Power Input by 12~48VDC Terminal Block and Power JackJetPort Commander, Windows Utility for Device Discovery, Multiple Device Setting and MonitoringVersatile Serial Application: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDPEmbedded beeper for positioningVirtual COM Driver for Windows 2000/XP/2003/Vista
RoHS
Overview
In industrial networking, administrators often encounter wiring problem with serial devices. The JetPort 5801 wireless device server is designed to connect the hard-to-wire serial devices. A moving network object, such as it is in the bus, does not always stay at a fixed location; thus, wiring the bus to headquarter is simply impossible. The Korenix JetPort 5801 is a manageable port and secured wireless for applications where wired networking is ineligible. The JetPort 5801 chooses the 802.11b/g solution for the Wireless LAN connection. The speed of the WLAN is up to 54Mbps, and the external antenna can be expanded the range of Wireless LAN.
Public Server/Administrator
802.11 b/g Wireless LAN
Ease Cabling by 802.11b/g Wireless LAN
Serial Device Server
www.korenix.com 248
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
For most wireless products, users need to install additional tools to configure the settings, monitor the status, mapping the VCOM, TCP/UDP modes. With the JetPort Commander, you don’t need the additional tool, you can broadcast search the JetPort 5801, browsing available AP, configuring SSID, monitoring link quality and status…etc. You can also easily group manage the Korenix’s wired and wireless JetPort serial device servers at the same time.
JetPort Commander Compatibility
802.11 b/g Wireless LAN
LAN (Local Aarea Network)
JetPort Commander
JetPort 5604Series
JetPort 5201JetPort 5601
AP
TCP/UDP
Virtual COM
Wired LAN is protected by the physical media for their infrastructure, the unauthorized access can be easily identified. Wireless LAN, which is over radio waves, does not have the same physical media protection and is difficult to avoid the illegal access. Wired Equivalent Privacy(WEP), is designed to provide the same level of security as that of a wired LAN. WEP aims to provide security by encrypting data over radio waves so that the serial data is protected from JetPort 5801 to the Access Point (AP) or another end station.
Encrypted Data Transmission with 128-bit WEP
Serial Data Encrypted by WEP Ethernet Data
802.11 b/g Wireless LAN
Dimensions(V+ V- )
WLAN LAN PWR2 PWR1
5801
Reset RS232/422/485Long RangeTermination
PWR1
PWR2
LAN
WLAN
Serial
(V+ V- )WLAN LAN PWR2 PWR1
Wireless Device Server
124.
00
www.korenix.com249
JetPort 5801 1-port RS-232/422/485 Wireless Serial Device Server
Includes:
1-port RS-232/422/485 Wireless Serial Device Server with Antenna
Quick Installation Guide
100~240VAC power adapter
Din-Rail kit and foot pads
Documentation and Software CD-ROM
Reset: Software reload default, Hardware reset buttonBeeper: Embedded beeper for positioningSNTP: For time managementAccess IP Table: 16 IP addresses to prevent illegal usersMonitor: Devices’ status, VCOM statusE-Mail Alert: Automatic e-mail warning by pre-defined eventsSystem Log: Trap to Syslog server or local displaySystem Events: Cold/Warm Start, Login Failed, IP and Password Changed, Access IP Blocked, Serial Port DCD/RI/DSR/CTS changed, Serial Port connected/disconnectedSNMP: RFC1213 MIB II, RFC1317 RS232_like and SNMP TrapWindows UtilityJetPort Commander: Device Discovery, Auto IP, Network Setting(Wire and Wireless), Device and Serial Port Setting and monitoring, Notification setting, Firmware Upgrade, Configuration Backup and Restore, Group Configuration WizardsSerial Service Mode: Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDPAdvanced Serial Setting: TCP Alive Check Timeout, Inactivity Idle Timeout, Performance mode, Delimiter, Force TX Timeout for Data Packing and Force TX interval timeGroup Configuration Wizard: JetPort Commander: Group IP Wizard, Group firmware upgrade, Group Backup/Restore, VCOM and TCP Tunnel Setup WizardPower RequirementsSystem Power:PWR1: 12~48VDC Terminal BlockPWR2: 12~48VDC Power Jack with Power AdapterPower Line protection:1 KV Burst (EFT), EN61000-4-40.5 KV Surge, EN61000-4-5Power Consumption: Maximum 4.8 WattsMechanicalDimensions: 96.1mm(W)x124mm(D)x29.6mm(H)Regulatory Approvals: FCC Class A, CE Class A , UL, RoHSEnvironmentalOperating Temperature: -10 ~ 55OCOperating Humidity: 5% ~ 95%, (non-condensing)Storage Temperature: -20 ~ 70OCWarranty: 3 years
Network InterfaceWLAN Standard: 802.11b/g WLANSpread Spectrum Technology: DSSS(802.11b), OFDM(802.11g)Tx Power: 13-17dBm at maximum radiation directionRx Sensitivity: -71 dBm @ 54 Mbps, -84 dBm @ 11MbpsTransmission Rate: 54 Mbps (max.) with auto fallback (54,48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps)Transmission Distance: Up to 100 meters (open area)Antenna: Supports the antenna diversity functionEthernet: 1* 10/100BaseTX, Auto MDI/MDI-XConnector: RJ-45Protection: Built-in 1.5 KV magnetic isolation protectionSerial CommunicationNumber of Ports: 1Interface: RS-232, RS422, 2/4-wire RS485Connectors: male DB9Baud Rates: 110 bps to 230.4K bpsData Bits: 5, 6, 7, 8Parity: odd, even, noneStop Bits: 1, 1.5, 2RS-232: TxD, RxD, RTS, CTS, DTR, DSR, GND, DCDRS-422: Tx+,Tx-, Rx+, Rx-,GNDRS-485 (4-wire): Tx+,Tx-, Rx+, Rx-,GNDRS-485 (2-wire): Data+, Data-,GNDFlow Control: XON/XOFF, RTS/CTS, DTR/DSRSerial Line Protection: 15KV ESDLong Distance Termination: 2*pin 120ohm DIP switchesFeaturesProtocols: IP, TCP, UDP, ICMP, DHCP, BootP, ARP/RARP, SNMP, HTTPS, SSH, SNTP, SMTP, LED: Power 1/Power 2: Startup(Red); Ready(Green)LAN : 10M Link(Orange), 100M Link(Green)WLAN: Good Link Quality(Green), Poor Link Quality (Orange)Serial: Transmitting data(Green), Receiving data(Orange)Configuration: JetPort Commander, HTTPS, SSHSerial Service: Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDPWLAN Discover: 5 AP listWLAN Strength: 5 LevelsWLAN Security: WEP 64-bit/128-bit data encryption, WPA Personal mode (AES/TKIP)
Specification
Ordering Information
Serial Device Server
www.korenix.com 250
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
The JetPort 5201 is a smart one RS-232 to Ethernet device server. The serial speed can be as fast as 460.8kbps. The serial port can be configured as Virtual Com, Serial tunnel, TCP server, TCP client, and UDP mode to communicate with Ethernet. The JetPort 5201 supports up to 5 simultaneous Virtual COM, TCP server, TCP client connections for critical redundant solution. The JetPort Commander is an easy-to-use utility for
Windows that covers all management, monitoring, and control functions for one or many JetPort servers. Setting up 100 JetPort can be as easy as setting up one JetPort. In addition to Windows configuration, the JetPort can be configured by Web and Telnet, giving administrators the flexibility for device management. The JetPort 5201 can be wall mounted or din-rail mounted by the din-rail kit.
Industrial 1-port RS-232 Serial Device Server
Single, compact RS-232 to Ethernet SolutionHigh serial speed up to 460.8kbpsJetPort Commander, Windows utility for auto discovery, device configuration, multiple devices setup wizard and monitoringVersatile serial operation options: Virtual Com, Serial tunnel, TCP server, TCP client, UDPUp to 5 simultaneous serial connectionsConfiguration by Windows, Web and TelnetEvent warning by Email, SNMP trap and SyslogVirtual COM driver for Windows 2000/XP/2003/Vista
RoHS
The JetPort 5201 is a small RS-232 to Ethernet Device Server. The JetPort 5201 is equipped with compact form-factor, 54.4mm(W) x 79.5mm(H) x22mm(D), which can be easily installed in the industrial or office network.
Small, Compact and Easy to UseIf a network environment simply needs a RS-232 interface, the JetPort 5201 is the handy solution with the easy-to-use management methods, the serial speed can support as fast as 460.8Kbps.
JetPort 5201
Overview
www.korenix.com251
The JetPort supports flexible serial communication modes, including virtual com, TCP server, TCP client, UDP, and serial tunnel. The advanced settings for controlling the data communications such as TCP alive check, delimiter, and timeout are also
The Jetport 5201 supports Event warning when the pre-configured events occur; the system will send E-mail, SNMP trap and Syslog to administrators. With the event warning, administrators will be notified if
Event Warningthere is a change of the status on the field; thus, they're able to take the corresponding action within a short time.
Flexible Serial Configurationsupported. For industrial redundant solutions, The JetPort supports to maximum 5 simultaneous connections as maximum for virtual com, TCP server, TCP client modes, sending to 5 hosts simultaneously.
JetPort 5201 Appearance Dimensions
5201
PWR/Ready
TX/RX
Link/ACT
RS232
10/100MEthernet
Reset 9-30 VDC
Serial Device Server
LEDPower, EthernetSerial TX/RX
10/100M EthernetAuto MDI/MDIX
Mounting Ear
Power 9~30 VDC
Reset
1 RS-232 port, DB9 Serial Connector
Hassle-Free ConfigurationThe JetPort Commander allows users to discover all JetPorts in a LAN and configure/monitor one or multiple JetPorts simultaneously. All configurations
are run-time changes without re-booting the device. The JetPort also supports web/telnet console and SNMP for extended network managements.
Serial Device Server
www.korenix.com 252
Industrial
PoE Switch
IP67/68
Ethernet Switch
Rackmount
Managed
Switch
Gigabit Switch
Redundant
Switch
Entry-Level
Switch
Networking
Computer
Communication
Computer
Ethernet
I/O Server
Serial Device
Server
Media
Converter
Multiport
Serial Card
SFP Module
Din Rail
Power Supply
JetPort 5201 1-port RS-232 Serial Device Server
Includes:
1-port RS-232 Serial Device Server
Quick Installation Guide
100V ~ 240V power adapter
Din-Rail kit and foot pads
Documentation and Software CD-ROM
System Log: Trap to Syslog server or local displaySystem Events:Cold/Warm Start, Login Failed, IP and Password Changed, Access IP Blocked, Serial Port DCD/RI/DSR/CTS changed, Serial Port connected/disconnected.Windows UtilityJetPort Commander:Device Discovery, Auto IP, Network Setting, Device and Serial Port Setting and monitoring, Notification setting, Firmware Upgrade, Configuration Backup and Restore, Group Configuration Wizards.Serial Service Mode:Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDPAdvanced Serial Setting:TCP Alive Check Timeout, Inactivity Idle Timeout, Performance mode, Delimiter, Force TX Timeout for Data Packing and Force TX interval timeGroup Configuration Wizard:JetPort Commander: Group IP Wizard, Group firmware upgrade, Group Backup/Restore, VCOM and TCP Tunnel Setup WizardPower RequirementsSystem Power:DC Jack: 9-30VDC Power Line protection:1 KV Burst (EFT), EN61000-4-40.5 KV Surge, EN61000-4-5Power Consumption: Maximum 2.6 Watts MechanicalDimensions: 78.5mm(W)x79.6mm(D)x29.2mm(H)EnvironmentalOperating Temperature: 0 ~ 60OCOperating Humidity: 5% ~ 95%, (non-condensing)Storage Temperature: -40 ~ 85OCWarranty: 5 years
Network InterfaceEthernet: 1 x 10/100 Base TXConnector: RJ-45Feature: Auto MDI/MDI-X, 10/100M Auto-NegotiationProtection: Built-in 1.5 KV magnetic isolation protectionProtocols: IP, TCP, UDP, ICMP, DHCP, BootP, ARP/RARP, Telnet, SNMP, HTTP, SNTP, SMTPSerial CommunicationNumber of Ports: 1Interface: RS-232Connectors: Male DB9Baud Rates: 110 bps to 460.8K bpsData Bits: 5, 6, 7, 8Parity: odd, even, noneStop Bits: 1, 1.5, 2RS-232: TxD, RxD, RTS, CTS, DTR, DSR, GND, DCDFlow Control: XON/XOFF, RTS/CTS, DTR/DSRSerial Line Protection: 15KV ESDFeaturesLED:Power: Startup(Red); Ready(Green)Ethernet : 10M Link(Orange), 100M Link(Green)Serial: Transmitting data(Green), Receiving data(Orange)Configuration: Windows Utility-JetPort Commander, HTTP, TelnetSerial Service: Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDPReset: Software reload default, Hardware reset buttonSNTP: For time managementAccess IP Table: 16 IP addresses to prevent illegal usersMonitor: Devices’ status, VCOM statusSNMP: RFC1213 MIB II, RFC1317 RS232_like and SNMP TrapE-Mail Alert: Automatic e-mail warning by pre-defined events
Specification
Ordering Information